Road

1" O.D, Smooth for custom applications - these have no slots, dimples or castellated ends. We have TBW versions available also.

Refer to diagram for dimensions.

The top-selling handlebar in our range, and for good reason. Our Tracker bars come in two O.D.'s and three heights, and look great in any stock or aftermarket riser you can imagine. These handlebars are constructed with seamless CNC mandrel bent 0.120” wall 4130 chromoly tubes. Available in two styles: Smooth bars are for custom applications and have no slots, dimples or castellated ends. TBW w/ insert handlebars work with regular, cable-operated throttles, and if you remove the black end plug it will accept Harley's Throttle-By-Wire control module. These bars have slots on each side for stock H-D hand controls and an exit slot in the center for internal wiring.

Features:

• Seamless 0.120" (3mm) wall 4130 chromoly construction
• Precision mandrel-bent tubing for comfortable, precise ergonomics
• Black electroplate finish
• 1" O.D (7/8" option available), 18.4mm I.D
• 1" O.D. model available in smooth for custom application or TBW w/ insert for regular, cable-operated throttles, and if you remove the black end plug it will accept Harley's Throttle-By-Wire control module
• Technischer Überwachungsverein (Technical Inspection Association, or TüV) in Germany is an independent laboratory that tests the fatigue strength, manufacturing quality, and fitment for a wide range of consumer products, with special emphasis on automotive and motorcycle components and accessories. Biltwell handlebars and risers that have received TüV verification are among the strongest and most thoroughly well-tested motorcycle parts in the world.

Form & Function:

With a backsweep less severe than most stock handlebars, any Tracker in our range is a great replacement for riders who want to ditch the wheelbarrow feel of OE bars. When people ask for our advice on which Tracker to mate with any given Murdock riser, we recommend building a combo that puts your hands slightly below or even with the height of your shoulders when you're sitting comfortably on your motorcycle. Hands higher than shoulder height is popular, but it's a position better suited for experienced riders. If the cables and control wires on your bike prohibit going too tall or wide with your bars, combine our low or mid Tracker with some Slimline or Thunder risers for a clean, race-inspired, comfortable cockpit.

Patches are the unofficial freak flags of bikeriders worldwide, with members of the brotherhood (sisters, too) rocking them on riding gear for generations.

Our range of irreverent lifestyle accessories includes quality multi-colored patches, each one packed with enough silliness or seriousness to show folks where you stand.

This one's 3.5 inches in length (8.9CM).

This is the bag that started our EXFIL motorcycle luggage revolution. In military parlance "EXFIL" means to leave in a rapid, organized fashion—the way every smart bikerider likes to ride. The number means this EXFIL bag holds seven 350ml beer cans, and is a naming convention that carries throughout our moto luggage line.

Features:

• MOLLE system on exterior lets you attach and expand this bag with other bags and accessories
• Rugged, rust-free nylon zippers throughout
• Duraflex quick-release buckles with adjustable nylon straps for speedy installation
• UV-treated, 1680 denier polyester nylon construction
• PVC coated synthetic mounting straps with nickel-plated stainless buckles
• External chassis panels are PVC backed for added water resistance
• Interior volume holds seven 350ml / 12oz cans
• Hi-vis orange nylon interior makes spotting contents easier
• One main and three secondary pockets offer plenty of room for gear, maps, and other essentials

Install Tips:

Like all our luggage designs, you can mount EXFIL-7 anywhere. On our personal bikes we've mounted over-stuffed EXFIL-7's on the down tube, over the headlight on tall risers, and on both sides of the sissy bar. A pair of EXFIL-7's will hang perfectly on H-D fender struts to create a set of mini saddle bags. EXFIL-7's MOLLE system and reinforced PVC straps make all these options possible. Once mounted, EXFIL-7 gobbles up personal gear like wallets, pocket knives, phones, tools and other stuff to become the glove box most motorcycles need but don't have.

Like other leather/textile hybrids on the sport bike grid, our Bridgeport gloves feature rugged construction and a racy silhouette. Padding and reinforcement in key impact and friction zones means our most advanced three-season riding glove is ready for business when action heats up.

Features:

• Supple goatskin leather palm, fingertips, thumb, and friction zones
• Flexible thermoplastic rubber wrist tab with molded impact protection
• Anatomically shaped synthetic suede palm panel with Lycra flex zone
• Comfortable two-way stretch laminated neoprene wrist panel
• Ballistic nylon finger, hand, and knuckle guard panels
• Conductive stitching in fingers and thumb lets you operate smart screens
• Lycra expansion panels in finger joints for added dexterity
• Padded high-impact plastic knuckle guard with three-ply vented panel
• Silicone traction logo on palm
• Molded plastic finger vents
• Fully CE certified

Form & Function:

Building a premium glove is easier said than done. How do we know? Look at our competition. Most of the gloves in Bridgeport’s performance category look like props in a low-budget sci-fi movie. Bridgeport eschews over-the-top aesthetics to deliver comfortable, feature-packed protection for people who take riding seriously.

Like other leather/textile hybrids on the sport bike grid, our Bridgeport gloves feature rugged construction and a racy silhouette. Padding and reinforcement in key impact and friction zones means our most advanced three-season riding glove is ready for business when action heats up.

Features:

• Supple goatskin leather palm, fingertips, thumb, and friction zones
• Flexible thermoplastic rubber wrist tab with molded impact protection
• Anatomically shaped synthetic suede palm panel with Lycra flex zone
• Comfortable two-way stretch laminated neoprene wrist panel
• Ballistic nylon finger, hand, and knuckle guard panels
• Conductive stitching in fingers and thumb lets you operate smart screens
• Lycra expansion panels in finger joints for added dexterity
• Padded high-impact plastic knuckle guard with three-ply vented panel
• Silicone traction logo on palm
• Molded plastic finger vents
• Fully CE certified

Form & Function:

Building a premium glove is easier said than done. How do we know? Look at our competition. Most of the gloves in Bridgeport’s performance category look like props in a low-budget sci-fi movie. Bridgeport eschews over-the-top aesthetics to deliver comfortable, feature-packed protection for people who take riding seriously.

Like other leather/textile hybrids on the sport bike grid, our Bridgeport gloves feature rugged construction and a racy silhouette. Padding and reinforcement in key impact and friction zones means our most advanced three-season riding glove is ready for business when action heats up.

Features:

• Supple goatskin leather palm, fingertips, thumb, and friction zones
• Flexible thermoplastic rubber wrist tab with molded impact protection
• Anatomically shaped synthetic suede palm panel with Lycra flex zone
• Comfortable two-way stretch laminated neoprene wrist panel
• Ballistic nylon finger, hand, and knuckle guard panels
• Conductive stitching in fingers and thumb lets you operate smart screens
• Lycra expansion panels in finger joints for added dexterity
• Padded high-impact plastic knuckle guard with three-ply vented panel
• Silicone traction logo on palm
• Molded plastic finger vents
• Fully CE certified

Form & Function:

Building a premium glove is easier said than done. How do we know? Look at our competition. Most of the gloves in Bridgeport’s performance category look like props in a low-budget sci-fi movie. Bridgeport eschews over-the-top aesthetics to deliver comfortable, feature-packed protection for people who take riding seriously.

The ‘80s were the Golden Age of American motocross, when advances in gear design and material technology moved even faster than the legends who wore the stuff. That era and those riders were the inspiration for our new Baja glove.

Features:

• Goatskin palm and thumb reinforcement for added toughness in these high friction areas
• Synthetic suede palm and thumb construction for a snug, comfortable fit
• Stretch polyester construction on ring and pinkie fingers for maximum flexibility
• Three-ply woven mesh back panel for ventilation for comfort
• Conductive stitching in fingers and thumb lets you operate smart screens
• Molded two-ply neoprene wrist wrap with adjustable Velcro closure
• Lycra expansion panels in finger joints for added dexterity
• Rugged single- and double-needle polyester stitching throughout
• Thermoplastic rubber lightning bolt knuckle protector
• 5mm thick hidden internal neoprene knuckle guard
• Goatskin fingertips for extra durability
• Fully CE certified

Form & Function:

Modern motocross gloves have evolved into little more than a nylon sock for your hands—very little padding, and virtually no real leather for protection where you need it. Baja gloves buck this trend by combining goatskin reinforcement in friction zones with internal impact protection to create a cool, comfortable glove for aggressive riding on tracks, trails, or tarmac.

Borrego features the same 100% leather construction and comfort/safety features as our Belden model, but eschews thermal insulation in favour of a moisture-wicking fleece half liner for three-season riding.

Features:

• 100% cowhide construction on exterior for durability and abrasion resistance
• Suede friction zones with strategic padding for impact protection
• Moisture-wicking fleece Lycra half liner inside for breathability and comfort
• Perforated palm panels increase durability without compromising flex
• Internal padded high-impact plastic knuckle guards
• Wide elastic Velcro wrist closure with thermoplastic rubber Biltwell pull tab
• Smart screen-compatible thumb and finger
• Fully CE certified

Form & Function:

Borrego and its cold-weather sibling Belden are the most feature-rich, full cowhide gloves in our gear line. Features include a leather exterior for durability and abrasion resistance, and a wide elasticated wrist wrap for adjustability and comfort. Available in a broad range of colours and six sizes from XS to XXL.

Borrego features the same 100% leather construction and comfort/safety features as our Belden model, but eschews thermal insulation in favour of a moisture-wicking fleece half liner for three-season riding.

Features:

• 100% cowhide construction on exterior for durability and abrasion resistance
• Suede friction zones with strategic padding for impact protection
• Moisture-wicking fleece Lycra half liner inside for breathability and comfort
• Perforated palm panels increase durability without compromising flex
• Internal padded high-impact plastic knuckle guards
• Wide elastic Velcro wrist closure with thermoplastic rubber Biltwell pull tab
• Smart screen-compatible thumb and finger
• Fully CE certified

Form & Function:

Borrego and its cold-weather sibling Belden are the most feature-rich, full cowhide gloves in our gear line. Features include a leather exterior for durability and abrasion resistance, and a wide elasticated wrist wrap for adjustability and comfort. Available in a broad range of colours and six sizes from XS to XXL.

Borrego features the same 100% leather construction and comfort/safety features as our Belden model, but eschews thermal insulation in favour of a moisture-wicking fleece half liner for three-season riding.

Features:

• 100% cowhide construction on exterior for durability and abrasion resistance
• Suede friction zones with strategic padding for impact protection
• Moisture-wicking fleece Lycra half liner inside for breathability and comfort
• Perforated palm panels increase durability without compromising flex
• Internal padded high-impact plastic knuckle guards
• Wide elastic Velcro wrist closure with thermoplastic rubber Biltwell pull tab
• Smart screen-compatible thumb and finger
• Fully CE certified

Form & Function:

Borrego and its cold-weather sibling Belden are the most feature-rich, full cowhide gloves in our gear line. Features include a leather exterior for durability and abrasion resistance, and a wide elasticated wrist wrap for adjustability and comfort. Available in a broad range of colours and six sizes from XS to XXL.

Our Belden glove features an internal insulation layer with moisture wicking technology to provide maximum protection in cold, wet weather. One-hundred-percent leather construction and an arsenal of other creature comforts makes this Biltwell glove a top choice for Winter riding.

Features:

• 100% cowhide construction on exterior for durability and abrasion resistance
• Suede friction zones with strategic padding for impact protection
• Wind- and water-resistant internal thermal barrier for warmth and dryness
• Moisture-wicking fleece Lycra liner for comfort
• Perforated palm panels increase durability without compromising flex
• Padded internal high-impact plastic knuckle guards
• Wide elastic Velcro wrist closure with thermoplastic rubber Biltwell pull tab
• Smart screen-compatible thumb and fingertips
• Fully CE certified

Form & Function:

Belden and its warm-weather sibling Borrego are the most feature-rich, full cowhide gloves in our gear line. Features include a leather exterior for durability and abrasion resistance, and a wide elasticated wrist wrap for adjustability and comfort. Available in a broad range of colours and six sizes from XS to XXL.

Our Belden glove features an internal insulation layer with moisture wicking technology to provide maximum protection in cold, wet weather. One-hundred-percent leather construction and an arsenal of other creature comforts makes this Biltwell glove a top choice for Winter riding.

Features:

• 100% cowhide construction on exterior for durability and abrasion resistance
• Suede friction zones with strategic padding for impact protection
• Wind- and water-resistant internal thermal barrier for warmth and dryness
• Moisture-wicking fleece Lycra liner for comfort
• Perforated palm panels increase durability without compromising flex
• Padded internal high-impact plastic knuckle guards
• Wide elastic Velcro wrist closure with thermoplastic rubber Biltwell pull tab
• Smart screen-compatible thumb and fingertips
• Fully CE certified

Form & Function:

Belden and its warm-weather sibling Borrego are the most feature-rich, full cowhide gloves in our gear line. Features include a leather exterior for durability and abrasion resistance, and a wide elasticated wrist wrap for adjustability and comfort. Available in a broad range of colours and six sizes from XS to XXL.

Progressively styled and rigorously tested, our ECE-certified helmet is a top choice for riders who demand comfort and high performance. Features include a rugged ABS outer shell, ventilated EPS safety liner, replaceable comfort liner and a clear anti-fog shield.

Features:

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad features front and side vents for airflow
• CE-certified polycarbonate shield includes anti-fog and anti-scratch treatments for safety and durability
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Molded recesses inside EPS interior shell accept select aftermarket audio and communication components
• Rugged shield hinge hardware with robust detents allows you to open the shield at slow speeds for increased airflow

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

The most affordable helmet on the market, with the highest safety homologation. The MT Thunder 4 SV represents all the drive and technological evolution of MT Helmets.

The arrival of the new ECE 22.06 certification has made MT Helmets a specialist in safety homologations and sends a very clear message to the industry: now safety on a bike is within everyone’s reach.

Features:

• HIRP Shell (High Impact Resistant Polymer) for excellent impact response. 2 Shell Sizes
• Three-Point Protector System – The base of this helmet has a three-point support system that has been developed to provide good stability when the Thunder 4 SV is placed on flat surfaces. This makes it easier to handle the helmet for cleaning or maintenance, but also allows the elements inside the helmet to be insulated from the surface, protecting them from chafing and, above all, enhancing hygiene when using the helmet
• Airflow Channel System – Through fluid dynamics analysis, air channels have been designed to minimize air resistance and boost internal ventilation flow, reducing temperature and moisture inside the helmet
• Reduced Aero Drag Design – An aerodynamic design studied by the MT Helmets engineering team to reduce aerodynamic resistance as much as possible
• Racing Spoiler
   
• ECE R-22.06 (EU) Approved. This helmet exceeds the highest safety standards and has passed, since its launch, the new ECE 22.06 test required for the European market
• Micrometric Double Toothed Closure – Redesigned micrometric retention system to keep the helmet always fastened and secured. The MT Helmets engineering department has developed this system to ensure that the fastener is locked by at least two points, ensuring that the system is secured. This locking system, optimal for sport-touring models, offers the best balance between wearing comfort and safety
• 1650 (+/-50) grams, its weight is well distributed
   
• Quick Visor Swap System – A system designed in-house by the MT Helmets Engineering team. The first helmet to feature this technology. This system, which has been patented by MT Helmets, allows the rider to attach/detach the visor really quickly and comfortably without having to take the helmet off
• Extended Vision Area – The extended vision area allows riders to have better visibility of their surroundings, increasing ride comfort and improving the riding experience and safety on the bike
• Extended Sun Visor Protection – Retractable sun visor system offering extended protection, preventing distortion due to changes in light conditions. It comes with a mechanism that can be quickly and comfortably used with one hand. It is also detachable for easy cleaning and maintenance.
• Pinlock 100% Max Vision – The Thunder 4 SV features space for a Pinlock 100% Max Vision insert
   
• The interior pads have been developed specifically for each helmet size to fit all head sizes in an optimal way
• The materials used for the manufacture of these elements combine different fabrics that favor ventilation, exhaust moisture, and drying quickly
• Removable and washable liners that allow you to keep your helmet clean and fresh
• Emergency Release System – Quick release system for side pads for removing the helmet in case of an accident. This system prevents possible damage during a helmet removal maneuver
• Universal Intercom Cage – This helmet has been developed taking into account the needs arising from the incorporation of an intercom system and has specific spaces to fit an intercom communication system

MT’s do-it-all go anywhere helmet. For the urban commute or the long tour, the new Thunder 3 SV will accommodate any ride you throw at it. A multi dimensional fit and available in 2 shell sizes, this helmet will comfortably fit most head shapes. Features an internal drop down visor and a Pinlock Max vision visor.

Features:

• 4/5 Star Sharp Rating
• Drop Down Inner Sun Visor
• Hi-Impact Absorption Inner Shell
• Multiple Density EPS Liner
• Optimum Visor Closing
• Homologated Front Protection “P”
• Quick Release Micrometric Buckle
• 2 Outer Shell Sizes
• Pinlock Max Vision Visor
• Removable And Washable Liner
• Optically Correct Anti Scratch Polycarbonate Visor
• Quick Release Visor
• Aerodynamic Design
• Vent System
• ECE/ONU.22.05.P
• NBR7471
• NTC 4533
• ACU Gold Standard
• Glow In The Dark Features
• MT-V-12 Pinlock Max visor

The Brixton Wax jacket oozes cool but comes with CE level protection as standard.

Made from a heavy duty and robust HD wax cotton and reinforced with DuPont™ Kevlar, the quilted stitched detailing enhances the vintage feel of the jacket.

The jacket comes with CE Level 2 Hexa shoulder and elbow armour and a pocket for the back protector. Additionally, the jacket has a removable quilted thermal lining, to keep you warm whilst riding in cooler climates, and has ventilation points at the chest and rear of the jacket to support airflow in, through and out of the jacket for optimum comfort whilst riding.

The Brixton can be tailored to suit your body via the waist and cuff adjusters. These features along with the stretch panelling around the elbows offer great freedom of movement and a more relaxing ride.

ARMOUR

• CE Certification Rating: A
• Back Protector: Pocket Only
• Shoulder Armour: CE Level 2 Hexa
• Elbow Armour: CE Level 2 Hexa

CONSTRUCTION

• Main Outer Material: HD Wax
• Reinforcement: Kevlar Fibre
• Thermal Lining: Removable Quilted Thermal Full Lining
• Inner Lining: Removable Quilted Full Lining
• Zips: Max Zips
• Thread: Bonded Nylon - Triple Stitched
• Ventilation: Chest Vents
• Connection Zip: No

FEATURES & BENEFITS

• Adjustment: Cuff & Waist Adjusters

The most affordable helmet on the market, with the highest safety homologation. The MT Thunder 4 SV represents all the drive and technological evolution of MT Helmets.

The arrival of the new ECE 22.06 certification has made MT Helmets a specialist in safety homologations and sends a very clear message to the industry: now safety on a bike is within everyone’s reach.

Features:

• HIRP Shell (High Impact Resistant Polymer) for excellent impact response. 2 Shell Sizes
• Three-Point Protector System – The base of this helmet has a three-point support system that has been developed to provide good stability when the Thunder 4 SV is placed on flat surfaces. This makes it easier to handle the helmet for cleaning or maintenance, but also allows the elements inside the helmet to be insulated from the surface, protecting them from chafing and, above all, enhancing hygiene when using the helmet
• Airflow Channel System – Through fluid dynamics analysis, air channels have been designed to minimize air resistance and boost internal ventilation flow, reducing temperature and moisture inside the helmet
• Reduced Aero Drag Design – An aerodynamic design studied by the MT Helmets engineering team to reduce aerodynamic resistance as much as possible
• Racing Spoiler
   
• ECE R-22.06 (EU) Approved. This helmet exceeds the highest safety standards and has passed, since its launch, the new ECE 22.06 test required for the European market
• Micrometric Double Toothed Closure – Redesigned micrometric retention system to keep the helmet always fastened and secured. The MT Helmets engineering department has developed this system to ensure that the fastener is locked by at least two points, ensuring that the system is secured. This locking system, optimal for sport-touring models, offers the best balance between wearing comfort and safety
• 1650 (+/-50) grams, its weight is well distributed
   
• Quick Visor Swap System – A system designed in-house by the MT Helmets Engineering team. The first helmet to feature this technology. This system, which has been patented by MT Helmets, allows the rider to attach/detach the visor really quickly and comfortably without having to take the helmet off
• Extended Vision Area – The extended vision area allows riders to have better visibility of their surroundings, increasing ride comfort and improving the riding experience and safety on the bike
• Extended Sun Visor Protection – Retractable sun visor system offering extended protection, preventing distortion due to changes in light conditions. It comes with a mechanism that can be quickly and comfortably used with one hand. It is also detachable for easy cleaning and maintenance.
• Pinlock 100% Max Vision – The Thunder 4 SV features space for a Pinlock 100% Max Vision insert
   
• The interior pads have been developed specifically for each helmet size to fit all head sizes in an optimal way
• The materials used for the manufacture of these elements combine different fabrics that favor ventilation, exhaust moisture, and drying quickly
• Removable and washable liners that allow you to keep your helmet clean and fresh
• Emergency Release System – Quick release system for side pads for removing the helmet in case of an accident. This system prevents possible damage during a helmet removal maneuver
• Universal Intercom Cage – This helmet has been developed taking into account the needs arising from the incorporation of an intercom system and has specific spaces to fit an intercom communication system

Keiti Reflective Wheel Stripes help your bike's wheels to stand out. Simple installation on a clean, dry surface.

3 stripes: 6mm wide x 7.5 metres long.

The best helmet for any use, made from technologies developed for MotoGP™.

AGV fulfill all of your motorcycle helmet needs by harvesting the best characteristics from sport and touring helmets and infusing them into the AGV K6 Helmet. Its shell is comprised of carbon and aramid fibres for excellent protection - the K6's protective capacity is 48% higher than that required by legislation. All this plus lightness like none other. The helmet's versatility comes from its aerodynamic shape that works well in any riding position. Four different shell sizes allow for a broad size range to better fit your particular head circumference and shape. Moisture wicking liners absorb sweat to keep you comfortable on extended rides. The AGV K6 Helmet is the culmination of all of AGV's road helmet technology to create a single helmet for all riders. 

Features:

• Carbon-aramid shell
• 4 shell sizes: XS-SM, MS, ML-LG, XL-2XL
• 5 density EPS in 4 sizes
• Collarbone safe profile
• 5 adjustable front vents
• 1 wide rear vent
• Shell shaped designed to reduce turbulence and optimized for all riding positions
• Ritmo and Shalimar fabric cheek pads
• Shalimar fabric head liner
• Abrasion and water resistance neck roll for extra durability
• 2Dry moisture wicking system
• Eyeglasses friendly fit
• Removable breath guard included
• K6 helmet specific 4mm thick, anti-scratch Pinlock-ready visor
• Pinlock lens insert included
• Innovative shield pivot reduces size and weight
• Double-D chinstrap
• DOT and ECE approved

Keiti machined aluminium standard 'knurled' style valve caps. Inner o-rings prevent pressure leakage.

Sold in pairs.

Keiti machined aluminium standard 'knurled' style valve caps. Inner o-rings prevent pressure leakage.

Sold in pairs.

Keiti machined aluminium standard 'knurled' style valve caps. Inner o-rings prevent pressure leakage.

Sold in pairs.

Keiti machined aluminium standard 'knurled' style valve caps. Inner o-rings prevent pressure leakage.

Sold in pairs.

Keiti Swingarm Spools are CNC-machined from billet aluminum, and are anodized to prevent premature fading.

Includes all mounting hardware, sold as a pair.