Size NS

Simple and efficient, Toplite’s line of 6 volt conventional batteries carry the unparalleled quality of any battery bearing the Toplite by Yuasa name.

Features:

• Special thin separators which provide high cranking power

• Engineered to protect against corrosion, withstand vibration, and deliver high cranking power

Find the correct fitment for your motorcycle here: Toplite-Yuasa Fitment Guide

Replacement peak for the AGV AX-8 DUAL EVO.

Replacement peak for the AGV AX-9.

Replacement peak for the AGV AX9.

AGV AX9 scratch resistant, Pinlock ready visor.

Features:

• 100% Polycarbonate
• 110° vertical field of view
• 190° horizontal field of view
• Anti-scratch
• High impact protection (up to 3mm thick)
• Max Pinlock not included
• Max Pinlock ready
• UV protective

The Pinlock 70 fog resistant insert lens is our premium solution for AGV helmets. This lens has become the benchmark for fog resistant performance that is most commonly used by riders across the world. The insert is made of a moisture absorbing plastic and, therefore the surface basically dry when used. The insert has a silicone seal that creates a double shield system.

Compatible with: AGV K1, K3 SV, K5 and K5 S helmets that use a GT2 Visor. (Does not fit 2024 and newer K3 models)

The 100% Max Vision Pinlock 120 fog resistant insert lens is our premium solution for AGV helmets. This lens has become the benchmark for fog resistant performance that is most commonly used by riders across the world. The insert is made of a moisture absorbing plastic and, therefore the surface basically dry when used. The insert has a silicone seal that creates a double shield system.

Compatible with: AGV Sport Modular helmets that use a GT3 Visor.

The Pinlock 70 fog resistant insert lens is our premium solution for AGV helmets. This lens has become the benchmark for fog resistant performance that is most commonly used by riders across the world. The insert is made of a moisture absorbing plastic and, therefore the surface basically dry when used. The insert has a silicone seal that creates a double shield system.

Compatible with: AGV K1 S, K3 SV, K5 and K5 S helmets that use a GT4 Visor, as well as AGV Streetmodular helmets that use a GT7 visor. (Does not fit 2024 and newer K3 models)

AGV INSYDE BOOM MICROPHONE (20KIT93041001)

Integrated intercom communication system for AGV K7 with Cardo DMC™ Mesh Technology. Connects up to 15 intercoms simultaneously, with range of up to 6 km.

AGV INSYDE is the first system to feature DMC™ Dynamic Mesh Communication technology integrated with a modular helmet. The most advanced motorcycle intercom ever produced, developed exclusively by Cardo, meets AGV K7, the ultra-protective helmet for taking on endless journeys. DMC™ technology allows superior audio quality and connection stability for communication between riders, in all conditions. Just set it with a click, and AGV INSYDE will do the rest, establishing a stable connection between up to 15 riders, 1.2 km apart, with a total range of up to 6 km.

It’s fully compatible with any other Bluetooth device. DMC™ technology enables continuous, uninterrupted communication. Unlike intercoms with Bluetooth technology alone, when one or more riders join or leave the conversation, the chain of communication continues in a linear way without ever being interrupted. It also offers endless possibilities. AGV INSYDE lets you receive calls, include them in the communication with other riders connected via intercom, listen to music from any device with Bluetooth connection and share it with your passenger and listen to FM radio with RDS system and automatic selection of the most stable signal. All this can be managed simply and intuitively by hand with a single touch, or directly with voice commands through the sophisticated Natural Voice technology.

AGV INSYDE manages all audio signal sources (Intercom, music, calls, FM radio) through a sophisticated algorithm that allows them to be received independently in parallel, for an experience characterized by maximum continuity. Entering and leaving conversations, listening to music and communicating with other riders occurs automatically and directly, without any kind of interruption or the need to disconnect and reconnect to the group. There are no distractions, just continuous communication.

The automatic volume control system also ensures superior audio quality, automatically adjusting the level according to external sounds and ambient noise, always maintaining the same level of clarity for the rider. The long-lasting battery provides up to 13 hours of continuous call time. But that’s not all. You can also use AGV INSYDE while it’s charging. This lets you ride with the system plugged into a power bank or 12V outlet, guaranteeing charging even when you’re on the move. Communication never stops.

AGV INSYDE, developed with Cardo and compatible with full integration with the AGV K7 helmet, is IP65 certified and has a smartphone interface app, compatible with iOS and Android operating systems.

40mm HD speakers

ISV scratch resistant internal sunvisor. Compatible with: K5 S, K3 SV.

Replacement wind protector/chin piece for the AGV K6 S / K6 helmet.

A helmet bag with the classic AGV Logo.

Can also be used as a tote bag for motorcycle accessories (no dividers inside)

Features:

• The design and details of the helmet bag actually used by Giacomo Agostini are faithfuly reproduced.
• Soft brushed interior material

Wind Protector chin piece for the AGV Pista GP RR.

Replacement for the Pista GP RR or Pista GP R Pro Spoiler. Colour: Clear. Plastic screws included.

The 100% Max Vision Pinlock 120 fog resistant insert lens is our premium solution for AGV helmets. This lens has become the benchmark for fog resistant performance that is most commonly used by riders across the world. The insert is made of a moisture absorbing plastic and, therefore the surface basically dry when used. The insert has a silicone seal that creates a double shield system.

Compatible with: AGV Pista GP RR, Pista GP R and Corsa R helmets that use a Race 3 Visor.

AGV Race 3 scratch resistant, Max Pinlock ready visor. Compatible with: Pista GP RR, Pista GP R and Corsa R. Tear-off system ready.

Features:

• 190° horizontal field of view
• 5mm thickness
• 85° vertical field of view
• Anti-scratch
• Max Pinlock ready
• Night use allowed
• Optic class 1
• Tear-off ready
• UV protective

AGV Race 3 scratch resistant, Max Pinlock ready visor. Compatible with: Pista GP RR, Pista GP R and Corsa R. Tear-off system ready.

Features:

• 190° horizontal field of view
• 5mm thickness
• 85° vertical field of view
• Anti-scratch
• Max Pinlock ready
• Optic class 1
• Tear-off ready
• UV protective

AGV Race 3 scratch resistant, Max Pinlock ready visor. Compatible with: Pista GP RR, Pista GP R and Corsa R. Tear-off system ready.

Features:

• 190° horizontal field of view
• 5mm thickness
• 85° vertical field of view
• Anti-scratch
• Max Pinlock ready
• Night use allowed
• Optic class 1
• Tear-off ready
• UV protective

AGV Race 3 scratch resistant, Max Pinlock ready visor. Compatible with: Pista GP RR, Pista GP R and Corsa R. Tear-off system ready.

Features:

• 190° horizontal field of view
• 5mm thickness
• 85° vertical field of view
• Anti-scratch
• Max Pinlock ready
• Night use allowed
• Optic class 1
• Tear-off ready
• UV protective

AGV Race 3 scratch resistant, Max Pinlock ready visor. Compatible with: Pista GP RR, Pista GP R and Corsa R. Tear-off system ready.

Features:

• 190° horizontal field of view
• 5mm thickness
• 85° vertical field of view
• Anti-scratch
• Max Pinlock ready
• Night use allowed
• Optic class 1
• Tear-off ready
• UV protective

AGV Race 3 scratch resistant, Max Pinlock ready visor. Compatible with: Pista GP RR, Pista GP R and Corsa R. Tear-off system ready.

Features:

• 190° horizontal field of view
• 5mm thickness
• 85° vertical field of view
• Anti-scratch
• Max Pinlock ready
• Night use allowed
• Optic class 1
• Tear-off ready
• UV protective

AGV Race 3 scratch resistant, Max Pinlock ready visor. Compatible with: Pista GP RR, Pista GP R and Corsa R. Tear-off system ready.

Features:

• 190° horizontal field of view
• 5mm thickness
• 85° vertical field of view
• Anti-scratch
• Max Pinlock ready
• Night use allowed
• Optic class 1
• Tear-off ready
• UV protective

AGV Race Visor for the AGV Ti-Tech Helmet, tear-off ready.

K6 S scratch resistant, Max Pinlock ready visor. Compatible with: AGV K6 S helmets.

Features:

• 100% polycarbonate
• 190° horizontal field of view
• 4mm thickness
• 85° vertical field of view
• Anti-scratch
• Max Pinlock not included
• Max Pinlock ready
• Optic class 1
• UV protective

The 100% Max Vision Pinlock 120 fog resistant insert lens is our premium solution for AGV helmets. This lens has become the benchmark for fog resistant performance that is most commonly used by riders across the world. The insert is made of a moisture absorbing plastic and, therefore the surface basically dry when used. The insert has a silicone seal that creates a double shield system.

Compatible with: AGV K6 helmets that use a SP1 Visor.

SP1 scratch resistant, Max Pinlock ready visor. Compatible with: AGV K6 helmets.

Features:

• 100% polycarbonate
• 190° horizontal field of view
• 4mm thickness
• 85° vertical field of view
• Anti-scratch
• Max Pinlock not included
• Max Pinlock ready
• Optic class 1
• UV protective

SP1 scratch resistant, Max Pinlock ready visor. Compatible with: AGV K6 helmets.

Features:

• 100% polycarbonate
• 190° horizontal field of view
• 4mm thickness
• 85° vertical field of view
• Anti-scratch
• Max Pinlock not included
• Max Pinlock ready
• Optic class 1
• UV protective

SP1 scratch resistant, Max Pinlock ready visor. Compatible with: AGV K6 helmets.

Features:

• 100% polycarbonate
• 190° horizontal field of view
• 4mm thickness
• 85° vertical field of view
• Anti-scratch
• Max Pinlock not included
• Max Pinlock ready
• Optic class 1
• UV protective

Street 8 scratch resistant, Max Pinlock ready visor. Compatible with: AGV K3 and K4 helmets (Not K3 SV).

Tear-off kit (3 pieces) for the AGV Race 3 Visor.

The 100% Max Vision Pinlock 120 fog resistant insert lens is our premium solution for AGV helmets. This lens has become the benchmark for fog resistant performance that is most commonly used by riders across the world. The insert is made of a moisture absorbing plastic and, therefore the surface basically dry when used. The insert has a silicone seal that creates a double shield system.

Compatible with: AGV Tourmodular helmets.

The Pinlock 70 fog resistant insert lens is our premium solution for AGV helmets. This lens has become the benchmark for fog resistant performance that is most commonly used by riders across the world. The insert is made of a moisture absorbing plastic and, therefore, the surface basically dry when used. The insert has a silicone seal that creates a double shield system.

Compatible with: AGV X3000 helmets.

Pins are a rich staple in the pantheon of personal affectations that tie their wearers to the bikerider lifestyle.

We've got all kinds: faux brass, colored enamel, antique bronze, you name it.

Every one features a single or double mounting post with a clasp to keep them hooked to your cut.

Too many styles to list, and we add new ones all the time—buy them all and swap with friends.   

Pins are a rich staple in the pantheon of personal affectations that tie their wearers to the bikerider lifestyle.

We've got all kinds: faux brass, colored enamel, antique bronze, you name it.

Every one features a single or double mounting post with a clasp to keep them hooked to your cut.

Too many styles to list, and we add new ones all the time—buy them all and swap with friends.   

Pins are a rich staple in the pantheon of personal affectations that tie their wearers to the bikerider lifestyle.

We've got all kinds: faux brass, colored enamel, antique bronze, you name it.

Every one features a single or double mounting post with a clasp to keep them hooked to your cut.

Too many styles to list, and we add new ones all the time—buy them all and swap with friends.   

Pins are a rich staple in the pantheon of personal affectations that tie their wearers to the bikerider lifestyle.

We've got all kinds: faux brass, colored enamel, antique bronze, you name it.

Every one features a single or double mounting post with a clasp to keep them hooked to your cut.

Too many styles to list, and we add new ones all the time—buy them all and swap with friends.   

Pins are a rich staple in the pantheon of personal affectations that tie their wearers to the bikerider lifestyle.

We've got all kinds: faux brass, colored enamel, antique bronze, you name it.

Every one features a single or double mounting post with a clasp to keep them hooked to your cut.

Too many styles to list, and we add new ones all the time—buy them all and swap with friends.   

Our laser-cut plastic flex shield covers the eye port on ECE-certified Gringo helmets to protect you from the elements.

Features:

• Polycarbonate plastic material resists impacts from flying road debris
• Five nickel-plates stainless-steel snaps attach the shield over Gringo eye port
• Fits XS-XXL ECE-certified Gringo helmets
• Clear, Smoke and Chrome tints available
• Provides 91% UV/A and 99% UV/B light resistance based on AATCC-138 test standard
• This shield is not anti-fog coated, but you can apply your own aftermarket anti-fog spray of choice

Care & Maintenance:

Easy to install in a snap by fastening it to the five snaps around the eye port on your Gringo helmet. Removes quickly for storage or cleaning. Use mild soapy water and a microfiber cloth only for cleaning. DO NOT put harsh household or petroleum-based chemicals on the shield as damage will occur. Apply a drop of standard light household oil inside each snap before installation to make reduce oxidation and make removal easier.

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in stainless steel screws and anodized washer colours so you can fine-tune the look of your lid.

Features:

• Kits fit Gringo S and Lane Splitter helmets to compliment or replace stock components
• Stamped alloy washers with anodized finish
• Stainless steel screws feature thread lock compound already applied
• Each kit includes two screws and two washers

Install Tips:

Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN.

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in stainless steel screws and anodized washer colours so you can fine-tune the look of your lid.

Features:

• Kits fit Gringo S and Lane Splitter helmets to compliment or replace stock components
• Stamped alloy washers with anodized finish
• Stainless steel screws feature thread lock compound already applied
• Each kit includes two screws and two washers

Install Tips:

Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN.

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in stainless steel screws and anodized washer colours so you can fine-tune the look of your lid.

Features:

• Kits fit Gringo S and Lane Splitter helmets to compliment or replace stock components
• Stamped alloy washers with anodized finish
• Stainless steel screws feature thread lock compound already applied
• Each kit includes two screws and two washers

Install Tips:

Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN.

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in stainless steel screws and anodized washer colours so you can fine-tune the look of your lid.

Features:

• Kits fit Gringo S and Lane Splitter helmets to compliment or replace stock components
• Stamped alloy washers with anodized finish
• Stainless steel screws feature thread lock compound already applied
• Each kit includes two screws and two washers

Install Tips:

Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN.

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in stainless steel screws and anodized washer colours so you can fine-tune the look of your lid.

Features:

• Kits fit Gringo S and Lane Splitter helmets to compliment or replace stock components
• Stamped alloy washers with anodized finish
• Stainless steel screws feature thread lock compound already applied
• Each kit includes two screws and two washers

Install Tips:

Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN.

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in stainless steel screws and anodized washer colours so you can fine-tune the look of your lid.

Features:

• Kits fit Gringo S and Lane Splitter helmets to compliment or replace stock components
• Stamped alloy washers with anodized finish
• Stainless steel screws feature thread lock compound already applied
• Each kit includes two screws and two washers

Install Tips:

Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN.

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in stainless steel screws and anodized washer colours so you can fine-tune the look of your lid.

Features:

• Kits fit Gringo S and Lane Splitter helmets to compliment or replace stock components
• Stamped alloy washers with anodized finish
• Stainless steel screws feature thread lock compound already applied
• Each kit includes two screws and two washers

Install Tips:

Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN.

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in stainless steel screws and anodized washer colours so you can fine-tune the look of your lid.

Features:

• Kits fit Gringo S and Lane Splitter helmets to compliment or replace stock components
• Stamped alloy washers with anodized finish
• Stainless steel screws feature thread lock compound already applied
• Each kit includes two screws and two washers

Install Tips:

Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN.

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in stainless steel screws and anodized washer colours so you can fine-tune the look of your lid.

Features:

• Kits fit Gringo S and Lane Splitter helmets to compliment or replace stock components
• Stamped alloy washers with anodized finish
• Stainless steel screws feature thread lock compound already applied
• Each kit includes two screws and two washers

Install Tips:

Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN.

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in stainless steel screws and anodized washer colours so you can fine-tune the look of your lid.

Features:

• Kits fit Gringo S and Lane Splitter helmets to compliment or replace stock components
• Stamped alloy washers with anodized finish
• Stainless steel screws feature thread lock compound already applied
• Each kit includes two screws and two washers

Install Tips:

Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN.

Replacement shields for Gringo S helmets are injection molded with highly scratch- and impact-resistant polycarbonate thermoplastic. Our latest Gen-2 shields fit all Gringo S models because they ship with an all-new baseplate kit. These baseplates have an improved mechanism that results in firmer detents for three open positions. Anti-fog treatment included for maximum optical clarity.

Features:

• Injection-molded scratch-and impact-resistant polycarbonate thermoplastic construction
• Nickel-plated stainless-steel snap on shield fastens securely to snap on helmet shell
• Colored shields feature in-mold tint technology
• Mirrored shields feature reflective coating in a variety of surface finishes to reduce glare
• Every shield color and style provides 91% UV/A and 99% UV/B light resistance based on AATCC-138 test standard
• Anti-fog treatment on shield interior fights moisture build-up from breathing and humidity 

Care & Maintenance:

To clean your visor, use mild soapy water solution and a microfiber cloth to loosen bugs and road debris, then dry it with a second clean microfiber towel. Never use harsh household or petroleum-based chemicals to clean your shield, especially on the inside, as they can destroy the shield's special coatings. If the retainer snap on your Gringo S shield becomes tight or sticky, apply one drop of general-purpose light household oil to the inside. Apply one drop of medium-strength blue Loc-Tite to the threads of both hinge screws every time you install a visor.

Replacement shields for Gringo S helmets are injection molded with highly scratch- and impact-resistant polycarbonate thermoplastic. Our latest Gen-2 shields fit all Gringo S models because they ship with an all-new baseplate kit. These baseplates have an improved mechanism that results in firmer detents for three open positions. Anti-fog treatment included for maximum optical clarity.

Features:

• Injection-molded scratch-and impact-resistant polycarbonate thermoplastic construction
• Nickel-plated stainless-steel snap on shield fastens securely to snap on helmet shell
• Colored shields feature in-mold tint technology
• Mirrored shields feature reflective coating in a variety of surface finishes to reduce glare
• Every shield color and style provides 91% UV/A and 99% UV/B light resistance based on AATCC-138 test standard
• Anti-fog treatment on shield interior fights moisture build-up from breathing and humidity 

Care & Maintenance:

To clean your visor, use mild soapy water solution and a microfiber cloth to loosen bugs and road debris, then dry it with a second clean microfiber towel. Never use harsh household or petroleum-based chemicals to clean your shield, especially on the inside, as they can destroy the shield's special coatings. If the retainer snap on your Gringo S shield becomes tight or sticky, apply one drop of general-purpose light household oil to the inside. Apply one drop of medium-strength blue Loc-Tite to the threads of both hinge screws every time you install a visor.

Replacement shields for Gringo S helmets are injection molded with highly scratch- and impact-resistant polycarbonate thermoplastic. Our latest Gen-2 shields fit all Gringo S models because they ship with an all-new baseplate kit. These baseplates have an improved mechanism that results in firmer detents for three open positions. Anti-fog treatment included for maximum optical clarity.

Features:

• Injection-molded scratch-and impact-resistant polycarbonate thermoplastic construction
• Nickel-plated stainless-steel snap on shield fastens securely to snap on helmet shell
• Colored shields feature in-mold tint technology
• Mirrored shields feature reflective coating in a variety of surface finishes to reduce glare
• Every shield color and style provides 91% UV/A and 99% UV/B light resistance based on AATCC-138 test standard
• Anti-fog treatment on shield interior fights moisture build-up from breathing and humidity 

Care & Maintenance:

To clean your visor, use mild soapy water solution and a microfiber cloth to loosen bugs and road debris, then dry it with a second clean microfiber towel. Never use harsh household or petroleum-based chemicals to clean your shield, especially on the inside, as they can destroy the shield's special coatings. If the retainer snap on your Gringo S shield becomes tight or sticky, apply one drop of general-purpose light household oil to the inside. Apply one drop of medium-strength blue Loc-Tite to the threads of both hinge screws every time you install a visor.

Replacement visors for Gringo S helmets are injection molded with highly scratch-and impact-resistant polycarbonate thermoplastic. Our latest Gen-2 shields fit all Gringo S models because they ship with an all-new baseplate kit. These baseplates have an improved mechanism that results in firmer detents for three open positions. Anti-fog treatment included for maximum optical clarity.

Features:

• Injection-molded scratch- and impact-resistant polycarbonate thermoplastic construction
• Nickel-plated stainless-steel snap on shield fastens securely to snap on helmet shell
• Colored shields feature in-mold tint technology
• Mirrored shields feature reflective coating in a variety of surface finishes to reduce glare
• Every shield colour and style provides 91% UV/A and 99% UV/B light resistance based on AATCC-138 test standard
• Anti-fog treatment on shield interior fights moisture build-up from breathing and humidity

Care & Maintenance:

To clean your visor, use mild soapy water solution and a microfiber cloth to loosen bugs and road debris, then dry it with a second clean microfiber towel. Never use harsh household or petroleum-based chemicals to clean your shield, especially on the inside, as they can destroy the shield's special coatings. If the retainer snap on your Gringo S shield becomes tight or sticky, apply one drop of general-purpose light household oil to the inside. Apply one drop of medium-strength blue Loc-Tite to the threads of both hinge screws every time you install a visor.