1"

The Motor Company introduced their new, super-clean digital dash module on three different 2018-up Softail models. Our Billet Dash Panel gives this OE part a clean place to live when you upgrade to Tyson XL bars or Murdock risers

Features:

• CNC-machined 6061 T-6 billet aluminum construction
• One-piece 1-1/4-inch clamp fits around Tyson XL and comparably sized round bars and risers, and adjusts up or down to customize your Softail cockpit
• CNC'ed aluminum shims fit select 1-inch O.D. bars and Murdock risers
• Stainless-steel Allen cap hardware included
• Stock H-D digital dash module mounts inside Dash Panel with original-equipment screws
• Chrome and black electroplated finishes available

Form & Function:

We dug Harley's digital dash module when we saw on our 2018 Softail Street Bob, but we knew it would pose challenges for Softail riders who wanted to customize their new M8-powered Harley with Tyson XL bars or Murdock risers. Our Billet Dash Panel accepts the stock digital module and OE hardware and bolts around the uprights on our Tyson XL bars or Murdock risers with the supplied 1-inch alloy shims to create the cleanest digital dash install available.

1" O.D, Smooth for custom applications - these have no slots, dimples or castellated ends. We have TBW versions available also.

Refer to diagram for dimensions.

The top-selling handlebar in our range, and for good reason. Our Tracker bars come in two O.D.'s and three heights, and look great in any stock or aftermarket riser you can imagine. These handlebars are constructed with seamless CNC mandrel bent 0.120” wall 4130 chromoly tubes. Available in two styles: Smooth bars are for custom applications and have no slots, dimples or castellated ends. TBW w/ insert handlebars work with regular, cable-operated throttles, and if you remove the black end plug it will accept Harley's Throttle-By-Wire control module. These bars have slots on each side for stock H-D hand controls and an exit slot in the center for internal wiring.

Features:

• Seamless 0.120" (3mm) wall 4130 chromoly construction
• Precision mandrel-bent tubing for comfortable, precise ergonomics
• Black electroplate and mirror chrome-plated finishes available
• 1" O.D (7/8" option available), 18.4mm I.D
• 1" O.D. model available in smooth for custom application or TBW w/ insert for regular, cable-operated throttles, and if you remove the black end plug it will accept Harley's Throttle-By-Wire control module
• Technischer Überwachungsverein (Technical Inspection Association, or TüV) in Germany is an independent laboratory that tests the fatigue strength, manufacturing quality, and fitment for a wide range of consumer products, with special emphasis on automotive and motorcycle components and accessories. Biltwell handlebars and risers that have received TüV verification are among the strongest and most thoroughly well-tested motorcycle parts in the world.

Form & Function:

With a backsweep less severe than most stock handlebars, any Tracker in our range is a great replacement for riders who want to ditch the wheelbarrow feel of OE bars. When people ask for our advice on which Tracker to mate with any given Murdock riser, we recommend building a combo that puts your hands slightly below or even with the height of your shoulders when you're sitting comfortably on your motorcycle. Hands higher than shoulder height is popular, but it's a position better suited for experienced riders. If the cables and control wires on your bike prohibit going too tall or wide with your bars, combine our low or mid Tracker with some Slimline or Thunder risers for a clean, race-inspired, comfortable cockpit.

1" O.D, TBW Version w/ insert - work with regular, cable-operated throttles, and if you remove the black end plug it will accept Harley's Throttle-By-Wire control module. These bars have slots on each side for stock H-D hand controls and an exit slot in the center for internal wiring. We also have Smooth options available for custom applications.

Refer to diagram for dimensions.

The top-selling handlebar in our range, and for good reason. Our Tracker bars come in two O.D.'s and three heights, and look great in any stock or aftermarket riser you can imagine. These handlebars are constructed with seamless CNC mandrel bent 0.120” wall 4130 chromoly tubes. Available in two styles: Smooth bars are for custom applications and have no slots, dimples or castellated ends. TBW w/ insert handlebars work with regular, cable-operated throttles, and if you remove the black end plug it will accept Harley's Throttle-By-Wire control module. These bars have slots on each side for stock H-D hand controls and an exit slot in the center for internal wiring.

Features:

• Seamless 0.120" (3mm) wall 4130 chromoly construction
• Precision mandrel-bent tubing for comfortable, precise ergonomics
• Black electroplate finish
• TBW w/ insert option has a 1in O.D. with a 20.9mm I.D.
• 1" O.D. model available in smooth for custom application or TBW w/ insert for regular, cable-operated throttles, and if you remove the black end plug it will accept Harley's Throttle-By-Wire control module
• Technischer Überwachungsverein (Technical Inspection Association, or TüV) in Germany is an independent laboratory that tests the fatigue strength, manufacturing quality, and fitment for a wide range of consumer products, with special emphasis on automotive and motorcycle components and accessories. Biltwell handlebars and risers that have received TüV verification are among the strongest and most thoroughly well-tested motorcycle parts in the world.

Form & Function:

With a backsweep less severe than most stock handlebars, any Tracker in our range is a great replacement for riders who want to ditch the wheelbarrow feel of OE bars. When people ask for our advice on which Tracker to mate with any given Murdock riser, we recommend building a combo that puts your hands slightly below or even with the height of your shoulders when you're sitting comfortably on your motorcycle. Hands higher than shoulder height is popular, but it's a position better suited for experienced riders. If the cables and control wires on your bike prohibit going too tall or wide with your bars, combine our low or mid Tracker with some Slimline or Thunder risers for a clean, race-inspired, comfortable cockpit.

1" O.D, Smooth for custom applications - these have no slots, dimples or castellated ends. We have TBW versions available also.

Refer to diagram for dimensions.

The top-selling handlebar in our range, and for good reason. Our Tracker bars come in two O.D.'s and three heights, and look great in any stock or aftermarket riser you can imagine. These handlebars are constructed with seamless CNC mandrel bent 0.120” wall 4130 chromoly tubes. Available in two styles: Smooth bars are for custom applications and have no slots, dimples or castellated ends. TBW w/ insert handlebars work with regular, cable-operated throttles, and if you remove the black end plug it will accept Harley's Throttle-By-Wire control module. These bars have slots on each side for stock H-D hand controls and an exit slot in the center for internal wiring.

Features:

• Seamless 0.120" (3mm) wall 4130 chromoly construction
• Precision mandrel-bent tubing for comfortable, precise ergonomics
• Black electroplate finish
• 1" O.D (7/8" option available), 18.4mm I.D
• 1" O.D. model available in smooth for custom application or TBW w/ insert for regular, cable-operated throttles, and if you remove the black end plug it will accept Harley's Throttle-By-Wire control module
• Technischer Überwachungsverein (Technical Inspection Association, or TüV) in Germany is an independent laboratory that tests the fatigue strength, manufacturing quality, and fitment for a wide range of consumer products, with special emphasis on automotive and motorcycle components and accessories. Biltwell handlebars and risers that have received TüV verification are among the strongest and most thoroughly well-tested motorcycle parts in the world.

Form & Function:

With a backsweep less severe than most stock handlebars, any Tracker in our range is a great replacement for riders who want to ditch the wheelbarrow feel of OE bars. When people ask for our advice on which Tracker to mate with any given Murdock riser, we recommend building a combo that puts your hands slightly below or even with the height of your shoulders when you're sitting comfortably on your motorcycle. Hands higher than shoulder height is popular, but it's a position better suited for experienced riders. If the cables and control wires on your bike prohibit going too tall or wide with your bars, combine our low or mid Tracker with some Slimline or Thunder risers for a clean, race-inspired, comfortable cockpit.

1" O.D, TBW Version w/ insert - work with regular, cable-operated throttles, and if you remove the black end plug it will accept Harley's Throttle-By-Wire control module. These bars have slots on each side for stock H-D hand controls and an exit slot in the center for internal wiring. We also have Smooth options available for custom applications.

Refer to diagram for dimensions.

The top-selling handlebar in our range, and for good reason. Our Tracker bars come in two O.D.'s and three heights, and look great in any stock or aftermarket riser you can imagine. These handlebars are constructed with seamless CNC mandrel bent 0.120” wall 4130 chromoly tubes. Available in two styles: Smooth bars are for custom applications and have no slots, dimples or castellated ends. TBW w/ insert handlebars work with regular, cable-operated throttles, and if you remove the black end plug it will accept Harley's Throttle-By-Wire control module. These bars have slots on each side for stock H-D hand controls and an exit slot in the center for internal wiring.

Features:

• Seamless 0.120" (3mm) wall 4130 chromoly construction
• Precision mandrel-bent tubing for comfortable, precise ergonomics
• Black electroplate finish
• TBW w/ insert option has a 1in O.D. with a 20.9mm I.D.
• 1" O.D. model available in smooth for custom application or TBW w/ insert for regular, cable-operated throttles, and if you remove the black end plug it will accept Harley's Throttle-By-Wire control module
• Technischer Überwachungsverein (Technical Inspection Association, or TüV) in Germany is an independent laboratory that tests the fatigue strength, manufacturing quality, and fitment for a wide range of consumer products, with special emphasis on automotive and motorcycle components and accessories. Biltwell handlebars and risers that have received TüV verification are among the strongest and most thoroughly well-tested motorcycle parts in the world.

Form & Function:

With a backsweep less severe than most stock handlebars, any Tracker in our range is a great replacement for riders who want to ditch the wheelbarrow feel of OE bars. When people ask for our advice on which Tracker to mate with any given Murdock riser, we recommend building a combo that puts your hands slightly below or even with the height of your shoulders when you're sitting comfortably on your motorcycle. Hands higher than shoulder height is popular, but it's a position better suited for experienced riders. If the cables and control wires on your bike prohibit going too tall or wide with your bars, combine our low or mid Tracker with some Slimline or Thunder risers for a clean, race-inspired, comfortable cockpit.

Stock Harley grips are molded to a flexible plastic tube inside the hand control, and don't provide the precision feel befitting a custom motorcycle. Our CNC-machined aluminum throttle tube replaces the stock unit to improve performance and make grip installation easy.

Features:

• CNC-machined 6061 T-6 aluminum construction
• Fits 1-inch O.D. handlebars, accepts dual-cable throttle assemblies
• Knurled alloy tube accepts aftermarket rubber grips
• Black electroplate or clear anodized over raw aluminum finish
• Retrofits to many model-year stock and select aftermarket H-D hand controls
• This component required to install Biltwell molded TPV grips

Form & Function:

Stock Harley grips aren't much to brag about: hard as a brick, slippery as a frog and ugly as a mud piñata. Our Whiskey Throttle tube lets you ditch stock grips so you can install comfortable molded rubber grips on your freedom machine. Our Whiskey throttle tube and a pair of Biltwell grips is one of the fastest, least expensive performance upgrades you can do on your motorcycle.

Stock Harley grips are molded to a flexible plastic tube inside the hand control, and don't provide the precision feel befitting a custom motorcycle. Our CNC-machined aluminum throttle tube replaces the stock unit to improve performance and make grip installation easy.

Features:

• CNC-machined 6061 T-6 aluminum construction
• Fits 1-inch O.D. handlebars, accepts dual-cable throttle assemblies
• Knurled alloy tube accepts aftermarket rubber grips
• Black electroplate or clear anodized over raw aluminum finish
• Retrofits to many model-year stock and select aftermarket H-D hand controls
• This component required to install Biltwell molded TPV grips

Form & Function:

Stock Harley grips aren't much to brag about: hard as a brick, slippery as a frog and ugly as a mud piñata. Our Whiskey Throttle tube lets you ditch stock grips so you can install comfortable molded rubber grips on your freedom machine. Our Whiskey throttle tube and a pair of Biltwell grips is one of the fastest, least expensive performance upgrades you can do on your motorcycle.