Helmet Hardware

Replacement peak for the AGV AX-8 DUAL EVO.

Replacement peak for the AGV AX-9.

Replacement peak for the AGV AX9.

Replacement peak for the AGV AX9 short version.

ISV scratch resistant internal sunvisor. Compatible with: K5 S, K3 SV.

ISV scratch resistant internal sunvisor. Compatible with: K5 S, K3 SV.

Replacement for the Pista GP RR or Pista GP R Pro Spoiler. Colour: Black. Plastic screws included.

Replacement for the Pista GP RR or Pista GP R Pro Spoiler. Colour: Clear. Plastic screws included.

Replacement for the Pista GP RR or Pista GP R Pro Spoiler. Colour: Smoke. Plastic screws included.

Replacement visor mechanism system for AGV Pista GP, Pista GP R and Pista GP RR, Corsa and Corsa R models. Includes screws.

AGV Race 3 scratch resistant, Max Pinlock ready visor. Compatible with: Pista GP RR, Pista GP R and Corsa R. Tear-off system ready. Visor fixing screws included.

Features:

• 190° horizontal field of view
• 5mm thickness
• 85° vertical field of view
• Anti-scratch
• Max Pinlock ready
• Night use allowed
• Optic class 1
• Tear-off ready
• UV protective

We offer removable cheek pads for our ECE-certified R22.05 Gringo and Gringo S helmets so you can replace old, dirty ones or fine-tune comfort with a thinner or thicker set depending on your preference.

Note: These cheek pads will not work with the new ECE R22.06 Gringo S or Gringo SV helmets. We will have replacement cheek pads for the new ECE R22.06 Gringo S and Gringo SV available soon! 

Features:

• Brushed fleece Lycra material wicks sweat from skin for greater comfort
• Open-cell foam inside pads increases airflow and accelerates drying
• Stainless-steel snaps on ABS plastic pad backing for speedy removal and installation
• Hand-stitched construction
• Available in different thicknesses for a custom fit—see chart in photos
• Sold in pairs

Care & Maintenance:

Never clean helmet comfort liner components in the washer or dryer. Instead, simply immerse them in soapy water and gently squeeze them to release dirt and oils. To dry, loosely wrap the wet pads in a plush towel and gently squeeze them to absorb excess moisture, then hang them to air dry. Wait 24 hours before reinstalling clean pads in your helmet.

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in stainless steel screws and anodized washer colours so you can fine-tune the look of your lid.

Features:

• Kits fit Gringo S and Lane Splitter helmets to compliment or replace stock components
• Stamped alloy washers with anodized finish
• Stainless steel screws feature thread lock compound already applied
• Each kit includes two screws and two washers

Install Tips:

Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN.

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in stainless steel screws and anodized washer colours so you can fine-tune the look of your lid.

Features:

• Kits fit Gringo S and Lane Splitter helmets to compliment or replace stock components
• Stamped alloy washers with anodized finish
• Stainless steel screws feature thread lock compound already applied
• Each kit includes two screws and two washers

Install Tips:

Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN.

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in stainless steel screws and anodized washer colours so you can fine-tune the look of your lid.

Features:

• Kits fit Gringo S and Lane Splitter helmets to compliment or replace stock components
• Stamped alloy washers with anodized finish
• Stainless steel screws feature thread lock compound already applied
• Each kit includes two screws and two washers

Install Tips:

Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN.

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in stainless steel screws and anodized washer colours so you can fine-tune the look of your lid.

Features:

• Kits fit Gringo S and Lane Splitter helmets to compliment or replace stock components
• Stamped alloy washers with anodized finish
• Stainless steel screws feature thread lock compound already applied
• Each kit includes two screws and two washers

Install Tips:

Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN.

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in stainless steel screws and anodized washer colours so you can fine-tune the look of your lid.

Features:

• Kits fit Gringo S and Lane Splitter helmets to compliment or replace stock components
• Stamped alloy washers with anodized finish
• Stainless steel screws feature thread lock compound already applied
• Each kit includes two screws and two washers

Install Tips:

Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN.

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in stainless steel screws and anodized washer colours so you can fine-tune the look of your lid.

Features:

• Kits fit Gringo S and Lane Splitter helmets to compliment or replace stock components
• Stamped alloy washers with anodized finish
• Stainless steel screws feature thread lock compound already applied
• Each kit includes two screws and two washers

Install Tips:

Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN.

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in stainless steel screws and anodized washer colours so you can fine-tune the look of your lid.

Features:

• Kits fit Gringo S and Lane Splitter helmets to compliment or replace stock components
• Stamped alloy washers with anodized finish
• Stainless steel screws feature thread lock compound already applied
• Each kit includes two screws and two washers

Install Tips:

Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN.

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in stainless steel screws and anodized washer colours so you can fine-tune the look of your lid.

Features:

• Kits fit Gringo S and Lane Splitter helmets to compliment or replace stock components
• Stamped alloy washers with anodized finish
• Stainless steel screws feature thread lock compound already applied
• Each kit includes two screws and two washers

Install Tips:

Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN.

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in stainless steel screws and anodized washer colours so you can fine-tune the look of your lid.

Features:

• Kits fit Gringo S and Lane Splitter helmets to compliment or replace stock components
• Stamped alloy washers with anodized finish
• Stainless steel screws feature thread lock compound already applied
• Each kit includes two screws and two washers

Install Tips:

Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN.

We offer removable cheek pads for our ECE-certified R22.06 Gringo, Gringo S, and Gringo SV helmets so you can replace old, dirty ones or fine-tune comfort with a thinner or thicker set depending on your preference.

Note: This cheek pad set will fit all ECE Gringo, Gringo S, and Gringo SV helmets but use a different color mesh than the previous ECE 22.05 cheek pads.

Features:

• Brushed fleece Lycra material wicks sweat from skin for greater comfort
• Open-cell foam inside pads increases airflow and accelerates drying
• Stainless-steel snaps on ABS plastic pad backing for speedy removal and installation
• Hand-stitched construction
• Available in different thicknesses for a custom fit—see chart in photos
• Sold in pairs

Care & Maintenance:

Never clean helmet comfort liner components in the washer or dryer. Instead, simply immerse them in soapy water and gently squeeze them to release dirt and oils. To dry, loosely wrap the wet pads in a plush towel and gently squeeze them to absorb excess moisture, then hang them to air dry. Wait 24 hours before reinstalling clean pads in your helmet.

Our modern take on the track-tested MX classic features a short bill to keep the sun out of your eyes and tapered sides for a look that would make Steve McQueen proud.

Features:

• Injection-molded polycarbonate thermoplastic construction
• Vivid in-mold colours
• Three heavy-duty, nickel-plated stainless-steel snaps
• Fits all Biltwell and many other helmets with three snaps on the brow

Care & Maintenance:

Start with the centre snap first, then work your way to the outside. Use mild soapy water and a microfiber cloth to clean your Moto Visor. DO NOT expose the visor to harsh household or petroleum-based chemicals—doing so can damage the surface finish and/or compromise material strength.

Our modern take on the track-tested MX classic features a short bill to keep the sun out of your eyes and tapered sides for a look that would make Steve McQueen proud.

Features:

• Injection-molded polycarbonate thermoplastic construction
• Vivid in-mold colours
• Three heavy-duty, nickel-plated stainless-steel snaps
• Fits all Biltwell and many other helmets with three snaps on the brow

Care & Maintenance:

Start with the centre snap first, then work your way to the outside. Use mild soapy water and a microfiber cloth to clean your Moto Visor. DO NOT expose the visor to harsh household or petroleum-based chemicals—doing so can damage the surface finish and/or compromise material strength.

Our modern take on the track-tested MX classic features a short bill to keep the sun out of your eyes and tapered sides for a look that would make Steve McQueen proud.

Features:

• Injection-molded polycarbonate thermoplastic construction
• Vivid in-mold colours
• Three heavy-duty, nickel-plated stainless-steel snaps
• Fits all Biltwell and many other helmets with three snaps on the brow

Care & Maintenance:

Start with the centre snap first, then work your way to the outside. Use mild soapy water and a microfiber cloth to clean your Moto Visor. DO NOT expose the visor to harsh household or petroleum-based chemicals—doing so can damage the surface finish and/or compromise material strength.

Our modern take on the track-tested MX classic features a short bill to keep the sun out of your eyes and tapered sides for a look that would make Steve McQueen proud.

Features:

• Injection-molded polycarbonate thermoplastic construction
• Vivid in-mold colours
• Three heavy-duty, nickel-plated stainless-steel snaps
• Fits all Biltwell and many other helmets with three snaps on the brow

Care & Maintenance:

Start with the centre snap first, then work your way to the outside. Use mild soapy water and a microfiber cloth to clean your Moto Visor. DO NOT expose the visor to harsh household or petroleum-based chemicals—doing so can damage the surface finish and/or compromise material strength.

We offer removable cheek pads for our Lane Splitter helmet so you can replace old, dirty ones or fine-tune comfort with a thinner or thicker set depending on your preference.

Features:

• Brushed fleece Lycra material wicks sweat from skin for greater comfort
• Open-cell foam inside pads increases airflow and accelerates drying
• Stainless-steel snaps on ABS plastic pad backing for speedy removal and installation
• Hand-stitched construction
• Available in different thicknesses for a custom fit—see chart in photos
• Sold in pairs

Care & Maintenance:

Never clean helmet comfort liner components in the washer or dryer. Instead, simply immerse them in soapy water and gently squeeze them to release dirt and oils. To dry, loosely wrap the wet pads in a plush towel and gently squeeze them to absorb excess moisture, then hang them to air dry. Wait 24 hours before reinstalling clean pads in your helmet.

This replacement part is a simple element that reduces wind noise and airflow inside the helmet by redirecting the wind that normally rushes into the helmet from under the chin bar.

The perfect helmet for any use, featuring a drop down sun visor. Produced in two shell sizes.
This model has an excellent fit and is available in a range of attractive graphics with special comfort fabrics and a quick release micrometric buckle for an enjoyable ride.

Features:

• Injected thermoplastic shell construction
• Multi-density EPS inner
• Quick release anti-scratch Pinlock Max Vision ready visor
• Drop down internal sun visor
• Removable washable interior lining
• Metallic Quick Release Micrometric Buckle
• Front and top air intake vents with rear exhaust
• Aerodynamic shape
• ECE 22.05 certified
• MT-V-14 visor

MT-V-09 replacement visor mechanism, for MT KRE SV helmets.

MT-V-10 replacement visor mechanism, for the MT Synchrony Duo Sport SV helmet.

MT-V-14 replacement visor mechanism, for the MT Targo, Blade 2, Rapide and Revenge 2 helmets.

This MT Stinger is a stylish and protective full face style helmet at a price you'll love. The MT Stinger provides full ECE-certified protection with features such as a durable outer shell designed to resist abrasion and object penetration, an expanded polystyrene (EPS) inner shell to absorb impact energy and a fixed chin bar. The pivoting visor mechanism allows for quick access, and the helmet is held in place with a double 'D' ring chin strap for a confident and secure fitment. The MT Stinger Motorcycle Helmet meets stringent ECE 22-05 testing standards, so you can feel confident you are protected when riding.

Features:

• Multiple density expanded polystyrene (EPS) liner absorbs energy during impact
• Hi-Impact absorption inner shell for further protection
• Pivoting visor mechanism for quick and easy cleaning and face access
• Double "D" Ring chin strap provides secure fitment
• ECE.22.05 approved
• MT-V-12 Pinlock Max visor

The perfect helmet for any use. This model has an excellent fitting and also attractive graphics. Special comfort fabrics.
Can be used like Snowmobile helmet with snow breathguard, snowmobile neck curtain and “double or electric lens”.

Features:

• Aerodynamic Shape
• Homologated Front Protection "P"
• Removable and Washable Pads
• Inner Shell with Hi-Impact Absortion
• Fire Retardant Fabric Lining
• Multiple Density Inner Shell
• Anti Scratch Visor in Optical Polycarbonate
• Quick Release Visor
• Optimum Visor Closing
• Pinlock Ready
• Metallic Quick Release Micrometric Buckle
• Weight 1450g
• MT-V-14 visor

MT’s do-it-all go anywhere helmet. For the urban commute or the long tour, the new Thunder 3 SV will accommodate any ride you throw at it. A multi dimensional fit and available in 2 shell sizes, this helmet will comfortably fit most head shapes. Features an internal drop down visor and a Pinlock Max vision visor.

Avaiable in XS to 3XL

Features:

• 4/5 Star Sharp Rating
• Drop Down Inner Sun Visor
• Hi-Impact Absorption Inner Shell
• Multiple Density EPS Liner
• Optimum Visor Closing
• Homologated Front Protection “P”
• Quick Release Micrometric Buckle
• 2 Outer Shell Sizes
• Pinlock Max Vision Visor
• Removable And Washable Liner
• Optically Correct Anti Scratch Polycarbonate Visor
• Quick Release Visor
• Aerodynamic Design
• Vent System
• ECE/ONU.22.05.P
• NBR7471
• NTC 4533
• ACU Gold Standard
• Glow In The Dark Features
• MT-V-12 Pinlock Max visor