Off Road

U1-9 battery is a part of our SLA range. Designed to make the user life easier, this 12V 28Ah battery is ready to use, 100% maintenance free and completely spill proof.

Extremely simple to install & carry, this U1-9 battery offers increased power, extended life and maximum reliability to all powersport & garden vehicles that require high performance.

Specifications:

• Technology: SLA
• Voltage (V): 12
• Capacity 20hr (Ah): 28
• CCA (A): 300
• Polartiy:
• Terminal:
• Dimensions (mm): 195 x 125 x 176

Features:

• Wet charged factory activated and ready to go
• Higher life cycle (up to three times longer than conventional batteries)
• Easy to install (no risk of spilling acid)
• Plate sulfation minimized
• AGM construction (absorbed acid)
• VRLA battery (Valve Regulated Lead Acid)
• Sealed, no gas emission through venting hole (under normal operation)
• Increased power and extended life
• Extreme vibration resistance

Find the correct fitment for your motorcycle here: BS Battery Fitment Guide

BTX14 battery is a part of our SLA range. Designed to make the user life easier, this 12V 12.6Ah battery is ready to use, 100% maintenance free and completely spill proof.

Extremely simple to install & carry, this BTX14 battery offers increased power, extended life and maximum reliability to all powersport vehicles that require high performance.

Cross Reference:

• Yuasa / Top Lite / Katana: YTX14-BS
• Motobatt: MBTX12U / MBYZ16H
• Powerroad: YG14-BS
• USPS: USX14-BS

Specifications:

• Technology: SLA
• Voltage (V): 12
• Capacity 10hr (Ah): 12
• Capacity 20hr (Ah): 12.6
• CCA (A): 200
• Polartiy:
• Terminal:
• Dimensions (mm): 150 x 87 x 145

Features:

• Wet charged factory activated and ready to go
• Higher life cycle (up to three times longer than conventional batteries)
• Easy to install (no risk of spilling acid)
• Plate sulfation minimized
• AGM construction (absorbed acid)
• VRLA battery (Valve Regulated Lead Acid)
• Sealed, no gas emission through venting hole (under normal operation)
• Increased power and extended life
• Extreme vibration resistance

Find the correct fitment for your motorcycle here: BS Battery Fitment Guide

The BT02 is a battery & alternator tester designed to save time on electrical issues, it gives a instant diagnosis.

With all the features inside an automatic, you cannot use it wrong.

FEATURES

• For 12V battery
• Test the condition of your battery and alternator
• Connect the crocodile clip to battery terminal and check alternator or battery
• Easy to use

INSTRUCTIONS

1. Connect the red crocodile clip to the positive (+) battery terminal
2. Connect the black crocodile clip to the negative (-) battery terminal

Battery Check

• Switch on the vehicle lights for 1-2 minutes
• Disconnect the battery from the vehicle
• Wait 10 minutes
• Connect the tester

Alternator Check

• Run the vehicle with all electrical equipment off (lights, radio...)
• Run the vehicle with all electrical equipment on (lights, radio...)
• The green LED should light on both tests meaning the alternator is GOOD
• A red LED indicates the alternator is over charging : must be controlled
• No LED light indicates the alternator may not be charging : must be controlled

Maxxis MU01 & MU02 Zilla. When you are looking for superb mud traction combined with outstanding riding characteristics, choose the Zilla front and rear tyres. Light and fast, the Maxxis 'Zilla ATV tyre delivers a relatively smooth ride even on rough terrain.

Features:

• Extremely lightweight design provides quicker acceleration and mudslinging traction with great braking power
• Nearly continuous center tread for smoother ride on trails
• Predictable high-speed performance
• Durable 6-ply rating

Keiti machined aluminium standard 'knurled' style valve caps. Inner o-rings prevent pressure leakage.

Sold in pairs.

Keiti machined aluminium standard 'knurled' style valve caps. Inner o-rings prevent pressure leakage.

Sold in pairs.

Keiti machined aluminium standard 'knurled' style valve caps. Inner o-rings prevent pressure leakage.

Sold in pairs.

Keiti machined aluminium standard 'knurled' style valve caps. Inner o-rings prevent pressure leakage.

Sold in pairs.

Dot 4 LV is a brake fluid engineered to operate exceptionally well at low temperatures (max. cSt @ -40°C). This allows this particular fluid to be well-suited to vehicles fitted with ESP/ASR (Electronic Stability Program) systems. Dot 4 LV is designed to be used in the hydraulic brake and clutch systems of cars, commercial vehicles, and motorcycles requiring a glycol-based Dot 3 or 4 brake fluid. It can be mixed with other glycol-based brake fluids without issue.

Typical dry boiling point – 266°C. Typical wet boiling point – 173°C.

The SunF A-033 All Terrain ATV tyre features a tried and tested pattern for dealing with almost any condition.

The design is very similar to the Maxxis Bighorn and features a 6 ply rating for extreme durability and resistance to puncture.
The tread pattern offers good clean out in mud conditions but also rides well on hard-pack and tarmac. Road Legal E marked makes this tyre a very affordable and versatile option.

The classic Zilla with extra tread for extra grip. 6-ply rated. Superb traction in the mud. Good sideways grip on hillsides. Overlapping centre blocks for a smooth ride on hard surfaces.

The Mitroc F950 is designed to provide dependable year-round performance, offering confident traction in wet conditions along with a smooth and stable driving experience.

An affordable option that delivers reliable everyday value.

From muddy paddocks to rough back-country tracks, the Mitroc M808 offroad tyre delivers the grip and toughness you need without breaking the bank.

Mitroc is a tyre that balances real-world performance with genuine value.

With over 30 years of proven performance across New Zealand's farms and trails, Mitroc is the brand riders trust.

Features:

• Suited to New Zealand Conditions: This tyre thrives in everything from the sodden winters of the Waikato to the dry, dusty summers of Hawke's Bay.
• Bold Knobby Tread Pattern: Engineered to bite into a wide range of terrain. From boggy paddock ground to loose rocky trails, keeping you planted and in control no matter what the land throws at you.
• Built to Last: Tough enough to handle the daily demands of farm life and off-road riding, the M808 is constructed to go the distance, ride after ride, season after season.
• Outstanding Value: Performance shouldn't come at a premium. The M808 gives budget-conscious riders a capable, dependable tyre that punches well above its price point.

From muddy paddocks to rough back-country tracks, the Mitroc M807 offroad tyre delivers the grip and toughness you need without breaking the bank.

Mitroc is a tyre that balances real-world performance with genuine value.

With over 30 years of proven performance across New Zealand's farms and trails, Mitroc is the brand riders trust.

Features:

• Suited to New Zealand Conditions: This tyre thrives in everything from the sodden winters of the Waikato to the dry, dusty summers of Hawke's Bay.
• Bold Knobby Tread Pattern: Engineered to bite into a wide range of terrain. From boggy paddock ground to loose rocky trails, keeping you planted and in control no matter what the land throws at you.
• Built to Last: Tough enough to handle the daily demands of farm life and off-road riding, the M807 is constructed to go the distance, ride after ride, season after season.
• Outstanding Value: Performance shouldn't come at a premium. The M807 gives budget-conscious riders a capable, dependable tyre that punches well above its price point.

From muddy paddocks to rough back-country tracks, the Mitroc M897 offroad tyre delivers the grip and toughness you need without breaking the bank.

Mitroc is a tyre that balances real-world performance with genuine value.

With over 30 years of proven performance across New Zealand's farms and trails, Mitroc is the brand riders trust.

Features:

• Suited to New Zealand Conditions: This tyre thrives in everything from the sodden winters of the Waikato to the dry, dusty summers of Hawke's Bay.
• Bold Knobby Tread Pattern: Engineered to bite into a wide range of terrain. From boggy paddock ground to loose rocky trails, keeping you planted and in control no matter what the land throws at you.
• Built to Last: Tough enough to handle the daily demands of farm life and off-road riding, the M897 is constructed to go the distance, ride after ride, season after season.
• Outstanding Value: Performance shouldn't come at a premium. The M897 gives budget-conscious riders a capable, dependable tyre that punches well above its price point.

From muddy paddocks to rough back-country tracks, the Mitroc M895 offroad tyre delivers the grip and toughness you need without breaking the bank.

Mitroc is a tyre that balances real-world performance with genuine value.

With over 30 years of proven performance across New Zealand's farms and trails, Mitroc is the brand riders trust.

Features:

• Suited to New Zealand Conditions: This tyre thrives in everything from the sodden winters of the Waikato to the dry, dusty summers of Hawke's Bay.
• Bold Knobby Tread Pattern: Engineered to bite into a wide range of terrain. From boggy paddock ground to loose rocky trails, keeping you planted and in control no matter what the land throws at you.
• Built to Last: Tough enough to handle the daily demands of farm life and off-road riding, the M895 is constructed to go the distance, ride after ride, season after season.
• Outstanding Value: Performance shouldn't come at a premium. The M895 gives budget-conscious riders a capable, dependable tyre that punches well above its price point.

FOR PROFESSIONAL TRAINING AND AMATEUR TO SEMI-PRO RACERS

The Pirelli Scorpion MX Tires are the optimal choice for professional training and amateur to semi-pro racers who ride all types of terrain and demand performance lap after lap especially under “race simulation”. The front knobs have an arrow-like layout and the side knobs are for directional accuracy and straightaway visibility. The v-shaped knobs also improve braking stability and cornering side hold. The rear knobs offer maximum traction on all terrain applications. The surface area and compound’s carbon black structure for balance between stiffness, reliability and long lasting performance.

Features:

• Front blocks: arrow-like layout and side blocks for directional accuracy and straightaway visibility; V-shaped blocks improve braking stability and cornering side hold
• Rear blocks: maximum traction on all terrain applications.Surface area and compound’s carbon black structure for balance between stiffness, reliability and lasting performance
• Grip and traction on a wide range of terrain (from mid soft to mid hard)
• Perfect application for training; optimal compromise between performance and durability
• Multi-ply carcass with high resistance to punctures but maximum flexibility to absorb forces during jumps or obstacles
• Training performance in all terrain conditions with uniform block wear, resistance to deformation while damping and thus an extended durability

EBC DOT 5 silicone brake fluid is a very high specification fluid based on polydimethylsiloxanes (silicones) and offers many advantages over conventional glycol based fluids. Silicone fluid does not absorb water from the surrounding atmosphere while in service and therefore offers greatly extended service life whilst improving corrosion resistance of the main components of the braking system.

Recommended for use in the hydraulic brake and clutch systems of all motorcycles and cars for which non-petroleum based fluid is specified. Particularly recommended for classic cars or vehicles that are garaged for much of their life but must be usable at short notice.

This fluid must only ever be mixed with DOT 5 fluid which has the same silicone base. Never mix DOT 5 with regular glycol based fluids.

Typical dry boiling point – 300°C (572°F). Typical wet boiling point – 180°C (356°F)

EBC DOT 4 brake fluid is a high quality brake fluid recommended for use in the hydraulic brake and clutch systems of all motorcycles and cars for which a glycol based DOT 3 or DOT 4 fluid is specified. With a higher boiling point than DOT 3 fluid, this fluid is ideally suited for higher performance vehicles where the braking system routinely reaches moderate brake temperatures.

Typical dry boiling point – 270°C (518°F). Typical wet boiling point – 170°C (338°F)

NOT SUITABLE FOR USE WITH MINERAL OIL SYSTEMS. If in doubt consult vehicle handbook.

Our BF307+ high performance Super DOT 4 brake fluid has been specially formulated to provide outstanding performance for braking systems routinely operated at extreme temperatures making this fluid ideal for fast street use, track days and racing. Do not mix BF307+ brake fluid with other brake fluids or its high performance may be compromised.

Typical dry boiling point – 310°C (590°F). Typical wet boiling point – 204°C (399°F)

NOT SUITABLE FOR USE WITH MINERAL OIL SYSTEMS. If in doubt consult vehicle handbook.

PLEASE NOTE: These batteries ship without acid. If purchasing, you will need to add your own acid to the battery to activate it. This may not be suitable for all customers so please choose carefully.

Simple and efficient, Toplite’s line of 12 volt conventional batteries carry the unparalleled quality of any battery bearing the Toplite by Yuasa name.

Features:

• Special thin separators which provide high cranking power

• Engineered to protect against corrosion, withstand vibration, and deliver high cranking power

Find the correct fitment for your motorcycle here: Toplite-Yuasa Fitment Guide

Toplite’s elite performer, the AGM series, has more cranking amps and higher amp hour capacity for years of trustworthy service. Absorbed Glass Mat (AGM) batteries look different from typical powersports battery types because they are built differently. This advanced battery design eliminates water loss. Once these batteries are filled with acid, you’ll never need to fill it with water or check the acid level. This specific line is optimized to run strong without maintenance. Essentially this is the ultimate “set it and forget it” battery.

YT Series Battery Features:

• Premium absorbed glass mat (AGM) technology
• Sealed, non-spillable design
• Meets or exceeds OEM specs
• Maintenance free – NEVER add water, but periodic charging required when not in use
• Engineered to protect against corrosion, withstand vibration, and deliver high cranking power
• Polypropylene cover and container – superior resistance in extreme conditions of cold and heat, more flexible than ABS material

YTX Series Battery Features:

• Improved CCA over YT Series
• Premium absorbed glass mat (AGM) technology
• Sealed, non-spillable design
• Meets or exceeds OEM specs
• Maintenance free – NEVER add water, but periodic charging required when not in use
• Engineered to protect against corrosion, withstand vibration, and deliver high cranking power
• Polypropylene cover and container – superior resistance in extreme conditions of cold and heat, more flexible than ABS material

Find the correct fitment for your motorcycle here: Toplite-Yuasa Fitment Guide

PLEASE NOTE: This battery ships without acid. If purchasing, you will need to add your own acid to this battery to activate it. This may not be suitable for all customers so please choose carefully.

Simple and efficient, Toplite’s line of 12 volt 'YuMicron' high performance conventional batteries carry the unparalleled quality of any battery bearing the Toplite by Yuasa name.

Features:

• Heat sealed case protects against seepage and corrosion

• Special thin separators provides high cranking power

• Heavy-duty glass mat resists shredding of active material even under severe vibration

Find the correct fitment for your motorcycle here: Toplite-Yuasa Fitment Guide

PLEASE NOTE: Some of these batteries ship without acid. If purchasing one of these, you will need to add your own acid to the battery to activate it. This may not be suitable for all customers so please choose carefully.

Toplite’s elite performer, the AGM series, has more cranking amps and higher amp hour capacity for years of trustworthy service. Absorbed Glass Mat (AGM) batteries look different from typical powersports battery types because they are built differently. This advanced battery design eliminates water loss. Once these batteries are filled with acid, you’ll never need to fill it with water or check the acid level. This specific line is optimized to run strong without maintenance. Essentially this is the ultimate “set it and forget it” battery.

YTX(H) Series Battery Features:

• H Series – increased power, up to 30% more CCA over YTX Series
• Premium absorbed glass mat (AGM) technology
• Sealed, non-spillable design
• Meets or exceeds OEM specs
• Maintenance free – NEVER add water, but periodic charging required when not in use
• Engineered to protect against corrosion, withstand vibration, and deliver high cranking power
• Polypropylene cover and container – superior resistance in extreme conditions of cold and heat, more flexible than ABS material

TTZ Series Battery Features:

• Ideal for sport bike applications
• High CCA in a compact size
• Lightweight design
• Enhanced capacity recovery
• Expanded grid design for superior reliability
• Premium absorbed glass mat (AGM) technology
• Sealed, non-spillable design
• Meets or exceeds OEM specs
• Maintenance free – NEVER add water, but periodic charging required when not in use
• Engineered to protect against corrosion, withstand vibration, and deliver high cranking power
• Polypropylene cover and container – superior resistance in extreme conditions of cold and heat, more flexible than ABS material

Find the correct fitment for your motorcycle here: Toplite-Yuasa Fitment Guide

PLEASE NOTE: These batteries ship without acid. If purchasing, you will need to add your own acid to the battery to activate it. This may not be suitable for all customers so please choose carefully.

Simple and efficient, Toplite’s line of 6 volt conventional batteries carry the unparalleled quality of any battery bearing the Toplite by Yuasa name.

Features:

• Special thin separators which provide high cranking power

• Engineered to protect against corrosion, withstand vibration, and deliver high cranking power

Find the correct fitment for your motorcycle here: Toplite-Yuasa Fitment Guide

Wild Thang
Intermediate / Mud / Soft    

The Wild Thang by CST is the ultimate full-featured mud tire. A fanged tread pattern extends over its shoulder for extra cornering grip, allowing you to dig deeper and claw out of muddy, slick conditions. A lightweight 6-ply rated, bias-ply construction allows for exceptional acceleration and breaking power. Make your ATV or Side-by-Side wild with the Wild Thang.

• Fanged tread design for insane cornering in sloppy conditions
• Lightweight bias-ply construction for exceptional acceleration and braking
• Designed for comfortable on intermediate to loose-over-hardpacked conditions

Keiti machined aluminium standard 'knurled' style valve caps. Inner o-rings prevent pressure leakage.

Sold in pairs.

Keiti machined aluminium standard 'knurled' style valve caps. Inner o-rings prevent pressure leakage.

Sold in pairs.

Keiti machined aluminium standard 'knurled' style valve caps. Inner o-rings prevent pressure leakage.

Sold in pairs.

Keiti machined aluminium 'Piston' style valve caps. Inner o-rings prevent pressure leakage.

Sold in pairs.

Keiti machined aluminium 'Piston' style valve caps. Inner o-rings prevent pressure leakage.

Sold in pairs.

Keiti Tyre Pens give you a way to add colour to your tyres, reviving and personalizing your bike. Bring your tyres back to life!

Keiti Motorcycle Bar Ends, supplied as a set of 2. Suitable for steel and alloy handle bars with a diameter between 14mm - 18mm.

Keiti Motorcycle Bar Ends, supplied as a set of 2. Suitable for steel and alloy handle bars with a diameter between 14mm - 18mm.

Effective in all conditions of use: competition, training or just for fun! Excellent traction and self-cleaning properties enable top speeds right from the start of the competition. Specific carcass capable of maintaining effective and reliable performance on soft surfaces throughout the entire competition. Rear tyre blocks with blade layout for the maximum traction also on mud and sand. The tread pattern and compound were developed with the contribution of the most prestigious players in MX competitions.

Features:

• Redesigned reinforced edge blocks with reinforced center paddle has improved drive, edge traction and increased longevity in soft conditions
• Excellent traction and self-cleaning properties enable top speeds right from the start of the competition
• Specific carcass capable of maintaining effective and reliable performance on soft surfaces throughout the entire competition
• Rear tyre blocks with blade layout for the maximum traction also on mud and sand
• The tread pattern and compound were developed with the contribution of riders competing in MXGP competitions

THE CHOICE OF CHAMPIONS, FOR MEDIUM TO HARD TERRAIN SURFACES

Boasting larger block sizes, or “knobs”, the MX32 Mid Hard increases the tread contact area and improves durability on both Mid Soft and Mid Hard soil types. Large void area between the tread pitches assures good self-cleaning. Modified side knobs feature “dimples” to optimize lean angle grip and stability for maximum traction and control in turns. Casing depressions, including the iconic Scorpion mark, increase plant and ride comfort, while the tread spacing and crown radius profile broaden the range usage.

Features:

• Tread pattern born to offer the best performances on mid-hard surfaces with an excellent traction even on increasingly severe terrain conditions during the race
• A totally new rear tread pattern advances the Mid Hard’s performances; each block contributing to an improved traction and power transmission
• Optimal resiliency for consistent performance over time
• Dedicated compound for outstanding grip in lateral sliding control
• Block links (or “bridges”) layout for tear resistance
• Tread pattern and compounds proven with the most prestigious competitors in MX World Championship

Maxxis MU51 & MU52. Designed as original equipment for select Polaris Ranger models, the MU51/MU52 are ready to work. Featuring a generous contact patch and a robust, 6 ply-rated carcass, the MU51 front and the even wider MU52 rear ensure that you can haul heavy loads with ease. With a tread pattern similar to the Ceros, the MU51/MU52 also offers excellent traction and tread wear. Tall blocks and large void areas clear mud easily, so rainy, muddy weather is no problem for the MU51/MU52.

Features:

• Superior traction
• Durable, with sustained tread wear
• 6-Ply-Rated construction

SunF A048 Warrior ATV utility tyres.

Features:

• 6 Ply Rated
• Extended-wear rubber compound for even longer life and better value
• Tread design with deep knobs delivers extraordinary traction for enhanced performance
• Aggressive shoulder knobs provide excellent side bite and grip
• Puncture resistant

Maxxis MU09 & MU10 Bighorn 2.0. Based on the legendary Bighorn, the Maxxis Bighorn 2.0 is a lightweight version that mimics the tread design of the original, with slimmer lugs. Radial construction provides better shock absorption, allowing for a smoother ride. The non-directional pattern provides predictable cornering and claws over roots and rocks for optimum climbing confidence. The Bighorn 2.0 boasts a 6-ply rating, offering the durability that you've grown to expect from Bighorn tyres.

Features:

• Radial construction offers a significantly smoother ride over rough trails
• Tire suitable for hard-pack, intermediate, soft terrain & sand applications
• Durable 6-ply rating construction

MAXXIS MU15 & MU16 Vipr. The Vipr is perfect for any loose to intermediate conditions and is capable of performing under the heaviest of loads.

Features:

• The Maxxis Vipr is constructed specifically for side-by- sides and UTVs
• A directional tread pattern with deep lugs excels in loose to intermediate terrains, able to shed mud but also roll smoothly on hard pack
• Radial construction provides a plush feel and a large contact patch for the ultimate ride through the desert or on muddy trails
• Features 6-ply rated construction and a rim guard

Maxxis MU01 & MU02 Zilla. When you are looking for superb mud traction combined with outstanding riding characteristics, choose the Zilla front and rear tyres. Light and fast, the Maxxis 'Zilla ATV tyre delivers a relatively smooth ride even on rough terrain.

Features:

• Extremely lightweight design provides quicker acceleration and mudslinging traction with great braking power
• Nearly continuous center tread for smoother ride on trails
• Predictable high-speed performance
• Durable 6-ply rating

The SunF A-011

• 6 Ply Rated
• Tread pattern offers traction from loose terrain to hardpack
• Aggressive tread pattern for enhanced cornering ability
• Extended-wear rubber compound for even longer life and better value
• Excellent cornering traction with minimal slip

Keiti Motorcycle Bar Ends, supplied as a set of 2. Suitable for steel and alloy handle bars with a diameter between 14mm - 18mm.

Aggressive Utility footprint that excels in wet and muddy conditions.

Featuring our rubber construction which provides extra over most OEM tyres without being too aggressive for use around the farm or for a day on the trail.

CROSS COUNTRY TYRE FOR SOFT TO MEDIUM SURFACES

The Pirelli Scorpion XC tyres are constructed with a polyester carcass for a durable and light weight construction. Designed with an aggressive tread pattern on the front tyre for optimized steering and on the rear tyre for superior traction. 

Features:

• Performance tyre with excellent durability
• Directional front design offers maximum braking performance
• Mid-shoulder lugs for better traction in softer terrain
• Offers maximum steering precision, especially on softer terrain
• Rear provides superior straight-line traction on a wide range of terrain
• Excellent durability, with long knob life
• XC MS 18" rear features a similar tread pattern
• 80/100-21 front tyre is DOT approved, all rear options in Soft-Intermediate are not DOT approved

CROSS COUNTRY TYRE FOR INTERMEDIATE TO HARD SURFACES

Features:

• Specifically for use on enduro motorcycles in professional cross-country configurations
• Excellent for routes with jumps, in the mud, through vegetation or at least on usually inaccessible routes
• Specific off road compound to ensure constant cross-country performance
• Carcass and pattern evolved from motocross experience made available to cross country adventure riding
• A Heavy Duty street legal product

Keiti Tyre Pens give you a way to add colour to your tyres, reviving and personalizing your bike. Bring your tyres back to life!

MX-PRO series
This high quality NON-sealed chain has been manufactured specifically for professional MX usage. The MX-Pro features eliminates kinking and seizure in abrasive and muddy conditions by applying chromized pins and riveted bushings. The MX-Pro chain distinguishes itself by its gold coloured link plates.

MX Alpha XRG series
This premium chain has proven itself by its performance according to the appraisal of many professional MX-racing teams. Smooth running with a minimum of power loss combined with the benefits of sealed-off inside lubrication which gives a longer chain lifespan. The gold coloured plating of the outer links provide some corrosion protection next to an attractive appearance.

MX Omega series
The MX Omega offers you an affordable sealed O-Ring chain. MX-Omega chain offers you good value for money.

MX series
An economical quality roller chain (solid rollers) which is suitable for semi-professional applications.
The press-fit, quad-stake riveted pins add additional strength to this chain.

EPFA Extreme Pro Sintered Brake Pads by EBC for trackday and fast road riding. With all the attributes of the Double-H range the EPFA Extreme Pro brake pads feature extra ingredients and vacuum furnace technology that enhances friction levels, stability and feel. Suitable for 'ride to - ride away' trackday type use. These pads are also TÜV tested and ECE R 90 approved. Another benefit is the totally silent braking ability.

Features:

• Superbike, street and trackday pad
• TÜV and ECE R 90 approved
• Ultra high brake effect and lifetime
• Perfect braking wet or dry
• Expertly crafted from the highest grade materials
• Will deliver years of reliable service
• Made to withstand the harshest conditions

Find the correct fitment for your motorcycle here: EBC Brakes Fitment Guide

Keiti machined aluminium standard 'knurled' style valve caps. Inner o-rings prevent pressure leakage.

Sold in pairs.

THE MOST WINNING TYRE IN THE MOTOCROSS WORLD CHAMPIONSHIP, FOR SOFT TO MEDIUM TERRAIN SURFACES

The Pirelli Scorpion MX32 Mid Soft features a front tyre with directional arrow layout blocks which optimise contact with the ground at all times and offer maximum traction and precision in cornering. To compliment the front tyre, the rear also features a “V” layout of blocks to provide maximum power to the ground in all situations, along with improved stability in traction and on braking.

Using a double-layer compound construction, the Pirelli Scorpion MX32 Mid Soft features maximum resistance to heat and dynamic stresses. This improved the reliability of performance lap after lap during long motos throughout the day. The unique MX32 Mid Soft tread pattern and compound were developed with the contribution of the most prestigious players in the Motocross industry

Features:

• Tread pattern born to offer the best performances on mid-hard surfaces with an excellent traction even on increasingly severe terrain conditions during the race
• A totally new rear tread pattern advances the Mid Hard’s performances; each block contributing to an improved traction and power transmission
• Optimal resiliency for consistent performance over time
• Dedicated compound for outstanding grip in lateral sliding control
• Block links (or “bridges”) layout for tear resistance
• Tread pattern and compounds proven with the most prestigious competitors in MX World Championship

Front Circular profile

• Front or Rear fitments.
• New Lightweight construction.
• Radical new profile.
• Heat treated carbon steel.
• Gold zinc anodised.

Front Contoured profile

Now available for most popular Moto-X machines, EBC’s new Supercross Contour discs have proved not only to provide a trick looking brake setup, but also deliver great and improved brake feel over conventional solid discs, according to many moto-x riders.

• Extra weight reduction reducing unsprung weight.
• Super trick looking contoured profile.
• Made from heat treated carbon steel with higher friction than stainless steel equals more stopping power.
• Lustre finish gold anodised to prevent corrosion.

EBC Heavy Duty Heat Treated MX Rear & ATV Front and Rear Brake Discs

• Strong heavy duty design.
• Heat treated carbon steel.
• Gold zinc anodised.
 

Find the correct fitment for your scooter or motorcycle here: EBC Brakes Fitment Guide

Indent Orders available for items not in stock or not listed.
(Air freight indents are 2 - 6 weeks delivery subject to availability)

Upgrade your stopping power with the latest EBC oversize supermoto rotor kits. Using your standard caliper, the bracket provided repositions the caliper at a larger radius to enhance braking power and feel over standard rotor size. The easy to install kit takes minutes to fit and gives a significant brake improvement.
 

Motocross:

280mm oversize design or 250mm oversize design for 80/85cc MX Bikes.

• Fully floating construction.
• Heat treated carbon steel.
• Complete with brackets.
• Front applications only.

Supermoto:

320mm oversize Supermoto disc constructed with forged alloy centre hub for weight reduction and tough billet steel 4mm thickness brake rotor for maximum stopping power. The rotor rings include OD cooling groove and extra weight reducing scraper holes and are riveted together with a nine button sturdy rivet system.

The rotor kit comes complete with anodised alloy relocation brackets for most popular MX/enduro bikes and are supplied as a kit with the complete rotor unit and anodised bracket. The brake hose may need to be replaced with a longer version.
 

Find the correct fitment for your scooter or motorcycle here: EBC Brakes Fitment Guide

Indent Orders available for items not in stock or not listed.
(Air freight indents are 2 - 6 weeks delivery subject to availability)

R Series Heavy Duty Sintered Brake Pads by EBC. This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship. Manufactured from industry-leading materials using up-to-date equipment, it ensures everlasting reliability and enduring value. This product is distinguished by total quality assurance, unsurpassed by anybody else.

Features:

• Highest durability ATV grade
• Target user is Off-Road ATV rider in mud, wet, sand or dust riding
• Made in the EBC Brakes USA factory
• Expertly crafted from the highest grade materials
• Will deliver years of reliable service
• Made to withstand the harshest conditions

Find the correct fitment for your motorcycle here: EBC Brakes Fitment Guide

The cool running EBC Carbon TT brake pads are designed for use in motocross, enduro and ATV applications. While the life cycle is not as good as a sintered copper pad, Carbon TT brake pads generate less heat which is a major benefit in fast, dry conditions when riding off road. The EBC Carbon TT compound prevents the transfer of heat to the hydraulics. The backing plate of these pads are painted a distinctive red.  

Please be aware that when used on rear rotors, particularly in ATV use, wear life of these pads may be less than the sintered pads that are installed as OE. This pad has ECE R90 type approval for many off road bikes in Europe indicating it is safe for road use due to its effectiveness when hot.

Find the correct fitment for your motorcycle here: EBC Brakes Fitment Guide

The new SXR side-by-side range of race formula sintered copper alloy brake pads is the latest EBC performance offering for the SxS market and delivers unparalleled braking and wear.

Features:

• Made in the EBC plant in Ohio USA
• Ultra-high friction fade-resistant compound
• Superb heat cycling ability, pads perform consistently race after race
• Built on hard steel EN series backplate steels to resist warping and brinelling of surfaces under heavy loads.
• Long-lasting in mud and dust/dirt riding
• Diamond ground surface finishes for ultra-fast bed in.
• Not R90 street legal or TÜV tested (a requirement for European markets only)

Find the correct fitment for your motorcycle here: EBC Brakes Fitment Guide

The C755 is designed to perform on intermediate to severe terrain conditions.

The aggressive knobs were engineered and arranged to reduce tread wear and to maximize traction on a wide range conditions.

Features:

• Excellent for intermediate to hard terrain
• Aggressive knob design for superior traction
• Compact knob spacing for general off-road and hard track use
• Asymmetric knob pattern for maximum rubber contact
• Available in 4 and 6 ply rating
• Top choice for NZ Farmers
• Crafted with a focus on affordability without compromising performance. The perfect tyre choice for budget-conscious riders seeking dependable quality and performance

Cheng Shin C828. Whether you use your ATV for a work horse, or for horsin' around, there is a tough Cheng Shin tyre to handle your challenge. Every model features a specially formulated rubber compound for maximum performance and dependability. They have a tough nylon carcuss to provide durability, and help minimize punctures.

Features:

• Aggressive Chevron style lugs offer excellent traction
• Largest array of styles available on any CST ATV tyre
• One extremely tough tyre

Maxxis C9208 Sur Trak.

Features:

• Multi directional tread design delivers traction in mud, snow and sand. 
• Outside shoulder lugs provide aggressive side bite
• Race proven in the Grand National Cross Country series

DESIGNED FOR TRIAL BIKES AND SUITABLE FOR ROAD USE

Features:

• Reinforced carcass to provide high resistance combined with a long life
• Specific construction capable of reducing deformation during use ensuring the maximum contact area in all road surface conditions
• High performance on hard, dry and damp surfaces, plus excellent for indoor competition use

3M VHB™ adhesive.
Compatible with Optiline mounts and Mag holders.

Compatible with all Optiline Titan mounts and 19 mm balls (mount not included)

15W max. Type C input. Re-usable adhesive base to keep the mount always in position. Adjustable viewing angle.
Compatibility: universal, applying the metal disc to the outside of the case; iPhones with MagSafe technology (12th edition onwards) and cases with MagSafe ; MagCase Optiline line.
15 magnets designed to hold the phone securely in place without interfering with its functionality. Fast charging requires an adaptive USB-C charger with at least 18W of power.
150 cm USB C to Type C cable included in the package.
USB charger not included