All

Sun-F A-048 ATV utility tyres.

Features:

• 6 Ply Rated
• Extended-wear rubber compound for even longer life and better value
• Tread design with deep knobs delivers extraordinary traction for enhanced performance
• Aggressive shoulder knobs provide excellent side bite and grip
• Puncture resistant

SUN-F R-002 Suitable for Lawn equipment, etc.

This Supersprox-Alloy sprocket has all the features you would expect and more.

• 7075-T6 Aerospace aluminium, for maximum durability.

• CNC machined to incredibly tight tolerances, that allow perfect concentricity and accuracy of fi t.

• The Works-Light design has allowed optimum weight reduction, whilst keeping the product super

strong. Its 67% lighter than steel sprocket!

• Supersprox patented tooth profi le will increase chain life up to 15%. Chain vibration (slap) will

reduced. Giving smoother acceleration.

• The exceptionally hard wearing surface and dirt grooves will give signifi cantly increased chain

wheel life. It will outlast the competition.

• The anodised anti corrosion surface is technical and attractive. Its hard coating aids prolonged

system life.

• Perfect for Supercross, Motocross and Off Road bikes.

 Fitments can be found in the 'Fitments' guide on this website 

Note: Some sprockets may be supplied in Vaz or Reikon until stock is replaced by Supersprox

What is the Supersprox-stealth about?
Supersprox-stealth is about longer life, without compromising weight. Primary goal, to last 3 times longer than aluminum and remain as light as possible. No concession, it's performance and function first and last.

Better than steel!
Supersprox-stealth is infinitely better than steel! You just can’t achieve this level of strength on a steel sprocket with the same weight. Sure, there are light steel sprockets out there, but they can’t handle the torque. Pound (lb) for foot pound (ft/lbs), Supersprox-stealth is the best.

Better than aluminium sprockets!
OK, this is no contest! Try 30,000 km on a Hayabusa with an aluminium sprocket or the whole Dakar rally on one sprocket. What about the Baja 1000? These are extremes and factory teams actually buy Supersprox-stealth for these gruelling challenges. Don’t waste your money on aluminium, invest in Supersprox-stealth.

Will a steel sprocket damage my chain?
Kind of stupid sounding question, but there’s a lot of misinformation out there. So, think about bearings for example. They`re steel on steel and that works pretty well. Steel on steel is the best combination. So when someone tells you different, you should ask if they only sell aluminium. We guarantee our sprockets. If they don’t do what we claim, you can have your money back.

Are the rivets strong enough?
There is no doubt, riveting is the only possibility for fixing such a high performance sprocket. We know how to use this technology, forging rivets into the sprockets. We have never had one single rivet break since starting to produce these sprockets. That’s 1,260,000 rivets.

It’s for your bike!
Its perfect for any bike up to 1400 cc. Do you have a powerful 4 stroke or performance street bike? Covering high mileage or road racing, then this is your best option. A single sprocket can last more than 30,000 km (See maintenance instructions). Whatever your bike, if you want peace of mind and the knowledge that you have the best of the best, then choose Supersprox-stealth.
 

Supersprox Steel Rear Sprockets
Supersprox steel rear sprockets are produced from the highest grade SC45 steel. All sprockets come with an attractive anti corrosive zinc plated finish just like a genuine OEM sprocket. Many of these sprockets are supplied as OE fitment. KTM, Husqvarna, Honda are just a few.

Supersprox Steel Front Sprockets
Supersprox hardened countershaft sprockets are fully machined using the newest leading edge technology. The sprockets are hardened to 55Rc. All sprockets are then polished using a ceramic media to produce a truly excellent finish.

Measurement:
Supersprox have two preferred ways of measuring their sprockets. Firstly they have their own inhouse quality control procedures, which specify the type of measurement and the tools that they use to check the parts. This may typically be done with a digital vernier or a micrometer.

Secondly, one sprocket from each batch is tested with a ZIESS 450m computer controlled measuring machine. This allows them to have accurate measurements 4 places after the decimal point (0.000x).

Testing:
Supersprox also has a testing program for material that enables them to analyse the specific characteristics like the tensile strength. This is carried out on each new batch of material that arrives into their factory. When a material batch has been tested the number relating to that batch of materials is then printed onto all production cards. The results of this testing are stored for 7 years, so that they have a chance to look back if there are any problems.

Supersprox sprockets offer superior quality and performance.

Fitments can be found in the 'Fitments' guide on this website 

Note: Some sprockets may be supplied in Vaz or Reikon until stock is replaced by Supersprox

A CHINO SHORT BUILT FOR MOBILITY AND COMFORT 

The Teton Chino Short uses a durable stretch cotton/nylon main material with a DWR coating for an excellent combination of utility and style. The integrated nylon web belt provides a secure fit and keeps the shorts in place no matter where your adventure takes you.

FEATURES

• Soft stretch cotton/nylon ation
• Convenient elastic pull-on waistband for added comfort
• Integrated nylon web belt with slide adjustor for a secure fit
• Zippered back welt pocket for secure storage
• Internal knife pocket
• Interior gusset for extra mobility

Designed, tested, and 100% skateboarding approved by Emerica pro Leo Romero, this updated version of the Emerica classic Laced features a low profile cupsole for increased boardfeel, Emerica Triangle Tread pattern with high-density rubber heel drag pod for maximum grip and durability, and a tongue stabilizing wing for a snug fit if you decide to grind up a rail. Boo-yeah!

• Cupsole construction
• Die cut eva insole
• Stitch & turned quarter vamp
• Tongue stabilizer
• Triangle Tread
• Suede/Canvas

Designed, tested, and 100% skateboarding approved by Emerica pro Leo Romero, this updated version of the Emerica classic Laced features a low profile cupsole for increased boardfeel, Emerica Triangle Tread pattern with high-density rubber heel drag pod for maximum grip and durability, and a tongue stabilizing wing for a snug fit if you decide to grind up a rail. Boo-yeah!

• Cupsole Construction
• Tongue Stabilizer “Wings”
• Die Cut Eva Insole
• Stitch And Turned Quarter/Vamp
• Triangle Tread Outsole

Simple and efficient, Toplite’s line of 12 volt conventional batteries carry the unparalleled quality of any battery bearing the Toplite by Yuasa name.

Features:

• Special thin separators which provide high cranking power

• Engineered to protect against corrosion, withstand vibration, and deliver high cranking power

Find the correct fitment for your motorcycle here: Toplite-Yuasa Fitment Guide

Simple and efficient, Toplite’s line of 12 volt 'YuMicron' high performance conventional batteries carry the unparalleled quality of any battery bearing the Toplite by Yuasa name.

Features:

• Heat sealed case protects against seepage and corrosion

• Special thin separators provides high cranking power

• Heavy-duty glass mat resists shredding of active material even under severe vibration

Find the correct fitment for your motorcycle here: Toplite-Yuasa Fitment Guide

Toplite’s elite performer, the AGM series, has more cranking amps and higher amp hour capacity for years of trustworthy service. Absorbed Glass Mat (AGM) batteries look different from typical powersports battery types because they are built differently. This advanced battery design eliminates water loss. Once these batteries are filled with acid, you’ll never need to fill it with water or check the acid level. This specific line is optimized to run strong without maintenance. Essentially this is the ultimate “set it and forget it” battery.

YTX(H) Series Battery Features:

• H Series – increased power, up to 30% more CCA over YTX Series
• Premium absorbed glass mat (AGM) technology
• Sealed, non-spillable design
• Meets or exceeds OEM specs
• Maintenance free – NEVER add water, but periodic charging required when not in use
• Engineered to protect against corrosion, withstand vibration, and deliver high cranking power
• Polypropylene cover and container – superior resistance in extreme conditions of cold and heat, more flexible than ABS material

TTZ Series Battery Features:

• Ideal for sport bike applications
• High CCA in a compact size
• Lightweight design
• Enhanced capacity recovery
• Expanded grid design for superior reliability
• Premium absorbed glass mat (AGM) technology
• Sealed, non-spillable design
• Meets or exceeds OEM specs
• Maintenance free – NEVER add water, but periodic charging required when not in use
• Engineered to protect against corrosion, withstand vibration, and deliver high cranking power
• Polypropylene cover and container – superior resistance in extreme conditions of cold and heat, more flexible than ABS material

Find the correct fitment for your motorcycle here: Toplite-Yuasa Fitment Guide

Toplite’s elite performer, the AGM series, has more cranking amps and higher amp hour capacity for years of trustworthy service. Absorbed Glass Mat (AGM) batteries look different from typical powersports battery types because they are built differently. This advanced battery design eliminates water loss. Once these batteries are filled with acid, you’ll never need to fill it with water or check the acid level. This specific line is optimized to run strong without maintenance. Essentially this is the ultimate “set it and forget it” battery.

YT Series Battery Features:

• Premium absorbed glass mat (AGM) technology
• Sealed, non-spillable design
• Meets or exceeds OEM specs
• Maintenance free – NEVER add water, but periodic charging required when not in use
• Engineered to protect against corrosion, withstand vibration, and deliver high cranking power
• Polypropylene cover and container – superior resistance in extreme conditions of cold and heat, more flexible than ABS material

YTX Series Battery Features:

• Improved CCA over YT Series
• Premium absorbed glass mat (AGM) technology
• Sealed, non-spillable design
• Meets or exceeds OEM specs
• Maintenance free – NEVER add water, but periodic charging required when not in use
• Engineered to protect against corrosion, withstand vibration, and deliver high cranking power
• Polypropylene cover and container – superior resistance in extreme conditions of cold and heat, more flexible than ABS material

Find the correct fitment for your motorcycle here: Toplite-Yuasa Fitment Guide

Simple and efficient, Toplite’s line of 6 volt conventional batteries carry the unparalleled quality of any battery bearing the Toplite by Yuasa name.

Features:

• Special thin separators which provide high cranking power

• Engineered to protect against corrosion, withstand vibration, and deliver high cranking power

Find the correct fitment for your motorcycle here: Toplite-Yuasa Fitment Guide

Clip (Conn) type link for Tsubaki Gamma 415 Chain.

Clip (Conn) type link for Tsubaki Gamma 420 Chain.

This high quality non-sealed chain has been manufactured specifically for professional MX usage. The MX-Pro features eliminates kinking and seizure in abrasive and muddy conditions by applying chromized pins and riveted bushings. The MX-Pro chain distinguishes itself by its gold coloured link plates.

Available in a range of pitches and lengths.

420 MX Pro Chain - Average Tensile Strength 19kN, Rated for >85cc

Clip (Conn) type link for Tsubaki MX Pro 420 Chain.

Tsubaki's Alpha ORS series is injected with a high viscosity vacuum grease during the manufacturing process, thereby improving the heat dissipation and substantially reduces the mechanical stresses. The presence of low friction O-rings limit the power losses through friction and increases longevity significantly

Available in a range of pitches and lengths.

428 Alpha ORS Chain - Rated for 65HP

Clip (Conn) type link for Tsubaki Alpha O-Ring 428 Chain.

Key features of this chain are a long lasting performance with low maintenance. This chain benefits from the TX4-seal rings and life-time lubrication of inner parts. Executed in a sleek designed plain steel version.

Available in a range of pitches and lengths.

428 Alpha XRS Chain - Average Tensile Strength 27kN, Rated for 80HP

The Tsubaki Gamma series is an economical quality roller chain (solid rollers) which is suitable for less powerful bikes. The press-fit, quad-stake riveted pins add additional strength to this chain.

Available in a range of pitches and lengths.

428 Gamma Chain - Average Tensile Strength 24kN, Rated for 30HP

Clip (Conn) type link for Tsubaki Gamma 428 Chain.

This high quality non-sealed chain has been manufactured specifically for professional MX usage. The MX-Pro features eliminates kinking and seizure in abrasive and muddy conditions by applying chromized pins and riveted bushings. The MX-Pro chain distinguishes itself by its gold coloured link plates.

Available in a range of pitches and lengths.

428 MX Pro Chain - Average Tensile Strength 25kN, Rated for >125cc

Rivet (Pin) type link for Tsubaki Alpha X-Ring Gold 520 Chain.

Clip (Conn) type link for Tsubaki Gamma 520 Chain.

Rivet (Pin) type link for Tsubaki Gamma 520 Chain.

This premium chain has proven itself by its performance according to the appraisal of many professional MX-racing teams. Smooth running with a minimum of power loss combined with the benefits of sealed-off inside lubrication which gives a longer chain lifespan. The gold coloured plating of the outer links provide some corrosion protection next to an attractive appearance.

Available in a range of pitches and lengths.

520 MX Alpha XRG Chain - Average Tensile Strength 36kN, Rated for >650cc

Clip (Conn) type link for Tsubaki MX Pro 520 Chain.

Rivet (Pin) type link for Tsubaki Omega O-Ring 520 Chain.

Rivet (Pin) type link for Tsubaki Racing Pro 520 Chain.

Our RQR series is developed exclusively for racing purposes. This chain has been used on factory bikes in the World Superbike Championships and is a proven Isle of Man TT winner.

• The choice of teams and riders in the world's leading championships
• Very rigid and high tensile strength, yet lightweight chain
• Pre-stretched to minimize elongation after first adjustment
• Available exclusively in size 520 x 120

Rivet (Pin) type link for Tsubaki RQR Racing 520 Chain.

A third generation series, developed to meet the demand of OE-engineers for a light running, long lasting chain with high tensile strength, for current high performing machines. TX4 seal rings keep lubricant in and dirt out of the inner parts. Sleek design with gold coloured link plates distinguishes its appearance.

Available in a range of pitches and lengths.

525 Alpha XRG Chain - Average Tensile Strength 38kN, Rated for 135HP

Clip (Conn) type link for Tsubaki Gamma 525 Chain.

Rivet (Pin) type link for Tsubaki Gamma 525 Chain.

The Omega offers you an affordable quality sealed O-ring chain, press-fit pins with quad-stake riveting. O-ring chain with good value for the money!

Available in a range of pitches and lengths.

530 Omega Chain - Average Tensile Strength 39kN, Rated for 100HP

Holeshot tearoffs for use with Vue Roll Off System, great for the first few laps when roost is hectic!

• Tear offs should be mounted so that the pull tabs are on the riders left side
• For use with Fox Vue goggles only
• 14 per pack
• Note - these fit to the Vue Roll Off system, they will not fit on a standard goggle lens. 

Santa Cruz Skateboards were established in 1973. Santa Cruz has long been revered as one of the original skateboard companies that has not only survived the years but contributed innovation and modernization of skateboards and skateboarding. It was a no brainer when the idea was brought up to create a special collection between the two brands. Emerica and Santa Cruz have not only deep roots in skateboarding but both have made a serious impact in the skateboard industry past and present.

• Double Wrapped Foxing
• Heel Anchor System
• Drop-In G6 PU
• Triangle Tread Outsole With Santa Cruz Artwork
• Artwork On Insole
• Poly-Canvas

The Wino G6 Slip-On builds upon the Wino G6, infusing it with a G6 PU Insole for first-rate cushioning, Double Wrapped Vulc Construction for more board feel, and Emerica’s Fit Heel Anchor System. Provost and Dickson backed and approved.

• Double Wrapped Foxing
• Heel Anchor System
• Drop in G6 PU insole
• Triangle Tread Outsole

Santa Cruz Skateboards were established in 1973. Santa Cruz has long been revered as one of the original skateboard companies that has not only survived the years but contributed innovation and modernization of skateboards and skateboarding. It was a no brainer when the idea was brought up to create a special collection between the two brands. Emerica and Santa Cruz have not only deep roots in skateboarding but both have made a serious impact in the skateboard industry past and present.

• Single Wrapped Vulcanized Construction
• Die-Cut EVA Footbed
• One Piece Vamp
• Triangle Tread Outsole
• Santa Cruz Artwork
• Suede/ Microfiber

The Wino Standard is a low profile vulcanized skate shoe. This shoe provides ultimate board feel and flexibility. Belonging to the Wino family, this shoe is durable and tough. You won't be disappointed.

• Single Wrapped Vulcanized Construction
• Die Cut EVA Footbed
• One Piece Vamp
• Triangle Tread Outsole

TRAIL-SPECIFIC, COMFORTABLE MOUNTAIN BIKE SOCKS. With their fun look designed to match your specific brand of rowdiness, these Youth 6" Ranger Crew Socks get that your feet were not meant to suffocate while you get your shred on. The mesh zones of these socks provide exceptional breathability and ventilation, without breaking your budget. When the trail gets rough, the cushioned heel and toe bring the comfort, while the rib-knit upper will ensure these socks stay exactly at the height you pulled them up to.

• Mesh zones provide added breathability 
• Compression arch support for superior fit and comfort 
• Rib-knit upper won’t slide down when the trail gets rough 
• Flat-stitch toe construction offers improved comfort 
• 69% polyamide nylon, 15% cotton, 11% polyester, 5% elastane

If you spend time in the mountains, trails or generally love life in the outdoors, then a solid flannel is a must-have. Our take on the winter essential - the Women's Burnett Lined Flannel - boasts a cotton construction and with the extra warmth of a cozy polyester taffeta lining. The melamine logo buttons and dual chest pocket make this style an instant classic.

• Women's lined flannel
• Front button closure
• 2 chest button pockets
• Sherpa on interior collar

A COMFORTABLE AND COZY HOODIE

In cool seasons warm up with the Women's Centered Pullover hoodie. Made with a soft cotton/polyester fleece, this pullover hoodie is perfect for early starts or chilly evenings. The Fox Head screenprint on the back and silicone coated eyelets and aglets elevate the design.

• Effortless pullover design
• Drawcord hood for adjustable coverage
• Soft and warm cotton fleece blend
• Front kanga pocket for hand warmth
• Silicone coated eyelets & aglets
• Large Fox Head print on back
• Fox Head clamp label at side seam
• Moto-X Fox artwork on chest

A PERFORMANCE LEGGING AN MX-INSPIRED DESIGN

Inspired by our legendary women’s MX pants, the Edison Moto Legging combines a strikingly detailed look with moisture-wicking performance to keep you dry and comfortable all day long.

• Moisture wicking performance keeps you dry and comfortable
• Inset ribbing at knee for extra articulation and comfort
• Side seam slip pocket for easy access and convenient storage
• Mid-rise flat waistband for a flattering shape and extra comfort
• Fox & Fox Head heat transfer at hip

COZY FLEECE WITH LARGE CENTER FRONT GRAPHIC

• Side seam tunnel pocket for extra storage and warmth
• Screenprint artwork

COZY FLEECE WITH LARGE CENTER FRONT GRAPHIC

• Side seam tunnel pocket for extra storage and warmth
• Screenprint artwork

CLASSIC YOUTH CHINO SHORTS

The Youth Essex 2.0 Short features a comfortable and durable construction and a clean silhouette perfect for your youngster's daily adventures.

FEATURES

• Durable twill with garment wash
• Fox woven label

FABRIC

• 98% cotton / 2% elastane, 215g

CLASSIC YOUTH CHINO SHORTS

The Youth Essex 2.0 Short features a comfortable and durable construction and a clean silhouette perfect for your youngster's daily adventures.

FEATURES

• Durable twill with garment wash
• Fox woven label
• 98% cotton / 2% elastane, 215g

Our best selling color way, the V1 Youth Matte Black helmet features our exclusive Magnetic Visor Release System™ (MVRS) to manage rotational forces. This pro-level, patent-pending feature removes the three visor screws and replaces them with magnets to allow the visor to release from the helmet in the event of a crash, while also securely staying in place when needed.

The design offers best-in-class airflow for improved comfort and moisture management in warm riding conditions. The V1 is second to none in fit with 4 specific shell and EPS sizes for a more true-to-size fit and feel. The V1 comes complete with a removable and washable liner and cheek pads for comfort after repeated uses. And of course, it is available in a wide selection of colors and graphics to match nearly any gear set available.

• Magnetic Visor Release System™ (MVRS) releases in the event of a crash
• Lightweight Injection molded polycarbonate & ABS shell construction disperses energy in the event of a crash
• 1 shell and 1 EPS size
• Removable and washable comfort liner and cheek pads
• 9 intake and 4 exhaust vents for optimum airflow
• Exceeds ECE 22.05 and/or DOT certifications

Youth Small 47-48cm

Introducing the WHIT3 Label Jersey from our Mexico Collection. The second drop in a series of four destination-inspired collections, this limited edition gearset celebrates the Dia de Los Muertos festival in the city of Guadalajara, Mexico. The jersey's aesthetic takes cues from the historic cathedrals and their decorative gold details, the red brick buildings found throughout the city, and the black costumes worn during the festival. Fittingly, the racewear is cloaked in black, and accented with dark brick red and contrasting gold trim for a look that is sure to stand out.

The White Label Jersey features a bevy of performance features and stunning graphics. The main body fabric is lightweight, yet durable and features wicking properties to keep you drier and cooler during your ride. An easy-fitting silhouette keeps you relaxed and uninhibited on the bike. And ventilated side panels deliver unreal comfort all season long.