Street / Sport

Historic shapes and colours meet modern design. The Legends helmets immortalize riders and achievements that will never be forgotten. Comfort, protection and ventilation are key elements of these helmets that meet today's highest standards.

The AGV X3000 carries Agostini's signature and includes the contoured chin piece just as he liked it so that he could lean right up against the gas tank. It also features a dual button visor that can be opened with the left hand alone. While the exterior may look the same as it did in the 60's, the X3000 is packed with all the safety, ventilation and comfort you'd expect from a modern day AGV.

Features:

• ACF (Advanced Composite Fibre) fibreglass outer shell
• 3 shell sizes: XS-MS, ML-LG, XL-2XL
• Visor on/off air vent with channels hollowed in the shell
• Premium interior constructed of genuine leather and suede fabric with an embroidered logo
• Removable and washable interior (neck roll not removable)
• Double D-ring retention system

Historic shapes and colours meet modern design. The Legends helmets immortalize riders and achievements that will never be forgotten. Comfort, protection and ventilation are key elements of these helmets that meet today's highest standards.

The AGV X3000 carries Agostini's signature and includes the contoured chin piece just as he liked it so that he could lean right up against the gas tank. It also features a dual button visor that can be opened with the left hand alone. While the exterior may look the same as it did in the 60's, the X3000 is packed with all the safety, ventilation and comfort you'd expect from a modern day AGV.

Features:

• ACF (Advanced Composite Fibre) fibreglass outer shell
• 3 shell sizes: XS-MS, ML-LG, XL-2XL
• Visor on/off air vent with channels hollowed in the shell
• Premium interior constructed of genuine leather and suede fabric with an embroidered logo
• Removable and washable interior (neck roll not removable)
• Double D-ring retention system

Historic shapes and colours meet modern design. The Legends helmets immortalize riders and achievements that will never be forgotten. Comfort, protection and ventilation are key elements of these helmets that meet today's highest standards.

The AGV X3000 carries Agostini's signature and includes the contoured chin piece just as he liked it so that he could lean right up against the gas tank. It also features a dual button visor that can be opened with the left hand alone. While the exterior may look the same as it did in the 60's, the X3000 is packed with all the safety, ventilation and comfort you'd expect from a modern day AGV.

Features:

• ACF (Advanced Composite Fibre) fibreglass outer shell
• 3 shell sizes: XS-MS, ML-LG, XL-2XL
• Visor on/off air vent with channels hollowed in the shell
• Premium interior constructed of genuine leather and suede fabric with an embroidered logo
• Removable and washable interior (neck roll not removable)
• Double D-ring retention system

Refer to diagram for dimensions.

Murdock risers for Harley big twins are available in straight and pullback models and a broad range of rises. Investment-cast clamps, TIG-welded chromoly uprights and CNC lathe-turned mounting bases create a handlebar riser with unrivaled stiffness and strength for aggressive, technical and high-speed riding.

Features:

• Available styles: straight and pullback
• Available rise heights: 8", 10" and 12" 
• Available finishes: Black electroplate and mirror chrome-plated
• Investment-cast one-piece steel bar clamp accepts 1-inch O.D. handlebars
• 0.120-inch (3mm) wall x 1" O.D. 4130 chromoly uprights
• CNC lathe-turned mounting bases accept 1/2-13 t.p.i. stock and aftermarket mounting hardware
• Mounting holes on 3.5-inch centres to fit most stock and select aftermarket H-D fork trees
• TIG welded and hand polished before polishing
• Pullback Murdock risers feature mandrel-bent uprights for two inches of rearward bar offset—perfect for reducing reach for shorter riders
• Stainless-steel 5/16-18 t.p.i. bar clamp hardware
• Technischer Überwachungsverein (Technical Inspection Association, or TüV) in Germany is an independent laboratory that tests the fatigue strength, manufacturing quality, and fitment for a wide range of consumer products, with special emphasis on automotive and motorcycle components and accessories. Biltwell handlebars and risers that have received TüV verification are among the strongest and most thoroughly well-tested motorcycle parts in the world.

Form & Function:

When we introduced our Murdock risers to the custom H-D scene, "club-style" Harleys were just gaining traction among high-performance riders on both coasts of the US. Our precision-crafted chromoly steel riser became a top choice among high-speed Dyna and Sportster riders. The 12 o'clock wheelie and tire-smoking crowd appreciated Murdock's stiffness and reliability compared to cast or CNC'ed aluminum risers instantly. Combined with any handlebar from our Tracker line, Murdock risers create a cockpit you can depend on for life in the fast lane. 

Like other leather/textile hybrids on the sport bike grid, our Bridgeport gloves feature rugged construction and a racy silhouette. Padding and reinforcement in key impact and friction zones means our most advanced three-season riding glove is ready for business when action heats up.

Features:

• Supple goatskin leather palm, fingertips, thumb, and friction zones
• Flexible thermoplastic rubber wrist tab with molded impact protection
• Anatomically shaped synthetic suede palm panel with Lycra flex zone
• Comfortable two-way stretch laminated neoprene wrist panel
• Ballistic nylon finger, hand, and knuckle guard panels
• Conductive stitching in fingers and thumb lets you operate smart screens
• Lycra expansion panels in finger joints for added dexterity
• Padded high-impact plastic knuckle guard with three-ply vented panel
• Silicone traction logo on palm
• Molded plastic finger vents
• Fully CE certified

Form & Function:

Building a premium glove is easier said than done. How do we know? Look at our competition. Most of the gloves in Bridgeport’s performance category look like props in a low-budget sci-fi movie. Bridgeport eschews over-the-top aesthetics to deliver comfortable, feature-packed protection for people who take riding seriously.

Like other leather/textile hybrids on the sport bike grid, our Bridgeport gloves feature rugged construction and a racy silhouette. Padding and reinforcement in key impact and friction zones means our most advanced three-season riding glove is ready for business when action heats up.

Features:

• Supple goatskin leather palm, fingertips, thumb, and friction zones
• Flexible thermoplastic rubber wrist tab with molded impact protection
• Anatomically shaped synthetic suede palm panel with Lycra flex zone
• Comfortable two-way stretch laminated neoprene wrist panel
• Ballistic nylon finger, hand, and knuckle guard panels
• Conductive stitching in fingers and thumb lets you operate smart screens
• Lycra expansion panels in finger joints for added dexterity
• Padded high-impact plastic knuckle guard with three-ply vented panel
• Silicone traction logo on palm
• Molded plastic finger vents
• Fully CE certified

Form & Function:

Building a premium glove is easier said than done. How do we know? Look at our competition. Most of the gloves in Bridgeport’s performance category look like props in a low-budget sci-fi movie. Bridgeport eschews over-the-top aesthetics to deliver comfortable, feature-packed protection for people who take riding seriously.

Like other leather/textile hybrids on the sport bike grid, our Bridgeport gloves feature rugged construction and a racy silhouette. Padding and reinforcement in key impact and friction zones means our most advanced three-season riding glove is ready for business when action heats up.

Features:

• Supple goatskin leather palm, fingertips, thumb, and friction zones
• Flexible thermoplastic rubber wrist tab with molded impact protection
• Anatomically shaped synthetic suede palm panel with Lycra flex zone
• Comfortable two-way stretch laminated neoprene wrist panel
• Ballistic nylon finger, hand, and knuckle guard panels
• Conductive stitching in fingers and thumb lets you operate smart screens
• Lycra expansion panels in finger joints for added dexterity
• Padded high-impact plastic knuckle guard with three-ply vented panel
• Silicone traction logo on palm
• Molded plastic finger vents
• Fully CE certified

Form & Function:

Building a premium glove is easier said than done. How do we know? Look at our competition. Most of the gloves in Bridgeport’s performance category look like props in a low-budget sci-fi movie. Bridgeport eschews over-the-top aesthetics to deliver comfortable, feature-packed protection for people who take riding seriously.

Like other leather/textile hybrids on the sport bike grid, our Bridgeport gloves feature rugged construction and a racy silhouette. Padding and reinforcement in key impact and friction zones means our most advanced three-season riding glove is ready for business when action heats up.

Features:

• Supple goatskin leather palm, fingertips, thumb, and friction zones
• Flexible thermoplastic rubber wrist tab with molded impact protection
• Anatomically shaped synthetic suede palm panel with Lycra flex zone
• Comfortable two-way stretch laminated neoprene wrist panel
• Ballistic nylon finger, hand, and knuckle guard panels
• Conductive stitching in fingers and thumb lets you operate smart screens
• Lycra expansion panels in finger joints for added dexterity
• Padded high-impact plastic knuckle guard with three-ply vented panel
• Silicone traction logo on palm
• Molded plastic finger vents
• Fully CE certified

Form & Function:

Building a premium glove is easier said than done. How do we know? Look at our competition. Most of the gloves in Bridgeport’s performance category look like props in a low-budget sci-fi movie. Bridgeport eschews over-the-top aesthetics to deliver comfortable, feature-packed protection for people who take riding seriously.

This is the bag that started our EXFIL motorcycle luggage revolution. In military parlance "EXFIL" means to leave in a rapid, organized fashion—the way every smart bikerider likes to ride. The number means this EXFIL bag holds seven 350ml beer cans, and is a naming convention that carries throughout our moto luggage line.

Features:

• MOLLE system on exterior lets you attach and expand this bag with other bags and accessories
• Rugged, rust-free nylon zippers throughout
• Duraflex quick-release buckles with adjustable nylon straps for speedy installation
• UV-treated, 1680 denier polyester nylon construction
• PVC coated synthetic mounting straps with nickel-plated stainless buckles
• External chassis panels are PVC backed for added water resistance
• Interior volume holds seven 350ml / 12oz cans
• Hi-vis orange nylon interior makes spotting contents easier
• One main and three secondary pockets offer plenty of room for gear, maps, and other essentials

Install Tips:

Like all our luggage designs, you can mount EXFIL-7 anywhere. On our personal bikes we've mounted over-stuffed EXFIL-7's on the down tube, over the headlight on tall risers, and on both sides of the sissy bar. A pair of EXFIL-7's will hang perfectly on H-D fender struts to create a set of mini saddle bags. EXFIL-7's MOLLE system and reinforced PVC straps make all these options possible. Once mounted, EXFIL-7 gobbles up personal gear like wallets, pocket knives, phones, tools and other stuff to become the glove box most motorcycles need but don't have.

Santa Cruz Skateboards is one of those brands we have looked up to since Biltwell’s founding in 2006. Their mission statement sums it up perfectly “To inspire fans of skateboarding and art by drawing from our past, in the present, for the future…” Created in 1985 by Jim Phillips, the Screaming Hand is one of the most recognizable skate logos of all time and we thought it was the perfect fit for a collaboration on this limited edition Gringo helmet.

Features:

• Exclusive Biltwell + Santa Cruz Skateboards box complete with Screaming Hand graphic
• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. To meet Europe's new, more robust standards for impact attenuation and rider safety, ECE R22.06-certified helmets may fit you more snugly than similar US DOT-compliant models. NOTE: We offer accessory cheek pads so you can fine-tune the comfort of your helmet against your cheeks and face for a perfect fit.

An old favorite but now with a new fit and new features. Our latest Gringo S helmet now meets the new European ECE 22.06 regs. The shield mechanism now uses the same anti-rattle closure featured on our Lane Splitter helmets. Three shell sizes replace the previous two for improved fit and comfort.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

An old favorite but now with a new fit and new features. Our latest Gringo S helmet now meets the new European ECE 22.06 regs. The shield mechanism now uses the same anti-rattle closure featured on our Lane Splitter helmets. Three shell sizes replace the previous two for improved fit and comfort.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved. We will have replacement shields in different tints available soon!

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

An old favorite but now with a new fit and new features. Our latest Gringo S helmet now meets the new European ECE 22.06 regs. The shield mechanism now uses the same anti-rattle closure featured on our Lane Splitter helmets. Three shell sizes replace the previous two for improved fit and comfort.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved. We will have replacement shields in different tints available soon!

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

An old favorite but now with a new fit and new features. Our latest Gringo S helmet now meets the new European ECE 22.06 regs. The shield mechanism now uses the same anti-rattle closure featured on our Lane Splitter helmets. Three shell sizes replace the previous two for improved fit and comfort.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved. 

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

An old favorite but now with a new fit and new features. Our latest Gringo S helmet now meets the new European ECE 22.06 regs. The shield mechanism now uses the same anti-rattle closure featured on our Lane Splitter helmets. Three shell sizes replace the previous two for improved fit and comfort.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved. We will have replacement shields in different tints available soon!

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.