Road Helmets

The most affordable helmet on the market, with the highest safety homologation. The MT Thunder 4 SV represents all the drive and technological evolution of MT Helmets.

The arrival of the new ECE 22.06 certification has made MT Helmets a specialist in safety homologations and sends a very clear message to the industry: now safety on a bike is within everyone’s reach.

Features:

• HIRP Shell (High Impact Resistant Polymer) for excellent impact response. 2 Shell Sizes
• Three-Point Protector System – The base of this helmet has a three-point support system that has been developed to provide good stability when the Thunder 4 SV is placed on flat surfaces. This makes it easier to handle the helmet for cleaning or maintenance, but also allows the elements inside the helmet to be insulated from the surface, protecting them from chafing and, above all, enhancing hygiene when using the helmet
• Airflow Channel System – Through fluid dynamics analysis, air channels have been designed to minimize air resistance and boost internal ventilation flow, reducing temperature and moisture inside the helmet
• Reduced Aero Drag Design – An aerodynamic design studied by the MT Helmets engineering team to reduce aerodynamic resistance as much as possible
• Racing Spoiler
   
• ECE R-22.06 (EU) Approved. This helmet exceeds the highest safety standards and has passed, since its launch, the new ECE 22.06 test required for the European market
• Micrometric Double Toothed Closure – Redesigned micrometric retention system to keep the helmet always fastened and secured. The MT Helmets engineering department has developed this system to ensure that the fastener is locked by at least two points, ensuring that the system is secured. This locking system, optimal for sport-touring models, offers the best balance between wearing comfort and safety
• 1650 (+/-50) grams, its weight is well distributed
   
• Quick Visor Swap System – A system designed in-house by the MT Helmets Engineering team. The first helmet to feature this technology. This system, which has been patented by MT Helmets, allows the rider to attach/detach the visor really quickly and comfortably without having to take the helmet off
• Extended Vision Area – The extended vision area allows riders to have better visibility of their surroundings, increasing ride comfort and improving the riding experience and safety on the bike
• Extended Sun Visor Protection – Retractable sun visor system offering extended protection, preventing distortion due to changes in light conditions. It comes with a mechanism that can be quickly and comfortably used with one hand. It is also detachable for easy cleaning and maintenance.
• Pinlock 100% Max Vision – The Thunder 4 SV features space for a Pinlock 100% Max Vision insert
   
• The interior pads have been developed specifically for each helmet size to fit all head sizes in an optimal way
• The materials used for the manufacture of these elements combine different fabrics that favor ventilation, exhaust moisture, and drying quickly
• Removable and washable liners that allow you to keep your helmet clean and fresh
• Emergency Release System – Quick release system for side pads for removing the helmet in case of an accident. This system prevents possible damage during a helmet removal maneuver
• Universal Intercom Cage – This helmet has been developed taking into account the needs arising from the incorporation of an intercom system and has specific spaces to fit an intercom communication system

The most affordable helmet on the market, with the highest safety homologation. The MT Thunder 4 SV represents all the drive and technological evolution of MT Helmets.

The arrival of the new ECE 22.06 certification has made MT Helmets a specialist in safety homologations and sends a very clear message to the industry: now safety on a bike is within everyone’s reach.

Features:

• HIRP Shell (High Impact Resistant Polymer) for excellent impact response. 2 Shell Sizes
• Three-Point Protector System – The base of this helmet has a three-point support system that has been developed to provide good stability when the Thunder 4 SV is placed on flat surfaces. This makes it easier to handle the helmet for cleaning or maintenance, but also allows the elements inside the helmet to be insulated from the surface, protecting them from chafing and, above all, enhancing hygiene when using the helmet
• Airflow Channel System – Through fluid dynamics analysis, air channels have been designed to minimize air resistance and boost internal ventilation flow, reducing temperature and moisture inside the helmet
• Reduced Aero Drag Design – An aerodynamic design studied by the MT Helmets engineering team to reduce aerodynamic resistance as much as possible
• Racing Spoiler
   
• ECE R-22.06 (EU) Approved. This helmet exceeds the highest safety standards and has passed, since its launch, the new ECE 22.06 test required for the European market
• Micrometric Double Toothed Closure – Redesigned micrometric retention system to keep the helmet always fastened and secured. The MT Helmets engineering department has developed this system to ensure that the fastener is locked by at least two points, ensuring that the system is secured. This locking system, optimal for sport-touring models, offers the best balance between wearing comfort and safety
• 1650 (+/-50) grams, its weight is well distributed
   
• Quick Visor Swap System – A system designed in-house by the MT Helmets Engineering team. The first helmet to feature this technology. This system, which has been patented by MT Helmets, allows the rider to attach/detach the visor really quickly and comfortably without having to take the helmet off
• Extended Vision Area – The extended vision area allows riders to have better visibility of their surroundings, increasing ride comfort and improving the riding experience and safety on the bike
• Extended Sun Visor Protection – Retractable sun visor system offering extended protection, preventing distortion due to changes in light conditions. It comes with a mechanism that can be quickly and comfortably used with one hand. It is also detachable for easy cleaning and maintenance.
• Pinlock 100% Max Vision – The Thunder 4 SV features space for a Pinlock 100% Max Vision insert
   
• The interior pads have been developed specifically for each helmet size to fit all head sizes in an optimal way
• The materials used for the manufacture of these elements combine different fabrics that favor ventilation, exhaust moisture, and drying quickly
• Removable and washable liners that allow you to keep your helmet clean and fresh
• Emergency Release System – Quick release system for side pads for removing the helmet in case of an accident. This system prevents possible damage during a helmet removal maneuver
• Universal Intercom Cage – This helmet has been developed taking into account the needs arising from the incorporation of an intercom system and has specific spaces to fit an intercom communication system

There's nothing stingy about the Stinger 2 helmet.

This sporty, entry-level model offers high-end performance and features for an incredibly competitive price.

The MT Stinger 2 has the latest ECE22.06 safety requirements. This full face helmet has been improved in many ways, but still proves that MT excels in affordable high performance helmets. The new Stinger 2 features a larger spoiler for better aerodynamics at higher speeds, the ventilation has been improved for even more comfort, even on the most sunny days. The helmet is equipped with a MaxVision pinlock prepared visor for a large field of view, resulting in a lot of safety on the road. The MaxVision Pinlock can be ordered in the bundle.

With comfort in mind, the Stinger 2 is equipped with a nice wide collar and wind guard to reduce wind noise and improve comfort. The inner lining is fully removable and washable. The helmet is equipped with a steel micrometic chin closure that can be easily operated with gloves on. This new MT Stinger 2 is therefore extremely suitable for moped and scooter use, or for the novice motorcyclist.

Key Features
• Lightweight HIRP (High Impact Resistant Polymer) shell
• 1 outer shell size
• Hi-impact absorption inner shell
• Homologated front protection "P"
• Multiple density EPS liner
• Anti-allergenic, breathable, moisture-wicking fabric blend for comfort and durability
• Removable and washable liner
• Perfect fit thanks to different interior sizes
• Breath deflector to prevent screen fogging
• Prepared for an intercom system
• Micrometric buckle
• Visor: MT-V-28B
• High-quality optical polycarbonate visor with quick release and pivoting visor mechanism
• Pinlock MaxVision insert ready: DKS435
• Front and top air vents with open/close system
• Interior air flow channels for temperature and moisture management
• Air extraction through rear vents to maximise airflow
• Rear deflector optimises the aerodynamics of this helmet
• Weight: 1450 grams (+/- 50 grams)
• ECE 22.06

The most affordable helmet on the market, with the highest safety homologation. The MT Thunder 4 SV represents all the drive and technological evolution of MT Helmets.

The arrival of the new ECE 22.06 certification has made MT Helmets a specialist in safety homologations and sends a very clear message to the industry: now safety on a bike is within everyone’s reach.

Features:

• HIRP Shell (High Impact Resistant Polymer) for excellent impact response. 2 Shell Sizes
• Three-Point Protector System – The base of this helmet has a three-point support system that has been developed to provide good stability when the Thunder 4 SV is placed on flat surfaces. This makes it easier to handle the helmet for cleaning or maintenance, but also allows the elements inside the helmet to be insulated from the surface, protecting them from chafing and, above all, enhancing hygiene when using the helmet
• Airflow Channel System – Through fluid dynamics analysis, air channels have been designed to minimize air resistance and boost internal ventilation flow, reducing temperature and moisture inside the helmet
• Reduced Aero Drag Design – An aerodynamic design studied by the MT Helmets engineering team to reduce aerodynamic resistance as much as possible
• Racing Spoiler
   
• ECE R-22.06 (EU) Approved. This helmet exceeds the highest safety standards and has passed, since its launch, the new ECE 22.06 test required for the European market
• Micrometric Double Toothed Closure – Redesigned micrometric retention system to keep the helmet always fastened and secured. The MT Helmets engineering department has developed this system to ensure that the fastener is locked by at least two points, ensuring that the system is secured. This locking system, optimal for sport-touring models, offers the best balance between wearing comfort and safety
• 1650 (+/-50) grams, its weight is well distributed
   
• Quick Visor Swap System – A system designed in-house by the MT Helmets Engineering team. The first helmet to feature this technology. This system, which has been patented by MT Helmets, allows the rider to attach/detach the visor really quickly and comfortably without having to take the helmet off
• Extended Vision Area – The extended vision area allows riders to have better visibility of their surroundings, increasing ride comfort and improving the riding experience and safety on the bike
• Extended Sun Visor Protection – Retractable sun visor system offering extended protection, preventing distortion due to changes in light conditions. It comes with a mechanism that can be quickly and comfortably used with one hand. It is also detachable for easy cleaning and maintenance.
• Pinlock 100% Max Vision – The Thunder 4 SV features space for a Pinlock 100% Max Vision insert
   
• The interior pads have been developed specifically for each helmet size to fit all head sizes in an optimal way
• The materials used for the manufacture of these elements combine different fabrics that favor ventilation, exhaust moisture, and drying quickly
• Removable and washable liners that allow you to keep your helmet clean and fresh
• Emergency Release System – Quick release system for side pads for removing the helmet in case of an accident. This system prevents possible damage during a helmet removal maneuver
• Universal Intercom Cage – This helmet has been developed taking into account the needs arising from the incorporation of an intercom system and has specific spaces to fit an intercom communication system

There's nothing stingy about the Stinger 2 helmet.

This sporty, entry-level model offers high-end performance and features for an incredibly competitive price.

The MT Stinger 2 has the latest ECE22.06 safety requirements. This full face helmet has been improved in many ways, but still proves that MT excels in affordable high performance helmets. The new Stinger 2 features a larger spoiler for better aerodynamics at higher speeds, the ventilation has been improved for even more comfort, even on the most sunny days. The helmet is equipped with a MaxVision pinlock prepared visor for a large field of view, resulting in a lot of safety on the road. The MaxVision Pinlock can be ordered in the bundle.

With comfort in mind, the Stinger 2 is equipped with a nice wide collar and wind guard to reduce wind noise and improve comfort. The inner lining is fully removable and washable. The helmet is equipped with a steel micrometic chin closure that can be easily operated with gloves on. This new MT Stinger 2 is therefore extremely suitable for moped and scooter use, or for the novice motorcyclist.

Key Features
• Lightweight HIRP (High Impact Resistant Polymer) shell
• 1 outer shell size
• Hi-impact absorption inner shell
• Homologated front protection "P"
• Multiple density EPS liner
• Anti-allergenic, breathable, moisture-wicking fabric blend for comfort and durability
• Removable and washable liner
• Perfect fit thanks to different interior sizes
• Breath deflector to prevent screen fogging
• Prepared for an intercom system
• Micrometric buckle
• Visor: MT-V-28B
• High-quality optical polycarbonate visor with quick release and pivoting visor mechanism
• Pinlock MaxVision insert ready: DKS435
• Front and top air vents with open/close system
• Interior air flow channels for temperature and moisture management
• Air extraction through rear vents to maximise airflow
• Rear deflector optimises the aerodynamics of this helmet
• Weight: 1450 grams (+/- 50 grams)
• ECE 22.06

There's nothing stingy about the Stinger 2 helmet.

This sporty, entry-level model offers high-end performance and features for an incredibly competitive price.

The MT Stinger 2 has the latest ECE22.06 safety requirements. This full face helmet has been improved in many ways, but still proves that MT excels in affordable high performance helmets. The new Stinger 2 features a larger spoiler for better aerodynamics at higher speeds, the ventilation has been improved for even more comfort, even on the most sunny days. The helmet is equipped with a MaxVision pinlock prepared visor for a large field of view, resulting in a lot of safety on the road. The MaxVision Pinlock can be ordered in the bundle.

With comfort in mind, the Stinger 2 is equipped with a nice wide collar and wind guard to reduce wind noise and improve comfort. The inner lining is fully removable and washable. The helmet is equipped with a steel micrometic chin closure that can be easily operated with gloves on. This new MT Stinger 2 is therefore extremely suitable for moped and scooter use, or for the novice motorcyclist.

Key Features
• Lightweight HIRP (High Impact Resistant Polymer) shell
• 1 outer shell size
• Hi-impact absorption inner shell
• Homologated front protection "P"
• Multiple density EPS liner
• Anti-allergenic, breathable, moisture-wicking fabric blend for comfort and durability
• Removable and washable liner
• Perfect fit thanks to different interior sizes
• Breath deflector to prevent screen fogging
• Prepared for an intercom system
• Micrometric buckle
• Visor: MT-V-28B
• High-quality optical polycarbonate visor with quick release and pivoting visor mechanism
• Pinlock MaxVision insert ready: DKS435
• Front and top air vents with open/close system
• Interior air flow channels for temperature and moisture management
• Air extraction through rear vents to maximise airflow
• Rear deflector optimises the aerodynamics of this helmet
• Weight: 1450 grams (+/- 50 grams)
• ECE 22.06

The perfect helmet for any use. This model has an excellent fitting and also attractive graphics. Special comfort fabrics.
Can be used like Snowmobile helmet with snow breathguard, snowmobile neck curtain and “double or electric lens”.

Features:

• Aerodynamic Shape
• Homologated Front Protection "P"
• Removable and Washable Pads
• Inner Shell with Hi-Impact Absortion
• Fire Retardant Fabric Lining
• Multiple Density Inner Shell
• Anti Scratch Visor in Optical Polycarbonate
• Quick Release Visor
• Optimum Visor Closing
• Pinlock Ready
• Metallic Quick Release Micrometric Buckle
• Weight 1450g
• MT-V-14 visor

MT’s do-it-all go anywhere helmet. For the urban commute or the long tour, the new Thunder 3 SV will accommodate any ride you throw at it. A multi dimensional fit and available in 2 shell sizes, this helmet will comfortably fit most head shapes. Features an internal drop down visor and a Pinlock Max vision visor.

Features:

• 4/5 Star Sharp Rating
• Drop Down Inner Sun Visor
• Hi-Impact Absorption Inner Shell
• Multiple Density EPS Liner
• Optimum Visor Closing
• Homologated Front Protection “P”
• Quick Release Micrometric Buckle
• 2 Outer Shell Sizes
• Pinlock Max Vision Visor
• Removable And Washable Liner
• Optically Correct Anti Scratch Polycarbonate Visor
• Quick Release Visor
• Aerodynamic Design
• Vent System
• ECE/ONU.22.05.P
• NBR7471
• NTC 4533
• ACU Gold Standard
• Glow In The Dark Features
• MT-V-12 Pinlock Max visor

MT’s do-it-all go anywhere helmet. For the urban commute or the long tour, the new Thunder 3 SV will accommodate any ride you throw at it. A multi dimensional fit and available in 2 shell sizes, this helmet will comfortably fit most head shapes. Features an internal drop down visor and a Pinlock Max vision visor.

Features:

• 4/5 Star Sharp Rating
• Drop Down Inner Sun Visor
• Hi-Impact Absorption Inner Shell
• Multiple Density EPS Liner
• Optimum Visor Closing
• Homologated Front Protection “P”
• Quick Release Micrometric Buckle
• 2 Outer Shell Sizes
• Pinlock Max Vision Visor
• Removable And Washable Liner
• Optically Correct Anti Scratch Polycarbonate Visor
• Quick Release Visor
• Aerodynamic Design
• Vent System
• ECE/ONU.22.05.P
• NBR7471
• NTC 4533
• ACU Gold Standard
• Glow In The Dark Features
• MT-V-12 Pinlock Max visor

The perfect sport helmet, now with a new innovative pro spoiler. Excellent fit with attractive graphics and comfort fabrics used internally!

Features:

• HIRP Shell (High Impact Resistant Polymer) , 1 shell size. Aerodynamic design
• New innovative spoiler design
• Removable and Washable lining
• Anti-allergic fabrics
• Inner ventilation system
• Pinlock Ready
• Full metallic micrometric buckle
• Multi-density inner polystyrene
• Optical polycarbonate, anti-scratch visor. Quick release function and locking system
• Pivoting visor mechanism
• Weight 1450g (+/- 50g)
• MT-V-14 visor, 2.2mm thickness

Note: Tinted visor pictured is available as an optional extra.

The perfect sport helmet, now with a new innovative pro spoiler. Excellent fit with attractive graphics and comfort fabrics used internally!

Features:

• HIRP Shell (High Impact Resistant Polymer) , 1 shell size. Aerodynamic design
• New innovative spoiler design
• Removable and Washable lining
• Anti-allergic fabrics
• Inner ventilation system
• Pinlock Ready
• Full metallic micrometric buckle
• Multi-density inner polystyrene
• Optical polycarbonate, anti-scratch visor. Quick release function and locking system
• Pivoting visor mechanism
• Weight 1450g (+/- 50g)
• MT-V-14 visor, 2.2mm thickness

The perfect sport helmet, now with a new innovative pro spoiler. Excellent fit with attractive graphics and comfort fabrics used internally!

Features:

• HIRP Shell (High Impact Resistant Polymer) , 1 shell size. Aerodynamic design
• New innovative spoiler design
• Removable and Washable lining
• Anti-allergic fabrics
• Inner ventilation system
• Pinlock Ready
• Full metallic micrometric buckle
• Multi-density inner polystyrene
• Optical polycarbonate, anti-scratch visor. Quick release function and locking system
• Pivoting visor mechanism
• Weight 1450g (+/- 50g)
• MT-V-14 visor, 2.2mm thickness

Note: Tinted visor pictured is available as an optional extra.

The perfect sport helmet, now with a new innovative pro spoiler. Excellent fit with attractive graphics and comfort fabrics used internally!

Features:

• HIRP Shell (High Impact Resistant Polymer) , 1 shell size. Aerodynamic design
• New innovative spoiler design
• Removable and Washable lining
• Anti-allergic fabrics
• Inner ventilation system
• Pinlock Ready
• Full metallic micrometric buckle
• Multi-density inner polystyrene
• Optical polycarbonate, anti-scratch visor. Quick release function and locking system
• Pivoting visor mechanism
• Weight 1450g (+/- 50g)
• MT-V-14 visor, 2.2mm thickness

The best helmet for any use, made from technologies developed for MotoGP™.

AGV fulfill all of your motorcycle helmet needs by harvesting the best characteristics from sport and touring helmets and infusing them into the AGV K6 Helmet. Its shell is comprised of carbon and aramid fibres for excellent protection - the K6's protective capacity is 48% higher than that required by legislation. All this plus lightness like none other. The helmet's versatility comes from its aerodynamic shape that works well in any riding position. Four different shell sizes allow for a broad size range to better fit your particular head circumference and shape. Moisture wicking liners absorb sweat to keep you comfortable on extended rides. The AGV K6 Helmet is the culmination of all of AGV's road helmet technology to create a single helmet for all riders. 

Features:

• Carbon-aramid shell
• 4 shell sizes: XS-SM, MS, ML-LG, XL-2XL
• 5 density EPS in 4 sizes
• Collarbone safe profile
• 5 adjustable front vents
• 1 wide rear vent
• Shell shaped designed to reduce turbulence and optimized for all riding positions
• Ritmo and Shalimar fabric cheek pads
• Shalimar fabric head liner
• Abrasion and water resistance neck roll for extra durability
• 2Dry moisture wicking system
• Eyeglasses friendly fit
• Removable breath guard included
• K6 helmet specific 4mm thick, anti-scratch Pinlock-ready visor
• Pinlock lens insert included
• Innovative shield pivot reduces size and weight
• Double-D chinstrap
• DOT and ECE approved

The best helmet for any use, made from technologies developed for MotoGP™.

AGV fulfill all of your motorcycle helmet needs by harvesting the best characteristics from sport and touring helmets and infusing them into the AGV K6 Helmet. Its shell is comprised of carbon and aramid fibres for excellent protection - the K6's protective capacity is 48% higher than that required by legislation. All this plus lightness like none other. The helmet's versatility comes from its aerodynamic shape that works well in any riding position. Four different shell sizes allow for a broad size range to better fit your particular head circumference and shape. Moisture wicking liners absorb sweat to keep you comfortable on extended rides. The AGV K6 Helmet is the culmination of all of AGV's road helmet technology to create a single helmet for all riders. 

Features:

• Carbon-aramid shell
• 4 shell sizes: XS-SM, MS, ML-LG, XL-2XL
• 5 density EPS in 4 sizes
• Collarbone safe profile
• 5 adjustable front vents
• 1 wide rear vent
• Shell shaped designed to reduce turbulence and optimized for all riding positions
• Ritmo and Shalimar fabric cheek pads
• Shalimar fabric head liner
• Abrasion and water resistance neck roll for extra durability
• 2Dry moisture wicking system
• Eyeglasses friendly fit
• Removable breath guard included
• K6 helmet specific 4mm thick, anti-scratch Pinlock-ready visor
• Pinlock lens insert included
• Innovative shield pivot reduces size and weight
• Double-D chinstrap
• DOT and ECE approved

The most affordable helmet on the market, with the highest safety homologation. The MT Thunder 4 SV represents all the drive and technological evolution of MT Helmets.

The arrival of the new ECE 22.06 certification has made MT Helmets a specialist in safety homologations and sends a very clear message to the industry: now safety on a bike is within everyone’s reach.

Features:

• HIRP Shell (High Impact Resistant Polymer) for excellent impact response. 2 Shell Sizes
• Three-Point Protector System – The base of this helmet has a three-point support system that has been developed to provide good stability when the Thunder 4 SV is placed on flat surfaces. This makes it easier to handle the helmet for cleaning or maintenance, but also allows the elements inside the helmet to be insulated from the surface, protecting them from chafing and, above all, enhancing hygiene when using the helmet
• Airflow Channel System – Through fluid dynamics analysis, air channels have been designed to minimize air resistance and boost internal ventilation flow, reducing temperature and moisture inside the helmet
• Reduced Aero Drag Design – An aerodynamic design studied by the MT Helmets engineering team to reduce aerodynamic resistance as much as possible
• Racing Spoiler
   
• ECE R-22.06 (EU) Approved. This helmet exceeds the highest safety standards and has passed, since its launch, the new ECE 22.06 test required for the European market
• Micrometric Double Toothed Closure – Redesigned micrometric retention system to keep the helmet always fastened and secured. The MT Helmets engineering department has developed this system to ensure that the fastener is locked by at least two points, ensuring that the system is secured. This locking system, optimal for sport-touring models, offers the best balance between wearing comfort and safety
• 1650 (+/-50) grams, its weight is well distributed
   
• Quick Visor Swap System – A system designed in-house by the MT Helmets Engineering team. The first helmet to feature this technology. This system, which has been patented by MT Helmets, allows the rider to attach/detach the visor really quickly and comfortably without having to take the helmet off
• Extended Vision Area – The extended vision area allows riders to have better visibility of their surroundings, increasing ride comfort and improving the riding experience and safety on the bike
• Extended Sun Visor Protection – Retractable sun visor system offering extended protection, preventing distortion due to changes in light conditions. It comes with a mechanism that can be quickly and comfortably used with one hand. It is also detachable for easy cleaning and maintenance.
• Pinlock 100% Max Vision – The Thunder 4 SV features space for a Pinlock 100% Max Vision insert
   
• The interior pads have been developed specifically for each helmet size to fit all head sizes in an optimal way
• The materials used for the manufacture of these elements combine different fabrics that favor ventilation, exhaust moisture, and drying quickly
• Removable and washable liners that allow you to keep your helmet clean and fresh
• Emergency Release System – Quick release system for side pads for removing the helmet in case of an accident. This system prevents possible damage during a helmet removal maneuver
• Universal Intercom Cage – This helmet has been developed taking into account the needs arising from the incorporation of an intercom system and has specific spaces to fit an intercom communication system

MT’s do-it-all go anywhere helmet. For the urban commute or the long tour, the new Thunder 3 SV will accommodate any ride you throw at it. A multi dimensional fit and available in 2 shell sizes, this helmet will comfortably fit most head shapes. Features an internal drop down visor and a Pinlock Max vision visor.

Features:

• 4/5 Star Sharp Rating
• Drop Down Inner Sun Visor
• Hi-Impact Absorption Inner Shell
• Multiple Density EPS Liner
• Optimum Visor Closing
• Homologated Front Protection “P”
• Quick Release Micrometric Buckle
• 2 Outer Shell Sizes
• Pinlock Max Vision Visor
• Removable And Washable Liner
• Optically Correct Anti Scratch Polycarbonate Visor
• Quick Release Visor
• Aerodynamic Design
• Vent System
• ECE/ONU.22.05.P
• NBR7471
• NTC 4533
• ACU Gold Standard
• Glow In The Dark Features
• MT-V-12 Pinlock Max visor

The most affordable helmet on the market, with the highest safety homologation. The MT Thunder 4 SV represents all the drive and technological evolution of MT Helmets.

The arrival of the new ECE 22.06 certification has made MT Helmets a specialist in safety homologations and sends a very clear message to the industry: now safety on a bike is within everyone’s reach.

Features:

• HIRP Shell (High Impact Resistant Polymer) for excellent impact response. 2 Shell Sizes
• Three-Point Protector System – The base of this helmet has a three-point support system that has been developed to provide good stability when the Thunder 4 SV is placed on flat surfaces. This makes it easier to handle the helmet for cleaning or maintenance, but also allows the elements inside the helmet to be insulated from the surface, protecting them from chafing and, above all, enhancing hygiene when using the helmet
• Airflow Channel System – Through fluid dynamics analysis, air channels have been designed to minimize air resistance and boost internal ventilation flow, reducing temperature and moisture inside the helmet
• Reduced Aero Drag Design – An aerodynamic design studied by the MT Helmets engineering team to reduce aerodynamic resistance as much as possible
• Racing Spoiler
   
• ECE R-22.06 (EU) Approved. This helmet exceeds the highest safety standards and has passed, since its launch, the new ECE 22.06 test required for the European market
• Micrometric Double Toothed Closure – Redesigned micrometric retention system to keep the helmet always fastened and secured. The MT Helmets engineering department has developed this system to ensure that the fastener is locked by at least two points, ensuring that the system is secured. This locking system, optimal for sport-touring models, offers the best balance between wearing comfort and safety
• 1650 (+/-50) grams, its weight is well distributed
   
• Quick Visor Swap System – A system designed in-house by the MT Helmets Engineering team. The first helmet to feature this technology. This system, which has been patented by MT Helmets, allows the rider to attach/detach the visor really quickly and comfortably without having to take the helmet off
• Extended Vision Area – The extended vision area allows riders to have better visibility of their surroundings, increasing ride comfort and improving the riding experience and safety on the bike
• Extended Sun Visor Protection – Retractable sun visor system offering extended protection, preventing distortion due to changes in light conditions. It comes with a mechanism that can be quickly and comfortably used with one hand. It is also detachable for easy cleaning and maintenance.
• Pinlock 100% Max Vision – The Thunder 4 SV features space for a Pinlock 100% Max Vision insert
   
• The interior pads have been developed specifically for each helmet size to fit all head sizes in an optimal way
• The materials used for the manufacture of these elements combine different fabrics that favor ventilation, exhaust moisture, and drying quickly
• Removable and washable liners that allow you to keep your helmet clean and fresh
• Emergency Release System – Quick release system for side pads for removing the helmet in case of an accident. This system prevents possible damage during a helmet removal maneuver
• Universal Intercom Cage – This helmet has been developed taking into account the needs arising from the incorporation of an intercom system and has specific spaces to fit an intercom communication system

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

Progressively styled and rigorously tested, our ECE-certified helmet is a top choice for riders who demand comfort and high performance. Features include a rugged ABS outer shell, ventilated EPS safety liner, replaceable comfort liner and a clear anti-fog shield.

Features:

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad features front and side vents for airflow
• CE-certified polycarbonate shield includes anti-fog and anti-scratch treatments for safety and durability
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Molded recesses inside EPS interior shell accept select aftermarket audio and communication components
• Rugged shield hinge hardware with robust detents allows you to open the shield at slow speeds for increased airflow

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

An old favorite but now with a new fit and new features. Our latest Gringo S helmet now meets the new European ECE 22.06 regs. The shield mechanism now uses the same anti-rattle closure featured on our Lane Splitter helmets. Three shell sizes replace the previous two for improved fit and comfort.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved. We will have replacement shields in different tints available soon!

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

Gringo takes its '60s motorsport aesthetic and elevates it to modern ECE R22.05 motorcycle standards—the European test protocol recognized by leading helmet makers and independent safety labs as the toughest in the world.

Features:

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad dissipates energy during frontal impacts
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Molded recesses inside EPS designed to accept various aftermarket audio and communication components
• ECE R22.05 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

An old favorite but now with a new fit and new features. Our latest Gringo S helmet now meets the new European ECE 22.06 regs. The shield mechanism now uses the same anti-rattle closure featured on our Lane Splitter helmets. Three shell sizes replace the previous two for improved fit and comfort.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved. 

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

An old favorite but now with a new fit and new features. Our latest Gringo S helmet now meets the new European ECE 22.06 regs. The shield mechanism now uses the same anti-rattle closure featured on our Lane Splitter helmets. Three shell sizes replace the previous two for improved fit and comfort.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

An old favorite but now with a new fit and new features. Our latest Gringo S helmet now meets the new European ECE 22.06 regs. The shield mechanism now uses the same anti-rattle closure featured on our Lane Splitter helmets. Three shell sizes replace the previous two for improved fit and comfort.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved. We will have replacement shields in different tints available soon!

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

An old favorite but now with a new fit and new features. Our latest Gringo S helmet now meets the new European ECE 22.06 regs. The shield mechanism now uses the same anti-rattle closure featured on our Lane Splitter helmets. Three shell sizes replace the previous two for improved fit and comfort.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved. We will have replacement shields in different tints available soon!

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

The best helmet for any use, made from technologies developed for MotoGP™.

Finally, a comfortable, versatile, and safe road helmet for any use, any motorbike, and any rider thanks to the same advanced materials and innovative technology used to help world champions achieve the maximum in the most extreme conditions.

Everything you need is now combined with everything you've ever wanted.

ECE22.06 Approved

A protection that exceeds every expectation

K6 S provides the security riders need to fully express themselves in any situation, due to its world championship level protection. The premium carbon-aramid fiber shell and five EPS densities offer the same protection that professional MotoGP™ riders are guaranteed. Due to the stringent AGV Extreme Safety design protocol, K6 S passes all the tests required by the strict ECE22.06 standard by a large margin, making the helmet safer than the levels required by the latest road homologations.
All this plus lightness like none other.

Every detail is designed to protect

Every detail of K6 S is designed to guarantee the safety of its wearer. The visor mechanisms are incredibly small, to maximize EPS on the surface and maximize the area covered by ​​the shell. The profile of the helmet is designed to minimize the chances of impact with the collarbone.
An AGV invention, now a racing world standard.

Ultravision: see more, under any circumstance

Exclusive AGV Ultravision guarantees 190° horizontal field of vision which means seeing the road, the corners, and the obstacles better, and ahead of time. The Optical Class 1 visor features the 100% Max Vision Pinlock 120 anti-fog system and is up to 4.3 mm thick. The Micro-Lock system allows the visor to be opened for air flow while keeping the visor securely fastened to the chinguard. High level characteristics that are designed to instill the confidence needed to win a world championship and that are now available on a helmet for any use.

Put it on, you barely feel it

Just 1255 grams. The premium materials used for the shell and the innovative technological solutions reduce the weight of the K6 S to a minimum, making it one of the lightest road helmets in the world. The lightest of all in its category. This lightness makes riding comfortable and reduces fatigue so that you can tackle even the longest trips without getting distracted.

The only thing you'll feel on your head is total comfort.

The quality of the interior really makes the difference

The interior of the K6 S is made of select materials developed by AGV to meet the needs of MotoGP™ riders who take on the most extreme conditions on track. The external liner is made of wear-proof, waterproof fabric that keeps water out even during the heaviest rainfall. The interior liner is made of a breathable fabric that absorbs sweat in record time, leaving your face dry at all times.

Perfect ventilation no matter what road you take

Five large air vents are positioned where the greatest air flow is so that you can personalize ventilation and get the most under any conditions. The central air vent is located at the point of maximum air pressure to ventilate inside the upper part of the helmet. The ergonomic shape of the adjusters is optimized for use while wearing gloves. The visor comes with the AGV Micro-Lock system which offers another air entry point without affecting the protective capacity at all.

Cuts through the air without moving: aerodynamics you can feel

Aerodynamics do not just help with lap times. Due to the exclusive design of its shell and its rear spoiler, K6 S splits the air and remains very stable even at high speeds. This is an advantage in terms of performance and comfort, both for sports riding on hairpin turns and during long trips on highways.
The K6 S design guarantees minimum aerodynamic resistance, making the most of the lift to obtain zero Z-lift at cruising speed. It means that at a speed of 130 km/h the helmet has a dynamic weight of zero.

You'll feel the difference, in any situation.

Always the right position for maximum performance

The K6 S is designed for optimal performance no matter the riding position, whether comfortable for cruising and sport touring, strenuous for traffic-filled city streets, or sporty, tucked inside the fairing. Its aerodynamic performance is exceptional regardless of what you're used to in order to meet every rider's need in any situation.

So balanced, it is even lighter

As if holding the record for lightness in the category weren't enough, the K6 S is designed to be highly balanced and have a neutral dynamic weight. The optimal load distribution means the bulk of the helmet is not felt on the head. It's like having all the advantages of a helmet without the fatigue of wearing one.

The new AGV K6 S, The comfort you need, the performance you've always wanted.

The best helmet for any use, made from technologies developed for MotoGP™.

Finally, a comfortable, versatile, and safe road helmet for any use, any motorbike, and any rider thanks to the same advanced materials and innovative technology used to help world champions achieve the maximum in the most extreme conditions.

Everything you need is now combined with everything you've ever wanted.

ECE22.06 Approved

A protection that exceeds every expectation

K6 S provides the security riders need to fully express themselves in any situation, due to its world championship level protection. The premium carbon-aramid fiber shell and five EPS densities offer the same protection that professional MotoGP™ riders are guaranteed. Due to the stringent AGV Extreme Safety design protocol, K6 S passes all the tests required by the strict ECE22.06 standard by a large margin, making the helmet safer than the levels required by the latest road homologations.
All this plus lightness like none other.

Every detail is designed to protect

Every detail of K6 S is designed to guarantee the safety of its wearer. The visor mechanisms are incredibly small, to maximize EPS on the surface and maximize the area covered by ​​the shell. The profile of the helmet is designed to minimize the chances of impact with the collarbone.
An AGV invention, now a racing world standard.

Ultravision: see more, under any circumstance

Exclusive AGV Ultravision guarantees 190° horizontal field of vision which means seeing the road, the corners, and the obstacles better, and ahead of time. The Optical Class 1 visor features the 100% Max Vision Pinlock 120 anti-fog system and is up to 4.3 mm thick. The Micro-Lock system allows the visor to be opened for air flow while keeping the visor securely fastened to the chinguard. High level characteristics that are designed to instill the confidence needed to win a world championship and that are now available on a helmet for any use.

Put it on, you barely feel it

Just 1255 grams. The premium materials used for the shell and the innovative technological solutions reduce the weight of the K6 S to a minimum, making it one of the lightest road helmets in the world. The lightest of all in its category. This lightness makes riding comfortable and reduces fatigue so that you can tackle even the longest trips without getting distracted.

The only thing you'll feel on your head is total comfort.

The quality of the interior really makes the difference

The interior of the K6 S is made of select materials developed by AGV to meet the needs of MotoGP™ riders who take on the most extreme conditions on track. The external liner is made of wear-proof, waterproof fabric that keeps water out even during the heaviest rainfall. The interior liner is made of a breathable fabric that absorbs sweat in record time, leaving your face dry at all times.

Perfect ventilation no matter what road you take

Five large air vents are positioned where the greatest air flow is so that you can personalize ventilation and get the most under any conditions. The central air vent is located at the point of maximum air pressure to ventilate inside the upper part of the helmet. The ergonomic shape of the adjusters is optimized for use while wearing gloves. The visor comes with the AGV Micro-Lock system which offers another air entry point without affecting the protective capacity at all.

Cuts through the air without moving: aerodynamics you can feel

Aerodynamics do not just help with lap times. Due to the exclusive design of its shell and its rear spoiler, K6 S splits the air and remains very stable even at high speeds. This is an advantage in terms of performance and comfort, both for sports riding on hairpin turns and during long trips on highways.
The K6 S design guarantees minimum aerodynamic resistance, making the most of the lift to obtain zero Z-lift at cruising speed. It means that at a speed of 130 km/h the helmet has a dynamic weight of zero.

You'll feel the difference, in any situation.

Always the right position for maximum performance

The K6 S is designed for optimal performance no matter the riding position, whether comfortable for cruising and sport touring, strenuous for traffic-filled city streets, or sporty, tucked inside the fairing. Its aerodynamic performance is exceptional regardless of what you're used to in order to meet every rider's need in any situation.

So balanced, it is even lighter

As if holding the record for lightness in the category weren't enough, the K6 S is designed to be highly balanced and have a neutral dynamic weight. The optimal load distribution means the bulk of the helmet is not felt on the head. It's like having all the advantages of a helmet without the fatigue of wearing one.

The new AGV K6 S, The comfort you need, the performance you've always wanted.