Biltwell Lane Splitter

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in stainless steel screws and anodized washer colours so you can fine-tune the look of your lid.

Features:

• Kits fit Gringo S and Lane Splitter helmets to compliment or replace stock components
• Stamped alloy washers with anodized finish
• Stainless steel screws feature thread lock compound already applied
• Each kit includes two screws and two washers

Install Tips:

Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN.

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in stainless steel screws and anodized washer colours so you can fine-tune the look of your lid.

Features:

• Kits fit Gringo S and Lane Splitter helmets to compliment or replace stock components
• Stamped alloy washers with anodized finish
• Stainless steel screws feature thread lock compound already applied
• Each kit includes two screws and two washers

Install Tips:

Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN.

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in stainless steel screws and anodized washer colours so you can fine-tune the look of your lid.

Features:

• Kits fit Gringo S and Lane Splitter helmets to compliment or replace stock components
• Stamped alloy washers with anodized finish
• Stainless steel screws feature thread lock compound already applied
• Each kit includes two screws and two washers

Install Tips:

Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN.

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in stainless steel screws and anodized washer colours so you can fine-tune the look of your lid.

Features:

• Kits fit Gringo S and Lane Splitter helmets to compliment or replace stock components
• Stamped alloy washers with anodized finish
• Stainless steel screws feature thread lock compound already applied
• Each kit includes two screws and two washers

Install Tips:

Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN.

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in stainless steel screws and anodized washer colours so you can fine-tune the look of your lid.

Features:

• Kits fit Gringo S and Lane Splitter helmets to compliment or replace stock components
• Stamped alloy washers with anodized finish
• Stainless steel screws feature thread lock compound already applied
• Each kit includes two screws and two washers

Install Tips:

Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN.

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in stainless steel screws and anodized washer colours so you can fine-tune the look of your lid.

Features:

• Kits fit Gringo S and Lane Splitter helmets to compliment or replace stock components
• Stamped alloy washers with anodized finish
• Stainless steel screws feature thread lock compound already applied
• Each kit includes two screws and two washers

Install Tips:

Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN.

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in stainless steel screws and anodized washer colours so you can fine-tune the look of your lid.

Features:

• Kits fit Gringo S and Lane Splitter helmets to compliment or replace stock components
• Stamped alloy washers with anodized finish
• Stainless steel screws feature thread lock compound already applied
• Each kit includes two screws and two washers

Install Tips:

Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN.

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in stainless steel screws and anodized washer colours so you can fine-tune the look of your lid.

Features:

• Kits fit Gringo S and Lane Splitter helmets to compliment or replace stock components
• Stamped alloy washers with anodized finish
• Stainless steel screws feature thread lock compound already applied
• Each kit includes two screws and two washers

Install Tips:

Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN.

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in stainless steel screws and anodized washer colours so you can fine-tune the look of your lid.

Features:

• Kits fit Gringo S and Lane Splitter helmets to compliment or replace stock components
• Stamped alloy washers with anodized finish
• Stainless steel screws feature thread lock compound already applied
• Each kit includes two screws and two washers

Install Tips:

Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN.

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in stainless steel screws and anodized washer colours so you can fine-tune the look of your lid.

Features:

• Kits fit Gringo S and Lane Splitter helmets to compliment or replace stock components
• Stamped alloy washers with anodized finish
• Stainless steel screws feature thread lock compound already applied
• Each kit includes two screws and two washers

Install Tips:

Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN.