Road

There's nothing stingy about the Stinger 2 helmet.

This sporty, entry-level model offers high-end performance and features for an incredibly competitive price.

The MT Stinger 2 has the latest ECE22.06 safety requirements. This full face helmet has been improved in many ways, but still proves that MT excels in affordable high performance helmets. The new Stinger 2 features a larger spoiler for better aerodynamics at higher speeds, the ventilation has been improved for even more comfort, even on the most sunny days. The helmet is equipped with a MaxVision pinlock prepared visor for a large field of view, resulting in a lot of safety on the road. The MaxVision Pinlock can be ordered in the bundle.

With comfort in mind, the Stinger 2 is equipped with a nice wide collar and wind guard to reduce wind noise and improve comfort. The inner lining is fully removable and washable. The helmet is equipped with a steel micrometic chin closure that can be easily operated with gloves on. This new MT Stinger 2 is therefore extremely suitable for moped and scooter use, or for the novice motorcyclist.

Key Features
• Lightweight HIRP (High Impact Resistant Polymer) shell
• 1 outer shell size
• Hi-impact absorption inner shell
• Homologated front protection "P"
• Multiple density EPS liner
• Anti-allergenic, breathable, moisture-wicking fabric blend for comfort and durability
• Removable and washable liner
• Perfect fit thanks to different interior sizes
• Breath deflector to prevent screen fogging
• Prepared for an intercom system
• Micrometric buckle
• Visor: MT-V-28B
• High-quality optical polycarbonate visor with quick release and pivoting visor mechanism
• Pinlock MaxVision insert ready: DKS435
• Front and top air vents with open/close system
• Interior air flow channels for temperature and moisture management
• Air extraction through rear vents to maximise airflow
• Rear deflector optimises the aerodynamics of this helmet
• Weight: 1450 grams (+/- 50 grams)
• ECE 22.06

There's nothing stingy about the Stinger 2 helmet.

This sporty, entry-level model offers high-end performance and features for an incredibly competitive price.

The MT Stinger 2 has the latest ECE22.06 safety requirements. This full face helmet has been improved in many ways, but still proves that MT excels in affordable high performance helmets. The new Stinger 2 features a larger spoiler for better aerodynamics at higher speeds, the ventilation has been improved for even more comfort, even on the most sunny days. The helmet is equipped with a MaxVision pinlock prepared visor for a large field of view, resulting in a lot of safety on the road. The MaxVision Pinlock can be ordered in the bundle.

With comfort in mind, the Stinger 2 is equipped with a nice wide collar and wind guard to reduce wind noise and improve comfort. The inner lining is fully removable and washable. The helmet is equipped with a steel micrometic chin closure that can be easily operated with gloves on. This new MT Stinger 2 is therefore extremely suitable for moped and scooter use, or for the novice motorcyclist.

Key Features
• Lightweight HIRP (High Impact Resistant Polymer) shell
• 1 outer shell size
• Hi-impact absorption inner shell
• Homologated front protection "P"
• Multiple density EPS liner
• Anti-allergenic, breathable, moisture-wicking fabric blend for comfort and durability
• Removable and washable liner
• Perfect fit thanks to different interior sizes
• Breath deflector to prevent screen fogging
• Prepared for an intercom system
• Micrometric buckle
• Visor: MT-V-28B
• High-quality optical polycarbonate visor with quick release and pivoting visor mechanism
• Pinlock MaxVision insert ready: DKS435
• Front and top air vents with open/close system
• Interior air flow channels for temperature and moisture management
• Air extraction through rear vents to maximise airflow
• Rear deflector optimises the aerodynamics of this helmet
• Weight: 1450 grams (+/- 50 grams)
• ECE 22.06

There's nothing stingy about the Stinger 2 helmet.

This sporty, entry-level model offers high-end performance and features for an incredibly competitive price.

The MT Stinger 2 has the latest ECE22.06 safety requirements. This full face helmet has been improved in many ways, but still proves that MT excels in affordable high performance helmets. The new Stinger 2 features a larger spoiler for better aerodynamics at higher speeds, the ventilation has been improved for even more comfort, even on the most sunny days. The helmet is equipped with a MaxVision pinlock prepared visor for a large field of view, resulting in a lot of safety on the road. The MaxVision Pinlock can be ordered in the bundle.

With comfort in mind, the Stinger 2 is equipped with a nice wide collar and wind guard to reduce wind noise and improve comfort. The inner lining is fully removable and washable. The helmet is equipped with a steel micrometic chin closure that can be easily operated with gloves on. This new MT Stinger 2 is therefore extremely suitable for moped and scooter use, or for the novice motorcyclist.

Key Features
• Lightweight HIRP (High Impact Resistant Polymer) shell
• 1 outer shell size
• Hi-impact absorption inner shell
• Homologated front protection "P"
• Multiple density EPS liner
• Anti-allergenic, breathable, moisture-wicking fabric blend for comfort and durability
• Removable and washable liner
• Perfect fit thanks to different interior sizes
• Breath deflector to prevent screen fogging
• Prepared for an intercom system
• Micrometric buckle
• Visor: MT-V-28B
• High-quality optical polycarbonate visor with quick release and pivoting visor mechanism
• Pinlock MaxVision insert ready: DKS435
• Front and top air vents with open/close system
• Interior air flow channels for temperature and moisture management
• Air extraction through rear vents to maximise airflow
• Rear deflector optimises the aerodynamics of this helmet
• Weight: 1450 grams (+/- 50 grams)
• ECE 22.06

The most affordable helmet on the market, with the highest safety homologation. The MT Thunder 4 SV represents all the drive and technological evolution of MT Helmets.

The arrival of the new ECE 22.06 certification has made MT Helmets a specialist in safety homologations and sends a very clear message to the industry: now safety on a bike is within everyone’s reach.

Features:

• HIRP Shell (High Impact Resistant Polymer) for excellent impact response. 2 Shell Sizes
• Three-Point Protector System – The base of this helmet has a three-point support system that has been developed to provide good stability when the Thunder 4 SV is placed on flat surfaces. This makes it easier to handle the helmet for cleaning or maintenance, but also allows the elements inside the helmet to be insulated from the surface, protecting them from chafing and, above all, enhancing hygiene when using the helmet
• Airflow Channel System – Through fluid dynamics analysis, air channels have been designed to minimize air resistance and boost internal ventilation flow, reducing temperature and moisture inside the helmet
• Reduced Aero Drag Design – An aerodynamic design studied by the MT Helmets engineering team to reduce aerodynamic resistance as much as possible
• Racing Spoiler
   
• ECE R-22.06 (EU) Approved. This helmet exceeds the highest safety standards and has passed, since its launch, the new ECE 22.06 test required for the European market
• Micrometric Double Toothed Closure – Redesigned micrometric retention system to keep the helmet always fastened and secured. The MT Helmets engineering department has developed this system to ensure that the fastener is locked by at least two points, ensuring that the system is secured. This locking system, optimal for sport-touring models, offers the best balance between wearing comfort and safety
• 1650 (+/-50) grams, its weight is well distributed
   
• Quick Visor Swap System – A system designed in-house by the MT Helmets Engineering team. The first helmet to feature this technology. This system, which has been patented by MT Helmets, allows the rider to attach/detach the visor really quickly and comfortably without having to take the helmet off
• Extended Vision Area – The extended vision area allows riders to have better visibility of their surroundings, increasing ride comfort and improving the riding experience and safety on the bike
• Extended Sun Visor Protection – Retractable sun visor system offering extended protection, preventing distortion due to changes in light conditions. It comes with a mechanism that can be quickly and comfortably used with one hand. It is also detachable for easy cleaning and maintenance.
• Pinlock 100% Max Vision – The Thunder 4 SV features space for a Pinlock 100% Max Vision insert
   
• The interior pads have been developed specifically for each helmet size to fit all head sizes in an optimal way
• The materials used for the manufacture of these elements combine different fabrics that favor ventilation, exhaust moisture, and drying quickly
• Removable and washable liners that allow you to keep your helmet clean and fresh
• Emergency Release System – Quick release system for side pads for removing the helmet in case of an accident. This system prevents possible damage during a helmet removal maneuver
• Universal Intercom Cage – This helmet has been developed taking into account the needs arising from the incorporation of an intercom system and has specific spaces to fit an intercom communication system

There's nothing stingy about the Stinger 2 helmet.

This sporty, entry-level model offers high-end performance and features for an incredibly competitive price.

The MT Stinger 2 has the latest ECE22.06 safety requirements. This full face helmet has been improved in many ways, but still proves that MT excels in affordable high performance helmets. The new Stinger 2 features a larger spoiler for better aerodynamics at higher speeds, the ventilation has been improved for even more comfort, even on the most sunny days. The helmet is equipped with a MaxVision pinlock prepared visor for a large field of view, resulting in a lot of safety on the road. The MaxVision Pinlock can be ordered in the bundle.

With comfort in mind, the Stinger 2 is equipped with a nice wide collar and wind guard to reduce wind noise and improve comfort. The inner lining is fully removable and washable. The helmet is equipped with a steel micrometic chin closure that can be easily operated with gloves on. This new MT Stinger 2 is therefore extremely suitable for moped and scooter use, or for the novice motorcyclist.

Key Features
• Lightweight HIRP (High Impact Resistant Polymer) shell
• 1 outer shell size
• Hi-impact absorption inner shell
• Homologated front protection "P"
• Multiple density EPS liner
• Anti-allergenic, breathable, moisture-wicking fabric blend for comfort and durability
• Removable and washable liner
• Perfect fit thanks to different interior sizes
• Breath deflector to prevent screen fogging
• Prepared for an intercom system
• Micrometric buckle
• Visor: MT-V-28B
• High-quality optical polycarbonate visor with quick release and pivoting visor mechanism
• Pinlock MaxVision insert ready: DKS435
• Front and top air vents with open/close system
• Interior air flow channels for temperature and moisture management
• Air extraction through rear vents to maximise airflow
• Rear deflector optimises the aerodynamics of this helmet
• Weight: 1450 grams (+/- 50 grams)
• ECE 22.06

The most affordable helmet on the market, with the highest safety homologation. The MT Thunder 4 SV represents all the drive and technological evolution of MT Helmets.

The arrival of the new ECE 22.06 certification has made MT Helmets a specialist in safety homologations and sends a very clear message to the industry: now safety on a bike is within everyone’s reach.

Features:

• HIRP Shell (High Impact Resistant Polymer) for excellent impact response. 2 Shell Sizes
• Three-Point Protector System – The base of this helmet has a three-point support system that has been developed to provide good stability when the Thunder 4 SV is placed on flat surfaces. This makes it easier to handle the helmet for cleaning or maintenance, but also allows the elements inside the helmet to be insulated from the surface, protecting them from chafing and, above all, enhancing hygiene when using the helmet
• Airflow Channel System – Through fluid dynamics analysis, air channels have been designed to minimize air resistance and boost internal ventilation flow, reducing temperature and moisture inside the helmet
• Reduced Aero Drag Design – An aerodynamic design studied by the MT Helmets engineering team to reduce aerodynamic resistance as much as possible
• Racing Spoiler
   
• ECE R-22.06 (EU) Approved. This helmet exceeds the highest safety standards and has passed, since its launch, the new ECE 22.06 test required for the European market
• Micrometric Double Toothed Closure – Redesigned micrometric retention system to keep the helmet always fastened and secured. The MT Helmets engineering department has developed this system to ensure that the fastener is locked by at least two points, ensuring that the system is secured. This locking system, optimal for sport-touring models, offers the best balance between wearing comfort and safety
• 1650 (+/-50) grams, its weight is well distributed
   
• Quick Visor Swap System – A system designed in-house by the MT Helmets Engineering team. The first helmet to feature this technology. This system, which has been patented by MT Helmets, allows the rider to attach/detach the visor really quickly and comfortably without having to take the helmet off
• Extended Vision Area – The extended vision area allows riders to have better visibility of their surroundings, increasing ride comfort and improving the riding experience and safety on the bike
• Extended Sun Visor Protection – Retractable sun visor system offering extended protection, preventing distortion due to changes in light conditions. It comes with a mechanism that can be quickly and comfortably used with one hand. It is also detachable for easy cleaning and maintenance.
• Pinlock 100% Max Vision – The Thunder 4 SV features space for a Pinlock 100% Max Vision insert
   
• The interior pads have been developed specifically for each helmet size to fit all head sizes in an optimal way
• The materials used for the manufacture of these elements combine different fabrics that favor ventilation, exhaust moisture, and drying quickly
• Removable and washable liners that allow you to keep your helmet clean and fresh
• Emergency Release System – Quick release system for side pads for removing the helmet in case of an accident. This system prevents possible damage during a helmet removal maneuver
• Universal Intercom Cage – This helmet has been developed taking into account the needs arising from the incorporation of an intercom system and has specific spaces to fit an intercom communication system

Progressively styled and rigorously tested, our ECE-certified helmet is a top choice for riders who demand comfort and high performance. Features include a rugged ABS outer shell, ventilated EPS safety liner, replaceable comfort liner and a clear anti-fog shield.

Features:

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad features front and side vents for airflow
• CE-certified polycarbonate shield includes anti-fog and anti-scratch treatments for safety and durability
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Molded recesses inside EPS interior shell accept select aftermarket audio and communication components
• Rugged shield hinge hardware with robust detents allows you to open the shield at slow speeds for increased airflow

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

An old favorite but now with a new fit and new features. Our latest Gringo S helmet now meets the new European ECE 22.06 regs. The shield mechanism now uses the same anti-rattle closure featured on our Lane Splitter helmets. Three shell sizes replace the previous two for improved fit and comfort.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

An old favorite but now with a new fit and new features. Our latest Gringo S helmet now meets the new European ECE 22.06 regs. The shield mechanism now uses the same anti-rattle closure featured on our Lane Splitter helmets. Three shell sizes replace the previous two for improved fit and comfort.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved. We will have replacement shields in different tints available soon!

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

Gringo takes its '60s motorsport aesthetic and elevates it to modern ECE R22.05 motorcycle standards—the European test protocol recognized by leading helmet makers and independent safety labs as the toughest in the world.

Features:

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad dissipates energy during frontal impacts
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Molded recesses inside EPS designed to accept various aftermarket audio and communication components
• ECE R22.05 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

The AGV Extreme Safety construction protocol means that the new K1 S exceeds the requirements of the most recent international standards, making it even safer. The shell is made of high-resistance thermoplastic material for minimal encumbrance while the inner shell is in multidensity EPS. The safe profile is designed to prevent injury to the collarbone.

ECE22.06 Approved

K1 S is the road helmet that comes out of AGV's experience in MotoGP™, suitable for a range of uses on any route.

The aerodynamic shape of its shell made of high-resistance thermoplastic material, the front air vents developed through racing experience and the new Aero Spoiler designed in the wind tunnel maximize performance and provide stability even at high speeds in sports riding.

The Ultravision scratch-resistant panoramic visor offers a wider lateral and vertical view, for total control of the surrounding environment. Uncompromising comfort, due to the soft, removable and washable Dry-Comfort interior.

The AGV Extreme Safety construction protocol means that K1 S meets the requirements of the stringent ECE22.06 standard and then some.

AGV K1 S is prepared for the installation of communication systems.

The AGV Extreme Safety construction protocol means that the new K3 exceeds the requirements of the most recent international standards. K3 has in fact passed by a wide margin the tests required by the ECE22.06 homologation, making it even safer.

ECE22.06 Approved

An AGV icon, evolving towards perfection. K3 is AGV's full-face road helmet that takes all the characteristics of a versatile, safe helmet to outstanding levels.

It offers safety for all, at the highest levels - the shell made of high-resistance thermoplastic material, the multi-density EPS and the details such as the collarbone-protection profile and the protective visor allow K3 to obtain the strict ECE22.06 homologation. Due to the AGV Extreme Safety construction protocol, K3 meets the requirements of the most recent international standards and then some.

Its strength lies in its versatility. K3 is designed to put in its best performance in all situations. The built-in sun visor, which can be operated conveniently with gloves on, assists when it?s too bright, and doesn?t block the front ventilation when it's in the rest position. The Pinlock Max Vision antifog system guarantees maximum visibility even on the wettest and coldest days, when the temperature difference between the environment and the inside of the helmet could cause the visor to fog up dangerously. Not with K3. The Ultravision visor also guarantees a 190° horizontal field of vision, so you can see obstacles, the road and everything in front of you earlier and better.

K3 is prepared for the installation of communication systems. The Eyewear Ready interior design allows you to comfortably wear your eyeglasses or sunglasses while riding.

Comfort boosts performance. The aerodynamic profile of the K3 is designed to achieve a dynamic weight of zero at a cruising speed of 130 km/h. It means lower weight and less strain on the neck muscles, for maximum concentration on riding. The interiors, made of 2DRY material with rapid absorption of sweat and moisture, can be customized, to personalize the fit to the full and maximize how comfortable it feels. The ventilation achieves maximum efficiency through the air vents at the front and on the chin, precise and easy to operate with gloves on.

The practical micrometric steel closing system permits quick, safe adjustment of the helmet fastening.

The AGV Extreme Safety construction protocol means that the new K1 S exceeds the requirements of the most recent international standards, making it even safer. The shell is made of high-resistance thermoplastic material for minimal encumbrance while the inner shell is in multidensity EPS. The safe profile is designed to prevent injury to the collarbone.

ECE22.06 Approved

K1 S is the road helmet that comes out of AGV's experience in MotoGP™, suitable for a range of uses on any route.

The aerodynamic shape of its shell made of high-resistance thermoplastic material, the front air vents developed through racing experience and the new Aero Spoiler designed in the wind tunnel maximize performance and provide stability even at high speeds in sports riding.

The Ultravision scratch-resistant panoramic visor offers a wider lateral and vertical view, for total control of the surrounding environment. Uncompromising comfort, due to the soft, removable and washable Dry-Comfort interior.

The AGV Extreme Safety construction protocol means that K1 S meets the requirements of the stringent ECE22.06 standard and then some.

AGV K1 S is prepared for the installation of communication systems.

An old favorite but now with a new fit and new features. Our latest Gringo S helmet now meets the new European ECE 22.06 regs. The shield mechanism now uses the same anti-rattle closure featured on our Lane Splitter helmets. Three shell sizes replace the previous two for improved fit and comfort.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved. 

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

An old favorite but now with a new fit and new features. Our latest Gringo S helmet now meets the new European ECE 22.06 regs. The shield mechanism now uses the same anti-rattle closure featured on our Lane Splitter helmets. Three shell sizes replace the previous two for improved fit and comfort.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

An old favorite but now with a new fit and new features. Our latest Gringo S helmet now meets the new European ECE 22.06 regs. The shield mechanism now uses the same anti-rattle closure featured on our Lane Splitter helmets. Three shell sizes replace the previous two for improved fit and comfort.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved. We will have replacement shields in different tints available soon!

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

An old favorite but now with a new fit and new features. Our latest Gringo S helmet now meets the new European ECE 22.06 regs. The shield mechanism now uses the same anti-rattle closure featured on our Lane Splitter helmets. Three shell sizes replace the previous two for improved fit and comfort.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved. We will have replacement shields in different tints available soon!

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

The AGV Extreme Safety construction protocol means that the new K3 exceeds the requirements of the most recent international standards. K3 has in fact passed by a wide margin the tests required by the ECE22.06 homologation, making it even safer.

ECE22.06 Approved

An AGV icon, evolving towards perfection. K3 is AGV's full-face road helmet that takes all the characteristics of a versatile, safe helmet to outstanding levels.

It offers safety for all, at the highest levels - the shell made of high-resistance thermoplastic material, the multi-density EPS and the details such as the collarbone-protection profile and the protective visor allow K3 to obtain the strict ECE22.06 homologation. Due to the AGV Extreme Safety construction protocol, K3 meets the requirements of the most recent international standards and then some.

Its strength lies in its versatility. K3 is designed to put in its best performance in all situations. The built-in sun visor, which can be operated conveniently with gloves on, assists when it?s too bright, and doesn?t block the front ventilation when it's in the rest position. The Pinlock Max Vision antifog system guarantees maximum visibility even on the wettest and coldest days, when the temperature difference between the environment and the inside of the helmet could cause the visor to fog up dangerously. Not with K3. The Ultravision visor also guarantees a 190° horizontal field of vision, so you can see obstacles, the road and everything in front of you earlier and better.

K3 is prepared for the installation of communication systems. The Eyewear Ready interior design allows you to comfortably wear your eyeglasses or sunglasses while riding.

Comfort boosts performance. The aerodynamic profile of the K3 is designed to achieve a dynamic weight of zero at a cruising speed of 130 km/h. It means lower weight and less strain on the neck muscles, for maximum concentration on riding. The interiors, made of 2DRY material with rapid absorption of sweat and moisture, can be customized, to personalize the fit to the full and maximize how comfortable it feels. The ventilation achieves maximum efficiency through the air vents at the front and on the chin, precise and easy to operate with gloves on.

The practical micrometric steel closing system permits quick, safe adjustment of the helmet fastening.

The most affordable helmet on the market, with the highest safety homologation. The MT Thunder 4 SV represents all the drive and technological evolution of MT Helmets.

The arrival of the new ECE 22.06 certification has made MT Helmets a specialist in safety homologations and sends a very clear message to the industry: now safety on a bike is within everyone’s reach.

Features:

• HIRP Shell (High Impact Resistant Polymer) for excellent impact response. 2 Shell Sizes
• Three-Point Protector System – The base of this helmet has a three-point support system that has been developed to provide good stability when the Thunder 4 SV is placed on flat surfaces. This makes it easier to handle the helmet for cleaning or maintenance, but also allows the elements inside the helmet to be insulated from the surface, protecting them from chafing and, above all, enhancing hygiene when using the helmet
• Airflow Channel System – Through fluid dynamics analysis, air channels have been designed to minimize air resistance and boost internal ventilation flow, reducing temperature and moisture inside the helmet
• Reduced Aero Drag Design – An aerodynamic design studied by the MT Helmets engineering team to reduce aerodynamic resistance as much as possible
• Racing Spoiler
   
• ECE R-22.06 (EU) Approved. This helmet exceeds the highest safety standards and has passed, since its launch, the new ECE 22.06 test required for the European market
• Micrometric Double Toothed Closure – Redesigned micrometric retention system to keep the helmet always fastened and secured. The MT Helmets engineering department has developed this system to ensure that the fastener is locked by at least two points, ensuring that the system is secured. This locking system, optimal for sport-touring models, offers the best balance between wearing comfort and safety
• 1650 (+/-50) grams, its weight is well distributed
   
• Quick Visor Swap System – A system designed in-house by the MT Helmets Engineering team. The first helmet to feature this technology. This system, which has been patented by MT Helmets, allows the rider to attach/detach the visor really quickly and comfortably without having to take the helmet off
• Extended Vision Area – The extended vision area allows riders to have better visibility of their surroundings, increasing ride comfort and improving the riding experience and safety on the bike
• Extended Sun Visor Protection – Retractable sun visor system offering extended protection, preventing distortion due to changes in light conditions. It comes with a mechanism that can be quickly and comfortably used with one hand. It is also detachable for easy cleaning and maintenance.
• Pinlock 100% Max Vision – The Thunder 4 SV features space for a Pinlock 100% Max Vision insert
   
• The interior pads have been developed specifically for each helmet size to fit all head sizes in an optimal way
• The materials used for the manufacture of these elements combine different fabrics that favor ventilation, exhaust moisture, and drying quickly
• Removable and washable liners that allow you to keep your helmet clean and fresh
• Emergency Release System – Quick release system for side pads for removing the helmet in case of an accident. This system prevents possible damage during a helmet removal maneuver
• Universal Intercom Cage – This helmet has been developed taking into account the needs arising from the incorporation of an intercom system and has specific spaces to fit an intercom communication system

AGV’s latest version of this premium sport helmet now features a new construction for the inner liner, designed with high-performance fabrics and with no stitching in sensitive areas, making for an extremely comfortable fit.
The lightweight shell is made from a carbonfiberglass mix, while stability and aerodynamic performance are maximized thanks to an incorporated spoiler.
The Integrated Ventilation System (IVS) has vents that are hollowed into the shell, and there’s also an internal drop-down sun visor, a removable nose guard and a new wind protector that keeps noise to a minimum.

Features

• Shell in CAF (carbon-fiberglass)
• IVS (Integrated Ventilation System) with channels hollowed directly in the shell
• Double D retention system
• Sun visor
• Multi Density EPS
• The internal shape of the helmet was specifically designed to decrease the risk damage to the collar bones in the event of a fall
• Patented XQRS (Extra Quick Release System) visor mechanism in metal for very fast tool-free removal
• The visor is fitted with a patented micro-opening system
• Visor GT2 (ML-L-XL-XXL sizes) and GT2-1 (XS-S-MS sizes)
• Integrated spoiler
• Rear air extractors can be opened and closed
• Central air vent for optimal air flow
• Pinlock included in the box

AGV’s latest version of this premium sport helmet now features a new construction for the inner liner, designed with high-performance fabrics and with no stitching in sensitive areas, making for an extremely comfortable fit.
The lightweight shell is made from a carbonfiberglass mix, while stability and aerodynamic performance are maximized thanks to an incorporated spoiler.
The Integrated Ventilation System (IVS) has vents that are hollowed into the shell, and there’s also an internal drop-down sun visor, a removable nose guard and a new wind protector that keeps noise to a minimum.

Features

• Shell in CAF (carbon-fiberglass)
• IVS (Integrated Ventilation System) with channels hollowed directly in the shell
• Double D retention system
• Sun visor
• Multi Density EPS
• The internal shape of the helmet was specifically designed to decrease the risk damage to the collar bones in the event of a fall
• Patented XQRS (Extra Quick Release System) visor mechanism in metal for very fast tool-free removal
• The visor is fitted with a patented micro-opening system
• Visor GT2 (ML-L-XL-XXL sizes) and GT2-1 (XS-S-MS sizes)
• Integrated spoiler
• Rear air extractors can be opened and closed
• Central air vent for optimal air flow
• Pinlock included in the box

The AGV Extreme Safety construction protocol means that the new K3 exceeds the requirements of the most recent international standards. K3 has in fact passed by a wide margin the tests required by the ECE22.06 homologation, making it even safer.

ECE22.06 Approved

An AGV icon, evolving towards perfection. K3 is AGV's full-face road helmet that takes all the characteristics of a versatile, safe helmet to outstanding levels.

It offers safety for all, at the highest levels - the shell made of high-resistance thermoplastic material, the multi-density EPS and the details such as the collarbone-protection profile and the protective visor allow K3 to obtain the strict ECE22.06 homologation. Due to the AGV Extreme Safety construction protocol, K3 meets the requirements of the most recent international standards and then some.

Its strength lies in its versatility. K3 is designed to put in its best performance in all situations. The built-in sun visor, which can be operated conveniently with gloves on, assists when it?s too bright, and doesn?t block the front ventilation when it's in the rest position. The Pinlock Max Vision antifog system guarantees maximum visibility even on the wettest and coldest days, when the temperature difference between the environment and the inside of the helmet could cause the visor to fog up dangerously. Not with K3. The Ultravision visor also guarantees a 190° horizontal field of vision, so you can see obstacles, the road and everything in front of you earlier and better.

K3 is prepared for the installation of communication systems. The Eyewear Ready interior design allows you to comfortably wear your eyeglasses or sunglasses while riding.

Comfort boosts performance. The aerodynamic profile of the K3 is designed to achieve a dynamic weight of zero at a cruising speed of 130 km/h. It means lower weight and less strain on the neck muscles, for maximum concentration on riding. The interiors, made of 2DRY material with rapid absorption of sweat and moisture, can be customized, to personalize the fit to the full and maximize how comfortable it feels. The ventilation achieves maximum efficiency through the air vents at the front and on the chin, precise and easy to operate with gloves on.

The practical micrometric steel closing system permits quick, safe adjustment of the helmet fastening.

The best helmet for any use, made from technologies developed for MotoGP™.

Finally, a comfortable, versatile, and safe road helmet for any use, any motorbike, and any rider thanks to the same advanced materials and innovative technology used to help world champions achieve the maximum in the most extreme conditions.

Everything you need is now combined with everything you've ever wanted.

ECE22.06 Approved

A protection that exceeds every expectation

K6 S provides the security riders need to fully express themselves in any situation, due to its world championship level protection. The premium carbon-aramid fiber shell and five EPS densities offer the same protection that professional MotoGP™ riders are guaranteed. Due to the stringent AGV Extreme Safety design protocol, K6 S passes all the tests required by the strict ECE22.06 standard by a large margin, making the helmet safer than the levels required by the latest road homologations.
All this plus lightness like none other.

Every detail is designed to protect

Every detail of K6 S is designed to guarantee the safety of its wearer. The visor mechanisms are incredibly small, to maximize EPS on the surface and maximize the area covered by ​​the shell. The profile of the helmet is designed to minimize the chances of impact with the collarbone.
An AGV invention, now a racing world standard.

Ultravision: see more, under any circumstance

Exclusive AGV Ultravision guarantees 190° horizontal field of vision which means seeing the road, the corners, and the obstacles better, and ahead of time. The Optical Class 1 visor features the 100% Max Vision Pinlock 120 anti-fog system and is up to 4.3 mm thick. The Micro-Lock system allows the visor to be opened for air flow while keeping the visor securely fastened to the chinguard. High level characteristics that are designed to instill the confidence needed to win a world championship and that are now available on a helmet for any use.

Put it on, you barely feel it

Just 1255 grams. The premium materials used for the shell and the innovative technological solutions reduce the weight of the K6 S to a minimum, making it one of the lightest road helmets in the world. The lightest of all in its category. This lightness makes riding comfortable and reduces fatigue so that you can tackle even the longest trips without getting distracted.

The only thing you'll feel on your head is total comfort.

The quality of the interior really makes the difference

The interior of the K6 S is made of select materials developed by AGV to meet the needs of MotoGP™ riders who take on the most extreme conditions on track. The external liner is made of wear-proof, waterproof fabric that keeps water out even during the heaviest rainfall. The interior liner is made of a breathable fabric that absorbs sweat in record time, leaving your face dry at all times.

Perfect ventilation no matter what road you take

Five large air vents are positioned where the greatest air flow is so that you can personalize ventilation and get the most under any conditions. The central air vent is located at the point of maximum air pressure to ventilate inside the upper part of the helmet. The ergonomic shape of the adjusters is optimized for use while wearing gloves. The visor comes with the AGV Micro-Lock system which offers another air entry point without affecting the protective capacity at all.

Cuts through the air without moving: aerodynamics you can feel

Aerodynamics do not just help with lap times. Due to the exclusive design of its shell and its rear spoiler, K6 S splits the air and remains very stable even at high speeds. This is an advantage in terms of performance and comfort, both for sports riding on hairpin turns and during long trips on highways.
The K6 S design guarantees minimum aerodynamic resistance, making the most of the lift to obtain zero Z-lift at cruising speed. It means that at a speed of 130 km/h the helmet has a dynamic weight of zero.

You'll feel the difference, in any situation.

Always the right position for maximum performance

The K6 S is designed for optimal performance no matter the riding position, whether comfortable for cruising and sport touring, strenuous for traffic-filled city streets, or sporty, tucked inside the fairing. Its aerodynamic performance is exceptional regardless of what you're used to in order to meet every rider's need in any situation.

So balanced, it is even lighter

As if holding the record for lightness in the category weren't enough, the K6 S is designed to be highly balanced and have a neutral dynamic weight. The optimal load distribution means the bulk of the helmet is not felt on the head. It's like having all the advantages of a helmet without the fatigue of wearing one.

The new AGV K6 S, The comfort you need, the performance you've always wanted.

The best helmet for any use, made from technologies developed for MotoGP™.

Finally, a comfortable, versatile, and safe road helmet for any use, any motorbike, and any rider thanks to the same advanced materials and innovative technology used to help world champions achieve the maximum in the most extreme conditions.

Everything you need is now combined with everything you've ever wanted.

ECE22.06 Approved

A protection that exceeds every expectation

K6 S provides the security riders need to fully express themselves in any situation, due to its world championship level protection. The premium carbon-aramid fiber shell and five EPS densities offer the same protection that professional MotoGP™ riders are guaranteed. Due to the stringent AGV Extreme Safety design protocol, K6 S passes all the tests required by the strict ECE22.06 standard by a large margin, making the helmet safer than the levels required by the latest road homologations.
All this plus lightness like none other.

Every detail is designed to protect

Every detail of K6 S is designed to guarantee the safety of its wearer. The visor mechanisms are incredibly small, to maximize EPS on the surface and maximize the area covered by ​​the shell. The profile of the helmet is designed to minimize the chances of impact with the collarbone.
An AGV invention, now a racing world standard.

Ultravision: see more, under any circumstance

Exclusive AGV Ultravision guarantees 190° horizontal field of vision which means seeing the road, the corners, and the obstacles better, and ahead of time. The Optical Class 1 visor features the 100% Max Vision Pinlock 120 anti-fog system and is up to 4.3 mm thick. The Micro-Lock system allows the visor to be opened for air flow while keeping the visor securely fastened to the chinguard. High level characteristics that are designed to instill the confidence needed to win a world championship and that are now available on a helmet for any use.

Put it on, you barely feel it

Just 1255 grams. The premium materials used for the shell and the innovative technological solutions reduce the weight of the K6 S to a minimum, making it one of the lightest road helmets in the world. The lightest of all in its category. This lightness makes riding comfortable and reduces fatigue so that you can tackle even the longest trips without getting distracted.

The only thing you'll feel on your head is total comfort.

The quality of the interior really makes the difference

The interior of the K6 S is made of select materials developed by AGV to meet the needs of MotoGP™ riders who take on the most extreme conditions on track. The external liner is made of wear-proof, waterproof fabric that keeps water out even during the heaviest rainfall. The interior liner is made of a breathable fabric that absorbs sweat in record time, leaving your face dry at all times.

Perfect ventilation no matter what road you take

Five large air vents are positioned where the greatest air flow is so that you can personalize ventilation and get the most under any conditions. The central air vent is located at the point of maximum air pressure to ventilate inside the upper part of the helmet. The ergonomic shape of the adjusters is optimized for use while wearing gloves. The visor comes with the AGV Micro-Lock system which offers another air entry point without affecting the protective capacity at all.

Cuts through the air without moving: aerodynamics you can feel

Aerodynamics do not just help with lap times. Due to the exclusive design of its shell and its rear spoiler, K6 S splits the air and remains very stable even at high speeds. This is an advantage in terms of performance and comfort, both for sports riding on hairpin turns and during long trips on highways.
The K6 S design guarantees minimum aerodynamic resistance, making the most of the lift to obtain zero Z-lift at cruising speed. It means that at a speed of 130 km/h the helmet has a dynamic weight of zero.

You'll feel the difference, in any situation.

Always the right position for maximum performance

The K6 S is designed for optimal performance no matter the riding position, whether comfortable for cruising and sport touring, strenuous for traffic-filled city streets, or sporty, tucked inside the fairing. Its aerodynamic performance is exceptional regardless of what you're used to in order to meet every rider's need in any situation.

So balanced, it is even lighter

As if holding the record for lightness in the category weren't enough, the K6 S is designed to be highly balanced and have a neutral dynamic weight. The optimal load distribution means the bulk of the helmet is not felt on the head. It's like having all the advantages of a helmet without the fatigue of wearing one.

The new AGV K6 S, The comfort you need, the performance you've always wanted.

The AGV Extreme Safety construction protocol means that the new K3 exceeds the requirements of the most recent international standards. K3 has in fact passed by a wide margin the tests required by the ECE22.06 homologation, making it even safer.

ECE22.06 Approved

An AGV icon, evolving towards perfection. K3 is AGV's full-face road helmet that takes all the characteristics of a versatile, safe helmet to outstanding levels.

It offers safety for all, at the highest levels - the shell made of high-resistance thermoplastic material, the multi-density EPS and the details such as the collarbone-protection profile and the protective visor allow K3 to obtain the strict ECE22.06 homologation. Due to the AGV Extreme Safety construction protocol, K3 meets the requirements of the most recent international standards and then some.

Its strength lies in its versatility. K3 is designed to put in its best performance in all situations. The built-in sun visor, which can be operated conveniently with gloves on, assists when it?s too bright, and doesn?t block the front ventilation when it's in the rest position. The Pinlock Max Vision antifog system guarantees maximum visibility even on the wettest and coldest days, when the temperature difference between the environment and the inside of the helmet could cause the visor to fog up dangerously. Not with K3. The Ultravision visor also guarantees a 190° horizontal field of vision, so you can see obstacles, the road and everything in front of you earlier and better.

K3 is prepared for the installation of communication systems. The Eyewear Ready interior design allows you to comfortably wear your eyeglasses or sunglasses while riding.

Comfort boosts performance. The aerodynamic profile of the K3 is designed to achieve a dynamic weight of zero at a cruising speed of 130 km/h. It means lower weight and less strain on the neck muscles, for maximum concentration on riding. The interiors, made of 2DRY material with rapid absorption of sweat and moisture, can be customized, to personalize the fit to the full and maximize how comfortable it feels. The ventilation achieves maximum efficiency through the air vents at the front and on the chin, precise and easy to operate with gloves on.

The practical micrometric steel closing system permits quick, safe adjustment of the helmet fastening.

The best helmet for any use, made from technologies developed for MotoGP™.

Finally, a comfortable, versatile, and safe road helmet for any use, any motorbike, and any rider thanks to the same advanced materials and innovative technology used to help world champions achieve the maximum in the most extreme conditions.

Everything you need is now combined with everything you've ever wanted.

ECE22.06 Approved

A protection that exceeds every expectation

K6 S provides the security riders need to fully express themselves in any situation, due to its world championship level protection. The premium carbon-aramid fiber shell and five EPS densities offer the same protection that professional MotoGP™ riders are guaranteed. Due to the stringent AGV Extreme Safety design protocol, K6 S passes all the tests required by the strict ECE22.06 standard by a large margin, making the helmet safer than the levels required by the latest road homologations.
All this plus lightness like none other.

Every detail is designed to protect

Every detail of K6 S is designed to guarantee the safety of its wearer. The visor mechanisms are incredibly small, to maximize EPS on the surface and maximize the area covered by ​​the shell. The profile of the helmet is designed to minimize the chances of impact with the collarbone.
An AGV invention, now a racing world standard.

Ultravision: see more, under any circumstance

Exclusive AGV Ultravision guarantees 190° horizontal field of vision which means seeing the road, the corners, and the obstacles better, and ahead of time. The Optical Class 1 visor features the 100% Max Vision Pinlock 120 anti-fog system and is up to 4.3 mm thick. The Micro-Lock system allows the visor to be opened for air flow while keeping the visor securely fastened to the chinguard. High level characteristics that are designed to instill the confidence needed to win a world championship and that are now available on a helmet for any use.

Put it on, you barely feel it

Just 1255 grams. The premium materials used for the shell and the innovative technological solutions reduce the weight of the K6 S to a minimum, making it one of the lightest road helmets in the world. The lightest of all in its category. This lightness makes riding comfortable and reduces fatigue so that you can tackle even the longest trips without getting distracted.

The only thing you'll feel on your head is total comfort.

The quality of the interior really makes the difference

The interior of the K6 S is made of select materials developed by AGV to meet the needs of MotoGP™ riders who take on the most extreme conditions on track. The external liner is made of wear-proof, waterproof fabric that keeps water out even during the heaviest rainfall. The interior liner is made of a breathable fabric that absorbs sweat in record time, leaving your face dry at all times.

Perfect ventilation no matter what road you take

Five large air vents are positioned where the greatest air flow is so that you can personalize ventilation and get the most under any conditions. The central air vent is located at the point of maximum air pressure to ventilate inside the upper part of the helmet. The ergonomic shape of the adjusters is optimized for use while wearing gloves. The visor comes with the AGV Micro-Lock system which offers another air entry point without affecting the protective capacity at all.

Cuts through the air without moving: aerodynamics you can feel

Aerodynamics do not just help with lap times. Due to the exclusive design of its shell and its rear spoiler, K6 S splits the air and remains very stable even at high speeds. This is an advantage in terms of performance and comfort, both for sports riding on hairpin turns and during long trips on highways.
The K6 S design guarantees minimum aerodynamic resistance, making the most of the lift to obtain zero Z-lift at cruising speed. It means that at a speed of 130 km/h the helmet has a dynamic weight of zero.

You'll feel the difference, in any situation.

Always the right position for maximum performance

The K6 S is designed for optimal performance no matter the riding position, whether comfortable for cruising and sport touring, strenuous for traffic-filled city streets, or sporty, tucked inside the fairing. Its aerodynamic performance is exceptional regardless of what you're used to in order to meet every rider's need in any situation.

So balanced, it is even lighter

As if holding the record for lightness in the category weren't enough, the K6 S is designed to be highly balanced and have a neutral dynamic weight. The optimal load distribution means the bulk of the helmet is not felt on the head. It's like having all the advantages of a helmet without the fatigue of wearing one.

The new AGV K6 S, The comfort you need, the performance you've always wanted.

The AGV Pista GP RR Helmet is an exact replica of helmets worn by world championship racers. It meets stringent FIM Racing Homologation standards and provides the highest level of protection, even against glancing impacts that can cause rotational motion. Carbon fiber molded into an innovative shape lets the helmet move through air effortlessly. AGV's Integrated Ventilation System (IVS) uses 5 large front metal air vents and 2 rear extractors to let air pass through the helmet freely. Four shell sizes used across 7 different helmet sizes get a closer fitting shell compared to other helmets. The helmet was designed for an aggressive tucked racing position with a face shield allowing for a maximum vertical view and wide horizontal view. AGV's patented Visor Lock System (VLS) decreases the chance that the face shield comes opens in a crash. With a fit developed for MotoGP racers, the Pista GP RR's lining allows for an optimized fit and positioning on your head. Everything about the AGV Pista GP RR Helmet is designed for high speed track performance. 

Features:

• 100% Carbon Fiber Shell
• 4 Shell Sizes
• 5 Density EPS structure in 4 sizes
• Shell and EPS designed to minimize rotational accelerations per FIM regulations
• IVS (Integrated Ventilation System) ventilation with 5 large front metal air vents and 2 rear extractors hollowed in the shell
• Vents covers included
• Fully removable MotoGP developed integrated hydration system with internal channels engineered for smooth tube placement and drinking valve placed inside the chin of the helmet for a constant and smooth hydration during riding
• Class Optic 1 visor with 100% Max Vision Pinlock (120) anti-fog technology is designed for maximum vertical view on racing position (85°) and unmatched horizontal view (190°) 
• Anti-scratch, tear-off ready Race 3 face shield (tear-off kit included)
• Visor thickness is from 4 to 5 mm, increasing face and eye protection
• Internal chin channels distribute the airflow evenly through the entire visor surface
• Patented Visor Lock System (VLS) reduces the risk of the face shield accidentally opening in case of a crash
• Exclusive metal visor mechanism in metal with roto-translation movement achieves total sealing between visor and shell
• Tool-free rapid visor release system allows the visor to be removed and replaced in seconds
• MotoGP-developed removable, washable interior padding
• Neck Roll made with 2-way stretch breathable fabric with Nabuk inserts
• Cheek pads made with soft Shalimar fabric with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented cheek pads safety release system, engineered to remove conveniently cheek pads in case of accident.
• Crown liner made with elastic microfiber with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented crown structure allows riders to optimize fit and select helmet height positioning on the top of the head
• Removable nose guard and wind protector
• Titanium Double D retention system
• ECE 22.05

Gringo takes its '60s motorsport aesthetic and elevates it to modern ECE R22.05 motorcycle standards—the European test protocol recognized by leading helmet makers and independent safety labs as the toughest in the world.

Features:

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad dissipates energy during frontal impacts
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Molded recesses inside EPS designed to accept various aftermarket audio and communication components
• ECE R22.05 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

The AGV Extreme Safety construction protocol means that the new K1 S exceeds the requirements of the most recent international standards, making it even safer. The shell is made of high-resistance thermoplastic material for minimal encumbrance while the inner shell is in multidensity EPS. The safe profile is designed to prevent injury to the collarbone.

ECE22.06 Approved

K1 S is the road helmet that comes out of AGV's experience in MotoGP™, suitable for a range of uses on any route.

The aerodynamic shape of its shell made of high-resistance thermoplastic material, the front air vents developed through racing experience and the new Aero Spoiler designed in the wind tunnel maximize performance and provide stability even at high speeds in sports riding.

The Ultravision scratch-resistant panoramic visor offers a wider lateral and vertical view, for total control of the surrounding environment. Uncompromising comfort, due to the soft, removable and washable Dry-Comfort interior.

The AGV Extreme Safety construction protocol means that K1 S meets the requirements of the stringent ECE22.06 standard and then some.

AGV K1 S is prepared for the installation of communication systems.

The AGV Extreme Safety construction protocol means that the new K1 S exceeds the requirements of the most recent international standards, making it even safer. The shell is made of high-resistance thermoplastic material for minimal encumbrance while the inner shell is in multidensity EPS. The safe profile is designed to prevent injury to the collarbone.

ECE22.06 Approved

K1 S is the road helmet that comes out of AGV's experience in MotoGP™, suitable for a range of uses on any route.

The aerodynamic shape of its shell made of high-resistance thermoplastic material, the front air vents developed through racing experience and the new Aero Spoiler designed in the wind tunnel maximize performance and provide stability even at high speeds in sports riding.

The Ultravision scratch-resistant panoramic visor offers a wider lateral and vertical view, for total control of the surrounding environment. Uncompromising comfort, due to the soft, removable and washable Dry-Comfort interior.

The AGV Extreme Safety construction protocol means that K1 S meets the requirements of the stringent ECE22.06 standard and then some.

AGV K1 S is prepared for the installation of communication systems.

The AGV Extreme Safety construction protocol means that the new K1 S exceeds the requirements of the most recent international standards, making it even safer. The shell is made of high-resistance thermoplastic material for minimal encumbrance while the inner shell is in multidensity EPS. The safe profile is designed to prevent injury to the collarbone.

ECE22.06 Approved

K1 S is the road helmet that comes out of AGV's experience in MotoGP™, suitable for a range of uses on any route.

The aerodynamic shape of its shell made of high-resistance thermoplastic material, the front air vents developed through racing experience and the new Aero Spoiler designed in the wind tunnel maximize performance and provide stability even at high speeds in sports riding.

The Ultravision scratch-resistant panoramic visor offers a wider lateral and vertical view, for total control of the surrounding environment. Uncompromising comfort, due to the soft, removable and washable Dry-Comfort interior.

The AGV Extreme Safety construction protocol means that K1 S meets the requirements of the stringent ECE22.06 standard and then some.

AGV K1 S is prepared for the installation of communication systems.