Road Riding Apparel

Adventure riding is about tackling any and every environment you can imagine. From the depths of winter in Otago to riding the Coromandel Loop in the middle of the summer, the Adventure-X is one jacket that can go with you on the entire journey. RST’s innovative removable X-Liner combines waterproof SinAqua protection with a built-in thermal layer, is quick and easy to remove and has been designed to be accommodated in the rear pocket when not in use.

The large vents all over the jacket enable a huge airflow when all fully open, and a water bladder pocket (bladder not included) can keep you hydrated when the going gets tough!

ARMOUR

• CE Certification Rating: AA
• Back Protector: CE Level 2 Back Protector
• Shoulder Armour: CE Level 2
• Elbow Armour: CE Level 2
• Shoulder Cup: TPU

CONSTRUCTION

• Main Outer Material: MaxTex
• Secondary Material: Ballistic
• Waterproof Lining: Removable Quilted Thermal Liner Bonded with Waterproof SinAqua Membrane
• Inner Lining: Fixed Comfort Mesh Lining
• Zips: Max Zips
• Thread: Bonded Nylon - Triple Stitched
• Ventilation: Chest, Arm & Rear Vents
• Connection Zip: Yes - 360º

FEATURES AND BENEFITS

• Adjustment: Waist Adjusters
• Outer Pocket: 2
• Map Pocket: Removable

Adventure riding is about tackling any and every environment you can imagine. From the depths of winter in Otago to riding the Coromandel Loop in the middle of the summer, the Adventure-X is one jacket that can go with you on the entire journey. RST’s innovative removable X-Liner combines waterproof SinAqua protection with a built-in thermal layer, is quick and easy to remove and has been designed to be accommodated in the rear pocket when not in use.

The large vents all over the jacket enable a huge airflow when all fully open, and a water bladder pocket (bladder not included) can keep you hydrated when the going gets tough!

ARMOUR

• CE Certification Rating: AA
• Back Protector: CE Level 2 Back Protector
• Shoulder Armour: CE Level 2
• Elbow Armour: CE Level 2
• Shoulder Cup: TPU

CONSTRUCTION

• Main Outer Material: MaxTex
• Secondary Material: Ballistic
• Waterproof Lining: Removable Quilted Thermal Liner Bonded with Waterproof SinAqua Membrane
• Inner Lining: Fixed Comfort Mesh Lining
• Zips: Max Zips
• Thread: Bonded Nylon - Triple Stitched
• Ventilation: Chest, Arm & Rear Vents
• Connection Zip: Yes - 360º

FEATURES AND BENEFITS

• Adjustment: Waist Adjusters
• Outer Pocket: 2
• Map Pocket: Removable

The Pro Series Adventure-X jacket and jean is a must have for all adventure riding. Upgraded with input from legendary Dakar Rally finisher Mick Extance, (who know's what is needed to make the best motorcycling jeans for
adventure riding!)

This is a high specification jean: It’s double layered. Made from MaxTex – a lightweight high denier synthetic material that offers great protection and is comfortable to wear. Additionally, a Ballistic textile is overlaid over key impact areas along with the triple stitching using a coated bonded nylon thread offers increased abrasion resistance.

A new addition to our newest Adventure jean is the new innovative and removeable X-Liner – a singular lightweight lining which features the quilted thermal liner and the SinAqua waterproof membrane combined together. This along with the superior levels of ventilation in the form of the fixed comfort mesh lining and multiple leg vents ensure superb levels of air flow in and out of the jean, keeping you cool as you ride.

Add in the class leading armour; it has a CE certification rating of A and CE Level 2 knee armour you have a garment ready to protect in the event of any impact. And if that wasn’t enough, hardwearing MAX zips are used throughout the jean and there are stretch motion panels and adjustment points on the arm and waist to offer the most comfortable fit.

From huge ventilation points to CE armour, the RST Adventure-X jean is everything you need a textile adventure motorcycle jean to be and more!

ARMOUR

• CE Certification Rating: A
• Hip Armour: Pocket Only
• Knee Armour: CE Level 2

CONSTRUCTION

• Main Outer Material: Maxtex
• Secondary Material: Ballistic
• Stretch Material: Samtex
• Waterproof Lining: Removable Quilted Thermal Liner Bonded with Waterproof SinAqua Membrane
• Inner Lining: Removable Comfort Mesh Lining
• Zips: Max Zips
• Thread: Bonded Nylon - Triple Stitched
• Ventilation: Yes - Leg Vents
• Connection Zip: Yes - 360º

FEATURES AND BENEFITS

• Reflective Detail: Yes - Reflex Logos
• Adjustment: Velcro Waist Adjusters
• Outer Pockets: 2

The Pro Series Adventure-X Shortleg jean is a must have for all adventure riding. Upgraded with input from legendary Dakar Rally finisher Mick Extance, (who know's what is needed to make the best motorcycling jeans for
adventure riding!)

This is a high specification jean: It’s double layered. Made from MaxTex – a lightweight high denier synthetic material that offers great protection and is comfortable to wear. Additionally, a Ballistic textile is overlaid over key impact areas along with the triple stitching using a coated bonded nylon thread offers increased abrasion resistance.

A new addition to our newest Adventure jean is the new innovative and removeable X-Liner – a singular lightweight lining which features the quilted thermal liner and the SinAqua waterproof membrane combined together. This along with the superior levels of ventilation in the form of the fixed comfort mesh lining and multiple leg vents ensure superb levels of air flow in and out of the jean, keeping you cool as you ride.

Add in the class leading armour; it has a CE certification rating of A and CE Level 2 knee armour you have a garment ready to protect in the event of any impact. And if that wasn’t enough, hardwearing MAX zips are used throughout the jean and there are stretch motion panels and adjustment points on the arm and waist to offer the most comfortable fit.

From huge ventilation points to CE armour, the RST Adventure-X jean is everything you need a textile adventure motorcycle jean to be and more!

ARMOUR

• CE Certification Rating: A
• Hip Armour: Pocket Only
• Knee Armour: CE Level 2

CONSTRUCTION

• Main Outer Material: Maxtex
• Secondary Material: Ballistic
• Stretch Material: Samtex
• Waterproof Lining: Removable Quilted Thermal Liner Bonded with Waterproof SinAqua Membrane
• Inner Lining: Removable Comfort Mesh Lining
• Zips: Max Zips
• Thread: Bonded Nylon - Triple Stitched
• Ventilation: Yes - Leg Vents
• Connection Zip: Yes - 360º

FEATURES AND BENEFITS

• Reflective Detail: Yes - Reflex Logos
• Adjustment: Velcro Waist Adjusters
• Outer Pockets: 2

The RST Reinforced Lumberjack style shirt is CE Certified to Level A. The shirt come with a pocket for a back protector to be added, two outer front pockets, a button down closure which cleverly conceals a zip closure on the inside for added security so that you know that in the event of a crash your shirt won't be popping open. The armour in the shoulders and elbows are both CE Level 1. The jacket is made of HTC with a DuPont™ Kevlar® lining.
 

ARMOUR

• CE Certification Rating: A
• Back Protector: Pocket Only
• Shoulder Armour: CE Level 1
• Elbow Armour: CE Level 1

CONSTRUCTION

• Main Outer Material: Cotton
• Inner Lining: DuPont™ Kevlar®
• Zips: YKK Antique Brass
• Thread: Coates Bonded Nylon - Triple Stitched
• Connection Zip: No

FEATURES AND BENEFITS

• Inner Pockets: 1
• Outer Pockets: 2

Maverick by name; a maverick by nature. Made from a hardwearing MaxTex ballistic outer construction, this textile ladies motorcycle jacket is CE Certified to Level A, with CE certified level 1 back protector, shoulder and elbow armour, offering impact resistance in the event of an incident. An additional safety feature is the reflex reflective print which offer enhanced visibility in poor weather conditions.

The interchangeable liner system is a key characteristic of the RST Maverick Ladies Jacket, offering fantastic versatility when riding. The SinAqua waterproof membrane and quilted thermal liners can be utilised in a variety of ways; jacket with no liners, jacket + thermal liner, jacket with waterproof liner or jacket with both thermal and waterproof linings, so you can take on any weather condition on your ride.

Stretch panels, arm and waist adjusters all support a more comfortable contoured fit. Additional supporting features include MAX zippers, a 360° connection zipper for connecting to any RST garment and multi-pocketed intake and exhaust ventilation areas which can be opened as required to channel airflow in, around and out of the jacket.

All this and we are yet to talk about storage - the multiple internal and outer pockets are ideal for storing valuables such as phones, wallets and keys. Not to mention the fixed rear large map pocket for storing maps and other large documents. The Maverick textile jacket is a great piece of kit offering touring riders the ability to go anywhere come rain or shine.

ARMOUR

• CE Certification Rating: A
• Back Protector: CE Level 1
• Shoulder Armour: CE Level 1
• Elbow Armour: CE Level 1

CONSTRUCTION

• Main Outer Material: MaxTex
• Waterproof Lining: Removable SinAqua Lining
• Thermal Lining: Interchangeable Quilted Thermal Full Lining
• Zips: Max Zips
• Thread: Bonded Nylon - Triple Stitched
• Ventilation: Intake Vents, Outake Vents, Mesh
• Connection Zip: Yes - 360º

FEATURES & BENEFITS

• Reflective Detail: Yes - Reflex Print
• Adjustment: Waist Adjusters
• Outer Pockets: 2
• Map Pocket: Fixed

Maverick by name; a maverick by nature. Made from a hardwearing MaxTex ballistic outer construction, this textile ladies motorcycle jean is CE Certified to Level A, with CE certified level 1 knee armour, offering impact resistance in the event of an incident. An additional safety feature is the reflex reflective print which offer enhanced visibility in poor weather conditions.

The interchangeable liner system is a key characteristic of the RST Maverick Ladies Jean, offering fantastic versatility when riding. The SinAqua waterproof membrane and quilted thermal liners can be utilised in a variety of ways, so you can take on any weather condition on your ride.

Stretch panels and waist adjusters all support a more comfortable contoured fit. Additional supporting features include MAX zippers, a 360° connection zipper for connecting to any RST garment and multi-pocketed intake and exhaust ventilation areas which can be opened as required to channel airflow in, around and out of the jean.

ARMOUR

• CE Certification Rating: A
• Hip Armour: Pocket Only
• Knee Armour: CE Level 1

CONSTRUCTION

• Main Outer Material: MaxTex
• Stretch Material: Samtex
• Waterproof Lining: Fixed SinAqua Lining
• Thermal Lining: Removable Quilted Thermal Not Pro Full Lining
• Zips: Max Zips
• Thread: Bonded Nylon - Triple Stitched
• Ventilation: Mesh Panels
• Connection Zip: Yes - 360º

FEATURES & BENEFITS

• Reflective Detail: Yes - Reflex Print
• Adjustment: Waist Adjusters
• Outer Pockets: 4

Built with Kevlar™, this casual textile motorcycling shirt has an understated style that looks good and protects on and off the bike.

Made from a HD Wax fabric, the shirt features a DuPont™ Kevlar® Fibre lining and is supported by a contrast tartan inner lining and fixed mesh lining for extra breathability.

CE Certified to Level A, the shirt has CE Level 1 shoulder and elbow armour with a pocket for the back protector. Added features include a central front zip with a popper fastening overlay for added safety. This zip-popper ensemble also features on the cuffs and the front pockets as an extra security measure.

Added to this are the side seam air vents for maximum air flow and magnetic collar fastening to stop the collar from billowing in the wind.

This motorcycling shirt oozes urban cool and has the safety and protection to match its attitude.

ARMOUR

• CE Certification Rating: A
• Back Protector: Pocket Only
• Shoulder Armour: CE Level 1
• Elbow Armour: CE Level 1

CONSTRUCTION

• Main Outer Material: HD Wax
• Inner Lining: Fixed Mesh Lining
• Reinforcement: DuPont™ Kevlar® Fibre
• Collar: Shirt Style Magnetic Collar Fastening
• Zips: RST Zips

FEATURES & BENEFITS

• Outer Pockets: 2
• Inner Pockets: 2

FIT PROFILE

• Urban

The Pro Series Adventure-X jacket and jean is a must have for all adventure riding. Upgraded with input from legendary Dakar Rally finisher Mick Extance, (who know's what is needed to make the best motorcycling jeans for
adventure riding!)

This is a high specification jean: It’s double layered. Made from MaxTex – a lightweight high denier synthetic material that offers great protection and is comfortable to wear. Additionally, a Ballistic textile is overlaid over key impact areas along with the triple stitching using a coated bonded nylon thread offers increased abrasion resistance.

A new addition to our newest Adventure jean is the new innovative and removeable X-Liner – a singular lightweight lining which features the quilted thermal liner and the SinAqua waterproof membrane combined together. This along with the superior levels of ventilation in the form of the fixed comfort mesh lining and multiple leg vents ensure superb levels of air flow in and out of the jean, keeping you cool as you ride.

Add in the class leading armour; it has a CE certification rating of A and CE Level 2 knee armour you have a garment ready to protect in the event of any impact. And if that wasn’t enough, hardwearing MAX zips are used throughout the jean and there are stretch motion panels and adjustment points on the arm and waist to offer the most comfortable fit.

From huge ventilation points to CE armour, the RST Adventure-X jean is everything you need a textile adventure motorcycle jean to be and more!

ARMOUR

• CE Certification Rating: A
• Hip Armour: Pocket Only
• Knee Armour: CE Level 2

CONSTRUCTION

• Main Outer Material: Maxtex
• Secondary Material: Ballistic
• Stretch Material: Samtex
• Waterproof Lining: Removable Quilted Thermal Liner Bonded with Waterproof SinAqua Membrane
• Inner Lining: Removable Comfort Mesh Lining
• Zips: Max Zips
• Thread: Bonded Nylon - Triple Stitched
• Ventilation: Yes - Leg Vents
• Connection Zip: Yes - 360º

FEATURES AND BENEFITS

• Reflective Detail: Yes - Reflex Logos
• Adjustment: Velcro Waist Adjusters
• Outer Pockets: 2

The RST Reinforced Heavy Duty Aramid Cargo Motorcycle Jeans are made for riding but styled to look like normal jeans. These heavy duty, protective motorbike jeans are CE Certified Level A and made from Condura cotton and reinforced with DuPont™ Kevlar®.

ARMOUR

• CE Certification Rating: A
• Hip Protector: Pocket Only
• Knee Armour: CE Level 1

CONSTRUCTION

• Main Outer Material: Cordura Cotton
• Inner Lining: Aramid Full
• Zips: Max Zips
• Thread: Coates Bonded Nylon - Triple Stitched
• Ventilation: N/A
• Connection Zip: No

FEATURES AND BENEFITS

• Reflective Detail: No
• Outer Pockets: 4

The RST Reinforced Ladies Textile Jean are perfect for riding and are CE Certified to Level B. Inside there is a DuPont™ Kevlar® lining at the knees and seat; the same material used in bullet proof vests, with an incredible high abrasion and cut resistance whilst remaining supple and soft, perfect for use in this type of riding jean. There are pockets for hip and knee armour (sold separately).

ARMOUR

• CE Certification Rating: B
• Hip Armour: Pocket Only
• Knee Armour: Pocket Only

CONSTRUCTION

• Main Outer Material: Denim
• Inner Lining: DuPont™ Kevlar®
• Zips: Max Zips
• Thread: Coates Bonded Nylon - Triple Stitched
• Connection Zip: No

FEATURES AND BENEFITS

• Reflective Detail: No
• Outer Pockets: 2

This may be our entry level touring boot, but is still packed with features to keep your feet protected.

Made from a microfibre construction, the boot features a SinAqua waterproof membrane for dryness and breathability. Added to this are the integrated shin, ankle and heel protection. The boot also features an integrated reinforced toe box and is CE certified as standard!

ARMOUR

• CE Certification Rating: Yes
• Heel Protection: Reinforced Cockpit
• Shin Protection: Integrated
• Ankle Protection: Integrated

CONSTRUCTION

• Main Outer Material: Microfibre
• Waterproof Lining: SinAqua Waterproof Membrane
• Closure: Zip Fastening with Hook & Loop
• Shift Pad: TPU
• Shank: Polycarbonate Anti Twist Midsole
• Insole: Anti-Bacterial Gel
• Outsole: RST Touring Pro Sole

FEATURES & BENEFITS

• Toe Box: Integrated & Reinforced
• Puller: Strap Design

Made from tear resistant MaxTex, Axiom features all the the key ingredients for an essential everyday glove including a SinAqua waterproof membrane, pre-curved fingers for added comfort and a strap closure which offers a secure fit.

CE certified to 1 KP, additional protection is offered in the form of knuckle protectors and the double layer leather palm.

ARMOUR

• CE Certification Rating: Level 1 KP
• Knuckle Protection: Carbon

CONSTRUCTION

• Main Outer Material: Maxtex
• Waterproof Lining: SinAqua Waterproof Membrane
• Precurved Fingers: Yes
• Cuff Closure: Hook & Loop Strap Closure

FEATURES & BENEFITS

• Reflective Detail: Yes - Reflex Logos
• Double Layer Leather Palm: Yes

The new and improved RST Safety Jacket. This Hi-Vis Jacket is ideal to keep you safe and seen. With subtle reflective stripes and bright flo yellow colouring you'll always stand out in the crowd. This safety vest is fully lined and breathable meaning you can layer up and it won't become warm and clingy!

CONSTRUCTION

• Outer Shell 230T Polyester
• Lining 100% Polyester Mesh

FEATURES AND BENEFITS

• Reflective Detail
• Front Zip Fastening

RST Tech X Technical wear has been designed for comfort in the most demanding of conditions. Suitable for a wide variety of sports and leisure applications, the Tech X technical garments are made from CP-U fabric which has outstanding moisture wicking properties keeping your skin temperature regulated. The Tech X technical wear is the perfect under garment choice for any activity that challenges the body.

CONSTRUCTION

• Made From CP-U Fabric

FEATURES AND BENEFITS

• Keeps Skin Temperature Regulated

Wind chill has a dramatic effect on the loss of body heat from the skin, so a fabric that blocks the wind is vitally important when you’re riding a motorbike, not only to stay comfortable but also to keep alert. The RST TWB fabric offers more than just wind protection; the ergonomic design is enhanced by a four-way stretch material with stretch and compression properties. This helps keep the muscles warm, reducing muscle strain and rider fatigue. The breathability of TWB also keeps you comfortable and as warm as possible. As with all RST products, RST TWB garments have been tested by our development team in the toughest weather the UK has to offer.

CONSTRUCTION

• Made From TWB Fabric
• 4 Way Stretch, Breathable Material

FEATURES AND BENEFITS

• Retains Heat

Wind chill has a dramatic effect on the loss of body heat from the skin, so a fabric that blocks the wind is vitally important when you’re riding a motorbike, not only to stay comfortable but also to keep alert. The RST TWB fabric offers more than just wind protection; the ergonomic design is enhanced by a four-way stretch material with stretch and compression properties. This helps keep the muscles warm, reducing muscle strain and rider fatigue. The breathability of TWB also keeps you comfortable and as warm as possible. As with all RST products, RST TWB garments have been tested by our development team in the toughest weather the UK has to offer.

CONSTRUCTION

• Made From TWB Fabric
• 4 Way Stretch, Breathable Material

FEATURES AND BENEFITS

• Retains Heat

Designed for comfort and safety, the TracTech Evo III has been developed with countless hours on the road and track! With the proven fit of its predecessor and huge upgrade in spec, the TracTech Evo III massively over delivers in all areas. The new hard wearing sole is bonded to the 360 heel cockpit, this in-turn is attached to the rear ankle support structure preventing over flexion and extension of the ankle. The redesigned shin plate offers increased protection from impacts, as does the enlarged toe-box. The attention to detail even stretches to different sized shift pads dependant on the boot size. For a boot that offers supreme protection and day long comfort look no further than the TracTech Evo III. 

ARMOUR

• CE Certification Rating: Level 2/2/1
• Heel Protection: Moulded TPU Heel Cockpit
• Shin Protection: Moulded TPU Shin Armour
• Ankle Protection: TPU

CONSTRUCTION

• Main Outer Material: Microtech Construction
• Ventilation: Perforated Leather
• Closure: Zip & Velcro
• Shift Pads: Yes
• Shank: Polycarbonate Anti Twist
• Insole: Antibacterial Gel
• Outsole: Dual Density Non Slip Racing Sole
• Ankle: Hinged Ankle Support

FEATURES AND BENEFITS

• Toe Box: Reinforced

Designed for comfort and safety, the TracTech Evo III has been developed with countless hours on the road and track! With the proven fit of its predecessor and huge upgrade in spec, the TracTech Evo III massively over delivers in all areas. The new hard wearing sole is bonded to the 360 heel cockpit, this in-turn is attached to the rear ankle support structure preventing over flexion and extension of the ankle. The redesigned shin plate offers increased protection from impacts, as does the enlarged toe-box. The attention to detail even stretches to different sized shift pads dependant on the boot size. For a boot that offers supreme protection and day long comfort look no further than the TracTech Evo III. 

ARMOUR

• CE Certification Rating: Level 2/2/1
• Heel Protection: Moulded TPU Heel Cockpit
• Shin Protection: Moulded TPU Shin Armour
• Ankle Protection: TPU

CONSTRUCTION

• Main Outer Material: Microtech Construction
• Ventilation: Perforated Leather
• Closure: Zip & Velcro
• Shift Pads: Yes
• Shank: Polycarbonate Anti Twist
• Insole: Antibacterial Gel
• Outsole: Dual Density Non Slip Racing Sole
• Ankle: Hinged Ankle Support

FEATURES AND BENEFITS

• Toe Box: Reinforced

Designed for comfort and safety, the TracTech Evo III has been developed with countless hours on the road and track! With the proven fit of its predecessor and huge upgrade in spec, the TracTech Evo III massively over delivers in all areas. The new hard wearing sole is bonded to the 360 heel cockpit, this in-turn is attached to the rear ankle support structure preventing over flexion and extension of the ankle. The redesigned shin plate offers increased protection from impacts, as does the enlarged toe-box. The attention to detail even stretches to different sized shift pads dependant on the boot size. For a boot that offers supreme protection and day long comfort look no further than the TracTech Evo III. 

ARMOUR

• CE Certification Rating: Level 2/2/1
• Heel Protection: Moulded TPU Heel Cockpit
• Shin Protection: Moulded TPU Shin Armour
• Ankle Protection: TPU

CONSTRUCTION

• Main Outer Material: Microtech Construction
• Ventilation: Perforated Leather
• Closure: Zip & Velcro
• Shift Pads: Yes
• Shank: Polycarbonate Anti Twist
• Insole: Antibacterial Gel
• Outsole: Dual Density Non Slip Racing Sole
• Ankle: Hinged Ankle Support

FEATURES AND BENEFITS

• Toe Box: Reinforced

Designed for comfort and safety, the TracTech Evo III has been developed with countless hours on the road and track! With the proven fit of its predecessor and huge upgrade in spec, the TracTech Evo III massively over delivers in all areas. The new hard wearing sole is bonded to the 360 heel cockpit, this in-turn is attached to the rear ankle support structure preventing over flexion and extension of the ankle. The redesigned shin plate offers increased protection from impacts, as does the enlarged toe-box. The attention to detail even stretches to different sized shift pads dependant on the boot size. For a boot that offers supreme protection and day long comfort look no further than the TracTech Evo III. 

ARMOUR

• CE Certification Rating: Level 2/2/1
• Heel Protection: Moulded TPU Heel Cockpit
• Shin Protection: Moulded TPU Shin Armour
• Ankle Protection: TPU

CONSTRUCTION

• Main Outer Material: Microtech Construction
• Ventilation: Perforated Leather
• Closure: Zip & Velcro
• Shift Pads: Yes
• Shank: Polycarbonate Anti Twist
• Insole: Antibacterial Gel
• Outsole: Dual Density Non Slip Racing Sole
• Ankle: Hinged Ankle Support

FEATURES AND BENEFITS

• Toe Box: Reinforced

Designed for comfort and safety even in the wettest conditions, the TracTech Evo III WP has been developed with countless hours on the road and track! With the proven fit of its predecessor and huge upgrade in spec, the TracTech Evo III WP massively over delivers in all areas. The new hard wearing sole is bonded to the 360 heel cockpit, this in-turn is attached to the rear ankle support structure preventing over flexion and extension of the ankle. The redesigned shin plate offers increased protection from impacts, as does the enlarged toe-box. The attention to detail even stretches to different sized shift pads dependant on the boot size. To ensure you stay dry we use our proven SinAqua WP breathable membrane. For a boot that offers supreme protection and day long comfort, whatever the weather, look no further than the TracTech Evo III WP.

ARMOUR

• CE Certification Rating: Level 2/2/1
• Heel Protection: Moulded TPU Heel Cockpit
• Shin Protection: Moulded TPU Shin Armour
• Ankle Protection: TPU

CONSTRUCTION

• Main Outer Material:Microtech Construction
• Waterproof Lining: Fixed SinAqua Lining
• Closure: Zip & Velcro
• Shift Pads: Yes
• Shank: Polycarbonate Anti Twist
• Insole: Antibacterial Gel
• Outsole: Dual Density Non Slip Racing Sole
• Ankle: Hinged Ankle Support

FEATURES AND BENEFITS

• Toe Box: Reinforced

Featuring a CE Level 1 knuckle protector, Turbine offers a great level of protection for its price point. Made with leather, the glove has a soft polyester lining and comes with silicone palm grips, padded protection panels, finger motion panels and perforated leather for added movement and breathability.

Added to this are the elasticated cuff, hook & loop wrist adjusters and strap closure which all combine to ensure a secure fit.

ARMOUR

• CE Certification Rating: Level 1 KP
• Knuckle Protection: Memory Foam

CONSTRUCTION

• Main Outer Material: Full Grain Leather
• Cuff Closure: Hook & Loop Strap Closure
• Ventilation: Perforated Leather

FEATURES & BENEFITS

• Finger Motion Panels Yes
• Silicone Palm Grips: Yes
• Double Layer Leather Palm: Yes

Looking for a ladies casual / urban look when riding a motorbike? Choose these short cut sneaker style motorcycle boots for women from RST.

ARMOUR

• CE Certification Rating: Level 1/1/2
• Ankle Protection: Intergrated

CONSTRUCTION

• Main Outer Material:Full Grain Cowhide
• Closure: Laces
• Shank: Polycarbonate Anti Twist
• Insole: Antibacterial Gel
• Outsole: Anti Slip Sole

FEATURES AND BENEFITS

• Toe Box: Reinforced

Built with Kevlar™- There's been a lot of work in the tailoring of these jeggings to ensure they have the perfect ladies fit. It has a narrow taped fit profile.

Made with a stretch Denim with a DuPont™ Kevlar® Fibre lining in key impact areas such as the side of the leg, seat area and knee.

CE rated to Level A, additional protection is also offered by the CE Level 1 knee armour and a pocket for the hip armour.

Supporting this on the reverse of the jegging is the new RST Infinite Adjustment Armour System for the knee armour. Essentially, the knee armour cotton pocket has been extended across the length of the jegging legs. Additionally, the knee armour is now housed in a cotton bag and once inserted into the pocket, can be adjusted using the hook and loop system on both the armour bag and the armour pocket. This gives endless possibilities to positioning the armour to suit and aids comfort levels. A ruler is printed on both armour pockets to support positioning accuracy on both legs.

ARMOUR

• CE Certification Rating: A
• Hip Armour: Pocket only
• Knee Armour: Pocket only

CONSTRUCTION

• Main Outer Material: Denim
• Inner Lining: DuPont™ Kevlar® Fibre
• Zips: MAX zips
• Thread: Bonded Nylon - Triple Stitched

FEATURES & BENEFITS

• Outer Pockets: 4

FIT PROFILE

• Urban

Built with Kevlar™ - This is a 5 pocket western style jean and features a coin pocket, front fly opening, contrast stitch detailing and a whiskers design detail to the front leg across the forks.

Made from stretch denim with a DuPont™ Kevlar® Fibre lining in key impact areas such as the side of the leg, seat area and knee.

CE rated to Level A, additional protection is also offered by the CE Level 1 knee armour and a pocket for the hip armour.

Supporting this on the reverse of the jean is the new RST Infinite Adjustment Armour System for the knee armour. Essentially, the knee armour cotton pocket has been extended across the length of the jean legs. Additionally, the knee armour is now housed in a cotton bag and once inserted into the pocket, can be adjusted using the hook and loop system on both the armour bag and the armour pocket. This gives endless possibilities to positioning the armour to suit and aids comfort levels. A ruler is printed on both armour pockets to support positioning accuracy on both legs.

ARMOUR

• CE Certification Rating: A
• Knee Armour: CE Level 1

CONSTRUCTION

• Main Outer Material: Stretch Cotton Twill or Denim
• Inner Lining: Cotton / Fixed Mesh Lining
• Reinforcement: DuPont™ Kevlar® Fibre
• Zips: RST Zippers

FEATURES & BENEFITS

• Infinite Adjust Armour System: Yes
• RST Branded Back Waist Label Patch: Yes
• Belt Loops: Yes
• Contrast Stitch Detail: Yes

FIT PROFILE

• Urban

Built with Kevlar™ - This is a 5 pocket western style jean and features a coin pocket, front fly opening, contrast stitch detailing and a whiskers design detail to the front leg across the forks.

Made from stretch denim with a DuPont™ Kevlar® Fibre lining in key impact areas such as the side of the leg, seat area and knee.

CE rated to Level A, additional protection is also offered by the CE Level 1 knee armour and a pocket for the hip armour.

Supporting this on the reverse of the jean is the new RST Infinite Adjustment Armour System for the knee armour. Essentially, the knee armour cotton pocket has been extended across the length of the jean legs. Additionally, the knee armour is now housed in a cotton bag and once inserted into the pocket, can be adjusted using the hook and loop system on both the armour bag and the armour pocket. This gives endless possibilities to positioning the armour to suit and aids comfort levels. A ruler is printed on both armour pockets to support positioning accuracy on both legs.

ARMOUR

• CE Certification Rating: A
• Knee Armour: CE Level 1

CONSTRUCTION

• Main Outer Material: Stretch Cotton Twill or Denim
• Inner Lining: Cotton / Fixed Mesh Lining
• Reinforcement: DuPont™ Kevlar® Fibre
• Zips: RST Zippers

FEATURES & BENEFITS

• Infinite Adjust Armour System: Yes
• RST Branded Back Waist Label Patch: Yes
• Belt Loops: Yes
• Contrast Stitch Detail: Yes

FIT PROFILE

• Urban

Built with Kevlar™- This jean takes inspiration from the fashion industry and uses innovative techniques to offer a stylish garment which has superior protection to match.

This is a 5 pocket western style jean and has traditional features such as a coin pocket, front fly opening, contrast stitch detailing and a whiskers design detail to the front leg across the forks. Additionally, the tapered leg offers a contoured fit.

What sets this jean apart is it’s construction; denim and DuPont™ Kevlar® are pre woven together to create a single layer denim with high protective capabilities that remains lightweight and soft, just like a regular jean.

CE rated to Level AA, additional protection is also offered by the CE Level 1 knee and hip armour.

On the inside of the jean sits the new RST Infinite Adjustment Armour System. Developed to improve fit of the knee armour for different leg shapes and sizes, the CE Level 1 armour sits in a cotton pouch which can be securely fixed into the full length knee armour pocket with hook & loop fasteners. This means the knee armour sits exactly where it is needed – on the knee, aiding comfort levels and most importantly, improving the protective capabilities of the armour. A ruler is printed in the inside of the jean to ensure a quick and accurate fitting process.

This is a next generation textile jean, designed to offer comfort and protection.

ARMOUR

• CE Certification Rating: AA
• Knee Armour: CE Level 1
• Hip Armour: CE Level 1

CONSTRUCTION

• Main Outer Material: Single Layer Denim & DuPont™ Kevlar® Fibre
• Inner Lining: Cotton Front Leg Lining
• Zips: RST Zippers

FEATURES & BENEFITS

• Outer Pockets: 5
• Infinite Adjust Armour System: Yes
• RST Branded Back Waist Label Patch: Yes
• Belt Loops: Yes
• Contrast Stitch Detail: Yes

FIT PROFILE

• Urban

The RST Hi-Vis Waterproof One Piece Suit is perfect to carry in your backpack on days when the weather is unsettled. Designed to fit over your leathers (without race humps) these waterproofs are quick and easy to get on when the rain comes!

CONSTRUCTION

• Outer Shell 100% Polyester with PVC Backing
• Fixed Mesh Lining

FEATURES AND BENEFITS

• Elasticated Cuffs
• Reflective Detail
• Front Zip Fastenings
• Outer Pockets
• Elasticated Waist

Motorcycle back protector inserts for men and women from RST - that offer great protection but also maximum comfort when you are riding your motorbike!

• Low profile construction
• Level 1 protection
• Flexible memory foam design
• Curves to your back shape

RST AIR-TECH CE Level 2 chest protectors are CE certificated to EN 1621-3 : 2018, offering CE Level 2 protection with Type A coverage.

Constructed using flexible materials, it also focuses on enhnaced comfort and tends to keep you cool during long hauls, thanks to (AVS) Air Ventilation System that incorporates holes across the armour for enhanced ventilation.

RST Visco Motorcycle Body Armour is an upgrade to the standard RST Contour Plus Motorcycle Armour included in most RST jackets and 1 piece leather suits, being softer and more supple for improved comfort with the same level of protection.

• CE Approved
• Soft & Supple for improved comfort

RST Visco Shoulder Protectors are an upgrade to the standard RST Contour Plus Motorcycle Armour included in most RST jackets and 1 piece leather suits, being softer and more supple for improved comfort with the same level of protection.

• CE Approved
• Soft & Supple for improved comfort

Combining the lightweight construction and the superior energy absorbing material which consists of a mixture of a thermally formed Bio foam and a 3D spacer plastic, the RST Level 2 shoulder pads offer a fantastic amount of flexibility and comfort without compromising protection.

• HPS is the most advanced protection system with a superior energy absorbing function and flexibility.
• HPS is patented impact protection technology developed by Powertector
• HPS consists of an ‘intelligent’ three-dimensional spacer plastic and thermally formed Bio PE Foam
• HPS is a flexible and lightweight construction for outstanding comfort and freedom of movement.

RST Connection Belt to match your favourite RST jeans to your RST jacket!

Want to ride with your RST Aramid jeans and your RST jacket? Sorted. The RST connection belt with a full length connection zip allows you to connect your RST jacket with your RST Aramid jeans. Thread the belt onto your jeans through the loops on the connection belt and away you go!

RST Connection Belt to match your favourite RST jeans to your RST jacket!

Want to ride with your RST Aramid jeans and your RST jacket? Sorted. The RST connection belt with a full length connection zip allows you to connect your RST jacket with your RST Aramid jeans. Thread the belt onto your jeans through the loops on the connection belt and away you go!

RST Race Dept knee sliders are proven in the toughest of race environments. Our Knee sliders provide a great mix of durability and essential rider feedback.

RST Race Dept knee sliders are proven in the toughest of race environments. Our Knee sliders provide a great mix of durability and essential rider feedback.

RST Race Dept knee sliders are proven in the toughest of race environments. Our Knee sliders provide a great mix of durability and essential rider feedback.

RST Race Dept knee sliders are proven in the toughest of race environments. Our Knee sliders provide a great mix of durability and essential rider feedback.

Replacement toe sliders for the TracTech Evo motorcycle boot. An essential spare for your track day kit bag.

Supplied with the 2 fitting bolts to connect the slider to the boot.

The RST Reinforced Lumberjack style shirt is CE Certified to Level A. The shirt come with a pocket for a back protector to be added, two outer front pockets, a button down closure which cleverly conceals a zip closure on the inside for added security so that you know that in the event of a crash your shirt won't be popping open. The armour in the shoulders and elbows are both CE Level 1. The jacket is made of HTC with a DuPont™ Kevlar® lining.
 

ARMOUR

• CE Certification Rating: A
• Back Protector: Pocket Only
• Shoulder Armour: CE Level 1
• Elbow Armour: CE Level 1

CONSTRUCTION

• Main Outer Material: Cotton
• Inner Lining: DuPont™ Kevlar®
• Zips: YKK Antique Brass
• Thread: Coates Bonded Nylon - Triple Stitched
• Connection Zip: No

FEATURES AND BENEFITS

• Inner Pockets: 1
• Outer Pockets: 2

RST Aramid jeans are made for riding, and styled to look like normal jeans. Inside you’ve got woven Aramid fibres across the knees and seat; Aramid is the same material used in bullet proof vests and has an incredible high abrasion and cut resistance whilst remaining supple and soft, perfect for use in this type of riding jean. Alongside the Aramid we fit, as standard, Contour Plus CE knee armour in an adjustable pocket to get the armour in the correct place, whatever your leg shape. You will also find removable pockets allowing the Aramid jeans to be further upgraded with option CE Contour Plus hip armour.

Features of the RST Ladies Aramid Straight Leg jean include:

• Cotton / Elastane 11.5oz Denim
• Aramid lining
• Mesh lining
• RST Contour plus CE knees
• Pocket for optional RST contour plus CE hip protectors
• Adjustable height CE knee protector pockets
• Outer pockets

Built with Kevlar™- TracTech Evo 4 glove combines the best of previous TracTech gloves with more features for a superb fit, comfort and protection.

Made with both full-grain cowhide and kangaroo leather, the glove features a CE Level 2 Carbon Knuckle Protector for impact protection. DuPont™ Kevlar® Fibre on the palm stitching and underlay, along with double layer kangaroo leather and an RST palm slider protect the palm in the event of a high speed slide, while the double wrist and cuff closure offer a secure fit. DuPont™ Kevlar® lining throughout the rest of the glove prevents tearing, and elasticated conjoined fingers to prevent “finger roll” without affecting reach or flexibility when changing gear.

The glove has a perforated outer to maximise airflow, digital leather panels on the palm and forefingers to enhance grip, a memory foam panel to the back of the hand to aid comfort and support, with pre-curved fingers to suit the contour of the hand on the handlebars. The TracTech Evo 4 Glove offers no compromises – high performance race glove for fast riders.

ARMOUR

• CE Certification Rating: 2 KP
• Knuckle Protection: Carbon
• Finger Protection: Conjoined Little Finger
• Thumb Protection: Yes
• Palm Slider: Yes

CONSTRUCTION

• Main Outer Material: Full Grain Leather
• Secondary Outer Material: Kangaroo Leather
• Reinforcement: DuPont™ Kevlar® Fibre
• Outstitched Fingers: Yes
• Pre-curved Fingers: Yes
• Cuff Closure: Hook & Loop Double Wrist Closure
• Ventilation: Perforated Leather

FEATURES & BENEFITS

• Double Layer Leather Palm: Yes
• Palm Slider: Yes
• Finger Motion Panels: Yes

Built with Kevlar™- TracTech Evo 4 glove combines the best of previous TracTech gloves with more features for a superb fit, comfort and protection.

Made with both full-grain cowhide and kangaroo leather, the glove features a CE Level 2 Carbon Knuckle Protector for impact protection. DuPont™ Kevlar® Fibre on the palm stitching and underlay, along with double layer kangaroo leather and an RST palm slider protect the palm in the event of a high speed slide, while the double wrist and cuff closure offer a secure fit. DuPont™ Kevlar® lining throughout the rest of the glove prevents tearing, and elasticated conjoined fingers to prevent “finger roll” without affecting reach or flexibility when changing gear.

The glove has a perforated outer to maximise airflow, digital leather panels on the palm and forefingers to enhance grip, a memory foam panel to the back of the hand to aid comfort and support, with pre-curved fingers to suit the contour of the hand on the handlebars. The TracTech Evo 4 Glove offers no compromises – high performance race glove for fast riders.

ARMOUR

• CE Certification Rating: 2 KP
• Knuckle Protection: Carbon
• Finger Protection: Conjoined Little Finger
• Thumb Protection: Yes
• Palm Slider: Yes

CONSTRUCTION

• Main Outer Material: Full Grain Leather
• Secondary Outer Material: Kangaroo Leather
• Reinforcement: DuPont™ Kevlar® Fibre
• Outstitched Fingers: Yes
• Pre-curved Fingers: Yes
• Cuff Closure: Hook & Loop Double Wrist Closure
• Ventilation: Perforated Leather

FEATURES & BENEFITS

• Double Layer Leather Palm: Yes
• Palm Slider: Yes
• Finger Motion Panels: Yes

Built with Kevlar™- the TracTech Evo 4 short glove combines all the key features of the longer glove into a shorter version to offer superb fit, comfort and protection - CE Certified to 1 KP.

Made with both full-grain cowhide and kangaroo leather, the glove features a CE Level 1 Carbon Knuckle Protector for impact protection. DuPont™ Kevlar® Fibre on the palm stitching and underlay, along with double layer kangaroo leather and an RST palm slider protect the palm in the event of a high speed slide. Elasticated conjoined fingers to prevent “finger roll” without affecting reach or flexibility when changing gear and the hook & loop closure offers a secure fit.

The glove has a perforated outer to maximise airflow, digital leather panels on the palm and forefingers to enhance grip, a memory foam panel to the back of the hand to aid comfort and support, with pre-curved fingers to suit the contour of the hand on the handlebars. The TracTech Evo 4 short glove is the a no compromise short glove for the track or the road.

ARMOUR

• CE Certification Rating: Level 1 KP
• Knuckle Protection: Carbon
• Finger Protection: Conjoined Little Finger
• Thumb Protection: Memory Foam
• Palm Slider: Yes

CONSTRUCTION

• Main Outer Material: Full Grain Leather
• Secondary Outer Material: Kangaroo Leather
• Reinforcement: DuPont™ Kevlar® Fibre
• Outstitched Fingers: Yes
• Pre-curved Fingers: Yes
• Cuff Closure: Hook & Loop Double Wrist Closure
• Ventilation: Perforated Leather

FEATURES & BENEFITS

• Double Layer Leather Palm: Yes
• Palm Slider: Yes
• Finger Motion Panels Yes

The Urban Air 3 Mesh glove is CE Certified to Level 1 KP. Made from mesh with a polyester lining, this glove offers supreme ventilation.

Protection comes in the form of TPU on the knuckle, TPR on the fingers and memory foam thumb and full grain double layer leather palm.
This is further supported by the smart touch leather on the index finger, pre-curved fingers and a hook and loop strap closure - perfect for summer riding.

ARMOUR

• CE Certification Rating: Level 1 KP
• Knuckle Protector: TPU
• Finger Protector: TPR
• Thumb Protector: Memory Foam

CONSTRUCTION

• Main Outer Material: Mesh
• Precurved Fingers: Yes
• Cuff Closure: Adjustable Velcro
• Palm: Full Grain Leather

FEATURES AND BENEFITS

• Finger Motion Panels: Yes
• Puller: Strap Design
• Smart Touch Leather: Yes - Index Finger
• Double Layer Leather Palm: Yes

The Urban Air 3 Mesh glove is CE Certified to Level 1 KP. Made from mesh with a polyester lining, this glove offers supreme ventilation.

Protection comes in the form of TPU on the knuckle, TPR on the fingers and memory foam thumb and full grain double layer leather palm.
This is further supported by the smart touch leather on the index finger, pre-curved fingers and a hook and loop strap closure - perfect for summer riding.

ARMOUR

• CE Certification Rating: Level 1 KP
• Knuckle Protector: TPU
• Finger Protector: TPR
• Thumb Protector: Memory Foam

CONSTRUCTION

• Main Outer Material: Mesh
• Precurved Fingers: Yes
• Cuff Closure: Adjustable Velcro
• Palm: Full Grain Leather

FEATURES AND BENEFITS

• Finger Motion Panels: Yes
• Puller: Strap Design
• Smart Touch Leather: Yes - Index Finger
• Double Layer Leather Palm: Yes

Cut slightly less aggressively than the V4.1, the Pro Series 1-pc suit is fully CE certified to level AAA and is an ideal choice for track days.

Made from super supple premium cowhide leather, the suit is reinforced with seam free, four-way woven stretch with motion panels which stretches from the side of the body to the arms and across the chest, knees, elbows, rear back, inner calf and thigh. This enhances the body length and offers superior levels of comfort and movement on and off the bike. Additionally, the double layer leather on the seat also features a stitched in coccyx protector and the inner section of the knee features Dupont™ Kevlar® to aid grip on the fuel tank under heavy braking.

Additionally, the fixed 3D Quick Dry mesh lining absorbs sweat easily, is fast drying and along with the panel in panel ventilation on the chest, body, inner thighs and back, keeps you fresh.

The race hump has been designed to accommodate helmet spoilers and aids aerodynamic performance in a racing tuck.

Add in-class leading safety features such as the suite of CE certified armour, TPU shoulder and knee cups, quick release hook & loop elbow and knee sliders and you have a high pedigree riding suit that punches way above its weight.

ARMOUR

• CE Certification Rating: AAA
• Back Protector: CE Back Protector Level 1
• Shoulder Armour: CE Level 2
• Elbow Armour: CE Level 2
• Hip Armour: CE Level 2
• Knee Armour: CE Level 1
• Shoulder Cup: TPU
• Knee Cup: TPU

CONSTRUCTION

• Main Outer Material: Premium Drum Dyed Cowhide Leather
• Stretch Material: 4 Way Woven Stretch Panels with Full Body Motion Panels
• Inner Lining: Fixed Quick Dry 3D Mesh Lining
• Collar: Neoprene Race
• Cuff: Neoprene Race
• Zips: MAX Zips
• Thread: Bonded Nylon
• Ventilation: Panel in Panel Perforated Leather
• Reinforcement: Double Leather in Impact Areas

FEATURES & BENEFITS

• Hump: Aerodynamic Race Hump
• Knee Slider: Quick Release Hook & Loop Knee Sliders
• Elbow Slider: Removable Hook & Loop Elbow Sliders
• Rubberised Aramid Knee Gripper: Yes