Trail / Enduro

• Formula G rubber with clipless pedal specific tread pattern
• STI Evolution® Foam midsole
• Nylon clipless pedal shank optimized for pedaling efficiency and off bike walkability
• Pro Foam 1 molded PU footbed
• Exo-Shield upper, lightweight, breathable, and protection where it’s needed
• Adjustable Power Strap for extra lockdown
• Repel treated upper blocks moisture
• The Lace Lock on the tongue keeps laces in place
• Lace Guard asymmetric lacing keeps laces protected from pedals
• Nylon pull loop on heel and tongue
• System Flo2 Compression Tongue provides air flow to the foot and keeps debris out
• Reflective heel panel for safet

The Camber Crank is designed around a grippy 3X more durable Michelin tread and features a toe and heel lugged tread pattern. If you want more grip on your pedals and a stiff durable sole, the Camber Crank is the answer for you to own the hill.

• TPU molded Pedal Shank 2 in the midsole
• STI Evolution Foam midsole
• Grippy Michelin tread pattern designed for flat pedals
• Toe and heel luggy tread
• Stiff board last
• Abrasion resistant PU Nubuck upper
• Rubber print on heel pattern
• Pocket on top on tongue for lace tuck
• Tongue gussets
• Reflective heel panel for safety
• Action Nubuck/Synthetic

The etnies crank collection embodies everything on two wheels. The Camber Crank is designed around a grippy 3X more durable Michelin tread and features a toe and heel lugged tread pattern. If you want more grip on your pedals and a stiff durable sole, the Camber Crank is the answer for you to own the hill.

• Pro foam 1 insole
• STI Evolution Foam midsole
• Grippy Michelin tread pattern designed for flat pedals
• Toe and heel luggy tread
• Stiff board last
• Abrasion resistant PU Nubuck upper
• Rubber print on heel pattern
• Pocket on top on tongue for lace tuck
• Tongue gussets
• Action Nubuck/ Synthetic

The etnies crank collection embodies everything on two wheels. The Camber Crank is designed around a grippy 3X more durable Michelin tread and features a toe and heel lugged tread pattern. If you want more grip on your pedals and a stiff durable sole, the Camber Crank is the answer for you to own the hill.

• Pro foam 1 insole
• STI Evolution Foam midsole
• Grippy Michelin tread pattern designed for flat pedals
• Toe and heel luggy tread
• Stiff board last
• Abrasion resistant PU Nubuck upper
• Rubber print on heel pattern
• Pocket on top on tongue for lace tuck
• Tongue gussets
• Action Nubuck/ Synthetic

The etnies crank collection embodies everything on two wheels. The Camber Crank is designed around a grippy 3X more durable Michelin tread and features a toe and heel lugged tread pattern. If you want more grip on your pedals and a stiff durable sole, the Camber Crank is the answer for you to own the hill.

• Pro foam 1 insole
• STI Evolution Foam midsole
• Grippy Michelin tread pattern designed for flat pedals
• Toe and heel luggy tread
• Stiff board last
• Abrasion resistant PU Nubuck upper
• Rubber print on heel pattern
• Pocket on top on tongue for lace tuck
• Tongue gussets
• Action Nubuck/ Synthetic

The Camber Crank is designed around a grippy 3X more durable Michelin tread and features a toe and heel lugged tread pattern. If you want more grip on your pedals and a stiff durable sole, the Camber Crank is the answer for you to own the hill.

• TPU molded Pedal Shank 2 in the midsole
• STI Evolution Foam midsole
• Grippy Michelin tread pattern designed for flat pedals
• Toe and heel luggy tread
• Stiff board last
• Abrasion resistant PU Nubuck upper
• Rubber print on heel pattern
• Pocket on top on tongue for lace tuck
• Tongue gussets
• Reflective heel panel for safety
• Action Nubuck/Synthetic

The Camber Crank is designed around a grippy 3X more durable Michelin tread and features a toe and heel lugged tread pattern. If you want more grip on your pedals and a stiff durable sole, the Camber Crank is the answer for you to own the hill.

• TPU molded Pedal Shank 2 in the midsole
• STI Evolution Foam midsole
• Grippy Michelin tread pattern designed for flat pedals
• Toe and heel luggy tread
• Stiff board last
• Abrasion resistant PU Nubuck upper
• Rubber print on heel pattern
• Pocket on top on tongue for lace tuck
• Tongue gussets
• Reflective heel panel for safety
• Action Nubuck/Synthetic

The Camber Crank is designed around a grippy 3X more durable Michelin tread and features a toe and heel lugged tread pattern. If you want more grip on your pedals and a stiff durable sole, the Camber Crank is the answer for you to own the hill.

• TPU molded Pedal Shank 2 in the midsole
• STI Evolution Foam midsole
• Grippy Michelin tread pattern designed for flat pedals
• Toe and heel luggy tread
• Stiff board last
• Abrasion resistant PU Nubuck upper
• Rubber print on heel pattern
• Pocket on top on tongue for lace tuck
• Tongue gussets
• Reflective heel panel for safety
• Action Nubuck/Synthetic

• New Michelin Fiber Lite Technology offers lightweight and flexible performance now combined with OCX3, Michelin’s MTB specific rubber compound for 3x more grip in all conditions
• Pro Foam 1 molded PU footbed
• STI Evolution® Foam midsole
• TPU molded ¾ perfectly balancing pedal feel and pedaling efficiency
• Exo Shield upper, lightweight, breathable, and protection where it’s needed
• Repel treated upper blocks moisture
• The Lace Lock on the tongue keeps laces in place
• Lace Guard asymmetric lacing keeps laces protected from pedals
• Nylon pull loop on heel and tongue
• System Flo2 Compression Tongue provides air flow to the foot and keeps debris out
• Reflective heel panel for safety
• Action Nubuck/TPU/Cordura

• New Michelin Fiber Lite Technology offers lightweight and flexible performance now combined with OCX3, Michelin’s MTB specific rubber compound for 3x more grip in all conditions
• Pro Foam 1 molded PU footbed
• STI Evolution® Foam midsole
• TPU molded ¾ perfectly balancing pedal feel and pedaling efficiency
• Exo-Shield upper, lightweight, breathable, and protection where it’s needed
• Repel treated upper blocks moisture
• The Lace Lock on the tongue keeps laces in place
• Lace Guard asymmetric lacing keeps laces protected from pedals
• Nylon pull loop on heel and tongue
• System Flo2 Compression Tongue provides air flow to the foot and keeps debris out
• Reflective heel panel for safety
• Emil Johansson Colorway
• Action Nubuck/TPU/Cordura

The Culvert Mid is a new enduro/downhill shoe from etnies. It has sticky Michelin compound that provides excellent pedal and surface grip. It has a force shield reinforced upper with a hot-melted toe and heel cap. This shoe is repel treated that blocks moisture with 3M thinsulate lining. Tongue gussets shield moisture, dirt, and pebbles. Includes a lace pocket on top of the tongue with TPU molded Pedal Shank 2 in the midsole. Also has Nylon pull loop on heel.

Features:

• Sticky Michelin compound provides excellent pedal and surface grip
• Force Shield reinforced upper
• Hot-melted toe and heel cap
• Repel treated upper blocks moisture
• 3M Thinsulate™ lining
• Tongue Gussets shields moisture, dirt and pebbles
• The Lace Pocket on top of the tongue
• TPU molded Pedal Shank 2 in the midsole
• Pro Foam 1 molded PU footbed
• Die Cut EVA foam midsole
• Nylon pull loop on heel
• Action Nubuck/Synthetic

The Culvert Mid is a new enduro/downhill shoe from etnies. It has sticky Michelin compound that provides excellent pedal and surface grip. It has a force shield reinforced upper with a hot-melted toe and heel cap. This shoe is repel treated that blocks moisture with 3M thinsulate lining. Tongue gussets shield moisture, dirt, and pebbles. Includes a lace pocket on top of the tongue with TPU molded Pedal Shank 2 in the midsole. Also has Nylon pull loop on heel.

Features:

• Sticky Michelin compound provides excellent pedal and surface grip
• Force Shield reinforced upper
• Hot-melted toe and heel cap
• Repel treated upper blocks moisture
• 3M Thinsulate™ lining
• Tongue Gussets shields moisture, dirt and pebbles
• The Lace Pocket on top of the tongue
• TPU molded Pedal Shank 2 in the midsole
• Pro Foam 1 molded PU footbed
• Die Cut EVA foam midsole
• Nylon pull loop on heel
• Action Nubuck/Synthetic

The Culvert Mid is a new enduro/downhill shoe from etnies. It has sticky Michelin compound that provides excellent pedal and surface grip. It has a force shield reinforced upper with a hot-melted toe and heel cap. This shoe is repel treated that blocks moisture with 3M thinsulate lining. Tongue gussets shield moisture, dirt, and pebbles. Includes a lace pocket on top of the tongue with TPU molded Pedal Shank 2 in the midsole. Also has Nylon pull loop on heel.

Features:

• Sticky Michelin compound provides excellent pedal and surface grip
• Force Shield reinforced upper
• Hot-melted toe and heel cap
• Repel treated upper blocks moisture
• 3M Thinsulate™ lining
• Tongue Gussets shields moisture, dirt and pebbles
• The Lace Pocket on top of the tongue
• TPU molded Pedal Shank 2 in the midsole
• Pro Foam 1 molded PU footbed
• Die Cut EVA foam midsole
• Nylon pull loop on heel
• Action Nubuck/Synthetic

The Culvert Mid is a new enduro/downhill shoe from etnies. It has sticky Michelin compound that provides excellent pedal and surface grip. It has a force shield reinforced upper with a hot-melted toe and heel cap. This shoe is repel treated that blocks moisture with 3M thinsulate lining. Tongue gussets shield moisture, dirt, and pebbles. Includes a lace pocket on top of the tongue with TPU molded Pedal Shank 2 in the midsole. Also has Nylon pull loop on heel.

Features:

• Sticky Michelin compound provides excellent pedal and surface grip
• Force Shield reinforced upper
• Hot-melted toe and heel cap
• Repel treated upper blocks moisture
• 3M Thinsulate™ lining
• Tongue Gussets shields moisture, dirt and pebbles
• The Lace Pocket on top of the tongue
• TPU molded Pedal Shank 2 in the midsole
• Pro Foam 1 molded PU footbed
• Die Cut EVA foam midsole
• Nylon pull loop on heel
• Action Nubuck/Synthetic

The Culvert Mid is a new enduro/downhill shoe from etnies. It has sticky Michelin compound that provides excellent pedal and surface grip. It has a force shield reinforced upper with a hot-melted toe and heel cap. This shoe is repel treated that blocks moisture with 3M thinsulate lining. Tongue gussets shield moisture, dirt, and pebbles. Includes a lace pocket on top of the tongue with TPU molded Pedal Shank 2 in the midsole. Also has Nylon pull loop on heel.

Features:

• Sticky Michelin compound provides excellent pedal and surface grip
• Force Shield reinforced upper
• Hot-melted toe and heel cap
• Repel treated upper blocks moisture
• 3M Thinsulate™ lining
• Tongue Gussets shields moisture, dirt and pebbles
• The Lace Pocket on top of the tongue
• TPU molded Pedal Shank 2 in the midsole
• Pro Foam 1 molded PU footbed
• Die Cut EVA foam midsole
• Nylon pull loop on heel
• Action Nubuck/Synthetic

The Culvert is a new enduro/downhill shoe from etnies. It has sticky Michelin compound that provides excellent pedal and surface grip. It has a force shield reinforced upper with a hot-melted toe and heel cap. This shoe is repel treated that blocks moisture with 3M thinsulate lining. Tongue gussets shield moisture, dirt, and pebbles. Includes a lace pocket on top of the tongue with TPU molded Pedal Shank 2 in the midsole. Also has Nylon pull loop on heel.

Features:

• Sticky Michelin compound provides excellent pedal and surface grip
• Force Shield reinforced upper
• Hot-melted toe and heel cap
• Repel treated upper blocks moisture
• 3M Thinsulate™ lining
• Tongue Gussets shields moisture, dirt and pebbles
• The Lace Pocket on top of the tongue
• TPU molded Pedal Shank 2 in the midsole
• Pro Foam 1 molded PU footbed
• Die Cut EVA foam midsole
• Nylon pull loop on heel
• Action Nubuck/Synthetic

The Culvert is a new enduro/downhill shoe from etnies. It has sticky Michelin compound that provides excellent pedal and surface grip. It has a force shield reinforced upper with a hot-melted toe and heel cap. This shoe is repel treated that blocks moisture with 3M thinsulate lining. Tongue gussets shield moisture, dirt, and pebbles. Includes a lace pocket on top of the tongue with TPU molded Pedal Shank 2 in the midsole. Also has Nylon pull loop on heel.

• Sticky Michelin compound provides excellent pedal and surface grip
• Force Shield reinforced upper
• Hot-melted toe and heel cap
• Repel treated upper blocks moisture
• 3M Thinsulate™ lining
• Tongue Gussets shields moisture, dirt and pebbles
• The Lace Pocket on top of the tongue
• TPU molded Pedal Shank 2 in the midsole
• Pro Foam 1 molded PU footbed
• Die Cut EVA foam midsole
• Nylon pull loop on heel
• Action Nubuck/Synthetic

The Culvert is a new enduro/downhill shoe from etnies. It has sticky Michelin compound that provides excellent pedal and surface grip. It has a force shield reinforced upper with a hot-melted toe and heel cap. This shoe is repel treated that blocks moisture with 3M thinsulate lining. Tongue gussets shield moisture, dirt, and pebbles. Includes a lace pocket on top of the tongue with TPU molded Pedal Shank 2 in the midsole. Also has Nylon pull loop on heel.

Features:

• Sticky Michelin compound provides excellent pedal and surface grip
• Force Shield reinforced upper
• Hot-melted toe and heel cap
• Repel treated upper blocks moisture
• 3M Thinsulate™ lining
• Tongue Gussets shields moisture, dirt and pebbles
• The Lace Pocket on top of the tongue
• TPU molded Pedal Shank 2 in the midsole
• Pro Foam 1 molded PU footbed
• Die Cut EVA foam midsole
• Nylon pull loop on heel
• Action Nubuck/Synthetic

The Culvert is a new enduro/downhill shoe from etnies. It has sticky Michelin compound that provides excellent pedal and surface grip. It has a force shield reinforced upper with a hot-melted toe and heel cap. This shoe is repel treated that blocks moisture with 3M thinsulate lining. Tongue gussets shield moisture, dirt, and pebbles. Includes a lace pocket on top of the tongue with TPU molded Pedal Shank 2 in the midsole. Also has Nylon pull loop on heel.

• Sticky Michelin compound provides excellent pedal and surface grip
• Force Shield reinforced upper
• Hot-melted toe and heel cap
• Repel treated upper blocks moisture
• 3M Thinsulate™ lining
• Tongue Gussets shields moisture, dirt and pebbles
• The Lace Pocket on top of the tongue
• TPU molded Pedal Shank 2 in the midsole
• Pro Foam 1 molded PU footbed
• Die Cut EVA foam midsole
• Nylon pull loop on heel
• Action Nubuck/Synthetic

The Culvert is a new enduro/downhill shoe from etnies. It has sticky Michelin compound that provides excellent pedal and surface grip. It has a force shield reinforced upper with a hot-melted toe and heel cap. This shoe is repel treated that blocks moisture with 3M thinsulate lining. Tongue gussets shield moisture, dirt, and pebbles. Includes a lace pocket on top of the tongue with TPU molded Pedal Shank 2 in the midsole. Also has Nylon pull loop on heel.

Features:

• Sticky Michelin compound provides excellent pedal and surface grip
• Force Shield reinforced upper
• Hot-melted toe and heel cap
• Repel treated upper blocks moisture
• 3M Thinsulate™ lining
• Tongue Gussets shields moisture, dirt and pebbles
• The Lace Pocket on top of the tongue
• TPU molded Pedal Shank 2 in the midsole
• Pro Foam 1 molded PU footbed
• Die Cut EVA foam midsole
• Nylon pull loop on heel
• Action Nubuck/Synthetic

With over 30 years of building high performance footwear rooted in skateboarding and action sports, etnies is excited to elevate the mountain bike footwear category with the most durable footwear and the sport’s biggest name. As the pioneer he is, Semenuk worked with etnies to revolutionize mountain bike footwear to give him the support and protection his riding requires. The Jameson Mid CRANK is Semenuk’s signature model designed to provide advanced footwear housed in a super clean silhouette; and Brandon’s signature shoe is no different. This inaugural shoe offers mountain bike-grade stiffness with free-ride functionality and durability, providing a shoe that is as versatile as Semenuk.

·       Designed by Brandon Semenuk

·       Pro foam 1 insole

·       Stroble board midsole for stiffness and pedal feel

·       Asymmetrical collar for ankle protection

·       TPU underlay on vamp for reinforced fit

·       Grippy Geo-Hex tread pattern

·       Extra PU nubuck

·       Tongue gussets

Designed by Brandon Semenuk himself, This shoe has an outsole tread pattern designed for multi-placement pedals with Force Shield reinforced upper. A hot-melted quarter panel with repel treated upper that blocks moisture. 3M Thinsulate lining and tongue gussets that shields moisture, dirt, and pebbles. Ankle Shield protects your inner ankle from the gears and bike frame. Lace pocket on top of tongue and Pro Foam 1 molded PU footbed.

• Designed by Brandon Semenuk
• Outsole tread pattern designed for multi-placement for pedals
• Force Shield reinforced upper
• Hot-melted quarter panel
• Repel treated upper blocks moisture
• 3M Thinsulate™ lining
• Tongue Gussets shields moisture, dirt and pebbles
• Ankle Shield protects your inner ankle from the gears and bike frame
• The Lace Pocket on top of the tongue
• Reinforced board lasted Pedal Shank 1 in the midsole
• Pro Foam 1 molded PU footbed

Designed by Brandon Semenuk himself, This shoe has an outsole tread pattern designed for multi-placement pedals with Force Shield reinforced upper. A hot-melted quarter panel with repel treated upper that blocks moisture. 3M Thinsulate lining and tongue gussets that shields moisture, dirt, and pebbles. Ankle Shield protects your inner ankle from the gears and bike frame. Lace pocket on top of tongue and Pro Foam 1 molded PU footbed.

• Designed by Brandon Semenuk
• Outsole tread pattern designed for multi-placement for pedals
• Force Shield reinforced upper
• Hot-melted quarter panel
• Repel treated upper blocks moisture
• 3M Thinsulate™ lining
• Tongue Gussets shields moisture, dirt and pebbles
• Ankle Shield protects your inner ankle from the gears and bike frame
• The Lace Pocket on top of the tongue
• Reinforced board lasted Pedal Shank 1 in the midsole
• Pro Foam 1 molded PU footbed

Designed by Brandon Semenuk himself, This shoe has an outsole tread pattern designed for multi-placement pedals with Force Shield reinforced upper. A hot-melted quarter panel with repel treated upper that blocks moisture. 3M Thinsulate lining and tongue gussets that shields moisture, dirt, and pebbles. Ankle Shield protects your inner ankle from the gears and bike frame. Lace pocket on top of tongue and Pro Foam 1 molded PU footbed.

• Designed by Brandon Semenuk
• Outsole tread pattern designed for multi-placement for pedals
• Force Shield reinforced upper
• Hot-melted quarter panel
• Repel treated upper blocks moisture
• 3M Thinsulate™ lining
• Tongue Gussets shields moisture, dirt and pebbles
• Ankle Shield protects your inner ankle from the gears and bike frame
• The Lace Pocket on top of the tongue
• Reinforced board lasted Pedal Shank 1 in the midsole
• Pro Foam 1 molded PU footbed

Designed by Brandon Semenuk himself, This shoe has an outsole tread pattern designed for multi-placement pedals with Force Shield reinforced upper. A hot-melted quarter panel with repel treated upper that blocks moisture. 3M Thinsulate lining and tongue gussets that shields moisture, dirt, and pebbles. Ankle Shield protects your inner ankle from the gears and bike frame. Lace pocket on top of tongue and Pro Foam 1 molded PU footbed.

• Designed by Brandon Semenuk
• Outsole tread pattern designed for multi-placement for pedals
• Force Shield reinforced upper
• Hot-melted quarter panel
• Repel treated upper blocks moisture
• 3M Thinsulate™ lining
• Tongue Gussets shields moisture, dirt and pebbles
• Ankle Shield protects your inner ankle from the gears and bike frame
• The Lace Pocket on top of the tongue
• Reinforced board lasted Pedal Shank 1 in the midsole
• Pro Foam 1 molded PU footbed

Designed by Brandon Semenuk himself, This shoe has an outsole tread pattern designed for multi-placement pedals with Force Shield reinforced upper. A hot-melted quarter panel with repel treated upper that blocks moisture. 3M Thinsulate lining and tongue gussets that shields moisture, dirt, and pebbles. Ankle Shield protects your inner ankle from the gears and bike frame. Lace pocket on top of tongue and Pro Foam 1 molded PU footbed.

• Designed by Brandon Semenuk
• Outsole tread pattern designed for multi-placement for pedals
• Force Shield reinforced upper
• Hot-melted quarter panel
• Repel treated upper blocks moisture
• 3M Thinsulate™ lining
• Tongue Gussets shields moisture, dirt and pebbles
• Ankle Shield protects your inner ankle from the gears and bike frame
• The Lace Pocket on top of the tongue
• Reinforced board lasted Pedal Shank 1 in the midsole
• Pro Foam 1 molded PU footbed

Designed by Brandon Semenuk himself, This shoe has an outsole tread pattern designed for multi-placement pedals with Force Shield reinforced upper. A hot-melted quarter panel with repel treated upper that blocks moisture. 3M Thinsulate lining and tongue gussets that shields moisture, dirt, and pebbles. Ankle Shield protects your inner ankle from the gears and bike frame. Lace pocket on top of tongue and Pro Foam 1 molded PU footbed.

• Designed by Brandon Semenuk
• Outsole tread pattern designed for multi-placement for pedals
• Force Shield reinforced upper
• Hot-melted quarter panel
• Repel treated upper blocks moisture
• 3M Thinsulate™ lining
• Tongue Gussets shields moisture, dirt and pebbles
• Ankle Shield protects your inner ankle from the gears and bike frame
• The Lace Pocket on top of the tongue
• Reinforced board lasted Pedal Shank 1 in the midsole
• Pro Foam 1 molded PU footbed

Trail-specific mountain bike socks

Part of the Tahnee Seagrave Collection, the Ranger TS57 6" Socks are ready for your brand of trail rowdiness. The mesh zones of these socks provide exceptional breathability and ventilation, without breaking your budget. When the trail gets rough, the cushioned heel and toe deliver on the promise of comfort, while the rib-knit upper will ensure these socks stay exactly at the height you pulled them up to.

Specifications

• Mesh zones provide added breathability
• Compression arch support for superior fit and comfort
• Rib-knit upper won’t slide down when the trail gets rough
• Flat-stitch toe construction offers improved comfort
• Unisex sizing

Materials

• 69% polyamide nylon, 14% cotton, 12% polyester, 5% elastane

Care

• Machine wash cold & gentle
• Wash dark colors separately
• Tumble dry low
• Do not bleach
• Do not iron
• Do not dry clean

Versatile, lightweight trail helmet

The all-new Crossframe Pro Helmet is bred for elevated heart rates, all-out sprints, and everything in between. Lightweight, versatile, and crafted with Mips® and BOA®, this helmet is ready for any trail that you are.

Specifications

• Mips® added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain
• Dual-density Varizorb EPS provides improved protection by spreading forces of impact across a wider area
• FIDLOCK SNAP helmet buckle provides quick and secure entry and exit, even while wearing gloves
• Strap divider adjustment for repositioning the angle of the chinstrap
• Removable, washable Ionic+® liner is anti-microbial and manages odor while wicking moisture away from the head
• Optimized venting with channeled, in-molded EPS provides efficient cooling
• BOA® Fit System with micro-adjustability allows you to fine-tune your fit on the fly
• Rear cradle adjustment for setting the BOA dial to an ideal position
• TPU vent inserts to keep your sunglasses securely stored when not in use

Size

• Sizes: small, medium, and large (see size guide for measurements)

How to Dial Your Fit

• BOA® dial: micro adjustments - counterclockwise to loosen, clockwise to tighten - allows for a precisely dialed fit. Adjust while wearing the helmet.
• Back cradle: four points of adjustment move the cradle up or down your head to ensure the best fit possible.
• Liner: two liners are included with the helmet - a preinstalled standard pad set and one additional standard pad set. For a more snug fit, there's an optional thick liner set sold separately.

Materials & Care

Note: Avoid exposure to aerosol sprays like bug repellent and sunscreens as they can cause your helmet's finish to peel

Materials: 55% EPS, 17% PC, 11% nylon, 8% fabric, 6% TPU, 2% metal, 1% pom

BEST IN CLASS HELMET SAFETY

The Dropframe Pro helmet earned the “Best Available” 5-Star rating from Virginia Tech University. Additionally, the Dropframe Pro earned the #1 rating of ANY of the 99 helmets tested as part of this project. This includes all categories of open-face bicycle helmets including mountain, road, and urban styles.

OUR MAXIMUM COVERAGE OPEN-FACE MTB HELMET

The Dropframe Pro Helmet redefines what an open-face MTB helmet can be. Superlight and extremely comfortable, it's the choice for trail riders seeking more coverage, more confidence, and more fun. This game-changing open-faced enduro helmet features MIPS™, our dual-density Varizorb™ EPS liner, and increased coverage for the ears, jaw, and back of the head. This MTB helmet provides the most complete coverage we offer in an open-face helmet.

FEATURES

• Proven MIPS™ impact protection system reduces rotational forces in a crash
• Dual-density Varizorb™ EPS liner is meant to provide improved impact protection
• 8 Big Bore vents and 7 exhaust vents keep you cool and aid in moisture management
• Fixed visor is positioned perfectly for maximum air flow
• Fidlock® SNAP helmet buckle provides quick entry and exit
• Removable antimicrobial and moisture wicking liner
• Includes additional pads for a custom fit

CERTIFICATIONS

• CPSC
• EN 1078
• AS/NZS 2063

Redefining open-face mountain bike helmets, the Dropframe Pro Helmet is super light and extremely comfortable, making it the number one choice for trail riders seeking more coverage, more confidence, and more fun. This game-changing open-faced enduro helmet features MIPS™ technology, a dual-density Varizorb™ EPS liner, Fidlock® SNAP buckle system, and increased coverage for the ears, jaw, and back of the head. 

Ventilation and airflow are assured with 8 Big Bore vents and 7 exhaust vents, and a visor that is positioned to channel airflow into the Big Bore vents. This MTB helmet provides the most complete coverage we offer in an open-face helmet.

• MIPS™ added protection system has been proven to reduce the rotational motion by absorbing and redirecting energies and forces otherwise transmitted to the brain 
• Dual-density Varizorb EPS provides improved protection by spreading forces of impact across a wider area 
• 8 Big Bore vents and 7 exhaust vents keep you cool and aid in moisture management 
• The securely fixed visor is positioned to channel airflow into the Big Bore vents 
• Fidlock® SNAP helmet buckle provides quick and secure entry and exit while wearing gloves 
• Removable antimicrobial and moisture-wicking liner 
• Includes additional pads for a custom, dialed fit 
• EPS, PC, PA, Epp, polyester

Redefining open-face mountain bike helmets, the Dropframe Pro Helmet is super light and extremely comfortable, making it the number one choice for trail riders seeking more coverage, more confidence, and more fun. This game-changing open-faced enduro helmet features MIPS™ technology, a dual-density Varizorb™ EPS liner, Fidlock® SNAP buckle system, and increased coverage for the ears, jaw, and back of the head. 

Ventilation and airflow are assured with 8 Big Bore vents and 7 exhaust vents, and a visor that is positioned to channel airflow into the Big Bore vents. This MTB helmet provides the most complete coverage we offer in an open-face helmet.

• MIPS™ added protection system has been proven to reduce the rotational motion by absorbing and redirecting energies and forces otherwise transmitted to the brain 
• Dual-density Varizorb EPS provides improved protection by spreading forces of impact across a wider area 
• 8 Big Bore vents and 7 exhaust vents keep you cool and aid in moisture management 
• The securely fixed visor is positioned to channel airflow into the Big Bore vents 
• Fidlock® SNAP helmet buckle provides quick and secure entry and exit while wearing gloves 
• Removable antimicrobial and moisture-wicking liner 
• Includes additional pads for a custom, dialed fit 
• EPS, PC, PA, Epp, polyester

Redefining open-face mountain bike helmets, the Dropframe Pro Helmet is super light and extremely comfortable, making it the number one choice for trail riders seeking more coverage, more confidence, and more fun. This game-changing open-faced enduro helmet features MIPS™ technology, a dual-density Varizorb™ EPS liner, Fidlock® SNAP buckle system, and increased coverage for the ears, jaw, and back of the head. 

Ventilation and airflow are assured with 8 Big Bore vents and 7 exhaust vents, and a visor that is positioned to channel airflow into the Big Bore vents. This MTB helmet provides the most complete coverage we offer in an open-face helmet.

• MIPS™ added protection system has been proven to reduce the rotational motion by absorbing and redirecting energies and forces otherwise transmitted to the brain 
• Dual-density Varizorb EPS provides improved protection by spreading forces of impact across a wider area 
• 8 Big Bore vents and 7 exhaust vents keep you cool and aid in moisture management 
• The securely fixed visor is positioned to channel airflow into the Big Bore vents 
• Fidlock® SNAP helmet buckle provides quick and secure entry and exit while wearing gloves 
• Removable antimicrobial and moisture-wicking liner 
• Includes additional pads for a custom, dialed fit 
• EPS, PC, PA, Epp, polyester

Redefining open-face mountain bike helmets, the Dropframe Pro Helmet is super light and extremely comfortable, making it the number one choice for trail riders seeking more coverage, more confidence, and more fun. This game-changing open-faced enduro helmet features MIPS™ technology, a dual-density Varizorb™ EPS liner, Fidlock® SNAP buckle system, and increased coverage for the ears, jaw, and back of the head. 

Ventilation and airflow are assured with 8 Big Bore vents and 7 exhaust vents, and a visor that is positioned to channel airflow into the Big Bore vents. This MTB helmet provides the most complete coverage we offer in an open-face helmet.

• MIPS™ added protection system has been proven to reduce the rotational motion by absorbing and redirecting energies and forces otherwise transmitted to the brain 
• Dual-density Varizorb EPS provides improved protection by spreading forces of impact across a wider area 
• 8 Big Bore vents and 7 exhaust vents keep you cool and aid in moisture management 
• The securely fixed visor is positioned to channel airflow into the Big Bore vents 
• Fidlock® SNAP helmet buckle provides quick and secure entry and exit while wearing gloves 
• Removable antimicrobial and moisture-wicking liner 
• Includes additional pads for a custom, dialed fit 
• EPS, PC, PA, Epp, polyester

BEST IN CLASS HELMET SAFETY

The Dropframe Pro helmet earned the “Best Available” 5-Star rating from Virginia Tech University. Additionally, the Dropframe Pro earned the #1 rating of ANY of the 99 helmets tested as part of this project. This includes all categories of open-face bicycle helmets including mountain, road, and urban styles.

OUR MAXIMUM COVERAGE OPEN-FACE MTB HELMET

The Dropframe Pro Helmet redefines what an open-face MTB helmet can be. Superlight and extremely comfortable, it's the choice for trail riders seeking more coverage, more confidence, and more fun. This game-changing open-faced enduro helmet features MIPS™, our dual-density Varizorb™ EPS liner, and increased coverage for the ears, jaw, and back of the head. This MTB helmet provides the most complete coverage we offer in an open-face helmet.

FEATURES

• Proven MIPS™ impact protection system reduces rotational forces in a crash
• Dual-density Varizorb™ EPS liner is meant to provide improved impact protection
• 8 Big Bore vents and 7 exhaust vents keep you cool and aid in moisture management
• Fixed visor is positioned perfectly for maximum air flow
• Fidlock® SNAP helmet buckle provides quick entry and exit
• Removable antimicrobial and moisture wicking liner
• Includes additional pads for a custom fit

CERTIFICATIONS

• CPSC
• EN 1078
• AS/NZS 2063

Redefining open-face mountain bike helmets, the Dropframe Pro Helmet is super light and extremely comfortable, making it the number one choice for trail riders seeking more coverage, more confidence, and more fun. This game-changing open-faced enduro helmet features MIPS™ technology, a dual-density Varizorb™ EPS liner, Fidlock® SNAP buckle system, and increased coverage for the ears, jaw, and back of the head. 

Ventilation and airflow are assured with 8 Big Bore vents and 7 exhaust vents, and a visor that is positioned to channel airflow into the Big Bore vents. This MTB helmet provides the most complete coverage we offer in an open-face helmet.

• MIPS™ added protection system has been proven to reduce the rotational motion by absorbing and redirecting energies and forces otherwise transmitted to the brain 
• Dual-density Varizorb EPS provides improved protection by spreading forces of impact across a wider area 
• 8 Big Bore vents and 7 exhaust vents keep you cool and aid in moisture management 
• The securely fixed visor is positioned to channel airflow into the Big Bore vents 
• Fidlock® SNAP helmet buckle provides quick and secure entry and exit while wearing gloves 
• Removable antimicrobial and moisture-wicking liner 
• Includes additional pads for a custom, dialed fit 
• EPS, PC, PA, Epp, polyester

Our maximum coverage mountain bike helmet featuring ear protection and open face ventilation

Redefining open-face mountain bike helmets, the Dropframe Pro Helmet has earned Virginia Tech’s best rating (5 STARS) in their Bicycle Helmet Ratings program with the best rating of any helmet they have ever tested. Superlight and extremely comfortable, it's the choice for trail riders seeking more coverage, more confidence, and more fun. This game-changing open-faced enduro helmet features MIPS™, our dual-density Varizorb™ EPS liner, and increased coverage for the ears, jaw, and back of the head. This MTB helmet provides the most complete coverage we offer in an open-face helmet.

• Proven MIPS™ impact protection system reduces rotational forces in a crash
• Dual-density Varizorb™ EPS liner is meant to provide improved impact protection
• 8 Big Bore vents and 7 exhaust vents keep you cool and aid in moisture management
• Fixed visor is positioned perfectly for maximum air flow
• Fidlock SNAP helmet buckle provides quick entry and exit
• Removable antimicrobial and moisture wicking liner
• Includes additional pads for a custom fit
• Weight: 750 g, medium

CERTIFICATIONS

• CPSC
• EN 1078
• AS/NZS 206

Our maximum coverage mountain bike helmet featuring ear protection and open face ventilation

Redefining open-face mountain bike helmets, the Dropframe Pro Helmet has earned Virginia Tech’s best rating (5 STARS) in their Bicycle Helmet Ratings program with the best rating of any helmet they have ever tested. Superlight and extremely comfortable, it's the choice for trail riders seeking more coverage, more confidence, and more fun. This game-changing open-faced enduro helmet features MIPS™, our dual-density Varizorb™ EPS liner, and increased coverage for the ears, jaw, and back of the head. This MTB helmet provides the most complete coverage we offer in an open-face helmet.

• Proven MIPS™ impact protection system reduces rotational forces in a crash
• Dual-density Varizorb™ EPS liner is meant to provide improved impact protection
• 8 Big Bore vents and 7 exhaust vents keep you cool and aid in moisture management
• Fixed visor is positioned perfectly for maximum air flow
• Fidlock SNAP helmet buckle provides quick entry and exit
• Removable antimicrobial and moisture wicking liner
• Includes additional pads for a custom fit
• Weight: 750 g, medium

CERTIFICATIONS

• CPSC
• EN 1078
• AS/NZS 206

BEST IN CLASS HELMET SAFETY

The Dropframe Pro helmet earned the “Best Available” 5-Star rating from Virginia Tech University. Additionally, the Dropframe Pro earned the #1 rating of ANY of the 99 helmets tested as part of this project. This includes all categories of open-face bicycle helmets including mountain, road, and urban styles.

OUR MAXIMUM COVERAGE OPEN-FACE MTB HELMET

The Dropframe Pro Helmet redefines what an open-face MTB helmet can be. Superlight and extremely comfortable, it's the choice for trail riders seeking more coverage, more confidence, and more fun. This game-changing open-faced enduro helmet features MIPS™, our dual-density Varizorb™ EPS liner, and increased coverage for the ears, jaw, and back of the head. This MTB helmet provides the most complete coverage we offer in an open-face helmet.

FEATURES

• Proven MIPS™ impact protection system reduces rotational forces in a crash
• Dual-density Varizorb™ EPS liner is meant to provide improved impact protection
• 8 Big Bore vents and 7 exhaust vents keep you cool and aid in moisture management
• Fixed visor is positioned perfectly for maximum air flow
• Fidlock® SNAP helmet buckle provides quick entry and exit
• Removable antimicrobial and moisture wicking liner
• Includes additional pads for a custom fit

CERTIFICATIONS

• CPSC
• EN 1078
• AS/NZS 2063

Maximum coverage open face mountain bike helmet.

The Dropframe Pro Helmet is a game-changing, open-faced 3/4 enduro helmet. It features Mips®, the BOA® fit system for class-leading fit and security, increased ventilation, plus an ionic+® anti-microbial liner and cheek pads to optimize fit. With its increased coverage for the ears, jaw, and back of the head, this MTB helmet provides the most complete coverage we offer in an open-face helmet.

• BOA® fit system for class-leading fit and security 
• Mips® added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain
• 3-position adjustable visor compatible with goggles 
• Removable under visor GoPro mount included 
• Big Bore front vents include eyewear storage recess 
• Increased ventilation and decreased surface contact area improve cooling 
• Ionic+® anti-microbial liner and cheek pads to optimize fit 
• Fidlock magnetic closure 
• Meets the NTA-8776 E-bike helmet certification standard 
• 30% EPS, 11% EVA, 10% polycarbonate, 13% nylon, 11% Pom, 14% Tpee

Maximum coverage open face mountain bike helmet

The Dropframe Pro Helmet is a game-changing, open-faced 3/4 enduro helmet. It features Mips®, the BOA® Fit System for class-leading fit and security, increased ventilation, plus an ionic+® anti-microbial liner and cheek pads to optimize fit. With its increased coverage for the ears, jaw, and back of the head, this MTB helmet provides the most complete coverage we offer in an open-face helmet.

Specifications 

• BOA® Fit System for class-leading fit and security
• Mips® added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain
• 3-position adjustable visor compatible with goggles
• Removable under visor GoPro mount included
• Big Bore front vents include eyewear storage recess
• Increased ventilation and decreased surface contact area improve cooling
• Ionic+® anti-microbial liner and cheek pads to optimize fit
• FIDLOCK magnetic closure
• Meets the NTA-8776 E-bike helmet certification standard

Size

• Sizes: small, medium, and large (see size guide for measurements)

How to Dial Your Fit

• BOA® dial: micro adjustments - counterclockwise to loosen, clockwise to tighten - allows for a precisely dialed fit. Adjust while wearing the helmet.
• Back cradle: four points of adjustment move the cradle up or down your head to ensure the best fit possible.
• Comes with additional cheek pads and liners for a personalized fit
• Select thinner or thicker pads to achieve a tighter or looser fit according to your preferences

Materials & Care

Note: Avoid exposure to aerosol sprays like bug repellent and sunscreens as they can cause your helmet's finish to peel

Materials: 30% EPS, 11% EVA, 10% polycarbonate, 13% nylon, 11% Pom, 14% Tpee

In the Box

• One thin cheekpad set and one thick cheekpad set
• One thin headliner and one thick headliner
• Removable under visor GoPro mount included

ULTRALIGHT, MOVEMENT-FRIENDLY MTB ELBOW GUARDS

The Enduro D3O® Elbow Guard offers our highest level of protection in an ultra-light, pedal-friendly design. The slip-on design with CE certified D3O® impact-absorbing inserts provides you with minimal restrictions and maximum benefits.

FEATURES

• EN1621-1 Level 1 Elbow including high and low temperature conditions
• CE certified D3O® insert for world leading impact protection
• Moisture wicking, open stretch mesh at back of knee for breathability
• Cordura® fabric offers higher abrasion resistance in key impact areas
• Reinforced skid plate reduces friction with the ground in a sliding fall
• Removable D3O® Insert for easy washing

CONSTRUCTION

• 70% PU / 20% polyester / 10% nylon

ULTRALIGHT, PEDAL-FRIENDLY MTB KNEE GUARDS

The Enduro D3O® Knee Guard offers our highest level of protection in an ultra-light, pedal-friendly design. The slip-on design with CE certified D3O® impact-absorbing inserts provides you with minimal restrictions and maximum benefits. The moisture-wicking, open mesh design behind the knee improves airflow and helps to reduce overheating hot rides.

• EN1621-1 Level 1 Knee including high and low temperature conditions
• CE certified D3O® insert for world leading impact protection
• Moisture wicking, open stretch mesh at back of knee for breathability
• Cordura® fabric offers higher abrasion resistance in key impact areas
• Reinforced skid plate reduces friction with the ground in a sliding fall
• Removable D3O® Insert for easy washing
• 70% PU / 20% polyester / 10% nylon

Lightweight slip-on elbow pads. Shuttling to the top of the mountain isn't always an option, and besides, sometimes it's nice to earn the descent. The Enduro Elbow Guards are lightweight and breathable for maximum comfort. They allow full range of motion thanks to a high-stretch rear panel.

• Slip-on design
• Perforated neoprene on the outside of the arm & stretch material on the back
• Multi-fabric design fits perfectly, keeps you cool & dry and prevents slipping

Lightweight slip-on knee pads. Shuttling to the top of the mountain isn't always an option, and besides, sometimes it's nice to earn the descent. The Enduro Knee Guards are lightweight and breathable for maximum comfort. They allow full range of motion thanks to a high-stretch rear panel.

• Pedal friendly slip on design
• Perforated neoprene on the outside of the arm & stretch material on the back
• Multi-fabric design fits perfectly, keeps you cool & dry and prevents slipping

Lightweight slip-on knee pads. Shuttling to the top of the mountain isn't always an option, and besides, sometimes it's nice to earn the descent. The Enduro Knee Guards are lightweight and breathable for maximum comfort. They allow full range of motion thanks to a high-stretch rear panel.

• Pedal friendly slip on design
• Perforated neoprene on the outside of the arm & stretch material on the back
• Multi-fabric design fits perfectly, keeps you cool & dry and prevents slipping

The Flight Helmet takes the traditional dirt jump lid to all new levels of protection, performance, and comfort. The M9™ Multi-Sector liner uses 9 distinct segments for improved fit, comfort, and superior breathability. Additionally, it is made using our proprietary Varizorb™ Multi Density EPS foam which absorbs, disperses and reduces the force of impact to the head in crashes.

• Dirt jump and trail specific functionality
• M9™ segmented EPS design for improved fit, flexibility and comfort
• Varizorb™ multi-density EPS liner provides improved protection
• Thin ABS shell for reduced weight
• 8 large Big Bore vents for increased airflow and lighter weight
• Heat sealed comfort liner for a clean look and feel

The Flight Pro Helmet takes the traditional skate, dirt jump, and BMX helmet to all-new levels of protection, performance, and comfort. Featuring MIPS™ technology, an impact protection system specifically designed to reduce rotational forces should you crash, the redesigned interior shape of the Flight Pro sits lower on your head to improve overall fit, while the 360 fit system allows you to adjust the comfort even further to your liking. The Fidlock® buckle system clicks open easily for helmet removal, and the helmet comes with two XT2® anti-microbial comfort liners, so you're set for spares when you need 'em. 

E-bike riders, electric scooter, and one-wheel daredevils are covered, too. The Flight Pro Helmet brings that high level of safety to any rider or thrill-seeker looking to level up their protection without sacrificing style in the looks department.

• MIPS™ impact protection system is designed to reduce rotational forces in a crash
• 360 fit system provides a customized, secure fit
• Updated interior shape sits lower on the head for a confidence-inspiring fit
• Includes two XT2® anti-microbial comfort liner sets
• Fidlock® buckle closure system
• EPS, ABS, polyester

Stylish, affordable, MIPS™ trail helmet

The Mainframe MIPS™ Helmet gives you exactly what you're looking for in an affordable helmet: proven safety features combined with easy trail steez. Featuring extended coverage to protect more of your noggin', the proven MIPS™ impact protection will keep your brain safe in the event of a crash by absorbing and redirecting energies and forces that could otherwise damage it. With a lightweight fit system, the Mainframe MIPS Helmet will also keep you cool, and should the sweat stank builds up, you can easily whip the moisture-wicking liner out and run it through the wash. Great protection at a price that'll save your wallet undue stress.

• Proven MIPS™ impact protection system reduces rotational forces in a crash
• Extended coverage for added safety
• Optimized venting with channeled, in-molded EPS provides efficient cooling
• Removable, washable moisture wicking liner
• MIPS™ integrated fit system reduces weight and provides a more comfortable, seamless fit
• Weight: 390 g, (medium)
• EPS, PC, PA, polyester
• Adult Small 51 - 55cm /  Adult Medium 55 - 59cm / Adult Large 59 - 63cm
• (to measure wrap a tape around your head approx.1cm above ears and 2cm above eyebrows).