AGV

AGV X101 [DUST MATT YELLOW/BLACK]

$645.00

Tax included. Shipping calculated at checkout.

Historic shapes and colours meet modern design. The Legends helmets immortalize riders and achievements that will never be forgotten. Comfort, protection and ventilation are key elements of these helmets that meet today's highest standards.

Relive the 70's with the style that dominated adventure riding, the AGV X101 Helmet. A fiberglass constructed shell protects riders on the outside while the suede fabric interior keeps heads comfortable. The chin guard air vent was constructed to include a metal grill preventing dirt and debris from entering the helmet while cool air flows through. This goggle ready helmet also features a removable peak and fully removable cheek pads and helmet liner that are machine washable.

Features:

Fiberglass construction
3 shell sizes
Chin guard air vent
Metal grill under the chin vent protects against dirt and debris
Removable peak
Goggles ready
Double D ring chinstrap
Eco-leather and suede fabric interior
Fully removable and washable liner and cheek pads

AGV

AGV X3000 [GASOLINE MATT BLACK/ORANGE]

$799.00

Tax included. Shipping calculated at checkout.

Historic shapes and colours meet modern design. The Legends helmets immortalize riders and achievements that will never be forgotten. Comfort, protection and ventilation are key elements of these helmets that meet today's highest standards.

The AGV X3000 carries Agostini's signature and includes the contoured chin piece just as he liked it so that he could lean right up against the gas tank. It also features a dual button visor that can be opened with the left hand alone. While the exterior may look the same as it did in the 60's, the X3000 is packed with all the safety, ventilation and comfort you'd expect from a modern day AGV.

Features:

ACF (Advanced Composite Fibre) fibreglass outer shell
3 shell sizes: XS-MS, ML-LG, XL-2XL
Visor on/off air vent with channels hollowed in the shell
Premium interior constructed of genuine leather and suede fabric with an embroidered logo
Removable and washable interior (neck roll not removable)
Double D-ring retention system

BILTWELL

BILTWELL ANZA TEXTILE GLOVE [BLACK OUT]

$80.00

Tax included. Shipping calculated at checkout.

Our newest 100-percent synthetic glove is built for aggressive off-road riding, but that doesn’t mean you can’t wear it on pavement. You can, and we know a bunch of high-performance street riders who do.

Features:

Synthetic suede palm features two-way stretch for a snug, comfortable fit
Three-ply, one-piece vented polyester back and thumb construction for maximum airflow
Flexible thermoplastic rubber knuckle guards and shield logo
Lycra expansion panels in finger joints for added dexterity
Conductive stitching in fingers and thumb lets you operate smart screens
Rugged single- and double-needle polyester stitching throughout
Adjustable wrist wrap with Velcro closure

Form & Function:

By providing a snug fit, our Anza glove reduces the chance of chafing on your palm and fingers. A double-stitched reinforcement panel on the thumb and index finger adds strength to the friction zone between your hands and the grips. Stylish thermoplastic rubber knuckle guards on the back of the glove provide another layer of protection from rocky roost and airborne road debris.

BILTWELL

BILTWELL BAJA TEXTILE GLOVE [BLACK]

$120.00

Tax included. Shipping calculated at checkout.

The ‘80s were the Golden Age of American motocross, when advances in gear design and material technology moved even faster than the legends who wore the stuff. That era and those riders were the inspiration for our new Baja glove.

Features:

Goatskin palm and thumb reinforcement for added toughness in these high friction areas
Synthetic suede palm and thumb construction for a snug, comfortable fit
Stretch polyester construction on ring and pinkie fingers for maximum flexibility
Three-ply woven mesh back panel for ventilation for comfort
Conductive stitching in fingers and thumb lets you operate smart screens
Molded two-ply neoprene wrist wrap with adjustable Velcro closure
Lycra expansion panels in finger joints for added dexterity
Rugged single- and double-needle polyester stitching throughout
Thermoplastic rubber lightning bolt knuckle protector
5mm thick hidden internal neoprene knuckle guard
Goatskin fingertips for extra durability
Fully CE certified

Form & Function:

Modern motocross gloves have evolved into little more than a nylon sock for your hands—very little padding, and virtually no real leather for protection where you need it. Baja gloves buck this trend by combining goatskin reinforcement in friction zones with internal impact protection to create a cool, comfortable glove for aggressive riding on tracks, trails, or tarmac.

BILTWELL

BILTWELL BAJA TEXTILE GLOVE [CHOCOLATE]

$120.00

Tax included. Shipping calculated at checkout.

The ‘80s were the Golden Age of American motocross, when advances in gear design and material technology moved even faster than the legends who wore the stuff. That era and those riders were the inspiration for our new Baja glove.

Features:

Goatskin palm and thumb reinforcement for added toughness in these high friction areas
Synthetic suede palm and thumb construction for a snug, comfortable fit
Stretch polyester construction on ring and pinkie fingers for maximum flexibility
Three-ply woven mesh back panel for ventilation for comfort
Conductive stitching in fingers and thumb lets you operate smart screens
Molded two-ply neoprene wrist wrap with adjustable Velcro closure
Lycra expansion panels in finger joints for added dexterity
Rugged single- and double-needle polyester stitching throughout
Thermoplastic rubber lightning bolt knuckle protector
5mm thick hidden internal neoprene knuckle guard
Goatskin fingertips for extra durability
Fully CE certified

Form & Function:

Modern motocross gloves have evolved into little more than a nylon sock for your hands—very little padding, and virtually no real leather for protection where you need it. Baja gloves buck this trend by combining goatskin reinforcement in friction zones with internal impact protection to create a cool, comfortable glove for aggressive riding on tracks, trails, or tarmac.

BILTWELL

BILTWELL BAJA TEXTILE GLOVE [GREY]

$120.00

Tax included. Shipping calculated at checkout.

The ‘80s were the Golden Age of American motocross, when advances in gear design and material technology moved even faster than the legends who wore the stuff. That era and those riders were the inspiration for our new Baja glove.

Features:

Goatskin palm and thumb reinforcement for added toughness in these high friction areas
Synthetic suede palm and thumb construction for a snug, comfortable fit
Stretch polyester construction on ring and pinkie fingers for maximum flexibility
Three-ply woven mesh back panel for ventilation for comfort
Conductive stitching in fingers and thumb lets you operate smart screens
Molded two-ply neoprene wrist wrap with adjustable Velcro closure
Lycra expansion panels in finger joints for added dexterity
Rugged single- and double-needle polyester stitching throughout
Thermoplastic rubber lightning bolt knuckle protector
5mm thick hidden internal neoprene knuckle guard
Goatskin fingertips for extra durability
Fully CE certified

Form & Function:

Modern motocross gloves have evolved into little more than a nylon sock for your hands—very little padding, and virtually no real leather for protection where you need it. Baja gloves buck this trend by combining goatskin reinforcement in friction zones with internal impact protection to create a cool, comfortable glove for aggressive riding on tracks, trails, or tarmac.

BILTWELL

BILTWELL BAJA TEXTILE GLOVE [RED]

$120.00

Tax included. Shipping calculated at checkout.

The ‘80s were the Golden Age of American motocross, when advances in gear design and material technology moved even faster than the legends who wore the stuff. That era and those riders were the inspiration for our new Baja glove.

Features:

Goatskin palm and thumb reinforcement for added toughness in these high friction areas
Synthetic suede palm and thumb construction for a snug, comfortable fit
Stretch polyester construction on ring and pinkie fingers for maximum flexibility
Three-ply woven mesh back panel for ventilation for comfort
Conductive stitching in fingers and thumb lets you operate smart screens
Molded two-ply neoprene wrist wrap with adjustable Velcro closure
Lycra expansion panels in finger joints for added dexterity
Rugged single- and double-needle polyester stitching throughout
Thermoplastic rubber lightning bolt knuckle protector
5mm thick hidden internal neoprene knuckle guard
Goatskin fingertips for extra durability
Fully CE certified

Form & Function:

Modern motocross gloves have evolved into little more than a nylon sock for your hands—very little padding, and virtually no real leather for protection where you need it. Baja gloves buck this trend by combining goatskin reinforcement in friction zones with internal impact protection to create a cool, comfortable glove for aggressive riding on tracks, trails, or tarmac.

BILTWELL

BILTWELL BELDEN LEATHER GLOVE [BLACK]

$199.00

Tax included. Shipping calculated at checkout.

Our Belden glove features an internal insulation layer with moisture wicking technology to provide maximum protection in cold, wet weather. One-hundred-percent leather construction and an arsenal of other creature comforts makes this Biltwell glove a top choice for Winter riding.

Features:

100% cowhide construction on exterior for durability and abrasion resistance
Suede friction zones with strategic padding for impact protection
Wind- and water-resistant internal thermal barrier for warmth and dryness
Moisture-wicking fleece Lycra liner for comfort
Perforated palm panels increase durability without compromising flex
Padded internal high-impact plastic knuckle guards
Wide elastic Velcro wrist closure with thermoplastic rubber Biltwell pull tab
Smart screen-compatible thumb and fingertips
Fully CE certified

Form & Function:

Belden and its warm-weather sibling Borrego are the most feature-rich, full cowhide gloves in our gear line. Features include a leather exterior for durability and abrasion resistance, and a wide elasticated wrist wrap for adjustability and comfort. Available in a broad range of colours and six sizes from XS to XXL.

BILTWELL

BILTWELL BELDEN LEATHER GLOVE [CHOCOLATE]

$199.00

Tax included. Shipping calculated at checkout.

Our Belden glove features an internal insulation layer with moisture wicking technology to provide maximum protection in cold, wet weather. One-hundred-percent leather construction and an arsenal of other creature comforts makes this Biltwell glove a top choice for Winter riding.

Features:

100% cowhide construction on exterior for durability and abrasion resistance
Suede friction zones with strategic padding for impact protection
Wind- and water-resistant internal thermal barrier for warmth and dryness
Moisture-wicking fleece Lycra liner for comfort
Perforated palm panels increase durability without compromising flex
Padded internal high-impact plastic knuckle guards
Wide elastic Velcro wrist closure with thermoplastic rubber Biltwell pull tab
Smart screen-compatible thumb and fingertips
Fully CE certified

Form & Function:

Belden and its warm-weather sibling Borrego are the most feature-rich, full cowhide gloves in our gear line. Features include a leather exterior for durability and abrasion resistance, and a wide elasticated wrist wrap for adjustability and comfort. Available in a broad range of colours and six sizes from XS to XXL.

BILTWELL

BILTWELL BELDEN LEATHER GLOVE [REDLINE]

$199.00

Tax included. Shipping calculated at checkout.

Our Belden glove features an internal insulation layer with moisture wicking technology to provide maximum protection in cold, wet weather. One-hundred-percent leather construction and an arsenal of other creature comforts makes this Biltwell glove a top choice for Winter riding.

Features:

100% cowhide construction on exterior for durability and abrasion resistance
Suede friction zones with strategic padding for impact protection
Wind- and water-resistant internal thermal barrier for warmth and dryness
Moisture-wicking fleece Lycra liner for comfort
Perforated palm panels increase durability without compromising flex
Padded internal high-impact plastic knuckle guards
Wide elastic Velcro wrist closure with thermoplastic rubber Biltwell pull tab
Smart screen-compatible thumb and fingertips
Fully CE certified

Form & Function:

Belden and its warm-weather sibling Borrego are the most feature-rich, full cowhide gloves in our gear line. Features include a leather exterior for durability and abrasion resistance, and a wide elasticated wrist wrap for adjustability and comfort. Available in a broad range of colours and six sizes from XS to XXL.

BILTWELL

BILTWELL BILTWELL MOTO TEXTILE GLOVE [BLACK/RED]

$60.00

Tax included. Shipping calculated at checkout.

Built for riding and working on motorcycles. No carbon fiber, no fringe, no compromises. Ventilated 100% synthetic construction makes Moto glove perfect for Spring and Summer riding.

Features:

Two-way stretch polyester back panels for comfort
Single layer synthetic leather palm w/ reinforced thumb
Adjustable wrist wrap with Velcro closure and thermoplastic rubber Biltwell shield
Lycra expansion panels in finger joints for enhanced dexterity
Accordion baffles on finger joints for added flexibility
Rugged single- and double-needle polyester stitching throughout
Smart screen thumb and finger tips

Form & Function:

Anyone who has ridden dirt bikes or BMX will appreciate our Moto gloves. Like so many other garage builders and bikeriders, we love the thin palms and snug fit of modern mechanic’s gloves, but can do without their NASCAR-approved colors and graphics. For pure understatement, Biltwell Moto gloves deliver

BILTWELL

BILTWELL BILTWELL MOTO TEXTILE GLOVE [GREY/BLACK]

$60.00

Tax included. Shipping calculated at checkout.

Built for riding and working on motorcycles. No carbon fiber, no fringe, no compromises. Ventilated 100% synthetic construction makes Moto glove perfect for Spring and Summer riding.

Features:

Two-way stretch polyester back panels for comfort
Single layer synthetic leather palm w/ reinforced thumb
Adjustable wrist wrap with Velcro closure and thermoplastic rubber Biltwell shield
Lycra expansion panels in finger joints for enhanced dexterity
Accordion baffles on finger joints for added flexibility
Rugged single- and double-needle polyester stitching throughout
Smart screen thumb and finger tips

Form & Function:

Anyone who has ridden dirt bikes or BMX will appreciate our Moto gloves. Like so many other garage builders and bikeriders, we love the thin palms and snug fit of modern mechanic’s gloves, but can do without their NASCAR-approved colors and graphics. For pure understatement, Biltwell Moto gloves deliver

BILTWELL

BILTWELL BILTWELL MOTO TEXTILE GLOVE [OLIVE/BLACK/TAN]

$60.00

Tax included. Shipping calculated at checkout.

Built for riding and working on motorcycles. No carbon fiber, no fringe, no compromises. Ventilated 100% synthetic construction makes Moto glove perfect for Spring and Summer riding.

Features:

Two-way stretch polyester back panels for comfort
Single layer synthetic leather palm w/ reinforced thumb
Adjustable wrist wrap with Velcro closure and thermoplastic rubber Biltwell shield
Lycra expansion panels in finger joints for enhanced dexterity
Accordion baffles on finger joints for added flexibility
Rugged single- and double-needle polyester stitching throughout
Smart screen thumb and finger tips

Form & Function:

Anyone who has ridden dirt bikes or BMX will appreciate our Moto gloves. Like so many other garage builders and bikeriders, we love the thin palms and snug fit of modern mechanic’s gloves, but can do without their NASCAR-approved colors and graphics. For pure understatement, Biltwell Moto gloves deliver

BILTWELL

BILTWELL BORREGO LEATHER GLOVE [BLACK/CEMENT]

$199.00

Tax included. Shipping calculated at checkout.

Borrego features the same 100% leather construction and comfort/safety features as our Belden model, but eschews thermal insulation in favour of a moisture-wicking fleece half liner for three-season riding.

Features:

100% cowhide construction on exterior for durability and abrasion resistance
Suede friction zones with strategic padding for impact protection
Moisture-wicking fleece Lycra half liner inside for breathability and comfort
Perforated palm panels increase durability without compromising flex
Internal padded high-impact plastic knuckle guards
Wide elastic Velcro wrist closure with thermoplastic rubber Biltwell pull tab
Smart screen-compatible thumb and finger
Fully CE certified

Form & Function:

Borrego and its cold-weather sibling Belden are the most feature-rich, full cowhide gloves in our gear line. Features include a leather exterior for durability and abrasion resistance, and a wide elasticated wrist wrap for adjustability and comfort. Available in a broad range of colours and six sizes from XS to XXL.

BILTWELL

BILTWELL BORREGO LEATHER GLOVE [BLACK]

$199.00

Tax included. Shipping calculated at checkout.

Borrego features the same 100% leather construction and comfort/safety features as our Belden model, but eschews thermal insulation in favour of a moisture-wicking fleece half liner for three-season riding.

Features:

100% cowhide construction on exterior for durability and abrasion resistance
Suede friction zones with strategic padding for impact protection
Moisture-wicking fleece Lycra half liner inside for breathability and comfort
Perforated palm panels increase durability without compromising flex
Internal padded high-impact plastic knuckle guards
Wide elastic Velcro wrist closure with thermoplastic rubber Biltwell pull tab
Smart screen-compatible thumb and finger
Fully CE certified

Form & Function:

Borrego and its cold-weather sibling Belden are the most feature-rich, full cowhide gloves in our gear line. Features include a leather exterior for durability and abrasion resistance, and a wide elasticated wrist wrap for adjustability and comfort. Available in a broad range of colours and six sizes from XS to XXL.

BILTWELL

BILTWELL BORREGO LEATHER GLOVE [CHOCOLATE]

$199.00

Tax included. Shipping calculated at checkout.

Borrego features the same 100% leather construction and comfort/safety features as our Belden model, but eschews thermal insulation in favour of a moisture-wicking fleece half liner for three-season riding.

Features:

100% cowhide construction on exterior for durability and abrasion resistance
Suede friction zones with strategic padding for impact protection
Moisture-wicking fleece Lycra half liner inside for breathability and comfort
Perforated palm panels increase durability without compromising flex
Internal padded high-impact plastic knuckle guards
Wide elastic Velcro wrist closure with thermoplastic rubber Biltwell pull tab
Smart screen-compatible thumb and finger
Fully CE certified

Form & Function:

Borrego and its cold-weather sibling Belden are the most feature-rich, full cowhide gloves in our gear line. Features include a leather exterior for durability and abrasion resistance, and a wide elasticated wrist wrap for adjustability and comfort. Available in a broad range of colours and six sizes from XS to XXL.

BILTWELL

BILTWELL BORREGO LEATHER GLOVE [REDLINE]

$199.00

Tax included. Shipping calculated at checkout.

Borrego features the same 100% leather construction and comfort/safety features as our Belden model, but eschews thermal insulation in favour of a moisture-wicking fleece half liner for three-season riding.

Features:

100% cowhide construction on exterior for durability and abrasion resistance
Suede friction zones with strategic padding for impact protection
Moisture-wicking fleece Lycra half liner inside for breathability and comfort
Perforated palm panels increase durability without compromising flex
Internal padded high-impact plastic knuckle guards
Wide elastic Velcro wrist closure with thermoplastic rubber Biltwell pull tab
Smart screen-compatible thumb and finger
Fully CE certified

Form & Function:

Borrego and its cold-weather sibling Belden are the most feature-rich, full cowhide gloves in our gear line. Features include a leather exterior for durability and abrasion resistance, and a wide elasticated wrist wrap for adjustability and comfort. Available in a broad range of colours and six sizes from XS to XXL.

BILTWELL

BILTWELL BRIDGEPORT TEXTILE GLOVE [BLACK OUT]

$199.00

Tax included. Shipping calculated at checkout.

Like other leather/textile hybrids on the sport bike grid, our Bridgeport gloves feature rugged construction and a racy silhouette. Padding and reinforcement in key impact and friction zones means our most advanced three-season riding glove is ready for business when action heats up.

Features:

Supple goatskin leather palm, fingertips, thumb, and friction zones
Flexible thermoplastic rubber wrist tab with molded impact protection
Anatomically shaped synthetic suede palm panel with Lycra flex zone
Comfortable two-way stretch laminated neoprene wrist panel
Ballistic nylon finger, hand, and knuckle guard panels
Conductive stitching in fingers and thumb lets you operate smart screens
Lycra expansion panels in finger joints for added dexterity
Padded high-impact plastic knuckle guard with three-ply vented panel
Silicone traction logo on palm
Molded plastic finger vents
Fully CE certified

Form & Function:

Building a premium glove is easier said than done. How do we know? Look at our competition. Most of the gloves in Bridgeport’s performance category look like props in a low-budget sci-fi movie. Bridgeport eschews over-the-top aesthetics to deliver comfortable, feature-packed protection for people who take riding seriously.

BILTWELL

BILTWELL BRIDGEPORT TEXTILE GLOVE [CHOCOLATE]

$199.00

Tax included. Shipping calculated at checkout.

Like other leather/textile hybrids on the sport bike grid, our Bridgeport gloves feature rugged construction and a racy silhouette. Padding and reinforcement in key impact and friction zones means our most advanced three-season riding glove is ready for business when action heats up.

Features:

Supple goatskin leather palm, fingertips, thumb, and friction zones
Flexible thermoplastic rubber wrist tab with molded impact protection
Anatomically shaped synthetic suede palm panel with Lycra flex zone
Comfortable two-way stretch laminated neoprene wrist panel
Ballistic nylon finger, hand, and knuckle guard panels
Conductive stitching in fingers and thumb lets you operate smart screens
Lycra expansion panels in finger joints for added dexterity
Padded high-impact plastic knuckle guard with three-ply vented panel
Silicone traction logo on palm
Molded plastic finger vents
Fully CE certified

Form & Function:

Building a premium glove is easier said than done. How do we know? Look at our competition. Most of the gloves in Bridgeport’s performance category look like props in a low-budget sci-fi movie. Bridgeport eschews over-the-top aesthetics to deliver comfortable, feature-packed protection for people who take riding seriously.

BILTWELL

BILTWELL BRIDGEPORT TEXTILE GLOVE [GREY]

$199.00

Tax included. Shipping calculated at checkout.

Like other leather/textile hybrids on the sport bike grid, our Bridgeport gloves feature rugged construction and a racy silhouette. Padding and reinforcement in key impact and friction zones means our most advanced three-season riding glove is ready for business when action heats up.

Features:

Supple goatskin leather palm, fingertips, thumb, and friction zones
Flexible thermoplastic rubber wrist tab with molded impact protection
Anatomically shaped synthetic suede palm panel with Lycra flex zone
Comfortable two-way stretch laminated neoprene wrist panel
Ballistic nylon finger, hand, and knuckle guard panels
Conductive stitching in fingers and thumb lets you operate smart screens
Lycra expansion panels in finger joints for added dexterity
Padded high-impact plastic knuckle guard with three-ply vented panel
Silicone traction logo on palm
Molded plastic finger vents
Fully CE certified

Form & Function:

Building a premium glove is easier said than done. How do we know? Look at our competition. Most of the gloves in Bridgeport’s performance category look like props in a low-budget sci-fi movie. Bridgeport eschews over-the-top aesthetics to deliver comfortable, feature-packed protection for people who take riding seriously.

BILTWELL

BILTWELL BRIDGEPORT TEXTILE GLOVE [TAN]

$199.00

Tax included. Shipping calculated at checkout.

Like other leather/textile hybrids on the sport bike grid, our Bridgeport gloves feature rugged construction and a racy silhouette. Padding and reinforcement in key impact and friction zones means our most advanced three-season riding glove is ready for business when action heats up.

Features:

Supple goatskin leather palm, fingertips, thumb, and friction zones
Flexible thermoplastic rubber wrist tab with molded impact protection
Anatomically shaped synthetic suede palm panel with Lycra flex zone
Comfortable two-way stretch laminated neoprene wrist panel
Ballistic nylon finger, hand, and knuckle guard panels
Conductive stitching in fingers and thumb lets you operate smart screens
Lycra expansion panels in finger joints for added dexterity
Padded high-impact plastic knuckle guard with three-ply vented panel
Silicone traction logo on palm
Molded plastic finger vents
Fully CE certified

Form & Function:

Building a premium glove is easier said than done. How do we know? Look at our competition. Most of the gloves in Bridgeport’s performance category look like props in a low-budget sci-fi movie. Bridgeport eschews over-the-top aesthetics to deliver comfortable, feature-packed protection for people who take riding seriously.

BILTWELL

BILTWELL EXFIL-0 2.0 TOOL ROLL [BLACK]

$100.00

Tax included. Shipping calculated at checkout.

EXFIL® every-day carry gear just got better. Big and strong enough to hold a full set of motorcycle service essentials, yet still compact enough to fit inside our EXFIL-7 bag. The improved, EXFIL-0 version 2.0 is the perfect complement to every self-reliant bike rider's kit.

Features:

Highly abrasion-resistant 600 denier polyester nylon outer shell
Heavy-duty hi-vis orange nylon interior lining
2 enclosed translucent rip-stop compartments
1 larger "junk drawer" pocket
5 sleeves for wrenches
Adjustable G-hook nylon strap closure
Closed dimensions 24cm x 18cm; 47cm long when opened flat
Tools shown for illustration only—not included

Form & Function:

We took an already functional and popular tool kit and made it even better. We found the translucent rip-stop pockets better for holding sockets than the old elstic band method of construction. Then we built in two wider slots that work great for pliers or wire cutters. The top flap got another rip-stop pocket. The largest zippered pocket inside is perfect for holding bailing wire, spark plugs, screwdrivers, jet kits and other service essentials. To close the unit, simply roll it like a burrito, fasten the G-hook onto one of the external loops, and pull the nylon strap tight. MOLLE system on the exterior provides options for storage and expansion.

BILTWELL

BILTWELL EXFIL-18 SADDLEBAGS [BLACK]

$565.00

Tax included. Shipping calculated at checkout.

Introducing the latest in our line of EXFIL® motorcycle gear. The new EXFIL-18’s visual similarity to our decade old EXFIL-7 design is no accident. This new set of saddlebags handles business with the same smart design and rugged construction as every bag in our moto luggage arsenal. As its name implies, each EXFIL-18 saddlebag holds three six-packs of 350ml (12-ounce) cans. Like our EXFIL-36, EXFIL-18 saddlebags are a universal fit system that hangs under the seat and over the rear fender on an easy-to-install yoke with Velcro adjustment.

Features:

UV-treated 1680-denier ballistic nylon exterior resists moisture and fading
Strong, flexible EVA foam panels inside main compartment add structure and durability
MOLLE system on exterior provides options for attaching accessories and extra gear
One main and two secondary compartments are secured with rustproof nylon zippers
High-vis orange interior lining makes spotting contents easier
Two-piece mounting yoke with adjustable Velcro panel fastens to both bags with extra-large, heavy-duty nylon zippers
Universal fit—works great with a wide variety of aftermarket saddlebag supports
Multiple D-rings and MOLLE points on bag exterior provide options for carabiners, bungee cords, etc.
Hidden cable port into main compartment—perfect for charging devices
Waterproof nylon rain covers with elastic gathers and drawstring closure provide extra protection in extreme conditions

Form & Function:

EXFIL-18 saddlebags are just the right size for daily use. UV-treated to last thousands of hours in the harsh sun and built with mil-spec quality materials. Of course they come with waterproof covers and the bright orange interior that makes finding your stuff easier. These bags are universal-fit, but keep in mind you’ll need to add some generic saddlebag mounts for your particular bike to keep the bags away from your rear wheel. The compact size (34cm wide by 22cm tall x 19 deep) fits on most bikes without relocating the turn signals, but make sure to measure your motorcycle first! Installation note: Motorcycle exhaust is super hot! If your exhaust exits directly into or under these bags, even though the bottoms are reinforced with heat-resistant material, there is a chance it can scorch the bag or melt the contents inside. Rain covers melt or catch fire easier than the ballistic nylon due to the rubber coating that makes them waterproof, so please keep that in mind. Also, if you install the bags empty, check them again after you’ve loaded them with gear. You may need to adjust the yoke or other parts of your mounting procedure to keep the bags away from exhaust heat. It’s a good idea to check all luggage every time you stop, just to make sure things haven’t shifted while you were riding.

BILTWELL

BILTWELL EXFIL-2 MINI TANK BAG [BLACK]

$85.00

Tax included. Shipping calculated at checkout.

Our new EXFIL-2 Mini Tank Bag might just be the most convenient piece of kit we’ve made yet. It’s compact size makes it easy to live with and it holds a surprising amount of stuff. A charging cord easily slips through the hidden seam in the front of the bag and the lid is crystal clear and is touch-screen sensitive so you can use your smart phone.

Features:

UV-treated 1680D denier ballistic nylon exterior
Main compartment holds two 12-ounce cans
Lid features fleece-lined phone slot with touch-friendly clear panel for smart phone operation
Hi-vis orange nylon interior makes spotting contents easier
Hidden seam in front for routing charging cables
Carrying handle provides easy portage
Dimensions: 20cm long x 14cm wide (front) 11.4cm wide (rear) x 10cm tall (front) x 5cm tall (rear)

Form & Function:

Three super-powerful magnets are mounted inside the bottom of this bag. These magnets securely attach the EXFIL-2 mini tank bag to your steel tank in an instant, no straps required. Of course, friction between the bag and your gas tank is unavoidable—light scuffing to the paint can and will occur, so keep the tank and bag clean and free from debris.

BILTWELL

BILTWELL EXFIL-3 BAG [BLACK]

$150.00

Tax included. Shipping calculated at checkout.

We designed our smallest EXFIL® bag to fit on motorcycles with tall risers or T-bars, but its MOLLE mounting system lets you attach this bag practically anywhere using the six Velcro straps included with each unit.

Features:

UV-treated, PVC-coated 500 denier tarpaulin exterior is water resistant and tough
Semi-sealed nylon zippers on exterior for added rain resistance
MOLLE loop system on front panel for mounting and expansion
Hi-vis orange nylon interior makes finding contents easier
Thermal-welded seams for added weather-proofing
Internal organizing panels are removable to customize the bag's function and volume
Six Velcro mounting straps included
Dimensions: 17cm wide x 25cm tall x 9cm deep

Install Tips:

Our EXFIL-3 is the glove box and center console few motorcycles have, but the one every bike needs. Highly weather- and water-resistant to protect your gear from exposure, but not 100% watertight. Lots of MOLLE attachment points for carabiners, Velcro straps and expansion with similar equipment. Heavily padded interior features two removable panels, both with storage pockets and pouches to keep keys, documents and other essentials tight and tidy.

BILTWELL

BILTWELL EXFIL-36 SADDLEBAGS [BLACK]

$949.00

Tax included. Shipping calculated at checkout.

The biggest EXFIL® bags we've made yet! Our first full-sized saddlebag system is the last word in utility and performance for motorcycle adventure. EXFIL-36 saddlebags feature hand-crafted construction and ballistic-grade materials—everything from heavy-duty polyester nylon and PVC-treated synthetics to heat-resistant canvas, nylon MOLLE straps, and molded quick-release buckles. Each hand-crafted bag’s main compartment will hold 36 350ml (12-ounce) cans. That’s three cases for the pair—plenty of capacity for your next long-term bugout. Like every piece of moto luggage in our EXFIL® line, EXFIL-36 saddlebags are engineered for easy installation and universal fit on a wide range of motorcycles.

Features:

Universal fit—works great with a wide variety of aftermarket saddlebag supports
UV-treated 1680-denier ballistic nylon exterior resists moisture and fading
PVC-treated waterproof security flap over main compartment closes with 1.5-inch wide (36mm) reflective polyester straps and Duraflex quick-release buckles
Extra-large 38cm long x 18cm wide PVC-treated main compartment door features double zippers with single paracord pull for speedy operation
MOLLE system on exterior provides options for attaching accessories and extra gear
Two-piece mounting yoke with adjustable Velcro panel fastens to both bags with heavy-duty nylon zippers
Bag bottoms reinforced with heat-resistant, heavyweight canvas panels
Hidden cable port into main compartment—perfect for charging devices
Multiple D-rings, MOLLE points, and high-strength nylon loops on exterior provide options for carabiners, bungee cords, etc.
Waterproof nylon rain covers with elastic gathers and drawstring closure provide extra protection in extreme conditions

Form & Function:

Who says you can’t take it with you? These saddlebags are big enough for just about any motorcycle adventure. Multiple pockets inside, a fleece-lined easy-access one on the outside and plenty of MOLLE and tie-down loops to attach extra gear to the outside makes the EXFIL-36 saddlebags unique. These bags are universal-fit, but keep in mind you’ll need to add some generic saddlebag mounts for your particular bike to keep the bags away from your rear wheel. As with most saddlebags, relocating the turn signals will help keep the bags tucked in and tidy. Installation note: Motorcycle exhaust is super hot! If your exhaust exits directly into or under these bags, even though the bottoms are reinforced with heat-resistant material, there is a chance it can scorch the bag or melt the contents inside. Rain covers melt or catch fire easier than the ballistic nylon due to the rubber coating that makes them waterproof, so please keep that in mind. Also, if you install the bags empty, check them again after you’ve loaded them with gear. You may need to adjust the yoke or other parts of your mounting procedure to keep the bags away from exhaust heat. It’s a good idea to check all luggage every time you stop, just to make sure things haven’t shifted while you were riding.

BILTWELL

BILTWELL EXFIL-48 BACKPACK [BLACK]

$329.00

Tax included. Shipping calculated at checkout.

Like all EXFIL® gear, the 48 was designed by bikeriders for bikeriders. Features include compression straps that do double duty as mounting straps, so you can fasten your backpack to the sissy bar to give your shoulders a break on long rides. Packed with enough storage capacity to gobble up 48 350ml cans of your favourite barley juice.

Features:

One main and two secondary compartments, each lined with hi-vis orange nylon for speedy contents ID
Lower exterior compartment boasts two zippered pouches and a treated nylon tool caddy
Upper exterior compartment features a zipper pouch for keys and incidentals
Heavy-duty nylon zippers with easy-grab pulls throughout
1680 denier ballistic nylon outer chassis with PVC coating for moisture resistance and durability
PVC-treated heavy-duty bottom and lower side panels resist water and dirt
Woven nylon cinch and mounting straps with reflective detailing
Molded nylon buckles on cinch straps for speedy mounting on sissy bars
Six heavy-duty, bar-tacked lashing points for loading and mounting options
Padded tablet/laptop pocket inside main compartment
Padded shoulder straps and BioFoam back with ventilated panels for airflow and comfort
Dimensions: 29cm wide x 46cm tall x 25cm deep

Form & Function:

We invested many hours of R&D on this EXFIL® unit; we wanted our first backpack to be the last one you ever need. One main and two secondary compartments hold 48 350ml / 12-ounce beverage cans—that's two cases of cold beer to get the party started if that's your mission. The lower secondary zipper compartment has a PVC-treated tool caddy and an internal zipper pouch to hold wrenches and small gear securely. The top secondary compartment houses an internal zipper pouch, and all three compartments have hi-vis orange nylon lining to make spotting contents easy. The padded shoulder straps feature an adjustable sternum strap to stabilize heavy loads. Cinch straps around EXFIL-48's perimeter do two things: compress loads for greater stability, and fasten the bag to your sissy bar when it's time to hit the highway.

BILTWELL

BILTWELL EXFIL-60 2.0 BAG [BLACK]

$409.00

Tax included. Shipping calculated at checkout.

Right in the middle of our line of EXFIL® gear, this rugged moto-pack is right-sized for nearly any adventure. Features include a large main compartment and an expandable flap that can quickly hold a bedroll or outer layer. Universal mounting is easy with three built-in compression straps and two additional tie-down points. Version 2.0 upgrades include improved cargo flap with Velcro loop with laser-cut MOLLE on the outside and rugged rip-stop pocket on the inside. New elastic shock cord on sides of cargo flap help keep gear tidy.

Features:

UV-treated, 1680 denier ballistic-grade polyester nylon construction throughout
PVC treatment on exterior panels for added weather resistance
Roll-top closure with reinforced nylon quick-release buckles keeps contents sealed tight
Three 1.5-inch wide removable mounting straps with reflective stitching offer mounting options and security
Seven rows of laser-cut MOLLE webbing for mounting and secondary gear attachment
Rugged SBS synthetic, weather-resistant zippers with knotted nylon cord pulls
Removable padded nylon shoulder strap is adjustable, fastens quickly for portage
Interior volume holds 60 350ml (12-ounce) cans
Stuffed, closed dimensions: 45cm tall x 36cm wide x 23cm deep

Form & Function:

The EXFIL-60 is a comfortable size for all bikes, smaller trips or riders who like to pack a little lighter. The tarpaulin flap on the front features seven rows of MOLLE and a rip-stop pocket on the inside. This flap is adjustable without disturbing the attachment points on the bag, so it’s perfect for stashing an outer layer, bed roll etc.

BILTWELL

BILTWELL EXFIL-65 2.0 BAG [BLACK]

$189.00

Tax included. Shipping calculated at checkout.

Maybe the most versatile bag in our line of EXFIL® gear. 100% waterproof/dustproof and just the right size, the EXFIL-65 is built for any adventure. It works mounted vertically on a sissy bar, or laid down on or across a luggage rack. Multiple tie-down points on each side and now eleven rows of laser-cut MOLLE give plenty of options for add-ons and mounting. Now “FVT” (Fart Valve Technology) allows air out of the bag for maximum compression.

Features:

UV-treated 500 sides and 1000-denier bottom is PVC-coated tarpaulin and is 100% waterproof
Roll-top closure with reinforced nylon quick-release buckles keeps contents sealed tight
New Fart Value Technology releases air from inside the bag
Double-thick bottom construction with external PVC coating for greater durability
2-inch-wide, ballistic-grade polyester nylon loops and box-stitched handles on sides feature woven reflective thread for better nighttime visibility
11 rows of MOLLE for mounting accessories
Universal fitment for motorcycles, UTVs, 4x4s, auto roof racks, etc.
Interior volume can hold 65 350ml (12-ounce) cans
Stuffed and closed dimensions: 56cm tall x 30cm wide

Form & Function:

The EXFIL-65 is just the right size to swallow up camping gear or clothing and keep it completely protected from the elements. We don't really think you should put 65 beers in it, but that's how we measure the interior volume instead of litres. With rugged, reflective built-in handles and loops, it is easy to mount in just about any configuration. The laser-cut MOLLE on the thermally welded front panel allow for adding accessories or simply clipping on a carabiner with extra junk like camp cups, flip-flops or whatever.

BILTWELL

BILTWELL EXFIL-7 BAG [OLIVE DRAB GREEN]

$150.00

Tax included. Shipping calculated at checkout.

This is the bag that started our EXFIL® motorcycle luggage revolution. In military parlance "EXFIL®" means to leave in a rapid, organized fashion—the way every smart bikerider likes to ride. The number means this EXFIL® bag holds seven 350ml beer cans, and is a naming convention that carries throughout our moto luggage line.

Features:

MOLLE system on exterior lets you attach and expand this bag with other bags and accessories
Rugged, rust-free nylon zippers throughout
Duraflex quick-release buckles with adjustable nylon straps for speedy installation
UV-treated, 1680 denier polyester nylon construction
PVC coated synthetic mounting straps with nickel-plated stainless buckles
External chassis panels are PVC backed for added water resistance
Interior volume holds seven 350ml / 12oz cans
Hi-vis orange nylon interior makes spotting contents easier
One main and three secondary pockets offer plenty of room for gear, maps, and other essentials

Install Tips:

Like all our luggage designs, you can mount EXFIL-7 anywhere. On our personal bikes we've mounted over-stuffed EXFIL-7's on the down tube, over the headlight on tall risers, and on both sides of the sissy bar. A pair of EXFIL-7's will hang perfectly on H-D fender struts to create a set of mini saddle bags. EXFIL-7's MOLLE system and reinforced PVC straps make all these options possible. Once mounted, EXFIL-7 gobbles up personal gear like wallets, pocket knives, phones, tools and other stuff to become the glove box most motorcycles need but don't have.

BILTWELL

BILTWELL EXFIL-80 2.0 BAG [BLACK]

$619.00

Tax included. Shipping calculated at checkout.

The most well-travelled bag in our line of EXFIL® moto luggage. The 2.0 version of this robust rucksack is custom engineered to hold everything you need for multi-day or overnight motorcycle adventure. New features include a more rugged built-in tool pouch, larger padded backrest, larger straps and buckles, improved rip-stop pockets and the magic pass-thru that lets you unzip and fold down the internal backrest to get inside the bag without unbuckling it from your motorcycle.

Features:

UV-treated, 1680 denier ballistic-grade polyester nylon construction throughout
PVC treatment on exterior panels for added weather resistance
Roll-top with larger 38mm reinforced nylon quick-release buckles keeps contents sealed tight
Nylon hi-vis orange lining in main and secondary compartments helps you see your gear
Fixed, collapsible, internal "laundry bag" divider
Three 38mm wide removable mounting straps with reflective stitching offer mounting options and security
Padded PVC-coated backrest padded for comfort
Removable pouch inside secondary compartment holds wrenches and incidentals
Seven wrench sleeves, plus three translucent rip-stop pouches
Zipper pocket on bottom of bag holds weather-resistant cover that pulls over the loaded bag for 100% waterproof protection
PVC-coated nylon bottom panel is impervious to water
Five rows of "LASER MOLLE" webbing for mounting and secondary gear attachment on each side
Rugged SBS synthetic zippers with knotted and silenced nylon cord pulls
Removable padded nylon shoulder strap is adjustable, fastens quickly for portage
D-loops on bottom of each side and additional tie down points for security
Interior volume holds 80 350ml (12-ounce) cans (51-litre capacity)
Stuffed, closed dimensions: 50cm tall x 36cm wide x 30cm deep

Form & Function:

By riders, for riders. We over-engineered our most popular full-sized EXFIL® bag to fasten tightly on any bike with a sissy bar or backrest, but this super-tough bag looks and fits great on virtually any motorcycle. EXFIL-80's integrated tool compartment keeps roadside repair essentials organized and can be opened without removing the bag from your motorcycle. The tool organizer panel can be unzipped and folded down for access to the main compartment.

BILTWELL

BILTWELL GRINGO R22.06 [GLOSS BLACK WHITE FLAMES]

$549.00

Tax included. Shipping calculated at checkout.

Gringo has been a top choice among modern bikeriders since we introduced it a decade ago. The latest iteration of our classic full-face helmet now meets the European Union’s more robust ECE R22.06 safety standards to provide a higher level of rider protection.

Features:

Injection-molded ABS outer shell is lightweight and highly resistant to impacts
New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
Molded urethane chin bar pad dissipates energy during front impact
Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
Molded EPS ear pockets fit select aftermarket audio accessories
US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. To meet Europe's new, more robust standards for impact attenuation and rider safety, ECE R22.06-certified helmets may fit you more snugly than similar US DOT-compliant models. NOTE: We offer accessory cheek pads so you can fine-tune the comfort of your helmet against your cheeks and face for a perfect fit.

BILTWELL

BILTWELL GRINGO R22.06 [METALLIC GRAPE]

$499.00

Tax included. Shipping calculated at checkout.

Gringo has been a top choice among modern bikeriders since we introduced it a decade ago. The latest iteration of our classic full-face helmet now meets the European Union’s more robust ECE R22.06 safety standards to provide a higher level of rider protection.

Features:

Injection-molded ABS outer shell is lightweight and highly resistant to impacts
New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
Molded urethane chin bar pad dissipates energy during front impact
Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
Molded EPS ear pockets fit select aftermarket audio accessories
US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. To meet Europe's new, more robust standards for impact attenuation and rider safety, ECE R22.06-certified helmets may fit you more snugly than similar US DOT-compliant models. NOTE: We offer accessory cheek pads so you can fine-tune the comfort of your helmet against your cheeks and face for a perfect fit.

BILTWELL

BILTWELL GRINGO R22.06 [METALLIC UGLY GOLD]

$499.00

Tax included. Shipping calculated at checkout.

Gringo has been a top choice among modern bikeriders since we introduced it a decade ago. The latest iteration of our classic full-face helmet now meets the European Union’s more robust ECE R22.06 safety standards to provide a higher level of rider protection.

Features:

Injection-molded ABS outer shell is lightweight and highly resistant to impacts
New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
Molded urethane chin bar pad dissipates energy during front impact
Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
Molded EPS ear pockets fit select aftermarket audio accessories
US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. To meet Europe's new, more robust standards for impact attenuation and rider safety, ECE R22.06-certified helmets may fit you more snugly than similar US DOT-compliant models. NOTE: We offer accessory cheek pads so you can fine-tune the comfort of your helmet against your cheeks and face for a perfect fit.

BILTWELL

BILTWELL GRINGO S R22.06 [DOVE BLUE]

$549.00

Tax included. Shipping calculated at checkout.

An old favorite but now with a new fit and new features. Our latest Gringo S helmet now meets the new European ECE 22.06 regs. The shield mechanism now uses the same anti-rattle closure featured on our Lane Splitter helmets. Three shell sizes replace the previous two for improved fit and comfort.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved. We will have replacement shields in different tints available soon!

Features:

Injection-molded ABS outer shell is lightweight and highly resistant to impacts
New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
Molded urethane chin bar pad dissipates energy during front impact
Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
Molded EPS ear pockets fit select aftermarket audio accessories
US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

BILTWELL

BILTWELL GRINGO S R22.06 [FLAT BLACK]

$549.00

Tax included. Shipping calculated at checkout.

An old favorite but now with a new fit and new features. Our latest Gringo S helmet now meets the new European ECE 22.06 regs. The shield mechanism now uses the same anti-rattle closure featured on our Lane Splitter helmets. Three shell sizes replace the previous two for improved fit and comfort.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved. We will have replacement shields in different tints available soon!

Features:

Injection-molded ABS outer shell is lightweight and highly resistant to impacts
New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
Molded urethane chin bar pad dissipates energy during front impact
Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
Molded EPS ear pockets fit select aftermarket audio accessories
US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

BILTWELL

BILTWELL GRINGO S R22.06 [GLOSS BLACK FLAMES]

$599.00

Tax included. Shipping calculated at checkout.

An old favorite but now with a new fit and new features. Our latest Gringo S helmet now meets the new European ECE 22.06 regs. The shield mechanism now uses the same anti-rattle closure featured on our Lane Splitter helmets. Three shell sizes replace the previous two for improved fit and comfort.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved. We will have replacement shields in different tints available soon!

Features:

Injection-molded ABS outer shell is lightweight and highly resistant to impacts
New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
Molded urethane chin bar pad dissipates energy during front impact
Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
Molded EPS ear pockets fit select aftermarket audio accessories
US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

BILTWELL

BILTWELL GRINGO S R22.06 [GLOSS BLACK]

$549.00

Tax included. Shipping calculated at checkout.

An old favorite but now with a new fit and new features. Our latest Gringo S helmet now meets the new European ECE 22.06 regs. The shield mechanism now uses the same anti-rattle closure featured on our Lane Splitter helmets. Three shell sizes replace the previous two for improved fit and comfort.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved. We will have replacement shields in different tints available soon!

Features:

Injection-molded ABS outer shell is lightweight and highly resistant to impacts
New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
Molded urethane chin bar pad dissipates energy during front impact
Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
Molded EPS ear pockets fit select aftermarket audio accessories
US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

BILTWELL

BILTWELL GRINGO S R22.06 [GLOSS WHITE GLOSS BLACK TRACKER]

$599.00

Tax included. Shipping calculated at checkout.

An old favorite but now with a new fit and new features. Our latest Gringo S helmet now meets the new European ECE 22.06 regs. The shield mechanism now uses the same anti-rattle closure featured on our Lane Splitter helmets. Three shell sizes replace the previous two for improved fit and comfort.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved. We will have replacement shields in different tints available soon!

Features:

Injection-molded ABS outer shell is lightweight and highly resistant to impacts
New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
Molded urethane chin bar pad dissipates energy during front impact
Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
Molded EPS ear pockets fit select aftermarket audio accessories
US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

BILTWELL

BILTWELL GRINGO S R22.06 [METALLIC CHERRY RED]

$549.00

Tax included. Shipping calculated at checkout.

An old favorite but now with a new fit and new features. Our latest Gringo S helmet now meets the new European ECE 22.06 regs. The shield mechanism now uses the same anti-rattle closure featured on our Lane Splitter helmets. Three shell sizes replace the previous two for improved fit and comfort.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved. We will have replacement shields in different tints available soon!

Features:

Injection-molded ABS outer shell is lightweight and highly resistant to impacts
New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
Molded urethane chin bar pad dissipates energy during front impact
Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
Molded EPS ear pockets fit select aftermarket audio accessories
US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

BILTWELL

BILTWELL GRINGO S R22.06 [VINTAGE DESERT SPECTRUM]

$599.00

Tax included. Shipping calculated at checkout.

An old favorite but now with a new fit and new features. Our latest Gringo S helmet now meets the new European ECE 22.06 regs. The shield mechanism now uses the same anti-rattle closure featured on our Lane Splitter helmets. Three shell sizes replace the previous two for improved fit and comfort.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved. We will have replacement shields in different tints available soon!

Features:

Injection-molded ABS outer shell is lightweight and highly resistant to impacts
New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
Molded urethane chin bar pad dissipates energy during front impact
Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
Molded EPS ear pockets fit select aftermarket audio accessories
US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

BILTWELL

BILTWELL GRINGO S [FLAT BLACK]

$499.00

Tax included. Shipping calculated at checkout.

Our ECE-certified Gringo S boasts fit, finish and safety technology identical to its full-face sibling, but features a CE-certified flip-up face shield for added safety and riding comfort.

Features:

Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
Molded urethane chin bar pad dissipates energy from frontal impacts
Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
CE-certified polycarbonate shield includes anti-fog and anti-scratch treatments for safety and durability
Rugged shield hinge hardware with robust detents allows you to open the shield at slow speeds for increased airflow
Molded recesses inside EPS designed to accept various aftermarket audio and communication components

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

BILTWELL

BILTWELL GRINGO S [FLAT CHOCOLATE]

$499.00

Tax included. Shipping calculated at checkout.

Our ECE-certified Gringo S boasts fit, finish and safety technology identical to its full-face sibling, but features a CE-certified flip-up face shield for added safety and riding comfort.

Features:

Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
Molded urethane chin bar pad dissipates energy from frontal impacts
Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
CE-certified polycarbonate shield includes anti-fog and anti-scratch treatments for safety and durability
Rugged shield hinge hardware with robust detents allows you to open the shield at slow speeds for increased airflow
Molded recesses inside EPS designed to accept various aftermarket audio and communication components

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

BILTWELL

BILTWELL GRINGO S [GLOSS BLACK]

$499.00

Tax included. Shipping calculated at checkout.

Our ECE-certified Gringo S boasts fit, finish and safety technology identical to its full-face sibling, but features a CE-certified flip-up face shield for added safety and riding comfort.

Features:

Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
Molded urethane chin bar pad dissipates energy from frontal impacts
Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
CE-certified polycarbonate shield includes anti-fog and anti-scratch treatments for safety and durability
Rugged shield hinge hardware with robust detents allows you to open the shield at slow speeds for increased airflow
Molded recesses inside EPS designed to accept various aftermarket audio and communication components

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

BILTWELL

BILTWELL GRINGO SV [FLAT BLACK]

$699.00

Tax included. Shipping calculated at checkout.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

Injection-molded ABS outer shell is lightweight and highly resistant to impacts
Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
Molded urethane chin bar pad dissipates energy during front impact
Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
Molded EPS ear pockets fit select aftermarket audio accessories
ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

BILTWELL

BILTWELL GRINGO SV [GLOSS BLACK]

$699.00

Tax included. Shipping calculated at checkout.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

Injection-molded ABS outer shell is lightweight and highly resistant to impacts
Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
Molded urethane chin bar pad dissipates energy during front impact
Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
Molded EPS ear pockets fit select aftermarket audio accessories
ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

BILTWELL

BILTWELL GRINGO SV [GLOSS STORM GREY]

$699.00

Tax included. Shipping calculated at checkout.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

Injection-molded ABS outer shell is lightweight and highly resistant to impacts
Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
Molded urethane chin bar pad dissipates energy during front impact
Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
Molded EPS ear pockets fit select aftermarket audio accessories
ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

BILTWELL

BILTWELL GRINGO SV [GLOSS WHITE]

$699.00

Tax included. Shipping calculated at checkout.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmetÂ with world-classÂ comfort, function, and style.

Features:

Injection-molded ABS outer shell is lightweight and highly resistant to impacts
Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
Molded urethane chin bar pad dissipates energy during front impact
Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
Molded EPS ear pockets fit select aftermarket audio accessories
ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

BILTWELL

BILTWELL GRINGO SV [METALLIC CHERRY RED]

$699.00

Tax included. Shipping calculated at checkout.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

Injection-molded ABS outer shell is lightweight and highly resistant to impacts
Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
Molded urethane chin bar pad dissipates energy during front impact
Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
Molded EPS ear pockets fit select aftermarket audio accessories
ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

BILTWELL

BILTWELL GRINGO SV [METALLIC GRAPE]

$699.00

Tax included. Shipping calculated at checkout.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmetÂ with world-classÂ comfort, function, and style.

Features:

Injection-molded ABS outer shell is lightweight and highly resistant to impacts
Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
Molded urethane chin bar pad dissipates energy during front impact
Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
Molded EPS ear pockets fit select aftermarket audio accessories
ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

BILTWELL

BILTWELL GRINGO SV [METALLIC SEA FOAM]

$699.00

Tax included. Shipping calculated at checkout.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

Injection-molded ABS outer shell is lightweight and highly resistant to impacts
Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
Molded urethane chin bar pad dissipates energy during front impact
Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
Molded EPS ear pockets fit select aftermarket audio accessories
ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

BILTWELL

BILTWELL GRINGO SV [METALLIC SIERRA GREEN]

$699.00

Tax included. Shipping calculated at checkout.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

Injection-molded ABS outer shell is lightweight and highly resistant to impacts
Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
Molded urethane chin bar pad dissipates energy during front impact
Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
Molded EPS ear pockets fit select aftermarket audio accessories
ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

BILTWELL

BILTWELL GRINGO [FLAT BLACK]

$399.00

Tax included. Shipping calculated at checkout.

Gringo takes its '60s motorsport aesthetic and elevates it to modern ECE R22.05 motorcycle standards—the European test protocol recognized by leading helmet makers and independent safety labs as the toughest in the world.

Features:

Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
Molded urethane chin bar pad dissipates energy during frontal impacts
Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
Molded recesses inside EPS designed to accept various aftermarket audio and communication components
ECE R22.05 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

BILTWELL

BILTWELL GRINGO [FLAT FACTORY BLACK]

$399.00

Tax included. Shipping calculated at checkout.

Gringo takes its '60s motorsport aesthetic and elevates it to modern ECE R22.05 motorcycle standards—the European test protocol recognized by leading helmet makers and independent safety labs as the toughest in the world.

Features:

Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
Molded urethane chin bar pad dissipates energy during frontal impacts
Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
Molded recesses inside EPS designed to accept various aftermarket audio and communication components
ECE R22.05 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

BILTWELL

BILTWELL GRINGO [GLOSS BLACK SPECTRUM]

$399.00

Tax included. Shipping calculated at checkout.

Gringo takes its '60s motorsport aesthetic and elevates it to modern ECE R22.05 motorcycle standards—the European test protocol recognized by leading helmet makers and independent safety labs as the toughest in the world.

Features:

Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
Molded urethane chin bar pad dissipates energy during frontal impacts
Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
Molded recesses inside EPS designed to accept various aftermarket audio and communication components
ECE R22.05 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

BILTWELL

BILTWELL GRINGO [GLOSS BLACK]

$399.00

Tax included. Shipping calculated at checkout.

Gringo takes its '60s motorsport aesthetic and elevates it to modern ECE R22.05 motorcycle standards—the European test protocol recognized by leading helmet makers and independent safety labs as the toughest in the world.

Features:

Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
Molded urethane chin bar pad dissipates energy during frontal impacts
Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
Molded recesses inside EPS designed to accept various aftermarket audio and communication components
ECE R22.05 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

BILTWELL

BILTWELL GRINGO [GLOSS VINTAGE WHITE]

$399.00

Tax included. Shipping calculated at checkout.

Gringo takes its '60s motorsport aesthetic and elevates it to modern ECE R22.05 motorcycle standards—the European test protocol recognized by leading helmet makers and independent safety labs as the toughest in the world.

Features:

Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
Molded urethane chin bar pad dissipates energy during frontal impacts
Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
Molded recesses inside EPS designed to accept various aftermarket audio and communication components
ECE R22.05 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

BILTWELL

BILTWELL GRINGO [METALLIC CHERRY RED]

$399.00

Tax included. Shipping calculated at checkout.

Gringo takes its '60s motorsport aesthetic and elevates it to modern ECE R22.05 motorcycle standards—the European test protocol recognized by leading helmet makers and independent safety labs as the toughest in the world.

Features:

Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
Molded urethane chin bar pad dissipates energy during frontal impacts
Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
Molded recesses inside EPS designed to accept various aftermarket audio and communication components
ECE R22.05 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

BILTWELL

BILTWELL KUNG FU GRIPS 1" [BLACK]

$41.90

Tax included. Shipping calculated at checkout.

Refer to diagram for dimensions.

Our Kung Fu grip's squishy surface design is cozy the second you grab it. New UV-resistant TPV synthetic rubber is soft, yet durable for miles of comfort.

Features:

Comes as a pair
Injection-molded Thermoplastic Vulcanizate synthetic rubber is soft, durable and highly UV-resistant
Medium inside flange cushions rider's hands from rubbing the throttle and controls
Thick outer flange for durability
Safety wire grooves for added security
Aftermarket throttle tube required to install Biltwell grips on stock H-D hand controls—see our Whiskey Throttle

Install Tips:

Counterintuitive though it might seem, aerosol WD-40 spray lubricant is our chemical of choice for installing Biltwell molded TPV grips. "But it's oil!" you say. Yes, but WD-40's combination of aerosol propellant and organic-based lubricant is perfect for sliding tight grips onto clean metal tubes. A quick 1 or 2-second blast into the open end of the grip is all it takes. Once installed, WD-40's chemical compound melts the grip interior just enough to make it stick to the bar like glue, without the mess. IMPORTANT: Wait 24 hours after installation before riding to give grips time to set up on the bars. Immediately after installation you can add safety wire wraps to both ends of the grips; this old motocross trick works great to reduce grip slip on the bars and throttle tube.

BILTWELL

BILTWELL KUNG FU GRIPS 1" [CHOCOLATE]

$41.90

Tax included. Shipping calculated at checkout.

Refer to diagram for dimensions.

Our Kung Fu grip's squishy surface design is cozy the second you grab it. New UV-resistant TPV synthetic rubber is soft, yet durable for miles of comfort.

Features:

Comes as a pair
Injection-molded Thermoplastic Vulcanizate synthetic rubber is soft, durable and highly UV-resistant
Medium inside flange cushions rider's hands from rubbing the throttle and controls
Thick outer flange for durability
Safety wire grooves for added security
Aftermarket throttle tube required to install Biltwell grips on stock H-D hand controls—see our Whiskey Throttle

Install Tips:

Counterintuitive though it might seem, aerosol WD-40 spray lubricant is our chemical of choice for installing Biltwell molded TPV grips. "But it's oil!" you say. Yes, but WD-40's combination of aerosol propellant and organic-based lubricant is perfect for sliding tight grips onto clean metal tubes. A quick 1 or 2-second blast into the open end of the grip is all it takes. Once installed, WD-40's chemical compound melts the grip interior just enough to make it stick to the bar like glue, without the mess. IMPORTANT: Wait 24 hours after installation before riding to give grips time to set up on the bars. Immediately after installation you can add safety wire wraps to both ends of the grips; this old motocross trick works great to reduce grip slip on the bars and throttle tube.

BILTWELL

BILTWELL KUNG FU GRIPS 1" [GREY]

$41.90

Tax included. Shipping calculated at checkout.

Refer to diagram for dimensions.

Our Kung Fu grip's squishy surface design is cozy the second you grab it. New UV-resistant TPV synthetic rubber is soft, yet durable for miles of comfort.

Features:

Comes as a pair
Injection-molded Thermoplastic Vulcanizate synthetic rubber is soft, durable and highly UV-resistant
Medium inside flange cushions rider's hands from rubbing the throttle and controls
Thick outer flange for durability
Safety wire grooves for added security
Aftermarket throttle tube required to install Biltwell grips on stock H-D hand controls—see our Whiskey Throttle

Install Tips:

Counterintuitive though it might seem, aerosol WD-40 spray lubricant is our chemical of choice for installing Biltwell molded TPV grips. "But it's oil!" you say. Yes, but WD-40's combination of aerosol propellant and organic-based lubricant is perfect for sliding tight grips onto clean metal tubes. A quick 1 or 2-second blast into the open end of the grip is all it takes. Once installed, WD-40's chemical compound melts the grip interior just enough to make it stick to the bar like glue, without the mess. IMPORTANT: Wait 24 hours after installation before riding to give grips time to set up on the bars. Immediately after installation you can add safety wire wraps to both ends of the grips; this old motocross trick works great to reduce grip slip on the bars and throttle tube.

BILTWELL

BILTWELL KUNG FU GRIPS 1" [OXBLOOD]

$41.90

Tax included. Shipping calculated at checkout.

Refer to diagram for dimensions.

Our Kung Fu grip's squishy surface design is cozy the second you grab it. New UV-resistant TPV synthetic rubber is soft, yet durable for miles of comfort.

Features:

Comes as a pair
Injection-molded Thermoplastic Vulcanizate synthetic rubber is soft, durable and highly UV-resistant
Medium inside flange cushions rider's hands from rubbing the throttle and controls
Thick outer flange for durability
Safety wire grooves for added security
Aftermarket throttle tube required to install Biltwell grips on stock H-D hand controls—see our Whiskey Throttle

Install Tips:

Counterintuitive though it might seem, aerosol WD-40 spray lubricant is our chemical of choice for installing Biltwell molded TPV grips. "But it's oil!" you say. Yes, but WD-40's combination of aerosol propellant and organic-based lubricant is perfect for sliding tight grips onto clean metal tubes. A quick 1 or 2-second blast into the open end of the grip is all it takes. Once installed, WD-40's chemical compound melts the grip interior just enough to make it stick to the bar like glue, without the mess. IMPORTANT: Wait 24 hours after installation before riding to give grips time to set up on the bars. Immediately after installation you can add safety wire wraps to both ends of the grips; this old motocross trick works great to reduce grip slip on the bars and throttle tube.

BILTWELL

BILTWELL KUNG FU GRIPS 7/8" [BLACK]

$41.90

Tax included. Shipping calculated at checkout.

Refer to diagram for dimensions.

Our Kung Fu grip's squishy surface design is cozy the second you grab it. New UV-resistant TPV synthetic rubber is soft, yet durable for miles of comfort.

Features:

Comes as a pair
Injection-molded Thermoplastic Vulcanizate synthetic rubber is soft, durable and highly UV-resistant
Medium inside flange cushions rider's hands from rubbing the throttle and controls
Thick outer flange for durability
Safety wire grooves for added security
Aftermarket throttle tube required to install Biltwell grips on stock H-D hand controls—see our Whiskey Throttle

Install Tips:

Counterintuitive though it might seem, aerosol WD-40 spray lubricant is our chemical of choice for installing Biltwell molded TPV grips. "But it's oil!" you say. Yes, but WD-40's combination of aerosol propellant and organic-based lubricant is perfect for sliding tight grips onto clean metal tubes. A quick 1 or 2-second blast into the open end of the grip is all it takes. Once installed, WD-40's chemical compound melts the grip interior just enough to make it stick to the bar like glue, without the mess. IMPORTANT: Wait 24 hours after installation before riding to give grips time to set up on the bars. Immediately after installation you can add safety wire wraps to both ends of the grips; this old motocross trick works great to reduce grip slip on the bars and throttle tube.

BILTWELL

BILTWELL KUNG FU GRIPS 7/8" [CHOCOLATE]

$41.90

Tax included. Shipping calculated at checkout.

Refer to diagram for dimensions.

Our Kung Fu grip's squishy surface design is cozy the second you grab it. New UV-resistant TPV synthetic rubber is soft, yet durable for miles of comfort.

Features:

Comes as a pair
Injection-molded Thermoplastic Vulcanizate synthetic rubber is soft, durable and highly UV-resistant
Medium inside flange cushions rider's hands from rubbing the throttle and controls
Thick outer flange for durability
Safety wire grooves for added security
Aftermarket throttle tube required to install Biltwell grips on stock H-D hand controls—see our Whiskey Throttle

Install Tips:

Counterintuitive though it might seem, aerosol WD-40 spray lubricant is our chemical of choice for installing Biltwell molded TPV grips. "But it's oil!" you say. Yes, but WD-40's combination of aerosol propellant and organic-based lubricant is perfect for sliding tight grips onto clean metal tubes. A quick 1 or 2-second blast into the open end of the grip is all it takes. Once installed, WD-40's chemical compound melts the grip interior just enough to make it stick to the bar like glue, without the mess. IMPORTANT: Wait 24 hours after installation before riding to give grips time to set up on the bars. Immediately after installation you can add safety wire wraps to both ends of the grips; this old motocross trick works great to reduce grip slip on the bars and throttle tube.

BILTWELL

BILTWELL KUNG FU GRIPS 7/8" [GREY]

$41.90

Tax included. Shipping calculated at checkout.

Refer to diagram for dimensions.

Our Kung Fu grip's squishy surface design is cozy the second you grab it. New UV-resistant TPV synthetic rubber is soft, yet durable for miles of comfort.

Features:

Comes as a pair
Injection-molded Thermoplastic Vulcanizate synthetic rubber is soft, durable and highly UV-resistant
Medium inside flange cushions rider's hands from rubbing the throttle and controls
Thick outer flange for durability
Safety wire grooves for added security
Aftermarket throttle tube required to install Biltwell grips on stock H-D hand controls—see our Whiskey Throttle

Install Tips:

Counterintuitive though it might seem, aerosol WD-40 spray lubricant is our chemical of choice for installing Biltwell molded TPV grips. "But it's oil!" you say. Yes, but WD-40's combination of aerosol propellant and organic-based lubricant is perfect for sliding tight grips onto clean metal tubes. A quick 1 or 2-second blast into the open end of the grip is all it takes. Once installed, WD-40's chemical compound melts the grip interior just enough to make it stick to the bar like glue, without the mess. IMPORTANT: Wait 24 hours after installation before riding to give grips time to set up on the bars. Immediately after installation you can add safety wire wraps to both ends of the grips; this old motocross trick works great to reduce grip slip on the bars and throttle tube.

BILTWELL

BILTWELL KUNG FU GRIPS 7/8" [OXBLOOD]

$41.90

Tax included. Shipping calculated at checkout.

Refer to diagram for dimensions.

Our Kung Fu grip's squishy surface design is cozy the second you grab it. New UV-resistant TPV synthetic rubber is soft, yet durable for miles of comfort.

Features:

Comes as a pair
Injection-molded Thermoplastic Vulcanizate synthetic rubber is soft, durable and highly UV-resistant
Medium inside flange cushions rider's hands from rubbing the throttle and controls
Thick outer flange for durability
Safety wire grooves for added security
Aftermarket throttle tube required to install Biltwell grips on stock H-D hand controls—see our Whiskey Throttle

Install Tips:

Counterintuitive though it might seem, aerosol WD-40 spray lubricant is our chemical of choice for installing Biltwell molded TPV grips. "But it's oil!" you say. Yes, but WD-40's combination of aerosol propellant and organic-based lubricant is perfect for sliding tight grips onto clean metal tubes. A quick 1 or 2-second blast into the open end of the grip is all it takes. Once installed, WD-40's chemical compound melts the grip interior just enough to make it stick to the bar like glue, without the mess. IMPORTANT: Wait 24 hours after installation before riding to give grips time to set up on the bars. Immediately after installation you can add safety wire wraps to both ends of the grips; this old motocross trick works great to reduce grip slip on the bars and throttle tube.

BILTWELL

BILTWELL LANE SPLITTER [FLAT BLACK FACTORY]

$549.00

Tax included. Shipping calculated at checkout.

Progressively styled and rigorously tested, our ECE-certified helmet is a top choice for riders who demand comfort and high performance. Features include a rugged ABS outer shell, ventilated EPS safety liner, replaceable comfort liner and a clear anti-fog shield.

Features:

Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
Molded urethane chin bar pad features front and side vents for airflow
CE-certified polycarbonate shield includes anti-fog and anti-scratch treatments for safety and durability
Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
Molded recesses inside EPS interior shell accept select aftermarket audio and communication components
Rugged shield hinge hardware with robust detents allows you to open the shield at slow speeds for increased airflow

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

BILTWELL LANE SPLITTER CHEEK PAD FITS 2205

BILTWELL

BILTWELL LANE SPLITTER [FLAT BLACK]

$549.00

Tax included. Shipping calculated at checkout.

Progressively styled and rigorously tested, our ECE-certified helmet is a top choice for riders who demand comfort and high performance. Features include a rugged ABS outer shell, ventilated EPS safety liner, replaceable comfort liner and a clear anti-fog shield.

Features:

Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
Molded urethane chin bar pad features front and side vents for airflow
CE-certified polycarbonate shield includes anti-fog and anti-scratch treatments for safety and durability
Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
Molded recesses inside EPS interior shell accept select aftermarket audio and communication components
Rugged shield hinge hardware with robust detents allows you to open the shield at slow speeds for increased airflow

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

BILTWELL

BILTWELL LANE SPLITTER [FLAT TITANIUM]

$549.00

Tax included. Shipping calculated at checkout.

Progressively styled and rigorously tested, our ECE-certified helmet is a top choice for riders who demand comfort and high performance. Features include a rugged ABS outer shell, ventilated EPS safety liner, replaceable comfort liner and a clear anti-fog shield.

Features:

Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
Molded urethane chin bar pad features front and side vents for airflow
CE-certified polycarbonate shield includes anti-fog and anti-scratch treatments for safety and durability
Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
Molded recesses inside EPS interior shell accept select aftermarket audio and communication components
Rugged shield hinge hardware with robust detents allows you to open the shield at slow speeds for increased airflow

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

BILTWELL

BILTWELL LANE SPLITTER [GLOSS BLACK]

$549.00

Tax included. Shipping calculated at checkout.

Progressively styled and rigorously tested, our ECE-certified helmet is a top choice for riders who demand comfort and high performance. Features include a rugged ABS outer shell, ventilated EPS safety liner, replaceable comfort liner and a clear anti-fog shield.

Features:

Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
Molded urethane chin bar pad features front and side vents for airflow
CE-certified polycarbonate shield includes anti-fog and anti-scratch treatments for safety and durability
Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
Molded recesses inside EPS interior shell accept select aftermarket audio and communication components
Rugged shield hinge hardware with robust detents allows you to open the shield at slow speeds for increased airflow

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

BILTWELL

BILTWELL LANE SPLITTER [GLOSS WHITE]

$549.00

Tax included. Shipping calculated at checkout.

Progressively styled and rigorously tested, our ECE-certified helmet is a top choice for riders who demand comfort and high performance. Features include a rugged ABS outer shell, ventilated EPS safety liner, replaceable comfort liner and a clear anti-fog shield.

Features:

Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
Molded urethane chin bar pad features front and side vents for airflow
CE-certified polycarbonate shield includes anti-fog and anti-scratch treatments for safety and durability
Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
Molded recesses inside EPS interior shell accept select aftermarket audio and communication components
Rugged shield hinge hardware with robust detents allows you to open the shield at slow speeds for increased airflow

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

BILTWELL

BILTWELL RECOIL GRIPS 1" [BLACK]

$41.90

Tax included. Shipping calculated at checkout.

Refer to diagram for dimensions.

Football-shaped cross section is fat in the middle and smaller on both ends to follow the contours of your open fist. Super durable and great looking, Recoil is our classic chopper grip

Features:

Comes as a pair
Injection-molded Thermoplastic Vulcanizate synthetic rubber is soft, durable and highly UV-resistant
Thick, tapered one-piece molded end design for durability
No inside flange give Recoil a classic chopper vibe
Safety wire grooves on grip ends for added security
Aftermarket throttle tube required to install Biltwell grips on stock H-D hand controls—see our Whiskey Throttle

Install Tips:

Counterintuitive though it might seem, aerosol WD-40 spray lubricant is our chemical of choice for installing Biltwell molded TPV grips. "But it's oil!" you say. Yes, but WD-40's combination of aerosol propellant and organic-based lubricant is perfect for sliding tight grips onto clean metal tubes. A quick 1 or 2-second blast into the open end of the grip is all it takes. Once installed, WD-40's chemical compound melts the grip interior just enough to make it stick to the bar like glue, without the mess. IMPORTANT: Wait 24 hours after installation before riding to give grips time to set up on the bars. Immediately after installation you can add safety wire wraps to both ends of the grips; this old motocross trick works great to reduce grip slip on the bars and throttle tube.

BILTWELL

BILTWELL RECOIL GRIPS 1" [CHOCOLATE]

$41.90

Tax included. Shipping calculated at checkout.

Refer to diagram for dimensions.

Football-shaped cross section is fat in the middle and smaller on both ends to follow the contours of your open fist. Super durable and great looking, Recoil is our classic chopper grip

Features:

Comes as a pair
Injection-molded Thermoplastic Vulcanizate synthetic rubber is soft, durable and highly UV-resistant
Thick, tapered one-piece molded end design for durability
No inside flange give Recoil a classic chopper vibe
Safety wire grooves on grip ends for added security
Aftermarket throttle tube required to install Biltwell grips on stock H-D hand controls—see our Whiskey Throttle

Install Tips:

Counterintuitive though it might seem, aerosol WD-40 spray lubricant is our chemical of choice for installing Biltwell molded TPV grips. "But it's oil!" you say. Yes, but WD-40's combination of aerosol propellant and organic-based lubricant is perfect for sliding tight grips onto clean metal tubes. A quick 1 or 2-second blast into the open end of the grip is all it takes. Once installed, WD-40's chemical compound melts the grip interior just enough to make it stick to the bar like glue, without the mess. IMPORTANT: Wait 24 hours after installation before riding to give grips time to set up on the bars. Immediately after installation you can add safety wire wraps to both ends of the grips; this old motocross trick works great to reduce grip slip on the bars and throttle tube.

BILTWELL

BILTWELL RECOIL GRIPS 1" [GREY]

$41.90

Tax included. Shipping calculated at checkout.

Refer to diagram for dimensions.

Football-shaped cross section is fat in the middle and smaller on both ends to follow the contours of your open fist. Super durable and great looking, Recoil is our classic chopper grip

Features:

Comes as a pair
Injection-molded Thermoplastic Vulcanizate synthetic rubber is soft, durable and highly UV-resistant
Thick, tapered one-piece molded end design for durability
No inside flange give Recoil a classic chopper vibe
Safety wire grooves on grip ends for added security
Aftermarket throttle tube required to install Biltwell grips on stock H-D hand controls—see our Whiskey Throttle

Install Tips:

Counterintuitive though it might seem, aerosol WD-40 spray lubricant is our chemical of choice for installing Biltwell molded TPV grips. "But it's oil!" you say. Yes, but WD-40's combination of aerosol propellant and organic-based lubricant is perfect for sliding tight grips onto clean metal tubes. A quick 1 or 2-second blast into the open end of the grip is all it takes. Once installed, WD-40's chemical compound melts the grip interior just enough to make it stick to the bar like glue, without the mess. IMPORTANT: Wait 24 hours after installation before riding to give grips time to set up on the bars. Immediately after installation you can add safety wire wraps to both ends of the grips; this old motocross trick works great to reduce grip slip on the bars and throttle tube.

BILTWELL

BILTWELL RECOIL GRIPS 1" [OXBLOOD]

$41.90

Tax included. Shipping calculated at checkout.

Refer to diagram for dimensions.

Football-shaped cross section is fat in the middle and smaller on both ends to follow the contours of your open fist. Super durable and great looking, Recoil is our classic chopper grip

Features:

Comes as a pair
Injection-molded Thermoplastic Vulcanizate synthetic rubber is soft, durable and highly UV-resistant
Thick, tapered one-piece molded end design for durability
No inside flange give Recoil a classic chopper vibe
Safety wire grooves on grip ends for added security
Aftermarket throttle tube required to install Biltwell grips on stock H-D hand controls—see our Whiskey Throttle

Install Tips:

Counterintuitive though it might seem, aerosol WD-40 spray lubricant is our chemical of choice for installing Biltwell molded TPV grips. "But it's oil!" you say. Yes, but WD-40's combination of aerosol propellant and organic-based lubricant is perfect for sliding tight grips onto clean metal tubes. A quick 1 or 2-second blast into the open end of the grip is all it takes. Once installed, WD-40's chemical compound melts the grip interior just enough to make it stick to the bar like glue, without the mess. IMPORTANT: Wait 24 hours after installation before riding to give grips time to set up on the bars. Immediately after installation you can add safety wire wraps to both ends of the grips; this old motocross trick works great to reduce grip slip on the bars and throttle tube.

BILTWELL

BILTWELL RECOIL GRIPS 1" [WHITE]

$41.90

Tax included. Shipping calculated at checkout.

Refer to diagram for dimensions.

Football-shaped cross section is fat in the middle and smaller on both ends to follow the contours of your open fist. Super durable and great looking, Recoil is our classic chopper grip

Features:

Comes as a pair
Injection-molded Thermoplastic Vulcanizate synthetic rubber is soft, durable and highly UV-resistant
Thick, tapered one-piece molded end design for durability
No inside flange give Recoil a classic chopper vibe
Safety wire grooves on grip ends for added security
Aftermarket throttle tube required to install Biltwell grips on stock H-D hand controls—see our Whiskey Throttle

Install Tips:

Counterintuitive though it might seem, aerosol WD-40 spray lubricant is our chemical of choice for installing Biltwell molded TPV grips. "But it's oil!" you say. Yes, but WD-40's combination of aerosol propellant and organic-based lubricant is perfect for sliding tight grips onto clean metal tubes. A quick 1 or 2-second blast into the open end of the grip is all it takes. Once installed, WD-40's chemical compound melts the grip interior just enough to make it stick to the bar like glue, without the mess. IMPORTANT: Wait 24 hours after installation before riding to give grips time to set up on the bars. Immediately after installation you can add safety wire wraps to both ends of the grips; this old motocross trick works great to reduce grip slip on the bars and throttle tube.

BILTWELL

BILTWELL RECOIL GRIPS 7/8" [BLACK]

$41.90

Tax included. Shipping calculated at checkout.

Refer to diagram for dimensions.

Football-shaped cross section is fat in the middle and smaller on both ends to follow the contours of your open fist. Super durable and great looking, Recoil is our classic chopper grip

Features:

Comes as a pair
Injection-molded Thermoplastic Vulcanizate synthetic rubber is soft, durable and highly UV-resistant
Thick, tapered one-piece molded end design for durability
No inside flange give Recoil a classic chopper vibe
Safety wire grooves on grip ends for added security
Aftermarket throttle tube required to install Biltwell grips on stock H-D hand controls—see our Whiskey Throttle

Install Tips:

Counterintuitive though it might seem, aerosol WD-40 spray lubricant is our chemical of choice for installing Biltwell molded TPV grips. "But it's oil!" you say. Yes, but WD-40's combination of aerosol propellant and organic-based lubricant is perfect for sliding tight grips onto clean metal tubes. A quick 1 or 2-second blast into the open end of the grip is all it takes. Once installed, WD-40's chemical compound melts the grip interior just enough to make it stick to the bar like glue, without the mess. IMPORTANT: Wait 24 hours after installation before riding to give grips time to set up on the bars. Immediately after installation you can add safety wire wraps to both ends of the grips; this old motocross trick works great to reduce grip slip on the bars and throttle tube.

City

Refine

BRAND

RIDE STYLE

GENDER

PRODUCT

RIM DIAMETER

WIDTH

PROFILE

MATERIAL TYPE

HELMET TYPE

HELMET MODEL

Refine

BRAND

RIDE STYLE

GENDER

PRODUCT

RIM DIAMETER

WIDTH

PROFILE

MATERIAL TYPE

HELMET TYPE

HELMET MODEL

Fox Union MTB Collection

Pirelli Diablo Rosso IV Corsa