Road

Keiti Universal Quick Release Fasteners make tear-down and re-assembly of fairings and bodywork much easier, with handy D-Rings.

Keiti Universal Quick Release Fasteners make tear-down and re-assembly of fairings and bodywork much easier, with handy D-Rings.

Keiti Universal Quick Release Fasteners make tear-down and re-assembly of fairings and bodywork much easier, with handy D-Rings.

Experience the convenience and durability of installing your new Nelson Rigg cover is easy!

To help, there is a "Back" tag that is sewn on the inside of the cover located at the rear tire.

Once you’ve identified the back of the cover, you may start to secure the cover around the front tire first, then pull the cover over the top of the handlebars and secure around the rear tire last.

Features:

• Material: Durable but soft PVC.
• Seams: All seams are head welded - 100% Waterproof.
• Ventilation: Fully ventilated using our exclusive "Cool-Vent" system.
• Tie Down Points: Front and Middle grommets for safety tie-downs.
• Colour: Graphite Black.
• Warranty: Exclusive 1 year warranty.

Note:

• Cover is not intended for trailering.
• Do not put cover on bike with hot pipes or parts.

Dimensions:

• Length: 3.20m
• Height: 1.75m

How To Measure:

Length: The maximum length of the front tyre to the rear tyre /
rear top box / rear fender, whichever makes contact with the
cover. Measure from front to back across the longest parts of your
motorcycle. Measure in a straight line without any contours or bends.

Front Width: Maximum width of handlebar, mirror or faring.
Whichever is wider. Rear Width: The maximum width of the seat,
fairing, top case, or saddlebags, whichever is wider. Measure from left
to right across the widest part of your motorcycle. Measure in a straight
line without any contours or bends.

Front Height: Maximum height of windshield, mirrors or handlebars.
Whichever is taller. Measure from the tallest point of your motorcycle
to about the bottom of your brake rotor.

Please consider our XXL size covers if you have a top case
or tour trunk.

Experience the convenience and durability of installing your new Nelson Rigg cover is easy!

To help, there is a "Back" tag that is sewn on the inside of the cover located at the rear tire.

Once you’ve identified the back of the cover, you may start to secure the cover around the front tire first, then pull the cover over the top of the handlebars and secure around the rear tire last.

Features:

• Material: Durable but soft PVC.
• Seams: All seams are head welded - 100% Waterproof.
• Ventilation: Fully ventilated using our exclusive "Cool-Vent" system.
• Tie Down Points: Front and Middle grommets for safety tie-downs.
• Colour: Graphite Black.
• Warranty: Exclusive 1 year warranty.

Note:

• Cover is not intended for trailering.
• Do not put cover on bike with hot pipes or parts.

Dimensions:

• Length: 2.87m
• Height: 1.75m

How To Measure:

Length: The maximum length of the front tyre to the rear tyre /
rear top box / rear fender, whichever makes contact with the
cover. Measure from front to back across the longest parts of your
motorcycle. Measure in a straight line without any contours or bends.

Front Width: Maximum width of handlebar, mirror or faring.
Whichever is wider. Rear Width: The maximum width of the seat,
fairing, top case, or saddlebags, whichever is wider. Measure from left
to right across the widest part of your motorcycle. Measure in a straight
line without any contours or bends.

Front Height: Maximum height of windshield, mirrors or handlebars.
Whichever is taller. Measure from the tallest point of your motorcycle
to about the bottom of your brake rotor.

Please consider our XXL size covers if you have a top case
or tour trunk.

Experience the convenience and durability of installing your new Nelson Rigg cover is easy!

To help, there is a "Back" tag that is sewn on the inside of the cover located at the rear tire.

Once you’ve identified the back of the cover, you may start to secure the cover around the front tire first, then pull the cover over the top of the handlebars and secure around the rear tire last.

Features:

• Material: Durable but soft PVC.
• Seams: All seams are head welded - 100% Waterproof.
• Ventilation: Fully ventilated using our exclusive "Cool-Vent" system.
• Tie Down Points: Front and Middle grommets for safety tie-downs.
• Colour: Graphite Black.
• Warranty: Exclusive 1 year warranty.

Note:

• Cover is not intended for trailering.
• Do not put cover on bike with hot pipes or parts.

Dimensions:

• Length: 2.43m
• Height: 1.65m

How To Measure:

Length: The maximum length of the front tyre to the rear tyre /
rear top box / rear fender, whichever makes contact with the
cover. Measure from front to back across the longest parts of your
motorcycle. Measure in a straight line without any contours or bends.

Front Width: Maximum width of handlebar, mirror or faring.
Whichever is wider. Rear Width: The maximum width of the seat,
fairing, top case, or saddlebags, whichever is wider. Measure from left
to right across the widest part of your motorcycle. Measure in a straight
line without any contours or bends.

Front Height: Maximum height of windshield, mirrors or handlebars.
Whichever is taller. Measure from the tallest point of your motorcycle
to about the bottom of your brake rotor.

Please consider our XXL size covers if you have a top case
or tour trunk.

Built for riding and working on motorcycles. No carbon fiber, no fringe, no compromises. Ventilated 100% synthetic construction makes Moto glove perfect for Spring and Summer riding.

Features:

• Two-way stretch polyester back panels for comfort
• Single layer synthetic leather palm w/ reinforced thumb
• Adjustable wrist wrap with Velcro closure and thermoplastic rubber Biltwell shield
• Lycra expansion panels in finger joints for enhanced dexterity
• Accordion baffles on finger joints for added flexibility
• Rugged single- and double-needle polyester stitching throughout
• Smart screen thumb and finger tips

Form & Function:

Anyone who has ridden dirt bikes or BMX will appreciate our Moto gloves. Like so many other garage builders and bikeriders, we love the thin palms and snug fit of modern mechanic’s gloves, but can do without their NASCAR-approved colors and graphics. For pure understatement, Biltwell Moto gloves deliver

Built for riding and working on motorcycles. No carbon fiber, no fringe, no compromises. Ventilated 100% synthetic construction makes Moto glove perfect for Spring and Summer riding.

Features:

• Two-way stretch polyester back panels for comfort
• Single layer synthetic leather palm w/ reinforced thumb
• Adjustable wrist wrap with Velcro closure and thermoplastic rubber Biltwell shield
• Lycra expansion panels in finger joints for enhanced dexterity
• Accordion baffles on finger joints for added flexibility
• Rugged single- and double-needle polyester stitching throughout
• Smart screen thumb and finger tips

Form & Function:

Anyone who has ridden dirt bikes or BMX will appreciate our Moto gloves. Like so many other garage builders and bikeriders, we love the thin palms and snug fit of modern mechanic’s gloves, but can do without their NASCAR-approved colors and graphics. For pure understatement, Biltwell Moto gloves deliver

Built for riding and working on motorcycles. No carbon fiber, no fringe, no compromises. Ventilated 100% synthetic construction makes Moto glove perfect for Spring and Summer riding.

Features:

• Two-way stretch polyester back panels for comfort
• Single layer synthetic leather palm w/ reinforced thumb
• Adjustable wrist wrap with Velcro closure and thermoplastic rubber Biltwell shield
• Lycra expansion panels in finger joints for enhanced dexterity
• Accordion baffles on finger joints for added flexibility
• Rugged single- and double-needle polyester stitching throughout
• Smart screen thumb and finger tips

Form & Function:

Anyone who has ridden dirt bikes or BMX will appreciate our Moto gloves. Like so many other garage builders and bikeriders, we love the thin palms and snug fit of modern mechanic’s gloves, but can do without their NASCAR-approved colors and graphics. For pure understatement, Biltwell Moto gloves deliver

Built for riding and working on motorcycles. No carbon fiber, no fringe, no compromises. Ventilated 100% synthetic construction makes Moto glove perfect for Spring and Summer riding.

Features:

• Two-way stretch polyester back panels for comfort
• Single layer synthetic leather palm w/ reinforced thumb
• Adjustable wrist wrap with Velcro closure and thermoplastic rubber Biltwell shield
• Lycra expansion panels in finger joints for enhanced dexterity
• Accordion baffles on finger joints for added flexibility
• Rugged single- and double-needle polyester stitching throughout
• Smart screen thumb and finger tips

Form & Function:

Anyone who has ridden dirt bikes or BMX will appreciate our Moto gloves. Like so many other garage builders and bikeriders, we love the thin palms and snug fit of modern mechanic’s gloves, but can do without their NASCAR-approved colors and graphics. For pure understatement, Biltwell Moto gloves deliver

The ‘80s were the Golden Age of American motocross, when advances in gear design and material technology moved even faster than the legends who wore the stuff. That era and those riders were the inspiration for our new Baja glove.

Features:

• Goatskin palm and thumb reinforcement for added toughness in these high friction areas
• Synthetic suede palm and thumb construction for a snug, comfortable fit
• Stretch polyester construction on ring and pinkie fingers for maximum flexibility
• Three-ply woven mesh back panel for ventilation for comfort
• Conductive stitching in fingers and thumb lets you operate smart screens
• Molded two-ply neoprene wrist wrap with adjustable Velcro closure
• Lycra expansion panels in finger joints for added dexterity
• Rugged single- and double-needle polyester stitching throughout
• Thermoplastic rubber lightning bolt knuckle protector
• 5mm thick hidden internal neoprene knuckle guard
• Goatskin fingertips for extra durability
• Fully CE certified

Form & Function:

Modern motocross gloves have evolved into little more than a nylon sock for your hands—very little padding, and virtually no real leather for protection where you need it. Baja gloves buck this trend by combining goatskin reinforcement in friction zones with internal impact protection to create a cool, comfortable glove for aggressive riding on tracks, trails, or tarmac.

The ‘80s were the Golden Age of American motocross, when advances in gear design and material technology moved even faster than the legends who wore the stuff. That era and those riders were the inspiration for our new Baja glove.

Features:

• Goatskin palm and thumb reinforcement for added toughness in these high friction areas
• Synthetic suede palm and thumb construction for a snug, comfortable fit
• Stretch polyester construction on ring and pinkie fingers for maximum flexibility
• Three-ply woven mesh back panel for ventilation for comfort
• Conductive stitching in fingers and thumb lets you operate smart screens
• Molded two-ply neoprene wrist wrap with adjustable Velcro closure
• Lycra expansion panels in finger joints for added dexterity
• Rugged single- and double-needle polyester stitching throughout
• Thermoplastic rubber lightning bolt knuckle protector
• 5mm thick hidden internal neoprene knuckle guard
• Goatskin fingertips for extra durability
• Fully CE certified

Form & Function:

Modern motocross gloves have evolved into little more than a nylon sock for your hands—very little padding, and virtually no real leather for protection where you need it. Baja gloves buck this trend by combining goatskin reinforcement in friction zones with internal impact protection to create a cool, comfortable glove for aggressive riding on tracks, trails, or tarmac.

Our newest 100-percent synthetic glove is built for aggressive off-road riding, but that doesn’t mean you can’t wear it on pavement. You can, and we know a bunch of high-performance street riders who do. 

Features:

• Synthetic suede palm features two-way stretch for a snug, comfortable fit
• Three-ply, one-piece vented polyester back and thumb construction for maximum airflow
• Flexible thermoplastic rubber knuckle guards and shield logo
• Lycra expansion panels in finger joints for added dexterity
• Conductive stitching in fingers and thumb lets you operate smart screens
• Rugged single- and double-needle polyester stitching throughout
• Adjustable wrist wrap with Velcro closure

Form & Function:

By providing a snug fit, our Anza glove reduces the chance of chafing on your palm and fingers. A double-stitched reinforcement panel on the thumb and index finger adds strength to the friction zone between your hands and the grips. Stylish thermoplastic rubber knuckle guards on the back of the glove provide another layer of protection from rocky roost and airborne road debris.

Our American-made racing jerseys are carefully hand-crafted by our buds at Hot Shoppe and feature 100% plated polyester construction with sublimated color blocking and graphics.

Topped with a comfortable woven round collar and extra-narrow cuffs.

Front and back shoulder/yoke panels feature micro-ventilated weave for maximum cooling.

Checkers on the sides let the competition know you’re serious but the badges on shoulders remind ‘em that you’re also here for a good time!

These run tight for athletic builds. Go up one size from your standard t- shirt, or two sizes up to fit comfortably over protective gear like elbow guards and under-the-jersey body armor.

The 80's ruled on so many levels.

Our latest moto jersey channels that cheesy aesthetic that we can't get enough of.

These American-made racing jerseys are carefully hand-crafted by our friends at Hot Shoppe and feature 100% plated polyester construction with sublimated color blocking and graphics. Topped with a comfortable woven round collar and extra-narrow cuffs.

Front and back shoulder/yoke panels feature micro-ventilated weave for maximum cooling.

The back panels are left extra-plain so you can add your name and race number if you are that serious.

These high-performance jerseys run tight for athletic builds. Go up one size from your standard t- shirt, or two sizes up to fit comfortably over protective gear like elbow guards and under-the-jersey body armour.

The ‘80s were the Golden Age of American motocross, when advances in gear design and material technology moved even faster than the legends who wore the stuff. That era and those riders were the inspiration for our new Baja glove.

Features:

• Goatskin palm and thumb reinforcement for added toughness in these high friction areas
• Synthetic suede palm and thumb construction for a snug, comfortable fit
• Stretch polyester construction on ring and pinkie fingers for maximum flexibility
• Three-ply woven mesh back panel for ventilation for comfort
• Conductive stitching in fingers and thumb lets you operate smart screens
• Molded two-ply neoprene wrist wrap with adjustable Velcro closure
• Lycra expansion panels in finger joints for added dexterity
• Rugged single- and double-needle polyester stitching throughout
• Thermoplastic rubber lightning bolt knuckle protector
• 5mm thick hidden internal neoprene knuckle guard
• Goatskin fingertips for extra durability
• Fully CE certified

Form & Function:

Modern motocross gloves have evolved into little more than a nylon sock for your hands—very little padding, and virtually no real leather for protection where you need it. Baja gloves buck this trend by combining goatskin reinforcement in friction zones with internal impact protection to create a cool, comfortable glove for aggressive riding on tracks, trails, or tarmac.

The ‘80s were the Golden Age of American motocross, when advances in gear design and material technology moved even faster than the legends who wore the stuff. That era and those riders were the inspiration for our new Baja glove.

Features:

• Goatskin palm and thumb reinforcement for added toughness in these high friction areas
• Synthetic suede palm and thumb construction for a snug, comfortable fit
• Stretch polyester construction on ring and pinkie fingers for maximum flexibility
• Three-ply woven mesh back panel for ventilation for comfort
• Conductive stitching in fingers and thumb lets you operate smart screens
• Molded two-ply neoprene wrist wrap with adjustable Velcro closure
• Lycra expansion panels in finger joints for added dexterity
• Rugged single- and double-needle polyester stitching throughout
• Thermoplastic rubber lightning bolt knuckle protector
• 5mm thick hidden internal neoprene knuckle guard
• Goatskin fingertips for extra durability
• Fully CE certified

Form & Function:

Modern motocross gloves have evolved into little more than a nylon sock for your hands—very little padding, and virtually no real leather for protection where you need it. Baja gloves buck this trend by combining goatskin reinforcement in friction zones with internal impact protection to create a cool, comfortable glove for aggressive riding on tracks, trails, or tarmac.

The Falcon blends the comfort and riding characteristics of a off road helmet with race-bred aerodynamics and performance.
Equipped with plush interiors and an extended peak, the Falcon will let you ride on in comfort.

Features:

• 2 Shell sizes.
• HIRP shell construction.
• Removable and washable lining
• Hypoallergenic fabrics
• Inner ventilation
• Multi density inner polystyrene
• Helmet base neck brace ready
• Sportcam support
• Double "D" ring
• ECE and DOT certified
• XS-M 1350g; L-2XL 1400g (+/- 50g)

The Falcon blends the comfort and riding characteristics of a off road helmet with race-bred aerodynamics and performance.
Equipped with plush interiors and an extended peak, the Falcon will let you ride on in comfort.

Features:

• 2 Shell sizes.
• HIRP shell construction.
• Removable and washable lining
• Hypoallergenic fabrics
• Inner ventilation
• Multi density inner polystyrene
• Helmet base neck brace ready
• Sportcam support
• Double "D" ring
• ECE and DOT certified
• XS-M 1350g; L-2XL 1400g (+/- 50g)

Historic shapes and colours meet modern design. The Legends helmets immortalize riders and achievements that will never be forgotten. Comfort, protection and ventilation are key elements of these helmets that meet today's highest standards.

Relive the 70's with the style that dominated adventure riding, the AGV X101 Helmet. A fiberglass constructed shell protects riders on the outside while the suede fabric interior keeps heads comfortable. The chin guard air vent was constructed to include a metal grill preventing dirt and debris from entering the helmet while cool air flows through. This goggle ready helmet also features a removable peak and fully removable cheek pads and helmet liner that are machine washable.

Features:

• Fiberglass construction
• 3 shell sizes
• Chin guard air vent
• Metal grill under the chin vent protects against dirt and debris
• Removable peak 
• Goggles ready
• Double D ring chinstrap
• Eco-leather and suede fabric interior
• Fully removable and washable liner and cheek pads

Keiti machined aluminium standard 'knurled' style valve caps. Inner o-rings prevent pressure leakage.

Sold in pairs.

Keiti machined aluminium standard 'knurled' style valve caps. Inner o-rings prevent pressure leakage.

Sold in pairs.

Keiti machined aluminium standard 'knurled' style valve caps. Inner o-rings prevent pressure leakage.

Sold in pairs.

Keiti machined aluminium standard 'knurled' style valve caps. Inner o-rings prevent pressure leakage.

Sold in pairs.

Mitroc F950 Scooter tyre. Offers great performance at an affordable price.

Keiti machined aluminium standard 'knurled' style valve caps. Inner o-rings prevent pressure leakage.

Sold in pairs.

Keiti machined aluminium standard 'knurled' style valve caps. Inner o-rings prevent pressure leakage.

Sold in pairs.

Keiti machined aluminium standard 'knurled' style valve caps. Inner o-rings prevent pressure leakage.

Sold in pairs.

Keiti machined aluminium 'Piston' style valve caps. Inner o-rings prevent pressure leakage.

Sold in pairs.

Keiti machined aluminium 'Piston' style valve caps. Inner o-rings prevent pressure leakage.

Sold in pairs.

Keiti machined aluminium 'Piston' style valve caps. Inner o-rings prevent pressure leakage.

Sold in pairs.

Keiti Tyre Pens give you a way to add colour to your tyres, reviving and personalizing your bike. Bring your tyres back to life!

Keiti Tyre Pens give you a way to add colour to your tyres, reviving and personalizing your bike. Bring your tyres back to life!

The Falcon blends the comfort and riding characteristics of a off road helmet with race-bred aerodynamics and performance.
Equipped with plush interiors and an extended peak, the Falcon will let you ride on in comfort.

Features:

• 2 Shell sizes.
• HIRP shell construction.
• Removable and washable lining
• Hypoallergenic fabrics
• Inner ventilation
• Multi density inner polystyrene
• Helmet base neck brace ready
• Sportcam support
• Double "D" ring
• ECE and DOT certified
• XS-M 1350g; L-2XL 1400g (+/- 50g)

Keiti machined aluminium standard 'knurled' style valve caps. Inner o-rings prevent pressure leakage.

Sold in pairs.