All Helmets

The most affordable helmet on the market, with the highest safety homologation. The MT Thunder 4 SV represents all the drive and technological evolution of MT Helmets.

The arrival of the new ECE 22.06 certification has made MT Helmets a specialist in safety homologations and sends a very clear message to the industry: now safety on a bike is within everyone’s reach.

Features:

• HIRP Shell (High Impact Resistant Polymer) for excellent impact response. 2 Shell Sizes
• Three-Point Protector System – The base of this helmet has a three-point support system that has been developed to provide good stability when the Thunder 4 SV is placed on flat surfaces. This makes it easier to handle the helmet for cleaning or maintenance, but also allows the elements inside the helmet to be insulated from the surface, protecting them from chafing and, above all, enhancing hygiene when using the helmet
• Airflow Channel System – Through fluid dynamics analysis, air channels have been designed to minimize air resistance and boost internal ventilation flow, reducing temperature and moisture inside the helmet
• Reduced Aero Drag Design – An aerodynamic design studied by the MT Helmets engineering team to reduce aerodynamic resistance as much as possible
• Racing Spoiler
   
• ECE R-22.06 (EU) Approved. This helmet exceeds the highest safety standards and has passed, since its launch, the new ECE 22.06 test required for the European market
• Micrometric Double Toothed Closure – Redesigned micrometric retention system to keep the helmet always fastened and secured. The MT Helmets engineering department has developed this system to ensure that the fastener is locked by at least two points, ensuring that the system is secured. This locking system, optimal for sport-touring models, offers the best balance between wearing comfort and safety
• 1650 (+/-50) grams, its weight is well distributed
   
• Quick Visor Swap System – A system designed in-house by the MT Helmets Engineering team. The first helmet to feature this technology. This system, which has been patented by MT Helmets, allows the rider to attach/detach the visor really quickly and comfortably without having to take the helmet off
• Extended Vision Area – The extended vision area allows riders to have better visibility of their surroundings, increasing ride comfort and improving the riding experience and safety on the bike
• Extended Sun Visor Protection – Retractable sun visor system offering extended protection, preventing distortion due to changes in light conditions. It comes with a mechanism that can be quickly and comfortably used with one hand. It is also detachable for easy cleaning and maintenance.
• Pinlock 100% Max Vision – The Thunder 4 SV features space for a Pinlock 100% Max Vision insert
   
• The interior pads have been developed specifically for each helmet size to fit all head sizes in an optimal way
• The materials used for the manufacture of these elements combine different fabrics that favor ventilation, exhaust moisture, and drying quickly
• Removable and washable liners that allow you to keep your helmet clean and fresh
• Emergency Release System – Quick release system for side pads for removing the helmet in case of an accident. This system prevents possible damage during a helmet removal maneuver
• Universal Intercom Cage – This helmet has been developed taking into account the needs arising from the incorporation of an intercom system and has specific spaces to fit an intercom communication system

AGV ETERES - Comfort and protection, to explore the city. The AGV open-face helmet for taking on every urban trip in freedom and safety.

Eteres is the new AGV open-face helmet with ECE2206 homologation, made of thermoplastic material, and designed to offer protection and comfort in the saddle, in every urban adventure. The helmet was designed for wear in both standard configuration and without the visor, namely just the practical sun visor. Featuring a clean and distinctive design, with an elongated visor to ensure greater face protection. For optimum comfort all year round, ventilation can be adjusted by adapting the upper air intake. Eteres’s interiors are developed and designed to offer as customizable a fit as possible: In fact, cheek pads with different thicknesses are available, perfectly interchangeable between all helmet sizes, for a total of 18 possible configurations. Moreover, the cheek pads are thinner in the temple area, allowing riders to wear the helmet comfortably even with eyeglasses or sunglasses on. All interiors, as well as the chin strap, are completely detachable and washable. Multidensity EPS guarantees maximum protection on all areas of the head, even the most delicate ones. Eteres is a helmet that guarantees maximum practicality: During daily commute, its micrometric closure, anti-theft ring – also useful for storing the helmet in maximum safety – and compatibility with the most modern communication systems are essential features for riding in complete freedom.

SAFETY ON EVERY ROUTE

Due to the AGV Extreme Safety design protocol, Eteres meets all the rigorous specifications required by the NEW - ECE22.06 standard, guaranteeing a superior level of safety. The visor is designed to protect the face by extending beyond the chin line, ensuring complete coverage. With two outer shell sizes and multi-density EPS developed in three sizes, the helmet offers maximum protection in every area. The micrometric steel retention system is extremely safe, practical and fast, ensuring reliable and comfortable fastening. It means safety that accompanies your every motorcycle ride.

SEE CLEARLY, SEE BETTER

The visor with scratch-resistant treatment offers complete protection from UV rays and guarantees a wide field of vision, ensuring optimal vision in any type of environment. The sun visor can be activated easily using a side lever strategically positioned on the cover for the visor mechanism. The cable system makes the movement extremely fluid. Removing the visor is simple and doesn’t require any tools, allowing Eteres to be used even with only the sun visor active. It means being able to see more, sooner and better, in every light situation.

ONLY COMFORT INSIDE

The central upper air vent ensures optimal air exchange inside the helmet, allowing precise air flow regulation. Comfortable inside, the helmet offers an ultra-comfortable fit through the option of personalizing the cheek pads with different thicknesses, in order to meet the specific needs of every motorcycle rider. The inside of Eteres is made using soft, high-quality fabrics, designed to ensure a comfortable fit even for eyewear users. Both crown and cheek pads are easily removable and washable for maximum freshness at all times. It means interior quality, comfort for longer.

The Synchrony Duosport is based on the Synchrony MX shell. The Duosport is suitable for all road and off-road activities including Enduro, Trail and Quad riding. The peak can be removed turning the Synchrony Duosport into a perfectly respectable road helmet, representing tremendous value for money.

Features:

• Internal drop down sun visor
• Removable and adjustable peak
• Removable and washable Liner
• Quick Release Micrometric Buckle
• Aerodynamic shape
• Integrated ventilation system
• ECE 22.05 certified
• MT-V-10 visor

Revolutionary safety accessible to all types of riders.
ECE 22.06. Security at the highest level.

The Viale SV is updated to raise its safety levels to the highest levels, exceeding the new European regulation ECE 22.06.
MT-MDTC | Micrometric double tooth closure

Micrometric closure with double tooth retention system to ensure maximum safety.
Durable visor

Made of high quality optical polycarbonate to offer the best possible clarity and high impact resistance.
Retractable sun visor

Sun visor with guide tab.
Removable and washable interior:

All the interiors of the Viale SV are made with hypoallergenic fabrics and are removable and washable.
HIRP shell

Shell made of HIRP -High Impact Resistance Polymer-, a material that brings together the best qualities in the safety-weight ratio.

MT-V-26 visor

2 shell sizes: XS-M, L-2XL.

Features:

• Aerodynamic Shape
• Air Intakes
• Fire Retardant Fabric Lining
• Multiple Internal Fabrics
• Anti Scratch Visor in Optical Polycarbonate
• Quick Release Visor
• Metallic Quick Release Micrometric Buckle
• Weight 900g
• MT-V-15 visor

The MT LeMans 2 SV S is a helmet brimming with personality. In addition to its outstanding safety features, its distinctive design exudes a high degree of style that nobody can ignore.

Thanks to its ECE 22.06 certification, you won't just feel protected wearing it; it will also grant you complete authority to rule the streets.

The MT LeMans 2 SV S is an exceptionally lightweight model with high-quality finishes that reinforce its strong personality.

Features:

• Composition: HIRP (High Impact Resistance Polymer) inner shell ensures best safety to weight ratio
• Number of shells: 2 (XS to M and L to XXL)
• Available sizes: XS to XL
• Weight: 1,100 grams +/-50 gram
• Multiple density EPS liner
• Interior: all the interiors of the LeMans 2 SV S are of premium quality, made from hypoallergenic fabrics, and are removable and washable
• Closure: micrometric closure with double tooth retention system to guarantee maximum security
• Sun visor: integrated sun visor with pull-down tab
• Retro-style detailing: imitation leather inserts and finishes that emphasize its vintage style
• ECE 22.06: the MT LeMans 2 SV S has achieved the highest safety certification

The MT LeMans 2 SV S is a helmet brimming with personality. In addition to its outstanding safety features, its distinctive design exudes a high degree of style that nobody can ignore.

Thanks to its ECE 22.06 certification, you won't just feel protected wearing it; it will also grant you complete authority to rule the streets.

The MT LeMans 2 SV S is an exceptionally lightweight model with high-quality finishes that reinforce its strong personality.

Features:

• Composition: HIRP (High Impact Resistance Polymer) inner shell ensures best safety to weight ratio
• Number of shells: 2 (XS to M and L to XXL)
• Available sizes: XS to XL
• Weight: 1,100 grams +/-50 gram
• Multiple density EPS liner
• Interior: all the interiors of the LeMans 2 SV S are of premium quality, made from hypoallergenic fabrics, and are removable and washable
• Closure: micrometric closure with double tooth retention system to guarantee maximum security
• Sun visor: integrated sun visor with pull-down tab
• Retro-style detailing: imitation leather inserts and finishes that emphasize its vintage style
• ECE 22.06: the MT LeMans 2 SV S has achieved the highest safety certification

Revolutionary safety accessible to all types of riders.
ECE 22.06. Security at the highest level.

The Viale SV is updated to raise its safety levels to the highest levels, exceeding the new European regulation ECE 22.06.
MT-MDTC | Micrometric double tooth closure

Micrometric closure with double tooth retention system to ensure maximum safety.
Durable visor

Made of high quality optical polycarbonate to offer the best possible clarity and high impact resistance.
Retractable sun visor

Sun visor with guide tab.
Removable and washable interior:

All the interiors of the Viale SV are made with hypoallergenic fabrics and are removable and washable.
HIRP shell

Shell made of HIRP -High Impact Resistance Polymer-, a material that brings together the best qualities in the safety-weight ratio.

MT-V-26 visor

2 shell sizes: XS-M, L-2XL.

Features:

• Aerodynamic Shape
• Air Intakes
• Fire Retardant Fabric Lining
• Multiple Internal Fabrics
• Anti Scratch Visor in Optical Polycarbonate
• Quick Release Visor
• Metallic Quick Release Micrometric Buckle
• Weight 900g
• MT-V-15 visor

The most affordable helmet on the market, with the highest safety homologation. The MT Thunder 4 SV represents all the drive and technological evolution of MT Helmets.

The arrival of the new ECE 22.06 certification has made MT Helmets a specialist in safety homologations and sends a very clear message to the industry: now safety on a bike is within everyone’s reach.

Features:

• HIRP Shell (High Impact Resistant Polymer) for excellent impact response. 2 Shell Sizes
• Three-Point Protector System – The base of this helmet has a three-point support system that has been developed to provide good stability when the Thunder 4 SV is placed on flat surfaces. This makes it easier to handle the helmet for cleaning or maintenance, but also allows the elements inside the helmet to be insulated from the surface, protecting them from chafing and, above all, enhancing hygiene when using the helmet
• Airflow Channel System – Through fluid dynamics analysis, air channels have been designed to minimize air resistance and boost internal ventilation flow, reducing temperature and moisture inside the helmet
• Reduced Aero Drag Design – An aerodynamic design studied by the MT Helmets engineering team to reduce aerodynamic resistance as much as possible
• Racing Spoiler
   
• ECE R-22.06 (EU) Approved. This helmet exceeds the highest safety standards and has passed, since its launch, the new ECE 22.06 test required for the European market
• Micrometric Double Toothed Closure – Redesigned micrometric retention system to keep the helmet always fastened and secured. The MT Helmets engineering department has developed this system to ensure that the fastener is locked by at least two points, ensuring that the system is secured. This locking system, optimal for sport-touring models, offers the best balance between wearing comfort and safety
• 1650 (+/-50) grams, its weight is well distributed
   
• Quick Visor Swap System – A system designed in-house by the MT Helmets Engineering team. The first helmet to feature this technology. This system, which has been patented by MT Helmets, allows the rider to attach/detach the visor really quickly and comfortably without having to take the helmet off
• Extended Vision Area – The extended vision area allows riders to have better visibility of their surroundings, increasing ride comfort and improving the riding experience and safety on the bike
• Extended Sun Visor Protection – Retractable sun visor system offering extended protection, preventing distortion due to changes in light conditions. It comes with a mechanism that can be quickly and comfortably used with one hand. It is also detachable for easy cleaning and maintenance.
• Pinlock 100% Max Vision – The Thunder 4 SV features space for a Pinlock 100% Max Vision insert
   
• The interior pads have been developed specifically for each helmet size to fit all head sizes in an optimal way
• The materials used for the manufacture of these elements combine different fabrics that favor ventilation, exhaust moisture, and drying quickly
• Removable and washable liners that allow you to keep your helmet clean and fresh
• Emergency Release System – Quick release system for side pads for removing the helmet in case of an accident. This system prevents possible damage during a helmet removal maneuver
• Universal Intercom Cage – This helmet has been developed taking into account the needs arising from the incorporation of an intercom system and has specific spaces to fit an intercom communication system

There's nothing stingy about the Stinger 2 helmet.

This sporty, entry-level model offers high-end performance and features for an incredibly competitive price.

The MT Stinger 2 has the latest ECE22.06 safety requirements. This full face helmet has been improved in many ways, but still proves that MT excels in affordable high performance helmets. The new Stinger 2 features a larger spoiler for better aerodynamics at higher speeds, the ventilation has been improved for even more comfort, even on the most sunny days. The helmet is equipped with a MaxVision pinlock prepared visor for a large field of view, resulting in a lot of safety on the road. The MaxVision Pinlock can be ordered in the bundle.

With comfort in mind, the Stinger 2 is equipped with a nice wide collar and wind guard to reduce wind noise and improve comfort. The inner lining is fully removable and washable. The helmet is equipped with a steel micrometic chin closure that can be easily operated with gloves on. This new MT Stinger 2 is therefore extremely suitable for moped and scooter use, or for the novice motorcyclist.

Key Features
• Lightweight HIRP (High Impact Resistant Polymer) shell
• 1 outer shell size
• Hi-impact absorption inner shell
• Homologated front protection "P"
• Multiple density EPS liner
• Anti-allergenic, breathable, moisture-wicking fabric blend for comfort and durability
• Removable and washable liner
• Perfect fit thanks to different interior sizes
• Breath deflector to prevent screen fogging
• Prepared for an intercom system
• Micrometric buckle
• Visor: MT-V-28B
• High-quality optical polycarbonate visor with quick release and pivoting visor mechanism
• Pinlock MaxVision insert ready: DKS435
• Front and top air vents with open/close system
• Interior air flow channels for temperature and moisture management
• Air extraction through rear vents to maximise airflow
• Rear deflector optimises the aerodynamics of this helmet
• Weight: 1450 grams (+/- 50 grams)
• ECE 22.06

The most affordable helmet on the market, with the highest safety homologation. The MT Thunder 4 SV represents all the drive and technological evolution of MT Helmets.

The arrival of the new ECE 22.06 certification has made MT Helmets a specialist in safety homologations and sends a very clear message to the industry: now safety on a bike is within everyone’s reach.

Features:

• HIRP Shell (High Impact Resistant Polymer) for excellent impact response. 2 Shell Sizes
• Three-Point Protector System – The base of this helmet has a three-point support system that has been developed to provide good stability when the Thunder 4 SV is placed on flat surfaces. This makes it easier to handle the helmet for cleaning or maintenance, but also allows the elements inside the helmet to be insulated from the surface, protecting them from chafing and, above all, enhancing hygiene when using the helmet
• Airflow Channel System – Through fluid dynamics analysis, air channels have been designed to minimize air resistance and boost internal ventilation flow, reducing temperature and moisture inside the helmet
• Reduced Aero Drag Design – An aerodynamic design studied by the MT Helmets engineering team to reduce aerodynamic resistance as much as possible
• Racing Spoiler
   
• ECE R-22.06 (EU) Approved. This helmet exceeds the highest safety standards and has passed, since its launch, the new ECE 22.06 test required for the European market
• Micrometric Double Toothed Closure – Redesigned micrometric retention system to keep the helmet always fastened and secured. The MT Helmets engineering department has developed this system to ensure that the fastener is locked by at least two points, ensuring that the system is secured. This locking system, optimal for sport-touring models, offers the best balance between wearing comfort and safety
• 1650 (+/-50) grams, its weight is well distributed
   
• Quick Visor Swap System – A system designed in-house by the MT Helmets Engineering team. The first helmet to feature this technology. This system, which has been patented by MT Helmets, allows the rider to attach/detach the visor really quickly and comfortably without having to take the helmet off
• Extended Vision Area – The extended vision area allows riders to have better visibility of their surroundings, increasing ride comfort and improving the riding experience and safety on the bike
• Extended Sun Visor Protection – Retractable sun visor system offering extended protection, preventing distortion due to changes in light conditions. It comes with a mechanism that can be quickly and comfortably used with one hand. It is also detachable for easy cleaning and maintenance.
• Pinlock 100% Max Vision – The Thunder 4 SV features space for a Pinlock 100% Max Vision insert
   
• The interior pads have been developed specifically for each helmet size to fit all head sizes in an optimal way
• The materials used for the manufacture of these elements combine different fabrics that favor ventilation, exhaust moisture, and drying quickly
• Removable and washable liners that allow you to keep your helmet clean and fresh
• Emergency Release System – Quick release system for side pads for removing the helmet in case of an accident. This system prevents possible damage during a helmet removal maneuver
• Universal Intercom Cage – This helmet has been developed taking into account the needs arising from the incorporation of an intercom system and has specific spaces to fit an intercom communication system

The Genesis SV is MT Helmets' entry-level modular, expanding the brand's flip-up range with an accessible option in this segment.

• The Genesis SV has the strengths to make its mark in its segment.
• This modular helmet offers an unbeatable safety-to-price ratio.
• The Genesis SV meets the ECE 22.06 standard, guaranteeing the highest level of safety and protection.

Safety:

• Homologation: DOT, ECE 22.06 and P/J certification.
• EPS: Variable-density expanded polystyrene for the best impact absorption.
• Micrometric buckle: Fastening system with a minimum two-tooth anchorage to prevent accidental opening.

Visor:

• Visor model: MT-V-25B
• Opening mechanism: Optimised for correct visor assembly and fit.
• Sun visor: Quick-action retractable sun visor system.
• Impact resistance: Built with high-impact-resistant materials.
• FogOff & Pinlock compatibility: Pinlock® 100% MAX Vision® DKS002 can be fitted to the visor.
  ​

There's nothing stingy about the Stinger 2 helmet.

This sporty, entry-level model offers high-end performance and features for an incredibly competitive price.

The MT Stinger 2 has the latest ECE22.06 safety requirements. This full face helmet has been improved in many ways, but still proves that MT excels in affordable high performance helmets. The new Stinger 2 features a larger spoiler for better aerodynamics at higher speeds, the ventilation has been improved for even more comfort, even on the most sunny days. The helmet is equipped with a MaxVision pinlock prepared visor for a large field of view, resulting in a lot of safety on the road. The MaxVision Pinlock can be ordered in the bundle.

With comfort in mind, the Stinger 2 is equipped with a nice wide collar and wind guard to reduce wind noise and improve comfort. The inner lining is fully removable and washable. The helmet is equipped with a steel micrometic chin closure that can be easily operated with gloves on. This new MT Stinger 2 is therefore extremely suitable for moped and scooter use, or for the novice motorcyclist.

Key Features
• Lightweight HIRP (High Impact Resistant Polymer) shell
• 1 outer shell size
• Hi-impact absorption inner shell
• Homologated front protection "P"
• Multiple density EPS liner
• Anti-allergenic, breathable, moisture-wicking fabric blend for comfort and durability
• Removable and washable liner
• Perfect fit thanks to different interior sizes
• Breath deflector to prevent screen fogging
• Prepared for an intercom system
• Micrometric buckle
• Visor: MT-V-28B
• High-quality optical polycarbonate visor with quick release and pivoting visor mechanism
• Pinlock MaxVision insert ready: DKS435
• Front and top air vents with open/close system
• Interior air flow channels for temperature and moisture management
• Air extraction through rear vents to maximise airflow
• Rear deflector optimises the aerodynamics of this helmet
• Weight: 1450 grams (+/- 50 grams)
• ECE 22.06

There's nothing stingy about the Stinger 2 helmet.

This sporty, entry-level model offers high-end performance and features for an incredibly competitive price.

The MT Stinger 2 has the latest ECE22.06 safety requirements. This full face helmet has been improved in many ways, but still proves that MT excels in affordable high performance helmets. The new Stinger 2 features a larger spoiler for better aerodynamics at higher speeds, the ventilation has been improved for even more comfort, even on the most sunny days. The helmet is equipped with a MaxVision pinlock prepared visor for a large field of view, resulting in a lot of safety on the road. The MaxVision Pinlock can be ordered in the bundle.

With comfort in mind, the Stinger 2 is equipped with a nice wide collar and wind guard to reduce wind noise and improve comfort. The inner lining is fully removable and washable. The helmet is equipped with a steel micrometic chin closure that can be easily operated with gloves on. This new MT Stinger 2 is therefore extremely suitable for moped and scooter use, or for the novice motorcyclist.

Key Features
• Lightweight HIRP (High Impact Resistant Polymer) shell
• 1 outer shell size
• Hi-impact absorption inner shell
• Homologated front protection "P"
• Multiple density EPS liner
• Anti-allergenic, breathable, moisture-wicking fabric blend for comfort and durability
• Removable and washable liner
• Perfect fit thanks to different interior sizes
• Breath deflector to prevent screen fogging
• Prepared for an intercom system
• Micrometric buckle
• Visor: MT-V-28B
• High-quality optical polycarbonate visor with quick release and pivoting visor mechanism
• Pinlock MaxVision insert ready: DKS435
• Front and top air vents with open/close system
• Interior air flow channels for temperature and moisture management
• Air extraction through rear vents to maximise airflow
• Rear deflector optimises the aerodynamics of this helmet
• Weight: 1450 grams (+/- 50 grams)
• ECE 22.06

The perfect helmet for any use. This model has an excellent fitting and also attractive graphics. Special comfort fabrics.
Can be used like Snowmobile helmet with snow breathguard, snowmobile neck curtain and “double or electric lens”.

Features:

• Aerodynamic Shape
• Homologated Front Protection "P"
• Removable and Washable Pads
• Inner Shell with Hi-Impact Absortion
• Fire Retardant Fabric Lining
• Multiple Density Inner Shell
• Anti Scratch Visor in Optical Polycarbonate
• Quick Release Visor
• Optimum Visor Closing
• Pinlock Ready
• Metallic Quick Release Micrometric Buckle
• Weight 1450g
• MT-V-14 visor

MT’s do-it-all go anywhere helmet. For the urban commute or the long tour, the new Thunder 3 SV will accommodate any ride you throw at it. A multi dimensional fit and available in 2 shell sizes, this helmet will comfortably fit most head shapes. Features an internal drop down visor and a Pinlock Max vision visor.

Features:

• 4/5 Star Sharp Rating
• Drop Down Inner Sun Visor
• Hi-Impact Absorption Inner Shell
• Multiple Density EPS Liner
• Optimum Visor Closing
• Homologated Front Protection “P”
• Quick Release Micrometric Buckle
• 2 Outer Shell Sizes
• Pinlock Max Vision Visor
• Removable And Washable Liner
• Optically Correct Anti Scratch Polycarbonate Visor
• Quick Release Visor
• Aerodynamic Design
• Vent System
• ECE/ONU.22.05.P
• NBR7471
• NTC 4533
• ACU Gold Standard
• Glow In The Dark Features
• MT-V-12 Pinlock Max visor

Modular helmet wearers, rejoice! The AGV Sport Modular Carbon Helmet is here and ready to lay down those miles with you. Built with the AGV Pista GP R in mind, the Sportmodular has the same protection and lightweight construction. The helmet liner is two-sided and reversible, so you can pick the best level of comfort depending on the weather. The GT3 visor is prepared for the Pinlock 120 insert lens, which is race-level anti-fogging at your fingertips. Metal hardware at the chin bar closes the bar securely. Swap out the visor effortlessly with no tool required.

FIT: The AGV Sportmodular Carbon Helmet fits tight around the jaw and cheek, not unlike a full-face sport helmet. We have found this helmet to run slightly small, please size up if between sizes.

Features:

• 100% carbon fibre shell
• 3 shell sizes (XS-SM, MD-LG, XL-3XL)
• 5-density EPS in 4 sizes
• 100% carbon fibre chin bar engineered to guarantee maximum lightweight and balance even in the open configuration
• Shell shape designed to minimize the risk of impact energies being channeled to the collar bone
• Metal chin guard opening system designed to prevent accidental openings
• IVS (Integrated Ventilation System) with a large front vent, a chin guard vent and a rear extractor hollowed in the shell which directs air to the rider’s head without interference with the internal sun shield
• Internal chin channels distribute the air flow evenly through the entire shield surface
• Adjustable integrated spoiler reduces turbulence and maximizes stability
• Pressure-free interior fit
• Removable nose guard and wind protector
• Reversible crown pad features a double face use that allows the rider to select the preferred feel and climate: warmer side with Shalimar fabric for a soft and gentle touch and a cooler side with Ritmo fabric
• Neck roll made from Shalimar and Nabuk fabric with water resistant treatment prevents water from being channeled inside the helmet
• Cheek pads made from Ritmo fabric with Sanitized (antibacterial protection), 2Dry (moisture wicking) and Microsense (premium skin comfort and wearing fluidity) treatments
• Eyeglasses friendly
• Face shield prepared for 100% Max Vision Pinlock (120) anti-fog technology designed for maximum vertical view (85°) and unmatched horizontal view (190°)
• Pinlock insert lens included
• GT3 visor is anti-scratch and is in 2 sizes to optimize the correct fit between visor and shell in any size and to reduce air drafts and noise
• Integrated anti-scratch inner sun shield is removable without using tools and uses 2 sizes
• Visor Lock System (VLS) reduces the risk of accidental openings
• Metal face shield mechanism designed to minimize surface area, therefore supporting peripheral view and impact performance
• Rapid visor release system requires no tools and allows it to be removed and replaced in seconds
• Titanium Double D retention system (43% lighter than standard steel DD)
• Internal sun shield in light smoke
• DOT/ECE

The AGV AX-9 Carbon-Aramid Helmet is an all-new design over the popular AX-8 Dual EVO Helmet. It starts with an ultra-lightweight 100% carbon fibre shell and a redesigned peak for optimal aerodynamics. The peak itself is adjustable to reduce the sail effect at high speeds. Superior ventilation is achieved with 5 total vents: an adjustable chin-vent, two brow inlets and 2 extractors.  The design of this helmet also allows for four different configurations --  peak / visor, no peak / visor, peak / goggles, no peak / goggles -- meaning it can handle practically any riding scenario.

On the inside, the helmet has a fit to allow for comfort while wearing glasses and the padding is treated for optimal comfort. The cheek pads and top liner are moisture wicking and the neckroll is water resistant to prevent water from getting inside the helmet.

Features:

• Carbon-Aramid Fibreglass (Trail Gunmetal/Orange)
• Three shell sizes: XS-MS, ML-XL, 2XL
• Tool-less, removable chin vent guard
• Five vents: adjustable chin-vent, two brow inlets, 2 extractors
• Panoramic, Pinlock-ready visor 
• Adjustable peak to reduce sail effect
• Double-D strap
• Speaker pockets

The AGV AX-9 Carbon Helmet is an all-new design over the popular AX-8 Dual EVO Helmet. It starts with an ultra-lightweight 100% carbon fibre shell and a redesigned peak for optimal aerodynamics. The peak itself is adjustable to reduce the sail effect at high speeds. Superior ventilation is achieved with 5 total vents: an adjustable chin-vent, two brow inlets and 2 extractors.  The design of this helmet also allows for four different configurations --  peak / visor, no peak / visor, peak / goggles, no peak / goggles -- meaning it can handle practically any riding scenario.

On the inside, the helmet has a fit to allow for comfort while wearing glasses and the padding is treated for optimal comfort. The cheek pads and top liner are moisture wicking and the neckroll is water resistant to prevent water from getting inside the helmet.

Features:

• 100% carbon fibre shell
• Three shell sizes: XS-MS, ML-XL, 2XL
• Tool-less, removable chin vent guard
• Five vents: adjustable chin-vent, two brow inlets, 2 extractors
• Panoramic, Pinlock-ready visor 
• Adjustable peak to reduce sail effect
• Double-D strap
• Speaker pockets

The all-rounder from MT Helmets, the Atom 2 SV is built to win over long-distance riders. It's packed with features that make it a benchmark flip-up helmet, offering solutions typical of high-end models at a mid-range price.

It's a helmet designed from the outset to exceed ECE 22.06, making it a next-generation modular that will satisfy even the most demanding riders.

• The Atom 2 SV is the most versatile, complete and accessible modular helmet on the market.
• This model has shaken up its segment, as MT Helmets' recent releases have before it.
• It inherits its qualities from the MT Thunder 4 SV, a helmet that has become an international best-seller.

Safety:

• ECE 22.06 and DOT: The Atom 2 SV exceeds all safety standards.
• Micrometric closure: Micrometric safety buckle with the optimised MT-Micrometric+ system for enhanced effectiveness.

Visor:

• Optics: High-quality polycarbonate visor.
• Fit: Optimal sealing between shell and visor thanks to a rubber edge with a flexible lip.
• Anti-fog: The Atom 2 SV visor (MT-V-35) is compatible with FogOff FOG013 and Pinlock DKS512.
• MT-FSOS | Fast Shield Opening System: Quick visor opening with an automatic anti-fog position.
• Strength: Manufactured from high-impact-resistant materials.
• Sun visor: Yes. Retractable MT-ESP | Extended Sunvisor Protection system, offering complete coverage of the visual field.
  ​

The perfect helmet for any use, featuring a drop down sun visor. Produced in two shell sizes.
This model has an excellent fit and is available in a range of attractive graphics with special comfort fabrics and a quick release micrometric buckle for an enjoyable ride.

Features:

• Injected thermoplastic shell construction
• Multi-density EPS inner
• Quick release anti-scratch Pinlock Max Vision ready visor
• Drop down internal sun visor
• Removable washable interior lining
• Metallic Quick Release Micrometric Buckle
• Front and top air intake vents with rear exhaust
• Aerodynamic shape
• ECE 22.05 certified
• MT-V-14 visor

The perfect helmet for any use. This model has an excellent fitting and also attractive graphics. Special comfort fabrics.
Can be used like Snowmobile helmet with snow breathguard, snowmobile neck curtain and “double or electric lens”.

Features:

• Aerodynamic Shape
• Homologated Front Protection "P"
• Removable and Washable Pads
• Inner Shell with Hi-Impact Absortion
• Fire Retardant Fabric Lining
• Multiple Density Inner Shell
• Anti Scratch Visor in Optical Polycarbonate
• Quick Release Visor
• Optimum Visor Closing
• Pinlock Ready
• Metallic Quick Release Micrometric Buckle
• Weight 1450g
• MT-V-14 visor

The Falcon blends the comfort and riding characteristics of a off road helmet with race-bred aerodynamics and performance.
Equipped with plush interiors and an extended peak, the Falcon will let you ride on in comfort.

Features:

• 2 Shell sizes.
• HIRP shell construction.
• Removable and washable lining
• Hypoallergenic fabrics
• Inner ventilation
• Multi density inner polystyrene
• Helmet base neck brace ready
• Sportcam support
• Double "D" ring
• ECE and DOT certified
• XS-M 1350g; L-2XL 1400g (+/- 50g)

With the MT District SV S you can explore the hidden corners of your city, tackle obstacles on a trials bike or get around the farm. Its open face, multifunctional design makes it a compact, comfortable and practical choice for urban commutes, while the jet styling and internal drop-down sun visor make it ideal for trials riding and farm work.

• The District SV S is engineered for versatility: equally at home on urban streets, on a trials bike or around the farm.
• With ECE 22.06 and DOT certification, it delivers top-tier safety. It can be worn with or without the visor (jet style) and features an optimised ventilation system for any setting.
• Equipped with a retractable sun visor, a SportCam mount and Bluetooth compatibility, the District SV S merges innovation and functionality for the most demanding riders.

Features:

• Internal drop-down sun visor with 3 positions
• Visor with easy-release mechanism
• Shell in 2 sizes for an improved fit
• Injected thermoplastic shell
• Anti-sweat thermal interior, removable and washable
• Multi-density internal polystyrene
• Efficient internal ventilation system
• Approximate weight: 1,200 g (may vary with helmet size)

Safety:

• ECE 22.06 and DOT: The District SV S meets the highest safety standards.
• Removable visor: Allows different configurations.
• Interiors: Updated design and upgraded materials.
• Closure: Micrometric system, MT-MDTC | Micrometric Double Teeth Closure.
   

The MT Atom SV flip-up helmet has been designed with the long distance rider in mind. Featuring great ventilation, a rear spoiler for improved stability, an internal drop down sun visor and an anatomical liner for comfort. The Atom also features an upgraded visor mechanism and a Pinlock ready Max Vision Visor.

Features:

• Drop down internal sun visor
• High impact absorption inner shell
• Multiple density EPS liner
• Optimum visor closing
• Homologated front protection
• Quick release micrometric buckle
• Pinlock Max Vision visor
• A removable and washable liner
• Anti-scratch polycarbonate quick release visor
• Aerodynamic design
• Ventilation system
• ECE/ONU.22.05.P and DOT certified
• MT-V-16 visor

Note: Tinted visor pictured is available as an optional extra.

The MT Atom SV flip-up helmet has been designed with the long distance rider in mind. Featuring great ventilation, a rear spoiler for improved stability, an internal drop down sun visor and an anatomical liner for comfort. The Atom also features an upgraded visor mechanism and a Pinlock ready Max Vision Visor.

Features:

• Drop down internal sun visor
• High impact absorption inner shell
• Multiple density EPS liner
• Optimum visor closing
• Homologated front protection
• Quick release micrometric buckle
• Pinlock Max Vision visor
• A removable and washable liner
• Anti-scratch polycarbonate quick release visor
• Aerodynamic design
• Ventilation system
• ECE/ONU.22.05.P and DOT certified
• MT-V-16 visor
   

The perfect helmet for any use, featuring a drop down sun visor. Produced in two shell sizes.
This model has an excellent fit and is available in a range of attractive graphics with special comfort fabrics and a quick release micrometric buckle for an enjoyable ride.

Features:

• Injected thermoplastic shell construction
• Multi-density EPS inner
• Quick release anti-scratch Pinlock Max Vision ready visor
• Drop down internal sun visor
• Removable washable interior lining
• Metallic Quick Release Micrometric Buckle
• Front and top air intake vents with rear exhaust
• Aerodynamic shape
• ECE 22.05 certified
• MT-V-14 visor

The MT Atom SV flip-up helmet has been designed with the long distance rider in mind. Featuring great ventilation, a rear spoiler for improved stability, an internal drop down sun visor and an anatomical liner for comfort. The Atom also features an upgraded visor mechanism and a Pinlock ready Max Vision Visor.

Features:

• Drop down internal sun visor
• High impact absorption inner shell
• Multiple density EPS liner
• Optimum visor closing
• Homologated front protection
• Quick release micrometric buckle
• Pinlock Max Vision visor
• A removable and washable liner
• Anti-scratch polycarbonate quick release visor
• Aerodynamic design
• Ventilation system
• ECE/ONU.22.05.P and DOT certified
• MT-V-16 visor

Note: Tinted visor pictured is available as an optional extra.

The MT Atom SV flip-up helmet has been designed with the long distance rider in mind. Featuring great ventilation, a rear spoiler for improved stability, an internal drop down sun visor and an anatomical liner for comfort. The Atom also features an upgraded visor mechanism and a Pinlock ready Max Vision Visor.

Features:

• Drop down internal sun visor
• High impact absorption inner shell
• Multiple density EPS liner
• Optimum visor closing
• Homologated front protection
• Quick release micrometric buckle
• Pinlock Max Vision visor
• A removable and washable liner
• Anti-scratch polycarbonate quick release visor
• Aerodynamic design
• Ventilation system
• ECE/ONU.22.05.P and DOT certified
• MT-V-16 visor

Note: Tinted visor pictured is available as an optional extra.

MT’s do-it-all go anywhere helmet. For the urban commute or the long tour, the new Thunder 3 SV will accommodate any ride you throw at it. A multi dimensional fit and available in 2 shell sizes, this helmet will comfortably fit most head shapes. Features an internal drop down visor and a Pinlock Max vision visor.

Features:

• 4/5 Star Sharp Rating
• Drop Down Inner Sun Visor
• Hi-Impact Absorption Inner Shell
• Multiple Density EPS Liner
• Optimum Visor Closing
• Homologated Front Protection “P”
• Quick Release Micrometric Buckle
• 2 Outer Shell Sizes
• Pinlock Max Vision Visor
• Removable And Washable Liner
• Optically Correct Anti Scratch Polycarbonate Visor
• Quick Release Visor
• Aerodynamic Design
• Vent System
• ECE/ONU.22.05.P
• NBR7471
• NTC 4533
• ACU Gold Standard
• Glow In The Dark Features
• MT-V-12 Pinlock Max visor

The perfect sport helmet, now with a new innovative pro spoiler. Excellent fit with attractive graphics and comfort fabrics used internally!

Features:

• HIRP Shell (High Impact Resistant Polymer) , 1 shell size. Aerodynamic design
• New innovative spoiler design
• Removable and Washable lining
• Anti-allergic fabrics
• Inner ventilation system
• Pinlock Ready
• Full metallic micrometric buckle
• Multi-density inner polystyrene
• Optical polycarbonate, anti-scratch visor. Quick release function and locking system
• Pivoting visor mechanism
• Weight 1450g (+/- 50g)
• MT-V-14 visor, 2.2mm thickness

Note: Tinted visor pictured is available as an optional extra.

The perfect sport helmet, now with a new innovative pro spoiler. Excellent fit with attractive graphics and comfort fabrics used internally!

Features:

• HIRP Shell (High Impact Resistant Polymer) , 1 shell size. Aerodynamic design
• New innovative spoiler design
• Removable and Washable lining
• Anti-allergic fabrics
• Inner ventilation system
• Pinlock Ready
• Full metallic micrometric buckle
• Multi-density inner polystyrene
• Optical polycarbonate, anti-scratch visor. Quick release function and locking system
• Pivoting visor mechanism
• Weight 1450g (+/- 50g)
• MT-V-14 visor, 2.2mm thickness

The perfect sport helmet, now with a new innovative pro spoiler. Excellent fit with attractive graphics and comfort fabrics used internally!

Features:

• HIRP Shell (High Impact Resistant Polymer) , 1 shell size. Aerodynamic design
• New innovative spoiler design
• Removable and Washable lining
• Anti-allergic fabrics
• Inner ventilation system
• Pinlock Ready
• Full metallic micrometric buckle
• Multi-density inner polystyrene
• Optical polycarbonate, anti-scratch visor. Quick release function and locking system
• Pivoting visor mechanism
• Weight 1450g (+/- 50g)
• MT-V-14 visor, 2.2mm thickness

Note: Tinted visor pictured is available as an optional extra.

The perfect sport helmet, now with a new innovative pro spoiler. Excellent fit with attractive graphics and comfort fabrics used internally!

Features:

• HIRP Shell (High Impact Resistant Polymer) , 1 shell size. Aerodynamic design
• New innovative spoiler design
• Removable and Washable lining
• Anti-allergic fabrics
• Inner ventilation system
• Pinlock Ready
• Full metallic micrometric buckle
• Multi-density inner polystyrene
• Optical polycarbonate, anti-scratch visor. Quick release function and locking system
• Pivoting visor mechanism
• Weight 1450g (+/- 50g)
• MT-V-14 visor, 2.2mm thickness

The best helmet for any use, made from technologies developed for MotoGP™.

AGV fulfill all of your motorcycle helmet needs by harvesting the best characteristics from sport and touring helmets and infusing them into the AGV K6 Helmet. Its shell is comprised of carbon and aramid fibres for excellent protection - the K6's protective capacity is 48% higher than that required by legislation. All this plus lightness like none other. The helmet's versatility comes from its aerodynamic shape that works well in any riding position. Four different shell sizes allow for a broad size range to better fit your particular head circumference and shape. Moisture wicking liners absorb sweat to keep you comfortable on extended rides. The AGV K6 Helmet is the culmination of all of AGV's road helmet technology to create a single helmet for all riders. 

Features:

• Carbon-aramid shell
• 4 shell sizes: XS-SM, MS, ML-LG, XL-2XL
• 5 density EPS in 4 sizes
• Collarbone safe profile
• 5 adjustable front vents
• 1 wide rear vent
• Shell shaped designed to reduce turbulence and optimized for all riding positions
• Ritmo and Shalimar fabric cheek pads
• Shalimar fabric head liner
• Abrasion and water resistance neck roll for extra durability
• 2Dry moisture wicking system
• Eyeglasses friendly fit
• Removable breath guard included
• K6 helmet specific 4mm thick, anti-scratch Pinlock-ready visor
• Pinlock lens insert included
• Innovative shield pivot reduces size and weight
• Double-D chinstrap
• DOT and ECE approved

Protect your kids head while they are ripping through the track, make no compromises with the Rapide Pro. Built for track day enthusiasts who demand unparalleled performance, the Rapide Pro never ceases to deliver. Its lightweight Carbon fiber construction helps you stay agile and sharp on the track and also keeps your head toll-free on those long runs. It also comes with a push-to-release visor mechanism that makes opening and closing of the visor a breeze.

Features:

• Carbon fibre shell construction
• Multi-density EPS inner
• Removable washable interior lining
• Quick release anti-scratch Pinlock Max Vision visor
• Pinlock insert included
• Front and top air intake vents
• Aerodynamic shape with a rear spoiler
• Double-D ring fastener
• Weight approx: 1150g (+/-50g)
• ECE 22.05 certified

The best helmet for any use, made from technologies developed for MotoGP™.

AGV fulfill all of your motorcycle helmet needs by harvesting the best characteristics from sport and touring helmets and infusing them into the AGV K6 Helmet. Its shell is comprised of carbon and aramid fibres for excellent protection - the K6's protective capacity is 48% higher than that required by legislation. All this plus lightness like none other. The helmet's versatility comes from its aerodynamic shape that works well in any riding position. Four different shell sizes allow for a broad size range to better fit your particular head circumference and shape. Moisture wicking liners absorb sweat to keep you comfortable on extended rides. The AGV K6 Helmet is the culmination of all of AGV's road helmet technology to create a single helmet for all riders. 

Features:

• Carbon-aramid shell
• 4 shell sizes: XS-SM, MS, ML-LG, XL-2XL
• 5 density EPS in 4 sizes
• Collarbone safe profile
• 5 adjustable front vents
• 1 wide rear vent
• Shell shaped designed to reduce turbulence and optimized for all riding positions
• Ritmo and Shalimar fabric cheek pads
• Shalimar fabric head liner
• Abrasion and water resistance neck roll for extra durability
• 2Dry moisture wicking system
• Eyeglasses friendly fit
• Removable breath guard included
• K6 helmet specific 4mm thick, anti-scratch Pinlock-ready visor
• Pinlock lens insert included
• Innovative shield pivot reduces size and weight
• Double-D chinstrap
• DOT and ECE approved

Historic shapes and colours meet modern design. The Legends helmets immortalize riders and achievements that will never be forgotten. Comfort, protection and ventilation are key elements of these helmets that meet today's highest standards.

The AGV X3000 carries Agostini's signature and includes the contoured chin piece just as he liked it so that he could lean right up against the gas tank. It also features a dual button visor that can be opened with the left hand alone. While the exterior may look the same as it did in the 60's, the X3000 is packed with all the safety, ventilation and comfort you'd expect from a modern day AGV.

Features:

• ACF (Advanced Composite Fibre) fibreglass outer shell
• 3 shell sizes: XS-MS, ML-LG, XL-2XL
• Visor on/off air vent with channels hollowed in the shell
• Premium interior constructed of genuine leather and suede fabric with an embroidered logo
• Removable and washable interior (neck roll not removable)
• Double D-ring retention system

Modular helmet wearers, rejoice! The AGV Sport Modular Carbon Helmet is here and ready to lay down those miles with you. Built with the AGV Pista GP R in mind, the Sportmodular has the same protection and lightweight construction. The helmet liner is two-sided and reversible, so you can pick the best level of comfort depending on the weather. The GT3 visor is prepared for the Pinlock 120 insert lens, which is race-level anti-fogging at your fingertips. Metal hardware at the chin bar closes the bar securely. Swap out the visor effortlessly with no tool required.

FIT: The AGV Sportmodular Carbon Helmet fits tight around the jaw and cheek, not unlike a full-face sport helmet. We have found this helmet to run slightly small, please size up if between sizes.

Features:

• 100% carbon fibre shell
• 3 shell sizes (XS-SM, MD-LG, XL-3XL)
• 5-density EPS in 4 sizes
• 100% carbon fibre chin bar engineered to guarantee maximum lightweight and balance even in the open configuration
• Shell shape designed to minimize the risk of impact energies being channeled to the collar bone
• Metal chin guard opening system designed to prevent accidental openings
• IVS (Integrated Ventilation System) with a large front vent, a chin guard vent and a rear extractor hollowed in the shell which directs air to the rider’s head without interference with the internal sun shield
• Internal chin channels distribute the air flow evenly through the entire shield surface
• Adjustable integrated spoiler reduces turbulence and maximizes stability
• Pressure-free interior fit
• Removable nose guard and wind protector
• Reversible crown pad features a double face use that allows the rider to select the preferred feel and climate: warmer side with Shalimar fabric for a soft and gentle touch and a cooler side with Ritmo fabric
• Neck roll made from Shalimar and Nabuk fabric with water resistant treatment prevents water from being channeled inside the helmet
• Cheek pads made from Ritmo fabric with Sanitized (antibacterial protection), 2Dry (moisture wicking) and Microsense (premium skin comfort and wearing fluidity) treatments
• Eyeglasses friendly
• Face shield prepared for 100% Max Vision Pinlock (120) anti-fog technology designed for maximum vertical view (85°) and unmatched horizontal view (190°)
• Pinlock insert lens included
• GT3 visor is anti-scratch and is in 2 sizes to optimize the correct fit between visor and shell in any size and to reduce air drafts and noise
• Integrated anti-scratch inner sun shield is removable without using tools and uses 2 sizes
• Visor Lock System (VLS) reduces the risk of accidental openings
• Metal face shield mechanism designed to minimize surface area, therefore supporting peripheral view and impact performance
• Rapid visor release system requires no tools and allows it to be removed and replaced in seconds
• Titanium Double D retention system (43% lighter than standard steel DD)
• Internal sun shield in light smoke
• DOT/ECE

The most affordable helmet on the market, with the highest safety homologation. The MT Thunder 4 SV represents all the drive and technological evolution of MT Helmets.

The arrival of the new ECE 22.06 certification has made MT Helmets a specialist in safety homologations and sends a very clear message to the industry: now safety on a bike is within everyone’s reach.

Features:

• HIRP Shell (High Impact Resistant Polymer) for excellent impact response. 2 Shell Sizes
• Three-Point Protector System – The base of this helmet has a three-point support system that has been developed to provide good stability when the Thunder 4 SV is placed on flat surfaces. This makes it easier to handle the helmet for cleaning or maintenance, but also allows the elements inside the helmet to be insulated from the surface, protecting them from chafing and, above all, enhancing hygiene when using the helmet
• Airflow Channel System – Through fluid dynamics analysis, air channels have been designed to minimize air resistance and boost internal ventilation flow, reducing temperature and moisture inside the helmet
• Reduced Aero Drag Design – An aerodynamic design studied by the MT Helmets engineering team to reduce aerodynamic resistance as much as possible
• Racing Spoiler
   
• ECE R-22.06 (EU) Approved. This helmet exceeds the highest safety standards and has passed, since its launch, the new ECE 22.06 test required for the European market
• Micrometric Double Toothed Closure – Redesigned micrometric retention system to keep the helmet always fastened and secured. The MT Helmets engineering department has developed this system to ensure that the fastener is locked by at least two points, ensuring that the system is secured. This locking system, optimal for sport-touring models, offers the best balance between wearing comfort and safety
• 1650 (+/-50) grams, its weight is well distributed
   
• Quick Visor Swap System – A system designed in-house by the MT Helmets Engineering team. The first helmet to feature this technology. This system, which has been patented by MT Helmets, allows the rider to attach/detach the visor really quickly and comfortably without having to take the helmet off
• Extended Vision Area – The extended vision area allows riders to have better visibility of their surroundings, increasing ride comfort and improving the riding experience and safety on the bike
• Extended Sun Visor Protection – Retractable sun visor system offering extended protection, preventing distortion due to changes in light conditions. It comes with a mechanism that can be quickly and comfortably used with one hand. It is also detachable for easy cleaning and maintenance.
• Pinlock 100% Max Vision – The Thunder 4 SV features space for a Pinlock 100% Max Vision insert
   
• The interior pads have been developed specifically for each helmet size to fit all head sizes in an optimal way
• The materials used for the manufacture of these elements combine different fabrics that favor ventilation, exhaust moisture, and drying quickly
• Removable and washable liners that allow you to keep your helmet clean and fresh
• Emergency Release System – Quick release system for side pads for removing the helmet in case of an accident. This system prevents possible damage during a helmet removal maneuver
• Universal Intercom Cage – This helmet has been developed taking into account the needs arising from the incorporation of an intercom system and has specific spaces to fit an intercom communication system

The Falcon blends the comfort and riding characteristics of a off road helmet with race-bred aerodynamics and performance.
Equipped with plush interiors and an extended peak, the Falcon will let you ride on in comfort.

Features:

• 2 Shell sizes.
• HIRP shell construction.
• Removable and washable lining
• Hypoallergenic fabrics
• Inner ventilation
• Multi density inner polystyrene
• Helmet base neck brace ready
• Sportcam support
• Double "D" ring
• ECE and DOT certified
• XS-M 1350g; L-2XL 1400g (+/- 50g)

The Falcon blends the comfort and riding characteristics of a off road helmet with race-bred aerodynamics and performance.
Equipped with plush interiors and an extended peak, the Falcon will let you ride on in comfort.

Features:

• 2 Shell sizes.
• HIRP shell construction.
• Removable and washable lining
• Hypoallergenic fabrics
• Inner ventilation
• Multi density inner polystyrene
• Helmet base neck brace ready
• Sportcam support
• Double "D" ring
• ECE and DOT certified
• XS-M 1350g; L-2XL 1400g (+/- 50g)

The perfect helmet for any use. This model has an excellent fitting and also attractive graphics. Special comfort fabrics.
Can be used like Snowmobile helmet with snow breathguard, snowmobile neck curtain and “double or electric lens”.

Features:

• Aerodynamic Shape
• Homologated Front Protection "P"
• Removable and Washable Pads
• Inner Shell with Hi-Impact Absortion
• Fire Retardant Fabric Lining
• Multiple Density Inner Shell
• Anti Scratch Visor in Optical Polycarbonate
• Quick Release Visor
• Optimum Visor Closing
• Pinlock Ready
• Metallic Quick Release Micrometric Buckle
• Weight 1450g
• MT-V-14 visor

Classic lines and shape, the new Le Mans 2 SV helmet from MT offers a timeless design that still looks great today.

The inclusion of a multi-density EPS ensures safety and comfort and reduces bulky side padding.

A washable faux leather interior and micrometric buckle fastening add practicality.

Features:

• ECE 22.05 and DOT certified
• 2 shell sizes
• Quick release retention system
• Multi internal fabrics
• Retractable sun visor

Whether ripping through the track or threading through the highway, make no compromises with the Rapide Pro. Built for sports tourers and track day enthusiasts who demand unparalleled performance, the Rapide Pro never ceases to deliver. Its lightweight Carbon fiber construction helps you stay agile and sharp on the track and also keeps your head toll-free on those long runs. It also comes with a push-to-release visor mechanism that makes opening and closing of the visor a breeze. Overall, the Rapide Pro gives you the best of the track and the long road ahead in a single package.

Features:

• Carbon fibre shell construction
• Multi-density EPS inner
• Removable washable interior lining
• Quick release anti-scratch Pinlock Max Vision visor
• Pinlock insert included
• Front and top air intake vents
• Aerodynamic shape with a rear spoiler
• Double-D ring fastener
• Weight approx: 1300g (+/-50g)
• ECE 22.05 certified

Note: Tinted visor pictured is available as an optional extra.

The MT KRE SNAKE CARBON is a integral type helmet. This helmet is designed to offer the best protection at the most high speeds . Its exterior structure is made of carbon fiber , which provides greater protection and less weight.

Features:

• 3 dimensions of the cap.
  Carbon fiber shell.
  Removable and washable inner lining.
  Anti-allergic fabrics.
  Sizes XS- XXL.
  Anti-scratch visor in optical poly-carbonate.
  Tear off Compatible.
  Quick removal visor.
  Visor rotation mechanism.
  The nose deflector includes.
  Double “D” Ring.
  ECE / DOT.
  Internal ventilation.
  Optimum visor closure.
  Internal polystyrene with multiple density.
  MT-V-09 visor.
  Viewer 2.2 mm.
  Weight 1350 ±50 g.