Road

We designed our smallest EXFIL® bag to fit on motorcycles with tall risers or T-bars, but its MOLLE mounting system lets you attach this bag practically anywhere using the six Velcro straps included with each unit.

Features:

• UV-treated, PVC-coated 500 denier tarpaulin exterior is water resistant and tough
• Semi-sealed nylon zippers on exterior for added rain resistance
• MOLLE loop system on front panel for mounting and expansion
• Hi-vis orange nylon interior makes finding contents easier
• Thermal-welded seams for added weather-proofing
• Internal organizing panels are removable to customize the bag's function and volume
• Six Velcro mounting straps included
• Dimensions: 17cm wide x 25cm tall x 9cm deep

Install Tips:

Our EXFIL-3 is the glove box and center console few motorcycles have, but the one every bike needs. Highly weather- and water-resistant to protect your gear from exposure, but not 100% watertight. Lots of MOLLE attachment points for carabiners, Velcro straps and expansion with similar equipment. Heavily padded interior features two removable panels, both with storage pockets and pouches to keep keys, documents and other essentials tight and tidy.

This is the bag that started our EXFIL® motorcycle luggage revolution. In military parlance "EXFIL®" means to leave in a rapid, organized fashion—the way every smart bikerider likes to ride. The number means this EXFIL® bag holds seven 350ml beer cans, and is a naming convention that carries throughout our moto luggage line.

Features:

• MOLLE system on exterior lets you attach and expand this bag with other bags and accessories
• Rugged, rust-free nylon zippers throughout
• Duraflex quick-release buckles with adjustable nylon straps for speedy installation
• UV-treated, 1680 denier polyester nylon construction
• PVC coated synthetic mounting straps with nickel-plated stainless buckles
• External chassis panels are PVC backed for added water resistance
• Interior volume holds seven 350ml / 12oz cans
• Hi-vis orange nylon interior makes spotting contents easier
• One main and three secondary pockets offer plenty of room for gear, maps, and other essentials

Install Tips:

Like all our luggage designs, you can mount EXFIL-7 anywhere. On our personal bikes we've mounted over-stuffed EXFIL-7's on the down tube, over the headlight on tall risers, and on both sides of the sissy bar. A pair of EXFIL-7's will hang perfectly on H-D fender struts to create a set of mini saddle bags. EXFIL-7's MOLLE system and reinforced PVC straps make all these options possible. Once mounted, EXFIL-7 gobbles up personal gear like wallets, pocket knives, phones, tools and other stuff to become the glove box most motorcycles need but don't have.

Our laser-cut plastic flex shield covers the eye port on ECE-certified Gringo helmets to protect you from the elements.

Features:

• Polycarbonate plastic material resists impacts from flying road debris
• Five nickel-plates stainless-steel snaps attach the shield over Gringo eye port
• Fits XS-XXL ECE-certified Gringo helmets
• Clear, Smoke and Chrome tints available
• Provides 91% UV/A and 99% UV/B light resistance based on AATCC-138 test standard
• This shield is not anti-fog coated, but you can apply your own aftermarket anti-fog spray of choice

Care & Maintenance:

Easy to install in a snap by fastening it to the five snaps around the eye port on your Gringo helmet. Removes quickly for storage or cleaning. Use mild soapy water and a microfiber cloth only for cleaning. DO NOT put harsh household or petroleum-based chemicals on the shield as damage will occur. Apply a drop of standard light household oil inside each snap before installation to make reduce oxidation and make removal easier.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

Refer to diagram for dimensions.

Renegade is identical to our Thruster model—tall flange, thick end cap—but features the football-shaped file pattern grip section as our Recoil grip. A great grip for big hands.

Features:

• Comes as a pair
• Injection-molded Thermoplastic Vulcanizate synthetic rubber is soft, durable and highly UV-resistant
• Thick one-piece molded end design for durability
• Tall inner flange protects your hands from discomfort against throttle and hand controls
• Safety wire grooves on grip ends for added security
• Aftermarket throttle tube required to install Biltwell grips on stock H-D hand controls—see our Whiskey Throttle

Install Tips:

Counterintuitive though it might seem, aerosol WD-40 spray lubricant is our chemical of choice for installing Biltwell molded TPV grips. "But it's oil!" you say. Yes, but WD-40's combination of aerosol propellant and organic-based lubricant is perfect for sliding tight grips onto clean metal tubes. A quick 1 or 2-second blast into the open end of the grip is all it takes. Once installed, WD-40's chemical compound melts the grip interior just enough to make it stick to the bar like glue, without the mess. IMPORTANT: Wait 24 hours after installation before riding to give grips time to set up on the bars. Immediately after installation you can add safety wire wraps to both ends of the grips; this old motocross trick works great to reduce grip slip on the bars and throttle tube.

Refer to diagram for dimensions.

Our Kung Fu grip's squishy surface design is cozy the second you grab it. New UV-resistant TPV synthetic rubber is soft, yet durable for miles of comfort.

Features:

• Comes as a pair
• Injection-molded Thermoplastic Vulcanizate synthetic rubber is soft, durable and highly UV-resistant
• Medium inside flange cushions rider's hands from rubbing the throttle and controls
• Thick outer flange for durability
• Safety wire grooves for added security
• Aftermarket throttle tube required to install Biltwell grips on stock H-D hand controls—see our Whiskey Throttle

Install Tips:

Counterintuitive though it might seem, aerosol WD-40 spray lubricant is our chemical of choice for installing Biltwell molded TPV grips. "But it's oil!" you say. Yes, but WD-40's combination of aerosol propellant and organic-based lubricant is perfect for sliding tight grips onto clean metal tubes. A quick 1 or 2-second blast into the open end of the grip is all it takes. Once installed, WD-40's chemical compound melts the grip interior just enough to make it stick to the bar like glue, without the mess. IMPORTANT: Wait 24 hours after installation before riding to give grips time to set up on the bars. Immediately after installation you can add safety wire wraps to both ends of the grips; this old motocross trick works great to reduce grip slip on the bars and throttle tube.

Refer to diagram for dimensions.

Diamond pillow surfacing is comfortable, but wears like the sole on a boot. No inside flange makes our Torker grip a great choice for aftermarket throttles—clean and lean.

Features:

• Comes as a pair
• Injection-molded Thermoplastic Vulcanizate synthetic rubber is soft, durable and highly UV-resistant
• Flangeless design looks great on café racers, vintage Japanese and British customs and modern cruisers
• Thick one-piece molded end design for durability
• Safety wire grooves for added security
• Aftermarket throttle tube required to install Biltwell grips on stock H-D hand controls—see our Whiskey Throttle

Install Tips:

Counterintuitive though it might seem, aerosol WD-40 spray lubricant is our chemical of choice for installing Biltwell molded TPV grips. "But it's oil!" you say. Yes, but WD-40's combination of aerosol propellant and organic-based lubricant is perfect for sliding tight grips onto clean metal tubes. A quick 1 or 2-second blast into the open end of the grip is all it takes. Once installed, WD-40's chemical compound melts the grip interior just enough to make it stick to the bar like glue, without the mess. IMPORTANT: Wait 24 hours after installation before riding to give grips time to set up on the bars. Immediately after installation you can add safety wire wraps to both ends of the grips; this old motocross trick works great to reduce grip slip on the bars and throttle tube.

Refer to diagram for dimensions.

Diamond pillow surfacing is comfortable, but wears like the sole on a boot. No inside flange makes our Torker grip a great choice for aftermarket throttles—clean and lean.

Features:

• Comes as a pair
• Injection-molded Thermoplastic Vulcanizate synthetic rubber is soft, durable and highly UV-resistant
• Flangeless design looks great on café racers, vintage Japanese and British customs and modern cruisers
• Thick one-piece molded end design for durability
• Safety wire grooves for added security
• Aftermarket throttle tube required to install Biltwell grips on stock H-D hand controls—see our Whiskey Throttle

Install Tips:

Counterintuitive though it might seem, aerosol WD-40 spray lubricant is our chemical of choice for installing Biltwell molded TPV grips. "But it's oil!" you say. Yes, but WD-40's combination of aerosol propellant and organic-based lubricant is perfect for sliding tight grips onto clean metal tubes. A quick 1 or 2-second blast into the open end of the grip is all it takes. Once installed, WD-40's chemical compound melts the grip interior just enough to make it stick to the bar like glue, without the mess. IMPORTANT: Wait 24 hours after installation before riding to give grips time to set up on the bars. Immediately after installation you can add safety wire wraps to both ends of the grips; this old motocross trick works great to reduce grip slip on the bars and throttle tube.

Patches are the unofficial freak flags of bikeriders worldwide, with members of the brotherhood (sisters, too) rocking them on riding gear for generations.

Our range of irreverent lifestyle accessories includes quality multi-colored patches, each one packed with enough silliness or seriousness to show folks where you stand.

This shield patch is 3 inches wide (7.6CM).

Refer to diagram for dimensions.

Our Kung Fu grip's squishy surface design is cozy the second you grab it. New UV-resistant TPV synthetic rubber is soft, yet durable for miles of comfort.

Features:

• Comes as a pair
• Injection-molded Thermoplastic Vulcanizate synthetic rubber is soft, durable and highly UV-resistant
• Medium inside flange cushions rider's hands from rubbing the throttle and controls
• Thick outer flange for durability
• Safety wire grooves for added security
• Aftermarket throttle tube required to install Biltwell grips on stock H-D hand controls—see our Whiskey Throttle

Install Tips:

Counterintuitive though it might seem, aerosol WD-40 spray lubricant is our chemical of choice for installing Biltwell molded TPV grips. "But it's oil!" you say. Yes, but WD-40's combination of aerosol propellant and organic-based lubricant is perfect for sliding tight grips onto clean metal tubes. A quick 1 or 2-second blast into the open end of the grip is all it takes. Once installed, WD-40's chemical compound melts the grip interior just enough to make it stick to the bar like glue, without the mess. IMPORTANT: Wait 24 hours after installation before riding to give grips time to set up on the bars. Immediately after installation you can add safety wire wraps to both ends of the grips; this old motocross trick works great to reduce grip slip on the bars and throttle tube.

Refer to diagram for dimensions.

Our Kung Fu grip's squishy surface design is cozy the second you grab it. New UV-resistant TPV synthetic rubber is soft, yet durable for miles of comfort.

Features:

• Comes as a pair
• Injection-molded Thermoplastic Vulcanizate synthetic rubber is soft, durable and highly UV-resistant
• Medium inside flange cushions rider's hands from rubbing the throttle and controls
• Thick outer flange for durability
• Safety wire grooves for added security
• Aftermarket throttle tube required to install Biltwell grips on stock H-D hand controls—see our Whiskey Throttle

Install Tips:

Counterintuitive though it might seem, aerosol WD-40 spray lubricant is our chemical of choice for installing Biltwell molded TPV grips. "But it's oil!" you say. Yes, but WD-40's combination of aerosol propellant and organic-based lubricant is perfect for sliding tight grips onto clean metal tubes. A quick 1 or 2-second blast into the open end of the grip is all it takes. Once installed, WD-40's chemical compound melts the grip interior just enough to make it stick to the bar like glue, without the mess. IMPORTANT: Wait 24 hours after installation before riding to give grips time to set up on the bars. Immediately after installation you can add safety wire wraps to both ends of the grips; this old motocross trick works great to reduce grip slip on the bars and throttle tube.

Refer to diagram for dimensions.

Murdock risers for Harley big twins are available in straight and pullback models and a broad range of rises. Investment-cast clamps, TIG-welded chromoly uprights and CNC lathe-turned mounting bases create a handlebar riser with unrivaled stiffness and strength for aggressive, technical and high-speed riding.

Features:

• Available styles: straight and pullback
• Available rise heights: 8", 10" and 12"
• Available finishes: Black electroplate and mirror chrome-plated
• Investment-cast one-piece steel bar clamp accepts 1-inch O.D. handlebars
• 0.120-inch (3mm) wall x 1" O.D. 4130 chromoly uprights
• CNC lathe-turned mounting bases accept 1/2-13 t.p.i. stock and aftermarket mounting hardware
• Mounting holes on 3.5-inch centers to fit most stock and select aftermarket H-D fork trees
• TIG welded and hand polished before polishing
• Pullback Murdock risers feature mandrel-bent uprights for two inches of rearward bar offset—perfect for reducing reach for shorter riders
• Stainless-steel 5/16-18 t.p.i. bar clamp hardware
• Technischer Überwachungsverein (Technical Inspection Association, or TüV) in Germany is an independent laboratory that tests the fatigue strength, manufacturing quality, and fitment for a wide range of consumer products, with special emphasis on automotive and motorcycle components and accessories. Biltwell handlebars and risers that have received TüV verification are among the strongest and most thoroughly well-tested motorcycle parts in the world.

Form & Function:

When we introduced our Murdock risers to the custom H-D scene, "club-style" Harleys were just gaining traction among high-performance riders on both coasts of the US. Our precision-crafted chromoly steel riser became a top choice among high-speed Dyna and Sportster riders. The 12 o'clock wheelie and tire-smoking crowd appreciated Murdock's stiffness and reliability compared to cast or CNC'ed aluminum risers instantly. Combined with any handlebar from our Tracker line, Murdock risers create a cockpit you can depend on for life in the fast lane. 

1" O.D, TBW Version w/ insert - work with regular, cable-operated throttles, and if you remove the black end plug it will accept Harley's Throttle-By-Wire control module. These bars have slots on each side for stock H-D hand controls and an exit slot in the center for internal wiring. We also have Smooth options available for custom applications.

Refer to diagram for dimensions.

The top-selling handlebar in our range, and for good reason. Our Tracker bars come in two O.D.'s and three heights, and look great in any stock or aftermarket riser you can imagine. These handlebars are constructed with seamless CNC mandrel bent 0.120” wall 4130 chromoly tubes. Available in two styles: Smooth bars are for custom applications and have no slots, dimples or castellated ends. TBW w/ insert handlebars work with regular, cable-operated throttles, and if you remove the black end plug it will accept Harley's Throttle-By-Wire control module. These bars have slots on each side for stock H-D hand controls and an exit slot in the center for internal wiring.

Features:

• Seamless 0.120" (3mm) wall 4130 chromoly construction
• Precision mandrel-bent tubing for comfortable, precise ergonomics
• Black electroplate finish
• TBW w/ insert option has a 1in O.D. with a 20.9mm I.D.
• 1" O.D. model available in smooth for custom application or TBW w/ insert for regular, cable-operated throttles, and if you remove the black end plug it will accept Harley's Throttle-By-Wire control module
• Technischer Überwachungsverein (Technical Inspection Association, or TüV) in Germany is an independent laboratory that tests the fatigue strength, manufacturing quality, and fitment for a wide range of consumer products, with special emphasis on automotive and motorcycle components and accessories. Biltwell handlebars and risers that have received TüV verification are among the strongest and most thoroughly well-tested motorcycle parts in the world.

Form & Function:

With a backsweep less severe than most stock handlebars, any Tracker in our range is a great replacement for riders who want to ditch the wheelbarrow feel of OE bars. When people ask for our advice on which Tracker to mate with any given Murdock riser, we recommend building a combo that puts your hands slightly below or even with the height of your shoulders when you're sitting comfortably on your motorcycle. Hands higher than shoulder height is popular, but it's a position better suited for experienced riders. If the cables and control wires on your bike prohibit going too tall or wide with your bars, combine our low or mid Tracker with some Slimline or Thunder risers for a clean, race-inspired, comfortable cockpit.

In 50 years one of these made in USA stamped aluminum Biltwell shop signs might sell for 5,000 bucks on season 75 of "American Pickers".

Until that day comes, you can buy one for less than the price of two large Costco pizzas.

Stamped construction with screenprinted graphics.  

Script Shop Sign Dimensions: 23.5" x 10" (596.9mm x 254mm)

Our ECE-certified Gringo S boasts fit, finish and safety technology identical to its full-face sibling, but features a CE-certified flip-up face shield for added safety and riding comfort.

Features:

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad dissipates energy from frontal impacts
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• CE-certified polycarbonate shield includes anti-fog and anti-scratch treatments for safety and durability
• Rugged shield hinge hardware with robust detents allows you to open the shield at slow speeds for increased airflow 
• Molded recesses inside EPS designed to accept various aftermarket audio and communication components

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

Gringo takes its '60s motorsport aesthetic and elevates it to modern ECE R22.05 motorcycle standards—the European test protocol recognized by leading helmet makers and independent safety labs as the toughest in the world.

Features:

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad dissipates energy during frontal impacts
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Molded recesses inside EPS designed to accept various aftermarket audio and communication components
• ECE R22.05 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

Replacement shields for Gringo S helmets are injection molded with highly scratch- and impact-resistant polycarbonate thermoplastic. Our latest Gen-2 shields fit all Gringo S models because they ship with an all-new baseplate kit. These baseplates have an improved mechanism that results in firmer detents for three open positions. Anti-fog treatment included for maximum optical clarity.

Features:

• Injection-molded scratch-and impact-resistant polycarbonate thermoplastic construction
• Nickel-plated stainless-steel snap on shield fastens securely to snap on helmet shell
• Colored shields feature in-mold tint technology
• Mirrored shields feature reflective coating in a variety of surface finishes to reduce glare
• Every shield color and style provides 91% UV/A and 99% UV/B light resistance based on AATCC-138 test standard
• Anti-fog treatment on shield interior fights moisture build-up from breathing and humidity 

Care & Maintenance:

To clean your visor, use mild soapy water solution and a microfiber cloth to loosen bugs and road debris, then dry it with a second clean microfiber towel. Never use harsh household or petroleum-based chemicals to clean your shield, especially on the inside, as they can destroy the shield's special coatings. If the retainer snap on your Gringo S shield becomes tight or sticky, apply one drop of general-purpose light household oil to the inside. Apply one drop of medium-strength blue Loc-Tite to the threads of both hinge screws every time you install a visor.

Our modern take on the track-tested MX classic features a short bill to keep the sun out of your eyes and tapered sides for a look that would make Steve McQueen proud.

Features:

• Injection-molded polycarbonate thermoplastic construction
• Vivid in-mold colours
• Three heavy-duty, nickel-plated stainless-steel snaps
• Fits all Biltwell and many other helmets with three snaps on the brow

Care & Maintenance:

Start with the centre snap first, then work your way to the outside. Use mild soapy water and a microfiber cloth to clean your Moto Visor. DO NOT expose the visor to harsh household or petroleum-based chemicals—doing so can damage the surface finish and/or compromise material strength.

Aesthetically vintage and optically precise, our highly scratch-and impact-resistant polycarbonate bubble visors fit helmets with three snaps across the brow, and come in a number of colours and reflective coatings.

Features:

• Injection-molded scratch- and impact-resistant polycarbonate thermoplastic construction
• Plated stainless-steel snaps fasten securely to snaps on helmet brow for easy installation
• Coloured shields feature in-molded tint technology
• Mirrored shields feature reflective technology in a variety of surface finishes to reduce glare
• Every shield color and style provides 91% UV/A and 99% UV/B light resistance based on AATCC-138 test standard
• Anti-fog treatment on shield interior fights moisture build-up from breathing and humidity

Care & Maintenance:

Bubble shields from the plastic industry's glory days in the '60s were an instant hit with the hip chopper crowd, and have remained a popular safe-riding essential in modern times, thanks to advancements in polycarbonate technology and mold-making. Biltwell bubble visor are a snap to install, if you start with the center snap and move outward. To clean your visor, use mild soapy water solution and a microfiber cloth to loosen bugs and road debris, then dry it with a second clean microfiber towel. Never use harsh household or petroleum-based chemicals to clean your bubble shield, especially on the inside, as they can destroy the shield's special coatings.

Replacement shields for Gringo S helmets are injection molded with highly scratch- and impact-resistant polycarbonate thermoplastic. Our latest Gen-2 shields fit all Gringo S models because they ship with an all-new baseplate kit. These baseplates have an improved mechanism that results in firmer detents for three open positions. Anti-fog treatment included for maximum optical clarity.

Features:

• Injection-molded scratch-and impact-resistant polycarbonate thermoplastic construction
• Nickel-plated stainless-steel snap on shield fastens securely to snap on helmet shell
• Colored shields feature in-mold tint technology
• Mirrored shields feature reflective coating in a variety of surface finishes to reduce glare
• Every shield color and style provides 91% UV/A and 99% UV/B light resistance based on AATCC-138 test standard
• Anti-fog treatment on shield interior fights moisture build-up from breathing and humidity 

Care & Maintenance:

To clean your visor, use mild soapy water solution and a microfiber cloth to loosen bugs and road debris, then dry it with a second clean microfiber towel. Never use harsh household or petroleum-based chemicals to clean your shield, especially on the inside, as they can destroy the shield's special coatings. If the retainer snap on your Gringo S shield becomes tight or sticky, apply one drop of general-purpose light household oil to the inside. Apply one drop of medium-strength blue Loc-Tite to the threads of both hinge screws every time you install a visor.

Replacement shields for Lane Splitter helmets are injection molded with highly scratch- and impact-resistant polycarbonate thermoplastic. Our latest Gen-2 shields fit all Lane Splitter models because they ship with an all-new baseplate kit. These baseplates have an improved mechanism that results in firmer detents for three open positions. Anti-fog treatment included for maximum optical clarity.

Features:

• Injection-molded scratch- and impact-resistant polycarbonate thermoplastic construction
• Colored shields feature in-mold tint technology
• Mirrored shields feature reflective coating in a variety of surface finishes to reduce glare
• Every shield color and style provides 91% UV/A and 99% UV/B light resistance based on AATCC-138 test standard
• Anti-fog treatment on shield interior fights moisture build-up from breathing and humidity

Care & Maintenance:

To clean your shield, use mild soapy water solution and a microfiber cloth to loosen bugs and road debris, then dry it with a second clean microfiber towel. Never use harsh household or petroleum-based chemicals to clean your shield, especially on the inside, as they can destroy the shield's special coatings. Apply one drop of medium-strength blue Loc-Tite to the threads of both hinge screws every time you install a shield.

Progressively styled and rigorously tested, our ECE-certified helmet is a top choice for riders who demand comfort and high performance. Features include a rugged ABS outer shell, ventilated EPS safety liner, replaceable comfort liner and a clear anti-fog shield.

Features:

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad features front and side vents for airflow
• CE-certified polycarbonate shield includes anti-fog and anti-scratch treatments for safety and durability
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Molded recesses inside EPS interior shell accept select aftermarket audio and communication components
• Rugged shield hinge hardware with robust detents allows you to open the shield at slow speeds for increased airflow

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

Refer to diagram for dimensions.

Renegade is identical to our Thruster model—tall flange, thick end cap—but features the football-shaped file pattern grip section as our Recoil grip. A great grip for big hands.

Features:

• Comes as a pair
• Injection-molded Thermoplastic Vulcanizate synthetic rubber is soft, durable and highly UV-resistant
• Thick one-piece molded end design for durability
• Tall inner flange protects your hands from discomfort against throttle and hand controls
• Safety wire grooves on grip ends for added security
• Aftermarket throttle tube required to install Biltwell grips on stock H-D hand controls—see our Whiskey Throttle

Install Tips:

Counterintuitive though it might seem, aerosol WD-40 spray lubricant is our chemical of choice for installing Biltwell molded TPV grips. "But it's oil!" you say. Yes, but WD-40's combination of aerosol propellant and organic-based lubricant is perfect for sliding tight grips onto clean metal tubes. A quick 1 or 2-second blast into the open end of the grip is all it takes. Once installed, WD-40's chemical compound melts the grip interior just enough to make it stick to the bar like glue, without the mess. IMPORTANT: Wait 24 hours after installation before riding to give grips time to set up on the bars. Immediately after installation you can add safety wire wraps to both ends of the grips; this old motocross trick works great to reduce grip slip on the bars and throttle tube.

Like other leather/textile hybrids on the sport bike grid, our Bridgeport gloves feature rugged construction and a racy silhouette. Padding and reinforcement in key impact and friction zones means our most advanced three-season riding glove is ready for business when action heats up.

Features:

• Supple goatskin leather palm, fingertips, thumb, and friction zones
• Flexible thermoplastic rubber wrist tab with molded impact protection
• Anatomically shaped synthetic suede palm panel with Lycra flex zone
• Comfortable two-way stretch laminated neoprene wrist panel
• Ballistic nylon finger, hand, and knuckle guard panels
• Conductive stitching in fingers and thumb lets you operate smart screens
• Lycra expansion panels in finger joints for added dexterity
• Padded high-impact plastic knuckle guard with three-ply vented panel
• Silicone traction logo on palm
• Molded plastic finger vents
• Fully CE certified

Form & Function:

Building a premium glove is easier said than done. How do we know? Look at our competition. Most of the gloves in Bridgeport’s performance category look like props in a low-budget sci-fi movie. Bridgeport eschews over-the-top aesthetics to deliver comfortable, feature-packed protection for people who take riding seriously.

Like other leather/textile hybrids on the sport bike grid, our Bridgeport gloves feature rugged construction and a racy silhouette. Padding and reinforcement in key impact and friction zones means our most advanced three-season riding glove is ready for business when action heats up.

Features:

• Supple goatskin leather palm, fingertips, thumb, and friction zones
• Flexible thermoplastic rubber wrist tab with molded impact protection
• Anatomically shaped synthetic suede palm panel with Lycra flex zone
• Comfortable two-way stretch laminated neoprene wrist panel
• Ballistic nylon finger, hand, and knuckle guard panels
• Conductive stitching in fingers and thumb lets you operate smart screens
• Lycra expansion panels in finger joints for added dexterity
• Padded high-impact plastic knuckle guard with three-ply vented panel
• Silicone traction logo on palm
• Molded plastic finger vents
• Fully CE certified

Form & Function:

Building a premium glove is easier said than done. How do we know? Look at our competition. Most of the gloves in Bridgeport’s performance category look like props in a low-budget sci-fi movie. Bridgeport eschews over-the-top aesthetics to deliver comfortable, feature-packed protection for people who take riding seriously.