All Helmets

The AGV AX-9 Carbon Helmet is an all-new design over the popular AX-8 Dual EVO Helmet. It starts with an ultra-lightweight 100% carbon fibre shell and a redesigned peak for optimal aerodynamics. The peak itself is adjustable to reduce the sail effect at high speeds. Superior ventilation is achieved with 5 total vents: an adjustable chin-vent, two brow inlets and 2 extractors.  The design of this helmet also allows for four different configurations --  peak / visor, no peak / visor, peak / goggles, no peak / goggles -- meaning it can handle practically any riding scenario.

On the inside, the helmet has a fit to allow for comfort while wearing glasses and the padding is treated for optimal comfort. The cheek pads and top liner are moisture wicking and the neckroll is water resistant to prevent water from getting inside the helmet.

Features:

• 100% carbon fibre shell
• Three shell sizes: XS-MS, ML-XL, 2XL
• Tool-less, removable chin vent guard
• Five vents: adjustable chin-vent, two brow inlets, 2 extractors
• Panoramic, Pinlock-ready visor 
• Adjustable peak to reduce sail effect
• Double-D strap
• Speaker pockets

The AGV AX-9 Carbon-Aramid Helmet is an all-new design over the popular AX-8 Dual EVO Helmet. It starts with an ultra-lightweight 100% carbon fibre shell and a redesigned peak for optimal aerodynamics. The peak itself is adjustable to reduce the sail effect at high speeds. Superior ventilation is achieved with 5 total vents: an adjustable chin-vent, two brow inlets and 2 extractors.  The design of this helmet also allows for four different configurations --  peak / visor, no peak / visor, peak / goggles, no peak / goggles -- meaning it can handle practically any riding scenario.

On the inside, the helmet has a fit to allow for comfort while wearing glasses and the padding is treated for optimal comfort. The cheek pads and top liner are moisture wicking and the neckroll is water resistant to prevent water from getting inside the helmet.

Features:

• Carbon-Aramid Fibreglass (Trail Gunmetal/Orange)
• Three shell sizes: XS-MS, ML-XL, 2XL
• Tool-less, removable chin vent guard
• Five vents: adjustable chin-vent, two brow inlets, 2 extractors
• Panoramic, Pinlock-ready visor 
• Adjustable peak to reduce sail effect
• Double-D strap
• Speaker pockets

The K3 SV was developed from the experience AGV gained during the design process of the Pista GP and Corsa helmets. Thanks to the use of Finite Element Analysis (FEM), the technical department developed a benchmark product in terms of comfort, aerodynamics and safety. This helmet has a wide appeal and is suitable for young riders with a passion for racing as well as for more mature riders looking for comfort and high performance characteristics.

Thanks to CFD Analysis (Computational fluid dynamics), the special ventilation system provides maximum airflow to the head through two front and side vents, one central vent and two extractors at the back of the helmet.

The sanitized Dry-Comfort internal components can be removed for washing. The mechanism for opening and closing the visor has three customisable settings according to helmet use (Touring, Race and City) and features the XQRS system for quick removal.

The K-3 SV has been designed to accept the new genreation bluetooth communication systems.


Features:

• 2 sizes of HIR-TH shell (High Resistance Thermoplastic Resin)
• Inner shell in EPS in 4 sizes; shell and EPS dimensions optimised using the FEM (Finite Elements Analysis) system
• Homologation: ECE 2205, DOT, JIS, NBR, AS/NZS
• Ventilation system designed and optimised in a wind tunnel, comprising 4 front vents (3 at the front and one on the chin guard) and 2 rear extractors
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor mechanism with PVS system (Perimetrical Visor Seal) for improved seal and protection against draughts and noise thanks to the seat for the visor edge
• GT 2 scratch-resistant, anti-fog polycarbonate visor with 100% protection from UV rays
• Integrated removable Sun Visor (ISV) with scratch-resistant visor with tool-free replacement system
• Removable breath deflector
• Removable windproof chin strap protection
• Fully removable and washable 3D inner liners
• Sanitised Dry-Comfort fabrics
• Micrometrically adjustable strap retention system
• Anti-theft ring on strap

AGV’s latest version of this premium sport helmet now features a new construction for the inner liner, designed with high-performance fabrics and with no stitching in sensitive areas, making for an extremely comfortable fit.
The lightweight shell is made from a carbonfiberglass mix, while stability and aerodynamic performance are maximized thanks to an incorporated spoiler.
The Integrated Ventilation System (IVS) has vents that are hollowed into the shell, and there’s also an internal drop-down sun visor, a removable nose guard and a new wind protector that keeps noise to a minimum.

Features

• Shell in CAF (carbon-fiberglass)
• IVS (Integrated Ventilation System) with channels hollowed directly in the shell
• Double D retention system
• Sun visor
• Multi Density EPS
• The internal shape of the helmet was specifically designed to decrease the risk damage to the collar bones in the event of a fall
• Patented XQRS (Extra Quick Release System) visor mechanism in metal for very fast tool-free removal
• The visor is fitted with a patented micro-opening system
• Visor GT2 (ML-L-XL-XXL sizes) and GT2-1 (XS-S-MS sizes)
• Integrated spoiler
• Rear air extractors can be opened and closed
• Central air vent for optimal air flow
• Pinlock included in the box

AGV’s latest version of this premium sport helmet now features a new construction for the inner liner, designed with high-performance fabrics and with no stitching in sensitive areas, making for an extremely comfortable fit.
The lightweight shell is made from a carbonfiberglass mix, while stability and aerodynamic performance are maximized thanks to an incorporated spoiler.
The Integrated Ventilation System (IVS) has vents that are hollowed into the shell, and there’s also an internal drop-down sun visor, a removable nose guard and a new wind protector that keeps noise to a minimum.

Features

• Shell in CAF (carbon-fiberglass)
• IVS (Integrated Ventilation System) with channels hollowed directly in the shell
• Double D retention system
• Sun visor
• Multi Density EPS
• The internal shape of the helmet was specifically designed to decrease the risk damage to the collar bones in the event of a fall
• Patented XQRS (Extra Quick Release System) visor mechanism in metal for very fast tool-free removal
• The visor is fitted with a patented micro-opening system
• Visor GT2 (ML-L-XL-XXL sizes) and GT2-1 (XS-S-MS sizes)
• Integrated spoiler
• Rear air extractors can be opened and closed
• Central air vent for optimal air flow
• Pinlock included in the box

AGV’s latest version of this premium sport helmet now features a new construction for the inner liner, designed with high-performance fabrics and with no stitching in sensitive areas, making for an extremely comfortable fit.
The lightweight shell is made from a carbonfiberglass mix, while stability and aerodynamic performance are maximized thanks to an incorporated spoiler.
The Integrated Ventilation System (IVS) has vents that are hollowed into the shell, and there’s also an internal drop-down sun visor, a removable nose guard and a new wind protector that keeps noise to a minimum.

Features

• Shell in CAF (carbon-fiberglass)
• IVS (Integrated Ventilation System) with channels hollowed directly in the shell
• Double D retention system
• Sun visor
• Multi Density EPS
• The internal shape of the helmet was specifically designed to decrease the risk damage to the collar bones in the event of a fall
• Patented XQRS (Extra Quick Release System) visor mechanism in metal for very fast tool-free removal
• The visor is fitted with a patented micro-opening system
• Visor GT2 (ML-L-XL-XXL sizes) and GT2-1 (XS-S-MS sizes)
• Integrated spoiler
• Rear air extractors can be opened and closed
• Central air vent for optimal air flow
• Pinlock included in the box

The best helmet for any use, made from technologies developed for MotoGP™.

AGV fulfill all of your motorcycle helmet needs by harvesting the best characteristics from sport and touring helmets and infusing them into the AGV K6 Helmet. Its shell is comprised of carbon and aramid fibres for excellent protection - the K6's protective capacity is 48% higher than that required by legislation. All this plus lightness like none other. The helmet's versatility comes from its aerodynamic shape that works well in any riding position. Four different shell sizes allow for a broad size range to better fit your particular head circumference and shape. Moisture wicking liners absorb sweat to keep you comfortable on extended rides. The AGV K6 Helmet is the culmination of all of AGV's road helmet technology to create a single helmet for all riders. 

Features:

• Carbon-aramid shell
• 4 shell sizes: XS-SM, MS, ML-LG, XL-2XL
• 5 density EPS in 4 sizes
• Collarbone safe profile
• 5 adjustable front vents
• 1 wide rear vent
• Shell shaped designed to reduce turbulence and optimized for all riding positions
• Ritmo and Shalimar fabric cheek pads
• Shalimar fabric head liner
• Abrasion and water resistance neck roll for extra durability
• 2Dry moisture wicking system
• Eyeglasses friendly fit
• Removable breath guard included
• K6 helmet specific 4mm thick, anti-scratch Pinlock-ready visor
• Pinlock lens insert included
• Innovative shield pivot reduces size and weight
• Double-D chinstrap
• DOT and ECE approved

The best helmet for any use, made from technologies developed for MotoGP™.

AGV fulfill all of your motorcycle helmet needs by harvesting the best characteristics from sport and touring helmets and infusing them into the AGV K6 Helmet. Its shell is comprised of carbon and aramid fibres for excellent protection - the K6's protective capacity is 48% higher than that required by legislation. All this plus lightness like none other. The helmet's versatility comes from its aerodynamic shape that works well in any riding position. Four different shell sizes allow for a broad size range to better fit your particular head circumference and shape. Moisture wicking liners absorb sweat to keep you comfortable on extended rides. The AGV K6 Helmet is the culmination of all of AGV's road helmet technology to create a single helmet for all riders. 

Features:

• Carbon-aramid shell
• 4 shell sizes: XS-SM, MS, ML-LG, XL-2XL
• 5 density EPS in 4 sizes
• Collarbone safe profile
• 5 adjustable front vents
• 1 wide rear vent
• Shell shaped designed to reduce turbulence and optimized for all riding positions
• Ritmo and Shalimar fabric cheek pads
• Shalimar fabric head liner
• Abrasion and water resistance neck roll for extra durability
• 2Dry moisture wicking system
• Eyeglasses friendly fit
• Removable breath guard included
• K6 helmet specific 4mm thick, anti-scratch Pinlock-ready visor
• Pinlock lens insert included
• Innovative shield pivot reduces size and weight
• Double-D chinstrap
• DOT and ECE approved

Modular helmet wearers, rejoice! The AGV Sport Modular Carbon Helmet is here and ready to lay down those miles with you. Built with the AGV Pista GP R in mind, the Sportmodular has the same protection and lightweight construction. The helmet liner is two-sided and reversible, so you can pick the best level of comfort depending on the weather. The GT3 visor is prepared for the Pinlock 120 insert lens, which is race-level anti-fogging at your fingertips. Metal hardware at the chin bar closes the bar securely. Swap out the visor effortlessly with no tool required.

FIT: The AGV Sportmodular Carbon Helmet fits tight around the jaw and cheek, not unlike a full-face sport helmet. We have found this helmet to run slightly small, please size up if between sizes.

Features:

• 100% carbon fibre shell
• 3 shell sizes (XS-SM, MD-LG, XL-3XL)
• 5-density EPS in 4 sizes
• 100% carbon fibre chin bar engineered to guarantee maximum lightweight and balance even in the open configuration
• Shell shape designed to minimize the risk of impact energies being channeled to the collar bone
• Metal chin guard opening system designed to prevent accidental openings
• IVS (Integrated Ventilation System) with a large front vent, a chin guard vent and a rear extractor hollowed in the shell which directs air to the rider’s head without interference with the internal sun shield
• Internal chin channels distribute the air flow evenly through the entire shield surface
• Adjustable integrated spoiler reduces turbulence and maximizes stability
• Pressure-free interior fit
• Removable nose guard and wind protector
• Reversible crown pad features a double face use that allows the rider to select the preferred feel and climate: warmer side with Shalimar fabric for a soft and gentle touch and a cooler side with Ritmo fabric
• Neck roll made from Shalimar and Nabuk fabric with water resistant treatment prevents water from being channeled inside the helmet
• Cheek pads made from Ritmo fabric with Sanitized (antibacterial protection), 2Dry (moisture wicking) and Microsense (premium skin comfort and wearing fluidity) treatments
• Eyeglasses friendly
• Face shield prepared for 100% Max Vision Pinlock (120) anti-fog technology designed for maximum vertical view (85°) and unmatched horizontal view (190°)
• Pinlock insert lens included
• GT3 visor is anti-scratch and is in 2 sizes to optimize the correct fit between visor and shell in any size and to reduce air drafts and noise
• Integrated anti-scratch inner sun shield is removable without using tools and uses 2 sizes
• Visor Lock System (VLS) reduces the risk of accidental openings
• Metal face shield mechanism designed to minimize surface area, therefore supporting peripheral view and impact performance
• Rapid visor release system requires no tools and allows it to be removed and replaced in seconds
• Titanium Double D retention system (43% lighter than standard steel DD)
• Internal sun shield in light smoke
• DOT/ECE

The MT Atom SV flip-up helmet has been designed with the long distance rider in mind. Featuring great ventilation, a rear spoiler for improved stability, an internal drop down sun visor and an anatomical liner for comfort. The Atom also features an upgraded visor mechanism and a Pinlock ready Max Vision Visor.

Features:

• Drop down internal sun visor
• High impact absorption inner shell
• Multiple density EPS liner
• Optimum visor closing
• Homologated front protection
• Quick release micrometric buckle
• Pinlock Max Vision visor
• A removable and washable liner
• Anti-scratch polycarbonate quick release visor
• Aerodynamic design
• Ventilation system
• ECE/ONU.22.05.P and DOT certified
• MT-V-16 visor
   

The new MT Atom 2 will shake the foundations of this segment.

The new MT Atom 2 is packed with compelling features; it has enhanced the outstanding qualities of its predecessor model and incorporated state-of-the-art innovations such as the housing for UCS MT-NSIC, the rapid-opening system MT-FSOS+, and the MT-ESP sun visor.

Helmet

• Composition: HIRP (High Impact Resistance Polymer)
• Number of Shells: 2 (XS to M and L to XXL)
• Number of EPS: 2 (XS to M and L to XXL)
• Available Sizes: XS to XXL

Interior

• EPS: Variable density EPS to ensure the best shock absorption
• Removable interior: All interiors are removable, using a combination of fabrics to offer the best comfort and durability
• Hygiene: Washable and antibacterial protection fabric
• Moisture: Fabric designed to facilitate the evacuation of moisture
• Fit: Perfect fit to the head thanks to the different sizes of the interiors
• Nose protector: Adjustable nose deflector with nose protection to reduce breath from fogging visor
• Chin curtain: Deflects hot air and limits dirt and debris from entering helmet
• UCS Intercom: Accommodates UCS bluetooth intercom system
• Micrometric closure: Micrometric safety closure with optimised MT-Micrometric+ system for improved vision protection

Ventilation

• Air vents: Front and top air vents with open/close system
• Internal channels: Interior air flow for temperature and moisture exhaustion
• Air extraction: Rear vents to let air out
• Rear spoiler: Rear deflector optimising the aerodynamics of this helmet

Visor

• Optics: Visor made from high-quality optical polycarbonate
• Fit: Optimal shell/visor seal thanks to a rubber strip with an adaptive lip
• Anti-Fog: The ATOM 2 SV (MT-V 35) visor is compatible with FogOff model FOG013 and Pinlock DKS512
• MT-FSOS+ |Fast Shield Opening System +: Quick button with automatic anti-fog position. This helmet has a quick opening that automatically moves the shield to the anti-fog position
• Durability: Made from highly impact-resistant materials
• Sun visor: MT-ESP | Extended Sunvisor Protection, a retractable visor system offering full field of view protection
• Smoke visor: Optional smoke visor (not included)

Safety

• ECE 22.06 and DOT: The new Atom 2 SV surpasses the demanding 22.06 regulation and DOT
• Micrometric closure: Double toothed safety closure with optimised MT-Micrometric+ system
• Eco-Conscious: Removable parts for easier maintenance/repair

The perfect helmet for any use, featuring a drop down sun visor. Produced in two shell sizes.
This model has an excellent fit and is available in a range of attractive graphics with special comfort fabrics and a quick release micrometric buckle for an enjoyable ride.

Features:

• Injected thermoplastic shell construction
• Multi-density EPS inner
• Quick release anti-scratch Pinlock Max Vision ready visor
• Drop down internal sun visor
• Removable washable interior lining
• Metallic Quick Release Micrometric Buckle
• Front and top air intake vents with rear exhaust
• Aerodynamic shape
• ECE 22.05 certified
• MT-V-14 visor

The perfect helmet for any use. This model has an excellent fitting and also attractive graphics. Special comfort fabrics.
Can be used like Snowmobile helmet with snow breathguard, snowmobile neck curtain and “double or electric lens”.

Features:

• Aerodynamic Shape
• Homologated Front Protection "P"
• Removable and Washable Pads
• Inner Shell with Hi-Impact Absortion
• Fire Retardant Fabric Lining
• Multiple Density Inner Shell
• Anti Scratch Visor in Optical Polycarbonate
• Quick Release Visor
• Optimum Visor Closing
• Pinlock Ready
• Metallic Quick Release Micrometric Buckle
• Weight 1450g
• MT-V-14 visor

MT’s do-it-all go anywhere helmet. For the urban commute or the long tour, the new Thunder 3 SV will accommodate any ride you throw at it. A multi dimensional fit and available in 2 shell sizes, this helmet will comfortably fit most head shapes. Features an internal drop down visor and a Pinlock Max vision visor.

Avaiable in XS to 3XL

Features:

• 4/5 Star Sharp Rating
• Drop Down Inner Sun Visor
• Hi-Impact Absorption Inner Shell
• Multiple Density EPS Liner
• Optimum Visor Closing
• Homologated Front Protection “P”
• Quick Release Micrometric Buckle
• 2 Outer Shell Sizes
• Pinlock Max Vision Visor
• Removable And Washable Liner
• Optically Correct Anti Scratch Polycarbonate Visor
• Quick Release Visor
• Aerodynamic Design
• Vent System
• ECE/ONU.22.05.P
• NBR7471
• NTC 4533
• ACU Gold Standard
• Glow In The Dark Features
• MT-V-12 Pinlock Max visor

The MT Atom SV flip-up helmet has been designed with the long distance rider in mind. Featuring great ventilation, a rear spoiler for improved stability, an internal drop down sun visor and an anatomical liner for comfort. The Atom also features an upgraded visor mechanism and a Pinlock ready Max Vision Visor.

Features:

• Drop down internal sun visor
• High impact absorption inner shell
• Multiple density EPS liner
• Optimum visor closing
• Homologated front protection
• Quick release micrometric buckle
• Pinlock Max Vision visor
• A removable and washable liner
• Anti-scratch polycarbonate quick release visor
• Aerodynamic design
• Ventilation system
• ECE/ONU.22.05.P and DOT certified
• MT-V-16 visor

Note: Tinted visor pictured is available as an optional extra.

The MT Atom SV flip-up helmet has been designed with the long distance rider in mind. Featuring great ventilation, a rear spoiler for improved stability, an internal drop down sun visor and an anatomical liner for comfort. The Atom also features an upgraded visor mechanism and a Pinlock ready Max Vision Visor.

Features:

• Drop down internal sun visor
• High impact absorption inner shell
• Multiple density EPS liner
• Optimum visor closing
• Homologated front protection
• Quick release micrometric buckle
• Pinlock Max Vision visor
• A removable and washable liner
• Anti-scratch polycarbonate quick release visor
• Aerodynamic design
• Ventilation system
• ECE/ONU.22.05.P and DOT certified
• MT-V-16 visor

Note: Tinted visor pictured is available as an optional extra.

MT’s do-it-all go anywhere helmet. For the urban commute or the long tour, the new Thunder 3 SV will accommodate any ride you throw at it. A multi dimensional fit and available in 2 shell sizes, this helmet will comfortably fit most head shapes. Features an internal drop down visor and a Pinlock Max vision visor.

Features:

• 4/5 Star Sharp Rating
• Drop Down Inner Sun Visor
• Hi-Impact Absorption Inner Shell
• Multiple Density EPS Liner
• Optimum Visor Closing
• Homologated Front Protection “P”
• Quick Release Micrometric Buckle
• 2 Outer Shell Sizes
• Pinlock Max Vision Visor
• Removable And Washable Liner
• Optically Correct Anti Scratch Polycarbonate Visor
• Quick Release Visor
• Aerodynamic Design
• Vent System
• ECE/ONU.22.05.P
• NBR7471
• NTC 4533
• ACU Gold Standard
• Glow In The Dark Features
• MT-V-12 Pinlock Max visor

MT’s do-it-all go anywhere helmet. For the urban commute or the long tour, the new Thunder 3 SV will accommodate any ride you throw at it. A multi dimensional fit and available in 2 shell sizes, this helmet will comfortably fit most head shapes. Features an internal drop down visor and a Pinlock Max vision visor.

Avaiable in XS to 3XL

Features:

• 4/5 Star Sharp Rating
• Drop Down Inner Sun Visor
• Hi-Impact Absorption Inner Shell
• Multiple Density EPS Liner
• Optimum Visor Closing
• Homologated Front Protection “P”
• Quick Release Micrometric Buckle
• 2 Outer Shell Sizes
• Pinlock Max Vision Visor
• Removable And Washable Liner
• Optically Correct Anti Scratch Polycarbonate Visor
• Quick Release Visor
• Aerodynamic Design
• Vent System
• ECE/ONU.22.05.P
• NBR7471
• NTC 4533
• ACU Gold Standard
• Glow In The Dark Features
• MT-V-12 Pinlock Max visor

MT’s do-it-all go anywhere helmet. For the urban commute or the long tour, the new Thunder 3 SV will accommodate any ride you throw at it. A multi dimensional fit and available in 2 shell sizes, this helmet will comfortably fit most head shapes. Features an internal drop down visor and a Pinlock Max vision visor.

Avaiable in XS to 3XL

Features:

• 4/5 Star Sharp Rating
• Drop Down Inner Sun Visor
• Hi-Impact Absorption Inner Shell
• Multiple Density EPS Liner
• Optimum Visor Closing
• Homologated Front Protection “P”
• Quick Release Micrometric Buckle
• 2 Outer Shell Sizes
• Pinlock Max Vision Visor
• Removable And Washable Liner
• Optically Correct Anti Scratch Polycarbonate Visor
• Quick Release Visor
• Aerodynamic Design
• Vent System
• ECE/ONU.22.05.P
• NBR7471
• NTC 4533
• ACU Gold Standard
• Glow In The Dark Features
• MT-V-12 Pinlock Max visor

The perfect sport helmet, now with a new innovative pro spoiler. Excellent fit with attractive graphics and comfort fabrics used internally!

Features:

• HIRP Shell (High Impact Resistant Polymer) , 1 shell size. Aerodynamic design
• New innovative spoiler design
• Removable and Washable lining
• Anti-allergic fabrics
• Inner ventilation system
• Pinlock Ready
• Full metallic micrometric buckle
• Multi-density inner polystyrene
• Optical polycarbonate, anti-scratch visor. Quick release function and locking system
• Pivoting visor mechanism
• Weight 1450g (+/- 50g)
• MT-V-14 visor, 2.2mm thickness

The perfect sport helmet, now with a new innovative pro spoiler. Excellent fit with attractive graphics and comfort fabrics used internally!

Features:

• HIRP Shell (High Impact Resistant Polymer) , 1 shell size. Aerodynamic design
• New innovative spoiler design
• Removable and Washable lining
• Anti-allergic fabrics
• Inner ventilation system
• Pinlock Ready
• Full metallic micrometric buckle
• Multi-density inner polystyrene
• Optical polycarbonate, anti-scratch visor. Quick release function and locking system
• Pivoting visor mechanism
• Weight 1450g (+/- 50g)
• MT-V-14 visor, 2.2mm thickness

Note: Tinted visor pictured is available as an optional extra.

The perfect sport helmet, now with a new innovative pro spoiler. Excellent fit with attractive graphics and comfort fabrics used internally!

Features:

• HIRP Shell (High Impact Resistant Polymer) , 1 shell size. Aerodynamic design
• New innovative spoiler design
• Removable and Washable lining
• Anti-allergic fabrics
• Inner ventilation system
• Pinlock Ready
• Full metallic micrometric buckle
• Multi-density inner polystyrene
• Optical polycarbonate, anti-scratch visor. Quick release function and locking system
• Pivoting visor mechanism
• Weight 1450g (+/- 50g)
• MT-V-14 visor, 2.2mm thickness

The best helmet for any use, made from technologies developed for MotoGP™.

AGV fulfill all of your motorcycle helmet needs by harvesting the best characteristics from sport and touring helmets and infusing them into the AGV K6 Helmet. Its shell is comprised of carbon and aramid fibres for excellent protection - the K6's protective capacity is 48% higher than that required by legislation. All this plus lightness like none other. The helmet's versatility comes from its aerodynamic shape that works well in any riding position. Four different shell sizes allow for a broad size range to better fit your particular head circumference and shape. Moisture wicking liners absorb sweat to keep you comfortable on extended rides. The AGV K6 Helmet is the culmination of all of AGV's road helmet technology to create a single helmet for all riders. 

Features:

• Carbon-aramid shell
• 4 shell sizes: XS-SM, MS, ML-LG, XL-2XL
• 5 density EPS in 4 sizes
• Collarbone safe profile
• 5 adjustable front vents
• 1 wide rear vent
• Shell shaped designed to reduce turbulence and optimized for all riding positions
• Ritmo and Shalimar fabric cheek pads
• Shalimar fabric head liner
• Abrasion and water resistance neck roll for extra durability
• 2Dry moisture wicking system
• Eyeglasses friendly fit
• Removable breath guard included
• K6 helmet specific 4mm thick, anti-scratch Pinlock-ready visor
• Pinlock lens insert included
• Innovative shield pivot reduces size and weight
• Double-D chinstrap
• DOT and ECE approved

AGV’s latest version of this premium sport helmet now features a new construction for the inner liner, designed with high-performance fabrics and with no stitching in sensitive areas, making for an extremely comfortable fit.
The lightweight shell is made from a carbonfiberglass mix, while stability and aerodynamic performance are maximized thanks to an incorporated spoiler.
The Integrated Ventilation System (IVS) has vents that are hollowed into the shell, and there’s also an internal drop-down sun visor, a removable nose guard and a new wind protector that keeps noise to a minimum.

Features

• Shell in CAF (carbon-fiberglass)
• IVS (Integrated Ventilation System) with channels hollowed directly in the shell
• Double D retention system
• Sun visor
• Multi Density EPS
• The internal shape of the helmet was specifically designed to decrease the risk damage to the collar bones in the event of a fall
• Patented XQRS (Extra Quick Release System) visor mechanism in metal for very fast tool-free removal
• The visor is fitted with a patented micro-opening system
• Visor GT2 (ML-L-XL-XXL sizes) and GT2-1 (XS-S-MS sizes)
• Integrated spoiler
• Rear air extractors can be opened and closed
• Central air vent for optimal air flow
• Pinlock included in the box

The AGV K1 Helmet has an aerodynamic shape, ventilation scheme, and spoiler developed for the wind tunnel tested Corsa R and Pista GP R. The shell and spoiler provide aerodynamic stability at speed and the spoiler itself features a passive rear vent to extract warm air from the helmet as you ride. The K1 also incorporates the central air intake above the visor taken directly from MotoGP developed Pista GP R to provide best-in-class ventilation.

Features:

• HIR-TH (High Resistance Thermoplastic Resin) shell construction
• 2 shell sizes, 4 EPS sizes
• Integrated Ventilation System (IVS) was designed and optimized in a wind tunnel
• 5 front vents (3 at the forehead and 2 on the chin guard) and 2 rear extractors vents built into spoiler
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor is scratch-resistant and anti-fog polycarbonate with 100% UV protection and is offered in 2 sizes dependent on helmet size
  • GT 2-1 for helmet sizes XS, SM and MS and GT 2 for sizes ML, LG, XL and 2XL
• Micro-opening visor
• Fully removable and washable 3D inner liner and cheek pads are sanitized and made from Dry-Lex fabrics
• Helmet profile contoured around the base to reduce the risk of collar bone injuries
• Double-D ring chin strap
• DOT/ECE approved

The AGV AX-9 Carbon-Aramid Helmet is an all-new design over the popular AX-8 Dual EVO Helmet. It starts with an ultra-lightweight 100% carbon fibre shell and a redesigned peak for optimal aerodynamics. The peak itself is adjustable to reduce the sail effect at high speeds. Superior ventilation is achieved with 5 total vents: an adjustable chin-vent, two brow inlets and 2 extractors.  The design of this helmet also allows for four different configurations --  peak / visor, no peak / visor, peak / goggles, no peak / goggles -- meaning it can handle practically any riding scenario.

On the inside, the helmet has a fit to allow for comfort while wearing glasses and the padding is treated for optimal comfort. The cheek pads and top liner are moisture wicking and the neckroll is water resistant to prevent water from getting inside the helmet.

Features:

• Carbon-Aramid Fibreglass (SIBERIA MATT BLACK/YELLOW FLURO)
• Three shell sizes: XS-MS, ML-XL, 2XL
• Tool-less, removable chin vent guard
• Five vents: adjustable chin-vent, two brow inlets, 2 extractors
• Panoramic, Pinlock-ready visor 
• Adjustable peak to reduce sail effect
• Double-D strap
• Speaker pockets

The AGV K1 Helmet has an aerodynamic shape, ventilation scheme, and spoiler developed for the wind tunnel tested Corsa R and Pista GP R. The shell and spoiler provide aerodynamic stability at speed and the spoiler itself features a passive rear vent to extract warm air from the helmet as you ride. The K1 also incorporates the central air intake above the visor taken directly from MotoGP developed Pista GP R to provide best-in-class ventilation.

Features:

• HIR-TH (High Resistance Thermoplastic Resin) shell construction
• 2 shell sizes, 4 EPS sizes
• Integrated Ventilation System (IVS) was designed and optimized in a wind tunnel
• 5 front vents (3 at the forehead and 2 on the chin guard) and 2 rear extractors vents built into spoiler
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor is scratch-resistant and anti-fog polycarbonate with 100% UV protection and is offered in 2 sizes dependent on helmet size
  • GT 2-1 for helmet sizes XS, SM and MS and GT 2 for sizes ML, LG, XL and 2XL
• Micro-opening visor
• Fully removable and washable 3D inner liner and cheek pads are sanitized and made from Dry-Lex fabrics
• Helmet profile contoured around the base to reduce the risk of collar bone injuries
• Double-D ring chin strap
• DOT/ECE approved

Historic shapes and colours meet modern design. The Legends helmets immortalize riders and achievements that will never be forgotten. Comfort, protection and ventilation are key elements of these helmets that meet today's highest standards.

Relive the 70's with the style that dominated adventure riding, the AGV X101 Helmet. A fiberglass constructed shell protects riders on the outside while the suede fabric interior keeps heads comfortable. The chin guard air vent was constructed to include a metal grill preventing dirt and debris from entering the helmet while cool air flows through. This goggle ready helmet also features a removable peak and fully removable cheek pads and helmet liner that are machine washable.

Features:

• Fiberglass construction
• 3 shell sizes
• Chin guard air vent
• Metal grill under the chin vent protects against dirt and debris
• Removable peak 
• Goggles ready
• Double D ring chinstrap
• Eco-leather and suede fabric interior
• Fully removable and washable liner and cheek pads

Historic shapes and colours meet modern design. The Legends helmets immortalize riders and achievements that will never be forgotten. Comfort, protection and ventilation are key elements of these helmets that meet today's highest standards.

The AGV X3000 carries Agostini's signature and includes the contoured chin piece just as he liked it so that he could lean right up against the gas tank. It also features a dual button visor that can be opened with the left hand alone. While the exterior may look the same as it did in the 60's, the X3000 is packed with all the safety, ventilation and comfort you'd expect from a modern day AGV.

Features:

• ACF (Advanced Composite Fibre) fibreglass outer shell
• 3 shell sizes: XS-MS, ML-LG, XL-2XL
• Visor on/off air vent with channels hollowed in the shell
• Premium interior constructed of genuine leather and suede fabric with an embroidered logo
• Removable and washable interior (neck roll not removable)
• Double D-ring retention system

The AGV K1 Helmet has an aerodynamic shape, ventilation scheme, and spoiler developed for the wind tunnel tested Corsa R and Pista GP R. The shell and spoiler provide aerodynamic stability at speed and the spoiler itself features a passive rear vent to extract warm air from the helmet as you ride. The K1 also incorporates the central air intake above the visor taken directly from MotoGP developed Pista GP R to provide best-in-class ventilation.

Features:

• HIR-TH (High Resistance Thermoplastic Resin) shell construction
• 2 shell sizes, 4 EPS sizes
• Integrated Ventilation System (IVS) was designed and optimized in a wind tunnel
• 5 front vents (3 at the forehead and 2 on the chin guard) and 2 rear extractors vents built into spoiler
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor is scratch-resistant and anti-fog polycarbonate with 100% UV protection and is offered in 2 sizes dependent on helmet size
  • GT 2-1 for helmet sizes XS, SM and MS and GT 2 for sizes ML, LG, XL and 2XL
• Micro-opening visor
• Fully removable and washable 3D inner liner and cheek pads are sanitized and made from Dry-Lex fabrics
• Helmet profile contoured around the base to reduce the risk of collar bone injuries
• Double-D ring chin strap
• DOT/ECE approved

AGV’s latest version of this premium sport helmet now features a new construction for the inner liner, designed with high-performance fabrics and with no stitching in sensitive areas, making for an extremely comfortable fit.
The lightweight shell is made from a carbonfiberglass mix, while stability and aerodynamic performance are maximized thanks to an incorporated spoiler.
The Integrated Ventilation System (IVS) has vents that are hollowed into the shell, and there’s also an internal drop-down sun visor, a removable nose guard and a new wind protector that keeps noise to a minimum.

Features

• Shell in CAF (carbon-fiberglass)
• IVS (Integrated Ventilation System) with channels hollowed directly in the shell
• Double D retention system
• Sun visor
• Multi Density EPS
• The internal shape of the helmet was specifically designed to decrease the risk damage to the collar bones in the event of a fall
• Patented XQRS (Extra Quick Release System) visor mechanism in metal for very fast tool-free removal
• The visor is fitted with a patented micro-opening system
• Visor GT2 (ML-L-XL-XXL sizes) and GT2-1 (XS-S-MS sizes)
• Integrated spoiler
• Rear air extractors can be opened and closed
• Central air vent for optimal air flow
• Pinlock included in the box

Modular helmet wearers, rejoice! The AGV Sport Modular Carbon Helmet is here and ready to lay down those miles with you. Built with the AGV Pista GP R in mind, the Sportmodular has the same protection and lightweight construction. The helmet liner is two-sided and reversible, so you can pick the best level of comfort depending on the weather. The GT3 visor is prepared for the Pinlock 120 insert lens, which is race-level anti-fogging at your fingertips. Metal hardware at the chin bar closes the bar securely. Swap out the visor effortlessly with no tool required.

FIT: The AGV Sportmodular Carbon Helmet fits tight around the jaw and cheek, not unlike a full-face sport helmet. We have found this helmet to run slightly small, please size up if between sizes.

Features:

• 100% carbon fibre shell
• 3 shell sizes (XS-SM, MD-LG, XL-3XL)
• 5-density EPS in 4 sizes
• 100% carbon fibre chin bar engineered to guarantee maximum lightweight and balance even in the open configuration
• Shell shape designed to minimize the risk of impact energies being channeled to the collar bone
• Metal chin guard opening system designed to prevent accidental openings
• IVS (Integrated Ventilation System) with a large front vent, a chin guard vent and a rear extractor hollowed in the shell which directs air to the rider’s head without interference with the internal sun shield
• Internal chin channels distribute the air flow evenly through the entire shield surface
• Adjustable integrated spoiler reduces turbulence and maximizes stability
• Pressure-free interior fit
• Removable nose guard and wind protector
• Reversible crown pad features a double face use that allows the rider to select the preferred feel and climate: warmer side with Shalimar fabric for a soft and gentle touch and a cooler side with Ritmo fabric
• Neck roll made from Shalimar and Nabuk fabric with water resistant treatment prevents water from being channeled inside the helmet
• Cheek pads made from Ritmo fabric with Sanitized (antibacterial protection), 2Dry (moisture wicking) and Microsense (premium skin comfort and wearing fluidity) treatments
• Eyeglasses friendly
• Face shield prepared for 100% Max Vision Pinlock (120) anti-fog technology designed for maximum vertical view (85°) and unmatched horizontal view (190°)
• Pinlock insert lens included
• GT3 visor is anti-scratch and is in 2 sizes to optimize the correct fit between visor and shell in any size and to reduce air drafts and noise
• Integrated anti-scratch inner sun shield is removable without using tools and uses 2 sizes
• Visor Lock System (VLS) reduces the risk of accidental openings
• Metal face shield mechanism designed to minimize surface area, therefore supporting peripheral view and impact performance
• Rapid visor release system requires no tools and allows it to be removed and replaced in seconds
• Titanium Double D retention system (43% lighter than standard steel DD)
• Internal sun shield in light smoke
• DOT/ECE

The best helmet for any use, made from technologies developed for MotoGP™.

AGV fulfill all of your motorcycle helmet needs by harvesting the best characteristics from sport and touring helmets and infusing them into the AGV K6 Helmet. Its shell is comprised of carbon and aramid fibres for excellent protection - the K6's protective capacity is 48% higher than that required by legislation. All this plus lightness like none other. The helmet's versatility comes from its aerodynamic shape that works well in any riding position. Four different shell sizes allow for a broad size range to better fit your particular head circumference and shape. Moisture wicking liners absorb sweat to keep you comfortable on extended rides. The AGV K6 Helmet is the culmination of all of AGV's road helmet technology to create a single helmet for all riders. 

Features:

• Carbon-aramid shell
• 4 shell sizes: XS-SM, MS, ML-LG, XL-2XL
• 5 density EPS in 4 sizes
• Collarbone safe profile
• 5 adjustable front vents
• 1 wide rear vent
• Shell shaped designed to reduce turbulence and optimized for all riding positions
• Ritmo and Shalimar fabric cheek pads
• Shalimar fabric head liner
• Abrasion and water resistance neck roll for extra durability
• 2Dry moisture wicking system
• Eyeglasses friendly fit
• Removable breath guard included
• K6 helmet specific 4mm thick, anti-scratch Pinlock-ready visor
• Pinlock lens insert included
• Innovative shield pivot reduces size and weight
• Double-D chinstrap
• DOT and ECE approved

AGV’s latest version of this premium sport helmet now features a new construction for the inner liner, designed with high-performance fabrics and with no stitching in sensitive areas, making for an extremely comfortable fit.
The lightweight shell is made from a carbonfiberglass mix, while stability and aerodynamic performance are maximized thanks to an incorporated spoiler.
The Integrated Ventilation System (IVS) has vents that are hollowed into the shell, and there’s also an internal drop-down sun visor, a removable nose guard and a new wind protector that keeps noise to a minimum.

Features

• Shell in CAF (carbon-fiberglass)
• IVS (Integrated Ventilation System) with channels hollowed directly in the shell
• Double D retention system
• Sun visor
• Multi Density EPS
• The internal shape of the helmet was specifically designed to decrease the risk damage to the collar bones in the event of a fall
• Patented XQRS (Extra Quick Release System) visor mechanism in metal for very fast tool-free removal
• The visor is fitted with a patented micro-opening system
• Visor GT2 (ML-L-XL-XXL sizes) and GT2-1 (XS-S-MS sizes)
• Integrated spoiler
• Rear air extractors can be opened and closed
• Central air vent for optimal air flow
• Pinlock included in the box

AGV’s latest version of this premium sport helmet now features a new construction for the inner liner, designed with high-performance fabrics and with no stitching in sensitive areas, making for an extremely comfortable fit.
The lightweight shell is made from a carbonfiberglass mix, while stability and aerodynamic performance are maximized thanks to an incorporated spoiler.
The Integrated Ventilation System (IVS) has vents that are hollowed into the shell, and there’s also an internal drop-down sun visor, a removable nose guard and a new wind protector that keeps noise to a minimum.

Features

• Shell in CAF (carbon-fiberglass)
• IVS (Integrated Ventilation System) with channels hollowed directly in the shell
• Double D retention system
• Sun visor
• Multi Density EPS
• The internal shape of the helmet was specifically designed to decrease the risk damage to the collar bones in the event of a fall
• Patented XQRS (Extra Quick Release System) visor mechanism in metal for very fast tool-free removal
• The visor is fitted with a patented micro-opening system
• Visor GT2 (ML-L-XL-XXL sizes) and GT2-1 (XS-S-MS sizes)
• Integrated spoiler
• Rear air extractors can be opened and closed
• Central air vent for optimal air flow
• Pinlock included in the box

The K3 SV was developed from the experience AGV gained during the design process of the Pista GP and Corsa helmets. Thanks to the use of Finite Element Analysis (FEM), the technical department developed a benchmark product in terms of comfort, aerodynamics and safety. This helmet has a wide appeal and is suitable for young riders with a passion for racing as well as for more mature riders looking for comfort and high performance characteristics.

Thanks to CFD Analysis (Computational fluid dynamics), the special ventilation system provides maximum airflow to the head through two front and side vents, one central vent and two extractors at the back of the helmet.

The sanitized Dry-Comfort internal components can be removed for washing. The mechanism for opening and closing the visor has three customisable settings according to helmet use (Touring, Race and City) and features the XQRS system for quick removal.

The K-3 SV has been designed to accept the new genreation bluetooth communication systems.


Features:

• 2 sizes of HIR-TH shell (High Resistance Thermoplastic Resin)
• Inner shell in EPS in 4 sizes; shell and EPS dimensions optimised using the FEM (Finite Elements Analysis) system
• Homologation: ECE 2205, DOT, JIS, NBR, AS/NZS
• Ventilation system designed and optimised in a wind tunnel, comprising 4 front vents (3 at the front and one on the chin guard) and 2 rear extractors
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor mechanism with PVS system (Perimetrical Visor Seal) for improved seal and protection against draughts and noise thanks to the seat for the visor edge
• GT 2 scratch-resistant, anti-fog polycarbonate visor with 100% protection from UV rays
• Integrated removable Sun Visor (ISV) with scratch-resistant visor with tool-free replacement system
• Removable breath deflector
• Removable windproof chin strap protection
• Fully removable and washable 3D inner liners
• Sanitised Dry-Comfort fabrics
• Micrometrically adjustable strap retention system
• Anti-theft ring on strap

The K3 SV was developed from the experience AGV gained during the design process of the Pista GP and Corsa helmets. Thanks to the use of Finite Element Analysis (FEM), the technical department developed a benchmark product in terms of comfort, aerodynamics and safety. This helmet has a wide appeal and is suitable for young riders with a passion for racing as well as for more mature riders looking for comfort and high performance characteristics.

Thanks to CFD Analysis (Computational fluid dynamics), the special ventilation system provides maximum airflow to the head through two front and side vents, one central vent and two extractors at the back of the helmet.

The sanitized Dry-Comfort internal components can be removed for washing. The mechanism for opening and closing the visor has three customisable settings according to helmet use (Touring, Race and City) and features the XQRS system for quick removal.

The K-3 SV has been designed to accept the new genreation bluetooth communication systems.


Features:

• 2 sizes of HIR-TH shell (High Resistance Thermoplastic Resin)
• Inner shell in EPS in 4 sizes; shell and EPS dimensions optimised using the FEM (Finite Elements Analysis) system
• Homologation: ECE 2205, DOT, JIS, NBR, AS/NZS
• Ventilation system designed and optimised in a wind tunnel, comprising 4 front vents (3 at the front and one on the chin guard) and 2 rear extractors
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor mechanism with PVS system (Perimetrical Visor Seal) for improved seal and protection against draughts and noise thanks to the seat for the visor edge
• GT 2 scratch-resistant, anti-fog polycarbonate visor with 100% protection from UV rays
• Integrated removable Sun Visor (ISV) with scratch-resistant visor with tool-free replacement system
• Removable breath deflector
• Removable windproof chin strap protection
• Fully removable and washable 3D inner liners
• Sanitised Dry-Comfort fabrics
• Micrometrically adjustable strap retention system
• Anti-theft ring on strap

The K3 SV was developed from the experience AGV gained during the design process of the Pista GP and Corsa helmets. Thanks to the use of Finite Element Analysis (FEM), the technical department developed a benchmark product in terms of comfort, aerodynamics and safety. This helmet has a wide appeal and is suitable for young riders with a passion for racing as well as for more mature riders looking for comfort and high performance characteristics.

Thanks to CFD Analysis (Computational fluid dynamics), the special ventilation system provides maximum airflow to the head through two front and side vents, one central vent and two extractors at the back of the helmet.

The sanitized Dry-Comfort internal components can be removed for washing. The mechanism for opening and closing the visor has three customisable settings according to helmet use (Touring, Race and City) and features the XQRS system for quick removal.

The K-3 SV has been designed to accept the new genreation bluetooth communication systems.


Features:

• 2 sizes of HIR-TH shell (High Resistance Thermoplastic Resin)
• Inner shell in EPS in 4 sizes; shell and EPS dimensions optimised using the FEM (Finite Elements Analysis) system
• Homologation: ECE 2205, DOT, JIS, NBR, AS/NZS
• Ventilation system designed and optimised in a wind tunnel, comprising 4 front vents (3 at the front and one on the chin guard) and 2 rear extractors
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor mechanism with PVS system (Perimetrical Visor Seal) for improved seal and protection against draughts and noise thanks to the seat for the visor edge
• GT 2 scratch-resistant, anti-fog polycarbonate visor with 100% protection from UV rays
• Integrated removable Sun Visor (ISV) with scratch-resistant visor with tool-free replacement system
• Removable breath deflector
• Removable windproof chin strap protection
• Fully removable and washable 3D inner liners
• Sanitised Dry-Comfort fabrics
• Micrometrically adjustable strap retention system
• Anti-theft ring on strap

The AGV K1 Helmet has an aerodynamic shape, ventilation scheme, and spoiler developed for the wind tunnel tested Corsa R and Pista GP R. The shell and spoiler provide aerodynamic stability at speed and the spoiler itself features a passive rear vent to extract warm air from the helmet as you ride. The K1 also incorporates the central air intake above the visor taken directly from MotoGP developed Pista GP R to provide best-in-class ventilation.

Features:

• HIR-TH (High Resistance Thermoplastic Resin) shell construction
• 2 shell sizes, 4 EPS sizes
• Integrated Ventilation System (IVS) was designed and optimized in a wind tunnel
• 5 front vents (3 at the forehead and 2 on the chin guard) and 2 rear extractors vents built into spoiler
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor is scratch-resistant and anti-fog polycarbonate with 100% UV protection and is offered in 2 sizes dependent on helmet size
  • GT 2-1 for helmet sizes XS, SM and MS and GT 2 for sizes ML, LG, XL and 2XL
• Micro-opening visor
• Fully removable and washable 3D inner liner and cheek pads are sanitized and made from Dry-Lex fabrics
• Helmet profile contoured around the base to reduce the risk of collar bone injuries
• Double-D ring chin strap
• DOT/ECE approved

The AGV K1 Helmet has an aerodynamic shape, ventilation scheme, and spoiler developed for the wind tunnel tested Corsa R and Pista GP R. The shell and spoiler provide aerodynamic stability at speed and the spoiler itself features a passive rear vent to extract warm air from the helmet as you ride. The K1 also incorporates the central air intake above the visor taken directly from MotoGP developed Pista GP R to provide best-in-class ventilation.

Features:

• HIR-TH (High Resistance Thermoplastic Resin) shell construction
• 2 shell sizes, 4 EPS sizes
• Integrated Ventilation System (IVS) was designed and optimized in a wind tunnel
• 5 front vents (3 at the forehead and 2 on the chin guard) and 2 rear extractors vents built into spoiler
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor is scratch-resistant and anti-fog polycarbonate with 100% UV protection and is offered in 2 sizes dependent on helmet size
  • GT 2-1 for helmet sizes XS, SM and MS and GT 2 for sizes ML, LG, XL and 2XL
• Micro-opening visor
• Fully removable and washable 3D inner liner and cheek pads are sanitized and made from Dry-Lex fabrics
• Helmet profile contoured around the base to reduce the risk of collar bone injuries
• Double-D ring chin strap
• DOT/ECE approved

The AGV K1 Helmet has an aerodynamic shape, ventilation scheme, and spoiler developed for the wind tunnel tested Corsa R and Pista GP R. The shell and spoiler provide aerodynamic stability at speed and the spoiler itself features a passive rear vent to extract warm air from the helmet as you ride. The K1 also incorporates the central air intake above the visor taken directly from MotoGP developed Pista GP R to provide best-in-class ventilation.

Features:

• HIR-TH (High Resistance Thermoplastic Resin) shell construction
• 2 shell sizes, 4 EPS sizes
• Integrated Ventilation System (IVS) was designed and optimized in a wind tunnel
• 5 front vents (3 at the forehead and 2 on the chin guard) and 2 rear extractors vents built into spoiler
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor is scratch-resistant and anti-fog polycarbonate with 100% UV protection and is offered in 2 sizes dependent on helmet size
  • GT 2-1 for helmet sizes XS, SM and MS and GT 2 for sizes ML, LG, XL and 2XL
• Micro-opening visor
• Fully removable and washable 3D inner liner and cheek pads are sanitized and made from Dry-Lex fabrics
• Helmet profile contoured around the base to reduce the risk of collar bone injuries
• Double-D ring chin strap
• DOT/ECE approved

The AGV K1 Helmet has an aerodynamic shape, ventilation scheme, and spoiler developed for the wind tunnel tested Corsa R and Pista GP R. The shell and spoiler provide aerodynamic stability at speed and the spoiler itself features a passive rear vent to extract warm air from the helmet as you ride. The K1 also incorporates the central air intake above the visor taken directly from MotoGP developed Pista GP R to provide best-in-class ventilation.

Features:

• HIR-TH (High Resistance Thermoplastic Resin) shell construction
• 2 shell sizes, 4 EPS sizes
• Integrated Ventilation System (IVS) was designed and optimized in a wind tunnel
• 5 front vents (3 at the forehead and 2 on the chin guard) and 2 rear extractors vents built into spoiler
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor is scratch-resistant and anti-fog polycarbonate with 100% UV protection and is offered in 2 sizes dependent on helmet size
  • GT 2-1 for helmet sizes XS, SM and MS and GT 2 for sizes ML, LG, XL and 2XL
• Micro-opening visor
• Fully removable and washable 3D inner liner and cheek pads are sanitized and made from Dry-Lex fabrics
• Helmet profile contoured around the base to reduce the risk of collar bone injuries
• Double-D ring chin strap
• DOT/ECE approved

The best helmet for any use, made from technologies developed for MotoGP™.

AGV fulfill all of your motorcycle helmet needs by harvesting the best characteristics from sport and touring helmets and infusing them into the AGV K6 Helmet. Its shell is comprised of carbon and aramid fibres for excellent protection - the K6's protective capacity is 48% higher than that required by legislation. All this plus lightness like none other. The helmet's versatility comes from its aerodynamic shape that works well in any riding position. Four different shell sizes allow for a broad size range to better fit your particular head circumference and shape. Moisture wicking liners absorb sweat to keep you comfortable on extended rides. The AGV K6 Helmet is the culmination of all of AGV's road helmet technology to create a single helmet for all riders. 

Features:

• Carbon-aramid shell
• 4 shell sizes: XS-SM, MS, ML-LG, XL-2XL
• 5 density EPS in 4 sizes
• Collarbone safe profile
• 5 adjustable front vents
• 1 wide rear vent
• Shell shaped designed to reduce turbulence and optimized for all riding positions
• Ritmo and Shalimar fabric cheek pads
• Shalimar fabric head liner
• Abrasion and water resistance neck roll for extra durability
• 2Dry moisture wicking system
• Eyeglasses friendly fit
• Removable breath guard included
• K6 helmet specific 4mm thick, anti-scratch Pinlock-ready visor
• Pinlock lens insert included
• Innovative shield pivot reduces size and weight
• Double-D chinstrap
• DOT and ECE approved