Street / Sport

Modular helmet wearers, rejoice! The AGV Sport Modular Carbon Helmet is here and ready to lay down those miles with you. Built with the AGV Pista GP R in mind, the Sportmodular has the same protection and lightweight construction. The helmet liner is two-sided and reversible, so you can pick the best level of comfort depending on the weather. The GT3 visor is prepared for the Pinlock 120 insert lens, which is race-level anti-fogging at your fingertips. Metal hardware at the chin bar closes the bar securely. Swap out the visor effortlessly with no tool required.

FIT: The AGV Sportmodular Carbon Helmet fits tight around the jaw and cheek, not unlike a full-face sport helmet. We have found this helmet to run slightly small, please size up if between sizes.

Features:

• 100% carbon fibre shell
• 3 shell sizes (XS-SM, MD-LG, XL-3XL)
• 5-density EPS in 4 sizes
• 100% carbon fibre chin bar engineered to guarantee maximum lightweight and balance even in the open configuration
• Shell shape designed to minimize the risk of impact energies being channeled to the collar bone
• Metal chin guard opening system designed to prevent accidental openings
• IVS (Integrated Ventilation System) with a large front vent, a chin guard vent and a rear extractor hollowed in the shell which directs air to the rider’s head without interference with the internal sun shield
• Internal chin channels distribute the air flow evenly through the entire shield surface
• Adjustable integrated spoiler reduces turbulence and maximizes stability
• Pressure-free interior fit
• Removable nose guard and wind protector
• Reversible crown pad features a double face use that allows the rider to select the preferred feel and climate: warmer side with Shalimar fabric for a soft and gentle touch and a cooler side with Ritmo fabric
• Neck roll made from Shalimar and Nabuk fabric with water resistant treatment prevents water from being channeled inside the helmet
• Cheek pads made from Ritmo fabric with Sanitized (antibacterial protection), 2Dry (moisture wicking) and Microsense (premium skin comfort and wearing fluidity) treatments
• Eyeglasses friendly
• Face shield prepared for 100% Max Vision Pinlock (120) anti-fog technology designed for maximum vertical view (85°) and unmatched horizontal view (190°)
• Pinlock insert lens included
• GT3 visor is anti-scratch and is in 2 sizes to optimize the correct fit between visor and shell in any size and to reduce air drafts and noise
• Integrated anti-scratch inner sun shield is removable without using tools and uses 2 sizes
• Visor Lock System (VLS) reduces the risk of accidental openings
• Metal face shield mechanism designed to minimize surface area, therefore supporting peripheral view and impact performance
• Rapid visor release system requires no tools and allows it to be removed and replaced in seconds
• Titanium Double D retention system (43% lighter than standard steel DD)
• Internal sun shield in light smoke
• DOT/ECE

Modular helmet wearers, rejoice! The AGV Sport Modular Carbon Helmet is here and ready to lay down those miles with you. Built with the AGV Pista GP R in mind, the Sportmodular has the same protection and lightweight construction. The helmet liner is two-sided and reversible, so you can pick the best level of comfort depending on the weather. The GT3 visor is prepared for the Pinlock 120 insert lens, which is race-level anti-fogging at your fingertips. Metal hardware at the chin bar closes the bar securely. Swap out the visor effortlessly with no tool required.

FIT: The AGV Sportmodular Carbon Helmet fits tight around the jaw and cheek, not unlike a full-face sport helmet. We have found this helmet to run slightly small, please size up if between sizes.

Features:

• 100% carbon fibre shell
• 3 shell sizes (XS-SM, MD-LG, XL-3XL)
• 5-density EPS in 4 sizes
• 100% carbon fibre chin bar engineered to guarantee maximum lightweight and balance even in the open configuration
• Shell shape designed to minimize the risk of impact energies being channeled to the collar bone
• Metal chin guard opening system designed to prevent accidental openings
• IVS (Integrated Ventilation System) with a large front vent, a chin guard vent and a rear extractor hollowed in the shell which directs air to the rider’s head without interference with the internal sun shield
• Internal chin channels distribute the air flow evenly through the entire shield surface
• Adjustable integrated spoiler reduces turbulence and maximizes stability
• Pressure-free interior fit
• Removable nose guard and wind protector
• Reversible crown pad features a double face use that allows the rider to select the preferred feel and climate: warmer side with Shalimar fabric for a soft and gentle touch and a cooler side with Ritmo fabric
• Neck roll made from Shalimar and Nabuk fabric with water resistant treatment prevents water from being channeled inside the helmet
• Cheek pads made from Ritmo fabric with Sanitized (antibacterial protection), 2Dry (moisture wicking) and Microsense (premium skin comfort and wearing fluidity) treatments
• Eyeglasses friendly
• Face shield prepared for 100% Max Vision Pinlock (120) anti-fog technology designed for maximum vertical view (85°) and unmatched horizontal view (190°)
• Pinlock insert lens included
• GT3 visor is anti-scratch and is in 2 sizes to optimize the correct fit between visor and shell in any size and to reduce air drafts and noise
• Integrated anti-scratch inner sun shield is removable without using tools and uses 2 sizes
• Visor Lock System (VLS) reduces the risk of accidental openings
• Metal face shield mechanism designed to minimize surface area, therefore supporting peripheral view and impact performance
• Rapid visor release system requires no tools and allows it to be removed and replaced in seconds
• Titanium Double D retention system (43% lighter than standard steel DD)
• Internal sun shield in light smoke
• DOT/ECE

The new Streetmodular is homologated according to the new ECE 22.06 regulation and the dual P/J homologation. The Streetmodular has been designed to tackle long trips with maximum comfort and safety. Outer shell made of High Resistance Thermoplastic. It also has an integrated sun visor, as well as an efficient integrated ventilation system.

Technical Features:

• Available in 2 exterior sizes to adjust to the physical complexion of each rider. The interior incorporates a multi density EPS (internal structure) with 3 sizes of inner EPS.
• Metal chin guard opening mechanism that prevents accidental opening. The metal chin guard locking system ensures dual P/J homologation.
• The shape of the helmet has been designed to minimize the risk of the energy generated by an eventual impact being transmitted to the collarbone area.
• The ventilation system is made up of 2 air inlets in the front area and 1 rear extractor.
• The interior has been designed to offer a stable, enveloping and pressure-free fit to minimize noise inside the helmet, as well as maximum comfort. It has Sanitized treatment (antibacterial), DrySpeed (for excellent moisture absorption).
• Embracing Neck Profile roll for added comfort and protection.
• The interior is completely removable and washable.
• Side padding design optimized for glasses wearers.
• The new optical class 1 anti-scratch visor has been designed to offer a 190 degrees of horizontal vision. Includes a Pinlock (70). The screen is up to 4mm thick for added security.
• It has a micro-opening system for the screen.
• Integrated sun visor with anti-scratch treatment; easily removable without tools.
• The screen incorporates a patented closing system (VLS) that prevents its accidental opening.
• Chin cover included.
• Ready for generic communication systems.
• Micrometric closure system.
• It has P/J homologation to circulate in total safety both with the helmet closed in full-face mode and with the helmet open in jet mode.

The new Streetmodular is homologated according to the new ECE 22.06 regulation and the dual P/J homologation. The Streetmodular has been designed to tackle long trips with maximum comfort and safety. Outer shell made of High Resistance Thermoplastic. It also has an integrated sun visor, as well as an efficient integrated ventilation system.

Technical Features:

• Available in 2 exterior sizes to adjust to the physical complexion of each rider. The interior incorporates a multi density EPS (internal structure) with 3 sizes of inner EPS.
• Metal chin guard opening mechanism that prevents accidental opening. The metal chin guard locking system ensures dual P/J homologation.
• The shape of the helmet has been designed to minimize the risk of the energy generated by an eventual impact being transmitted to the collarbone area.
• The ventilation system is made up of 2 air inlets in the front area and 1 rear extractor.
• The interior has been designed to offer a stable, enveloping and pressure-free fit to minimize noise inside the helmet, as well as maximum comfort. It has Sanitized treatment (antibacterial), DrySpeed (for excellent moisture absorption).
• Embracing Neck Profile roll for added comfort and protection.
• The interior is completely removable and washable.
• Side padding design optimized for glasses wearers.
• The new optical class 1 anti-scratch visor has been designed to offer a 190 degrees of horizontal vision. Includes a Pinlock (70). The screen is up to 4mm thick for added security.
• It has a micro-opening system for the screen.
• Integrated sun visor with anti-scratch treatment; easily removable without tools.
• The screen incorporates a patented closing system (VLS) that prevents its accidental opening.
• Chin cover included.
• Ready for generic communication systems.
• Micrometric closure system.
• It has P/J homologation to circulate in total safety both with the helmet closed in full-face mode and with the helmet open in jet mode.

The new Streetmodular is homologated according to the new ECE 22.06 regulation and the dual P/J homologation. The Streetmodular has been designed to tackle long trips with maximum comfort and safety. Outer shell made of High Resistance Thermoplastic. It also has an integrated sun visor, as well as an efficient integrated ventilation system.

Technical Features:

• Available in 2 exterior sizes to adjust to the physical complexion of each rider. The interior incorporates a multi density EPS (internal structure) with 3 sizes of inner EPS.
• Metal chin guard opening mechanism that prevents accidental opening. The metal chin guard locking system ensures dual P/J homologation.
• The shape of the helmet has been designed to minimize the risk of the energy generated by an eventual impact being transmitted to the collarbone area.
• The ventilation system is made up of 2 air inlets in the front area and 1 rear extractor.
• The interior has been designed to offer a stable, enveloping and pressure-free fit to minimize noise inside the helmet, as well as maximum comfort. It has Sanitized treatment (antibacterial), DrySpeed (for excellent moisture absorption).
• Embracing Neck Profile roll for added comfort and protection.
• The interior is completely removable and washable.
• Side padding design optimized for glasses wearers.
• The new optical class 1 anti-scratch visor has been designed to offer a 190 degrees of horizontal vision. Includes a Pinlock (70). The screen is up to 4mm thick for added security.
• It has a micro-opening system for the screen.
• Integrated sun visor with anti-scratch treatment; easily removable without tools.
• The screen incorporates a patented closing system (VLS) that prevents its accidental opening.
• Chin cover included.
• Ready for generic communication systems.
• Micrometric closure system.
• It has P/J homologation to circulate in total safety both with the helmet closed in full-face mode and with the helmet open in jet mode.

The new MT Atom 2 will shake the foundations of this segment.

The new MT Atom 2 is packed with compelling features; it has enhanced the outstanding qualities of its predecessor model and incorporated state-of-the-art innovations such as the housing for UCS MT-NSIC, the rapid-opening system MT-FSOS+, and the MT-ESP sun visor.

Helmet

• Composition: HIRP (High Impact Resistance Polymer)
• Number of Shells: 2 (XS to M and L to XXL)
• Number of EPS: 2 (XS to M and L to XXL)
• Available Sizes: XS to XXL

Interior

• EPS: Variable density EPS to ensure the best shock absorption
• Removable interior: All interiors are removable, using a combination of fabrics to offer the best comfort and durability
• Hygiene: Washable and antibacterial protection fabric
• Moisture: Fabric designed to facilitate the evacuation of moisture
• Fit: Perfect fit to the head thanks to the different sizes of the interiors
• Nose protector: Adjustable nose deflector with nose protection to reduce breath from fogging visor
• Chin curtain: Deflects hot air and limits dirt and debris from entering helmet
• UCS Intercom: Accommodates UCS bluetooth intercom system
• Micrometric closure: Micrometric safety closure with optimised MT-Micrometric+ system for improved vision protection

Ventilation

• Air vents: Front and top air vents with open/close system
• Internal channels: Interior air flow for temperature and moisture exhaustion
• Air extraction: Rear vents to let air out
• Rear spoiler: Rear deflector optimising the aerodynamics of this helmet

Visor

• Optics: Visor made from high-quality optical polycarbonate
• Fit: Optimal shell/visor seal thanks to a rubber strip with an adaptive lip
• Anti-Fog: The ATOM 2 SV (MT-V 35) visor is compatible with FogOff model FOG013 and Pinlock DKS512
• MT-FSOS+ |Fast Shield Opening System +: Quick button with automatic anti-fog position. This helmet has a quick opening that automatically moves the shield to the anti-fog position
• Durability: Made from highly impact-resistant materials
• Sun visor: MT-ESP | Extended Sunvisor Protection, a retractable visor system offering full field of view protection
• Smoke visor: Optional smoke visor (not included)

Safety

• ECE 22.06 and DOT: The new Atom 2 SV surpasses the demanding 22.06 regulation and DOT
• Micrometric closure: Double toothed safety closure with optimised MT-Micrometric+ system
• Eco-Conscious: Removable parts for easier maintenance/repair

The MT Atom SV flip-up helmet has been designed with the long distance rider in mind. Featuring great ventilation, a rear spoiler for improved stability, an internal drop down sun visor and an anatomical liner for comfort. The Atom also features an upgraded visor mechanism and a Pinlock ready Max Vision Visor.

Features:

• Drop down internal sun visor
• High impact absorption inner shell
• Multiple density EPS liner
• Optimum visor closing
• Homologated front protection
• Quick release micrometric buckle
• Pinlock Max Vision visor
• A removable and washable liner
• Anti-scratch polycarbonate quick release visor
• Aerodynamic design
• Ventilation system
• ECE/ONU.22.05.P and DOT certified
• MT-V-16 visor
   

The MT Atom SV flip-up helmet has been designed with the long distance rider in mind. Featuring great ventilation, a rear spoiler for improved stability, an internal drop down sun visor and an anatomical liner for comfort. The Atom also features an upgraded visor mechanism and a Pinlock ready Max Vision Visor.

Features:

• Drop down internal sun visor
• High impact absorption inner shell
• Multiple density EPS liner
• Optimum visor closing
• Homologated front protection
• Quick release micrometric buckle
• Pinlock Max Vision visor
• A removable and washable liner
• Anti-scratch polycarbonate quick release visor
• Aerodynamic design
• Ventilation system
• ECE/ONU.22.05.P and DOT certified
• MT-V-16 visor
   

The MT Atom SV flip-up helmet has been designed with the long distance rider in mind. Featuring great ventilation, a rear spoiler for improved stability, an internal drop down sun visor and an anatomical liner for comfort. The Atom also features an upgraded visor mechanism and a Pinlock ready Max Vision Visor.

Features:

• Drop down internal sun visor
• High impact absorption inner shell
• Multiple density EPS liner
• Optimum visor closing
• Homologated front protection
• Quick release micrometric buckle
• Pinlock Max Vision visor
• A removable and washable liner
• Anti-scratch polycarbonate quick release visor
• Aerodynamic design
• Ventilation system
• ECE/ONU.22.05.P and DOT certified
• MT-V-16 visor
   

The MT Atom SV flip-up helmet has been designed with the long distance rider in mind. Featuring great ventilation, a rear spoiler for improved stability, an internal drop down sun visor and an anatomical liner for comfort. The Atom also features an upgraded visor mechanism and a Pinlock ready Max Vision Visor.

Features:

• Drop down internal sun visor
• High impact absorption inner shell
• Multiple density EPS liner
• Optimum visor closing
• Homologated front protection
• Quick release micrometric buckle
• Pinlock Max Vision visor
• A removable and washable liner
• Anti-scratch polycarbonate quick release visor
• Aerodynamic design
• Ventilation system
• ECE/ONU.22.05.P and DOT certified
• MT-V-16 visor
   

The MT Atom SV flip-up helmet has been designed with the long distance rider in mind. Featuring great ventilation, a rear spoiler for improved stability, an internal drop down sun visor and an anatomical liner for comfort. The Atom also features an upgraded visor mechanism and a Pinlock ready Max Vision Visor.

Features:

• Drop down internal sun visor
• High impact absorption inner shell
• Multiple density EPS liner
• Optimum visor closing
• Homologated front protection
• Quick release micrometric buckle
• Pinlock Max Vision visor
• A removable and washable liner
• Anti-scratch polycarbonate quick release visor
• Aerodynamic design
• Ventilation system
• ECE/ONU.22.05.P and DOT certified
• MT-V-16 visor
   

The MT Atom SV flip-up helmet has been designed with the long distance rider in mind. Featuring great ventilation, a rear spoiler for improved stability, an internal drop down sun visor and an anatomical liner for comfort. The Atom also features an upgraded visor mechanism and a Pinlock ready Max Vision Visor.

Features:

• Drop down internal sun visor
• High impact absorption inner shell
• Multiple density EPS liner
• Optimum visor closing
• Homologated front protection
• Quick release micrometric buckle
• Pinlock Max Vision visor
• A removable and washable liner
• Anti-scratch polycarbonate quick release visor
• Aerodynamic design
• Ventilation system
• ECE/ONU.22.05.P and DOT certified
• MT-V-16 visor

Note: Tinted visor pictured is available as an optional extra.

The MT Atom SV flip-up helmet has been designed with the long distance rider in mind. Featuring great ventilation, a rear spoiler for improved stability, an internal drop down sun visor and an anatomical liner for comfort. The Atom also features an upgraded visor mechanism and a Pinlock ready Max Vision Visor.

Features:

• Drop down internal sun visor
• High impact absorption inner shell
• Multiple density EPS liner
• Optimum visor closing
• Homologated front protection
• Quick release micrometric buckle
• Pinlock Max Vision visor
• A removable and washable liner
• Anti-scratch polycarbonate quick release visor
• Aerodynamic design
• Ventilation system
• ECE/ONU.22.05.P and DOT certified
• MT-V-16 visor

Note: Tinted visor pictured is available as an optional extra.

The MT Atom SV flip-up helmet has been designed with the long distance rider in mind. Featuring great ventilation, a rear spoiler for improved stability, an internal drop down sun visor and an anatomical liner for comfort. The Atom also features an upgraded visor mechanism and a Pinlock ready Max Vision Visor.

Features:

• Drop down internal sun visor
• High impact absorption inner shell
• Multiple density EPS liner
• Optimum visor closing
• Homologated front protection
• Quick release micrometric buckle
• Pinlock Max Vision visor
• A removable and washable liner
• Anti-scratch polycarbonate quick release visor
• Aerodynamic design
• Ventilation system
• ECE/ONU.22.05.P and DOT certified
• MT-V-16 visor

Note: Tinted visor pictured is available as an optional extra.

MT presents the new R22.06 trials/jet open face helmet, the District SV S. The District SV S is ideal for use in trials or on the farm thanks to its open face design and internal drop-down sun visor.

Features:

• Drop down internal sun visor
• Integrated sun visor with 3 positions
• Screen with easy release mechanism
• Shell in 2 sizes for an improved fit
• Shell made of injected thermoplastic
• Anti-sweat interiorthermal, removable and washable
• System with metallic micrometric closure
• Internal multiple density polystyrene
• Efficient internal ventilation system
• Approximate weight: 1,200gr (weight may vary depending on the size of the helmet)
• Approved according to ECE 22-06 regulations

MT presents the new R22.06 trials/jet open face helmet, the District SV S. The District SV S is ideal for use in trials or on the farm thanks to its open face design and internal drop-down sun visor.

Features:

• Drop down internal sun visor
• Integrated sun visor with 3 positions
• Screen with easy release mechanism
• Shell in 2 sizes for an improved fit
• Shell made of injected thermoplastic
• Anti-sweat interiorthermal, removable and washable
• System with metallic micrometric closure
• Internal multiple density polystyrene
• Efficient internal ventilation system
• Approximate weight: 1,200gr (weight may vary depending on the size of the helmet)
• Approved according to ECE 22-06 regulations

MT presents the new R22.06 trials/jet open face helmet, the District SV S. The District SV S is ideal for use in trials or on the farm thanks to its open face design and internal drop-down sun visor.

Features:

• Drop down internal sun visor
• Integrated sun visor with 3 positions
• Screen with easy release mechanism
• Shell in 2 sizes for an improved fit
• Shell made of injected thermoplastic
• Anti-sweat interiorthermal, removable and washable
• System with metallic micrometric closure
• Internal multiple density polystyrene
• Efficient internal ventilation system
• Approximate weight: 1,200gr (weight may vary depending on the size of the helmet)
• Approved according to ECE 22-06 regulations

MT presents the new R22.06 trials/jet open face helmet, the District SV S. The District SV S is ideal for use in trials or on the farm thanks to its open face design and internal drop-down sun visor.

Features:

• Drop down internal sun visor
• Integrated sun visor with 3 positions
• Screen with easy release mechanism
• Shell in 2 sizes for an improved fit
• Shell made of injected thermoplastic
• Anti-sweat interiorthermal, removable and washable
• System with metallic micrometric closure
• Internal multiple density polystyrene
• Efficient internal ventilation system
• Approximate weight: 1,200gr (weight may vary depending on the size of the helmet)
• Approved according to ECE 22-06 regulations

MT presents the new R22.06 trials/jet open face helmet, the District SV S. The District SV S is ideal for use in trials or on the farm thanks to its open face design and internal drop-down sun visor.

Features:

• Drop down internal sun visor
• Integrated sun visor with 3 positions
• Screen with easy release mechanism
• Shell in 2 sizes for an improved fit
• Shell made of injected thermoplastic
• Anti-sweat interiorthermal, removable and washable
• System with metallic micrometric closure
• Internal multiple density polystyrene
• Efficient internal ventilation system
• Approximate weight: 1,200gr (weight may vary depending on the size of the helmet)
• Approved according to ECE 22-06 regulations

MT presents the new R22.06 trials/jet open face helmet, the District SV S. The District SV S is ideal for use in trials or on the farm thanks to its open face design and internal drop-down sun visor.

Features:

• Drop down internal sun visor
• Integrated sun visor with 3 positions
• Screen with easy release mechanism
• Shell in 2 sizes for an improved fit
• Shell made of injected thermoplastic
• Anti-sweat interiorthermal, removable and washable
• System with metallic micrometric closure
• Internal multiple density polystyrene
• Efficient internal ventilation system
• Approximate weight: 1,200gr (weight may vary depending on the size of the helmet)
• Approved according to ECE 22-06 regulations

The MT Genesis is the latest update in the MT Helmets collection. The Genesis was designed with the sports and touring market in mind. Thanks to its many options, this helmet is your ideal travel partner for every ride. The motorcycle and scooter helmet is designed with the most modern and best techniques. All this to guarantee safety, protection and comfort during the entire ride. The helmet is equipped with the latest safety standards and meets the ECE-22.06 and DOT approval. This means that the helmet is permitted on public roads throughout Europe and the rest of the world as a motorcycle and scooter helmet. The helmet is equipped with a metal micrometic closure.

For optimal comfort, the helmet is equipped with ventilation on the front, top and back. The large anti-scratch visor provides a wide field of view for optimal safety. The visor has a Pinlock preparation to prevent the visor from fogging up while driving. The Pinlock lens can be ordered in the bundle. The helmet is equipped with a large sun visor, excellent during sunny days or when the sun is low. The comfort inner lining is completely removable and washable.

The helmet shell is made of HIRP (High Impact Resistant Polymer), which ensures a high degree of safety and a limited weight. Very pleasant during long journeys. The outer shell is made in 2 different shells, to offer the smallest possible helmet for each size. The helmet is also equipped with Easy fit, which makes this helmet extremely suitable for eyeglass wearers.

Specifications:

• - 2 sizes of HIRP outer shell.
• - Excellent fit
• - Luxurious comfort inner lining, fully removable and washable.
• - Thick neck collar and chin guard, this makes the helmet fit more firmly and wind is reduced more, so the helmet is much quieter.
• - Completely renewed and improved air ventilation system.
• - Easy fit system, suitable to wear with glasses.
• - Clear anti-scratch visor with Max Vision Pinlock preparation.
• - Integrated sun visor, which be operated with one hand.
• - Micrometic chin strap quick release.
• - Bluetooth communication preparation.
• - Weight 1650 grams. (+/- 50 grams)
• - ECE-22.06 approved
• - Available in sizes S-M-L-XL-XXL

The MT Genesis is the latest update in the MT Helmets collection. The Genesis was designed with the sports and touring market in mind. Thanks to its many options, this helmet is your ideal travel partner for every ride. The motorcycle and scooter helmet is designed with the most modern and best techniques. All this to guarantee safety, protection and comfort during the entire ride. The helmet is equipped with the latest safety standards and meets the ECE-22.06 and DOT approval. This means that the helmet is permitted on public roads throughout Europe and the rest of the world as a motorcycle and scooter helmet. The helmet is equipped with a metal micrometic closure.

For optimal comfort, the helmet is equipped with ventilation on the front, top and back. The large anti-scratch visor provides a wide field of view for optimal safety. The visor has a Pinlock preparation to prevent the visor from fogging up while driving. The Pinlock lens can be ordered in the bundle. The helmet is equipped with a large sun visor, excellent during sunny days or when the sun is low. The comfort inner lining is completely removable and washable.

The helmet shell is made of HIRP (High Impact Resistant Polymer), which ensures a high degree of safety and a limited weight. Very pleasant during long journeys. The outer shell is made in 2 different shells, to offer the smallest possible helmet for each size. The helmet is also equipped with Easy fit, which makes this helmet extremely suitable for eyeglass wearers.

Specifications:

• - 2 sizes of HIRP outer shell.
• - Excellent fit
• - Luxurious comfort inner lining, fully removable and washable.
• - Thick neck collar and chin guard, this makes the helmet fit more firmly and wind is reduced more, so the helmet is much quieter.
• - Completely renewed and improved air ventilation system.
• - Easy fit system, suitable to wear with glasses.
• - Clear anti-scratch visor with Max Vision Pinlock preparation.
• - Integrated sun visor, which be operated with one hand.
• - Micrometic chin strap quick release.
• - Bluetooth communication preparation.
• - Weight 1650 grams. (+/- 50 grams)
• - ECE-22.06 approved
• - Available in sizes S-M-L-XL-XXL

The MT Genesis is the latest update in the MT Helmets collection. The Genesis was designed with the sports and touring market in mind. Thanks to its many options, this helmet is your ideal travel partner for every ride. The motorcycle and scooter helmet is designed with the most modern and best techniques. All this to guarantee safety, protection and comfort during the entire ride. The helmet is equipped with the latest safety standards and meets the ECE-22.06 and DOT approval. This means that the helmet is permitted on public roads throughout Europe and the rest of the world as a motorcycle and scooter helmet. The helmet is equipped with a metal micrometic closure.

For optimal comfort, the helmet is equipped with ventilation on the front, top and back. The large anti-scratch visor provides a wide field of view for optimal safety. The visor has a Pinlock preparation to prevent the visor from fogging up while driving. The Pinlock lens can be ordered in the bundle. The helmet is equipped with a large sun visor, excellent during sunny days or when the sun is low. The comfort inner lining is completely removable and washable.

The helmet shell is made of HIRP (High Impact Resistant Polymer), which ensures a high degree of safety and a limited weight. Very pleasant during long journeys. The outer shell is made in 2 different shells, to offer the smallest possible helmet for each size. The helmet is also equipped with Easy fit, which makes this helmet extremely suitable for eyeglass wearers.

Specifications:

• - 2 sizes of HIRP outer shell.
• - Excellent fit
• - Luxurious comfort inner lining, fully removable and washable.
• - Thick neck collar and chin guard, this makes the helmet fit more firmly and wind is reduced more, so the helmet is much quieter.
• - Completely renewed and improved air ventilation system.
• - Easy fit system, suitable to wear with glasses.
• - Clear anti-scratch visor with Max Vision Pinlock preparation.
• - Integrated sun visor, which be operated with one hand.
• - Micrometic chin strap quick release.
• - Bluetooth communication preparation.
• - Weight 1650 grams. (+/- 50 grams)
• - ECE-22.06 approved
• - Available in sizes S-M-L-XL-XXL

The MT Genesis is the latest update in the MT Helmets collection. The Genesis was designed with the sports and touring market in mind. Thanks to its many options, this helmet is your ideal travel partner for every ride. The motorcycle and scooter helmet is designed with the most modern and best techniques. All this to guarantee safety, protection and comfort during the entire ride. The helmet is equipped with the latest safety standards and meets the ECE-22.06 and DOT approval. This means that the helmet is permitted on public roads throughout Europe and the rest of the world as a motorcycle and scooter helmet. The helmet is equipped with a metal micrometic closure.

For optimal comfort, the helmet is equipped with ventilation on the front, top and back. The large anti-scratch visor provides a wide field of view for optimal safety. The visor has a Pinlock preparation to prevent the visor from fogging up while driving. The Pinlock lens can be ordered in the bundle. The helmet is equipped with a large sun visor, excellent during sunny days or when the sun is low. The comfort inner lining is completely removable and washable.

The helmet shell is made of HIRP (High Impact Resistant Polymer), which ensures a high degree of safety and a limited weight. Very pleasant during long journeys. The outer shell is made in 2 different shells, to offer the smallest possible helmet for each size. The helmet is also equipped with Easy fit, which makes this helmet extremely suitable for eyeglass wearers.

Specifications:

• - 2 sizes of HIRP outer shell.
• - Excellent fit
• - Luxurious comfort inner lining, fully removable and washable.
• - Thick neck collar and chin guard, this makes the helmet fit more firmly and wind is reduced more, so the helmet is much quieter.
• - Completely renewed and improved air ventilation system.
• - Easy fit system, suitable to wear with glasses.
• - Clear anti-scratch visor with Max Vision Pinlock preparation.
• - Integrated sun visor, which be operated with one hand.
• - Micrometic chin strap quick release.
• - Bluetooth communication preparation.
• - Weight 1650 grams. (+/- 50 grams)
• - ECE-22.06 approved
• - Available in sizes S-M-L-XL-XXL

MT presents the new R22.06 Streetfighter SV S

Features:

• Shell made of HIRP – High Impact Resistance Polymer, – a material that combines the best qualities with respect to the safety – weight ratio.
• Removable and washable inner padding.
• Micrometric locking with double teeth retention system for maximum security.
• Internal anti-scratch sunshade.
• System designed by MT for quick removal of the chin guard.
• Ventilation system with front and top inlets. Extraction system with rear outlets.
• Prepared for the incorporation of intercom loudspeaker system.
• Approximate weight 1,350g (+/- 50 g) (weight can vary significantly depending on size and shell).
• ECE R22.06 homologation and DOT marking.

MT presents the new R22.06 Streetfighter SV S

Features:

• Shell made of HIRP – High Impact Resistance Polymer, – a material that combines the best qualities with respect to the safety – weight ratio.
• Removable and washable inner padding.
• Micrometric locking with double teeth retention system for maximum security.
• Internal anti-scratch sunshade.
• System designed by MT for quick removal of the chin guard.
• Ventilation system with front and top inlets. Extraction system with rear outlets.
• Prepared for the incorporation of intercom loudspeaker system.
• Approximate weight 1,350g (+/- 50 g) (weight can vary significantly depending on size and shell).
• ECE R22.06 homologation and DOT marking.

MT presents the new R22.06 Streetfighter SV S

Features:

• Shell made of HIRP – High Impact Resistance Polymer, – a material that combines the best qualities with respect to the safety – weight ratio.
• Removable and washable inner padding.
• Micrometric locking with double teeth retention system for maximum security.
• Internal anti-scratch sunshade.
• System designed by MT for quick removal of the chin guard.
• Ventilation system with front and top inlets. Extraction system with rear outlets.
• Prepared for the incorporation of intercom loudspeaker system.
• Approximate weight 1,350g (+/- 50 g) (weight can vary significantly depending on size and shell).
• ECE R22.06 homologation and DOT marking.

MT presents the new R22.06 Streetfighter SV S

Features:

• Shell made of HIRP – High Impact Resistance Polymer, – a material that combines the best qualities with respect to the safety – weight ratio.
• Removable and washable inner padding.
• Micrometric locking with double teeth retention system for maximum security.
• Internal anti-scratch sunshade.
• System designed by MT for quick removal of the chin guard.
• Ventilation system with front and top inlets. Extraction system with rear outlets.
• Prepared for the incorporation of intercom loudspeaker system.
• Approximate weight 1,350g (+/- 50 g) (weight can vary significantly depending on size and shell).
• ECE R22.06 homologation and DOT marking.

MT presents the new R22.06 Streetfighter SV S

Features:

• Shell made of HIRP – High Impact Resistance Polymer, – a material that combines the best qualities with respect to the safety – weight ratio.
• Removable and washable inner padding.
• Micrometric locking with double teeth retention system for maximum security.
• Internal anti-scratch sunshade.
• System designed by MT for quick removal of the chin guard.
• Ventilation system with front and top inlets. Extraction system with rear outlets.
• Prepared for the incorporation of intercom loudspeaker system.
• Approximate weight 1,350g (+/- 50 g) (weight can vary significantly depending on size and shell).
• ECE R22.06 homologation and DOT marking.

MT presents the new R22.06 Streetfighter SV S

Features:

• Shell made of HIRP – High Impact Resistance Polymer, – a material that combines the best qualities with respect to the safety – weight ratio.
• Removable and washable inner padding.
• Micrometric locking with double teeth retention system for maximum security.
• Internal anti-scratch sunshade.
• System designed by MT for quick removal of the chin guard.
• Ventilation system with front and top inlets. Extraction system with rear outlets.
• Prepared for the incorporation of intercom loudspeaker system.
• Approximate weight 1,350g (+/- 50 g) (weight can vary significantly depending on size and shell).
• ECE R22.06 homologation and DOT marking.

The Streetfighter SV is a multi-purpose adventure/street helmet with a built-in sun visor and adjustable peak, and removable chin bar which allows you to convert the Streetfighter SV into the District SV open face helmet.

Boasting a shock-absorbing HIRP shell, the helmet is ideal for off-road riding. Air inlets located at the top of the helmet intake airflow that is extracted out the back to keep your head cool. The interior lining is fire retardant and fully removable to wash separately.

The helmet is secured with a metallic micrometric buckle, an internal drop-down sun-visor shields your eyes from glare, and is supplied with a clear visor as standard.

Features:

• High-impact resistant polymer shell
• Adjustable peak
• Detachable and machine washable interior foams
• Air inlets & extraction vents
• Micrometric metal closure 
• Integrated retractable smoke screen
• Possibility of removing the sun visor and the jaw protector
• ECE certified
• Helmet supplied with dark visor as fitted, and an extra mirror tint visor

The Streetfighter SV is a multi-purpose adventure/street helmet with a built-in sun visor and adjustable peak, and removable chin bar which allows you to convert the Streetfighter SV into the District SV open face helmet.

Boasting a shock-absorbing HIRP shell, the helmet is ideal for off-road riding. Air inlets located at the top of the helmet intake airflow that is extracted out the back to keep your head cool. The interior lining is fire retardant and fully removable to wash separately.

The helmet is secured with a metallic micrometric buckle, an internal drop-down sun-visor shields your eyes from glare, and is supplied with a clear visor as standard.

Features:

• High-impact resistant polymer shell
• Adjustable peak
• Detachable and machine washable interior foams
• Air inlets & extraction vents
• Micrometric metal closure 
• Integrated retractable smoke screen
• Possibility of removing the sun visor and the jaw protector
• ECE certified
• Helmet supplied with dark visor as fitted, and an extra mirror tint visor

Revolutionary safety accessible to all types of riders.
ECE 22.06. Security at the highest level.

The Viale SV is updated to raise its safety levels to the highest levels, exceeding the new European regulation ECE 22.06.
MT-MDTC | Micrometric double tooth closure

Micrometric closure with double tooth retention system to ensure maximum safety.
Durable visor

Made of high quality optical polycarbonate to offer the best possible clarity and high impact resistance.
Retractable sun visor

Sun visor with guide tab.
Removable and washable interior:

All the interiors of the Viale SV are made with hypoallergenic fabrics and are removable and washable.
HIRP shell

Shell made of HIRP -High Impact Resistance Polymer-, a material that brings together the best qualities in the safety-weight ratio.

MT-V-26 visor

2 shell sizes: XS-M, L-2XL.

Features:

• Aerodynamic Shape
• Air Intakes
• Fire Retardant Fabric Lining
• Multiple Internal Fabrics
• Anti Scratch Visor in Optical Polycarbonate
• Quick Release Visor
• Metallic Quick Release Micrometric Buckle
• Weight 900g
• MT-V-15 visor

Revolutionary safety accessible to all types of riders.
ECE 22.06. Security at the highest level.

The Viale SV is updated to raise its safety levels to the highest levels, exceeding the new European regulation ECE 22.06.
MT-MDTC | Micrometric double tooth closure

Micrometric closure with double tooth retention system to ensure maximum safety.
Durable visor

Made of high quality optical polycarbonate to offer the best possible clarity and high impact resistance.
Retractable sun visor

Sun visor with guide tab.
Removable and washable interior:

All the interiors of the Viale SV are made with hypoallergenic fabrics and are removable and washable.
HIRP shell

Shell made of HIRP -High Impact Resistance Polymer-, a material that brings together the best qualities in the safety-weight ratio.

MT-V-26 visor

2 shell sizes: XS-M, L-2XL.

Features:

• Aerodynamic Shape
• Air Intakes
• Fire Retardant Fabric Lining
• Multiple Internal Fabrics
• Anti Scratch Visor in Optical Polycarbonate
• Quick Release Visor
• Metallic Quick Release Micrometric Buckle
• Weight 900g
• MT-V-15 visor

Revolutionary safety accessible to all types of riders.
ECE 22.06. Security at the highest level.

The Viale SV is updated to raise its safety levels to the highest levels, exceeding the new European regulation ECE 22.06.
MT-MDTC | Micrometric double tooth closure

Micrometric closure with double tooth retention system to ensure maximum safety.
Durable visor

Made of high quality optical polycarbonate to offer the best possible clarity and high impact resistance.
Retractable sun visor

Sun visor with guide tab.
Removable and washable interior:

All the interiors of the Viale SV are made with hypoallergenic fabrics and are removable and washable.
HIRP shell

Shell made of HIRP -High Impact Resistance Polymer-, a material that brings together the best qualities in the safety-weight ratio.

MT-V-26 visor

2 shell sizes: XS-M, L-2XL.

Features:

• Aerodynamic Shape
• Air Intakes
• Fire Retardant Fabric Lining
• Multiple Internal Fabrics
• Anti Scratch Visor in Optical Polycarbonate
• Quick Release Visor
• Metallic Quick Release Micrometric Buckle
• Weight 900g
• MT-V-15 visor

Revolutionary safety accessible to all types of riders.
ECE 22.06. Security at the highest level.

The Viale SV is updated to raise its safety levels to the highest levels, exceeding the new European regulation ECE 22.06.
MT-MDTC | Micrometric double tooth closure

Micrometric closure with double tooth retention system to ensure maximum safety.
Durable visor

Made of high quality optical polycarbonate to offer the best possible clarity and high impact resistance.
Retractable sun visor

Sun visor with guide tab.
Removable and washable interior:

All the interiors of the Viale SV are made with hypoallergenic fabrics and are removable and washable.
HIRP shell

Shell made of HIRP -High Impact Resistance Polymer-, a material that brings together the best qualities in the safety-weight ratio.

MT-V-26 visor

2 shell sizes: XS-M, L-2XL.

Features:

• Aerodynamic Shape
• Air Intakes
• Fire Retardant Fabric Lining
• Multiple Internal Fabrics
• Anti Scratch Visor in Optical Polycarbonate
• Quick Release Visor
• Metallic Quick Release Micrometric Buckle
• Weight 900g
• MT-V-15 visor