Road Helmets

The AGV AX-9 Carbon Helmet is an all-new design over the popular AX-8 Dual EVO Helmet. It starts with an ultra-lightweight 100% carbon fibre shell and a redesigned peak for optimal aerodynamics. The peak itself is adjustable to reduce the sail effect at high speeds. Superior ventilation is achieved with 5 total vents: an adjustable chin-vent, two brow inlets and 2 extractors.  The design of this helmet also allows for four different configurations --  peak / visor, no peak / visor, peak / goggles, no peak / goggles -- meaning it can handle practically any riding scenario.

On the inside, the helmet has a fit to allow for comfort while wearing glasses and the padding is treated for optimal comfort. The cheek pads and top liner are moisture wicking and the neckroll is water resistant to prevent water from getting inside the helmet.

Features:

• 100% carbon fibre shell
• Three shell sizes: XS-MS, ML-XL, 2XL
• Tool-less, removable chin vent guard
• Five vents: adjustable chin-vent, two brow inlets, 2 extractors
• Panoramic, Pinlock-ready visor 
• Adjustable peak to reduce sail effect
• Double-D strap
• Speaker pockets

The AGV AX-9 Carbon-Aramid Helmet is an all-new design over the popular AX-8 Dual EVO Helmet. It starts with an ultra-lightweight 100% carbon fibre shell and a redesigned peak for optimal aerodynamics. The peak itself is adjustable to reduce the sail effect at high speeds. Superior ventilation is achieved with 5 total vents: an adjustable chin-vent, two brow inlets and 2 extractors.  The design of this helmet also allows for four different configurations --  peak / visor, no peak / visor, peak / goggles, no peak / goggles -- meaning it can handle practically any riding scenario.

On the inside, the helmet has a fit to allow for comfort while wearing glasses and the padding is treated for optimal comfort. The cheek pads and top liner are moisture wicking and the neckroll is water resistant to prevent water from getting inside the helmet.

Features:

• Carbon-Aramid Fibreglass (Trail Gunmetal/Orange)
• Three shell sizes: XS-MS, ML-XL, 2XL
• Tool-less, removable chin vent guard
• Five vents: adjustable chin-vent, two brow inlets, 2 extractors
• Panoramic, Pinlock-ready visor 
• Adjustable peak to reduce sail effect
• Double-D strap
• Speaker pockets

The K3 SV was developed from the experience AGV gained during the design process of the Pista GP and Corsa helmets. Thanks to the use of Finite Element Analysis (FEM), the technical department developed a benchmark product in terms of comfort, aerodynamics and safety. This helmet has a wide appeal and is suitable for young riders with a passion for racing as well as for more mature riders looking for comfort and high performance characteristics.

Thanks to CFD Analysis (Computational fluid dynamics), the special ventilation system provides maximum airflow to the head through two front and side vents, one central vent and two extractors at the back of the helmet.

The sanitized Dry-Comfort internal components can be removed for washing. The mechanism for opening and closing the visor has three customisable settings according to helmet use (Touring, Race and City) and features the XQRS system for quick removal.

The K-3 SV has been designed to accept the new genreation bluetooth communication systems.


Features:

• 2 sizes of HIR-TH shell (High Resistance Thermoplastic Resin)
• Inner shell in EPS in 4 sizes; shell and EPS dimensions optimised using the FEM (Finite Elements Analysis) system
• Homologation: ECE 2205, DOT, JIS, NBR, AS/NZS
• Ventilation system designed and optimised in a wind tunnel, comprising 4 front vents (3 at the front and one on the chin guard) and 2 rear extractors
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor mechanism with PVS system (Perimetrical Visor Seal) for improved seal and protection against draughts and noise thanks to the seat for the visor edge
• GT 2 scratch-resistant, anti-fog polycarbonate visor with 100% protection from UV rays
• Integrated removable Sun Visor (ISV) with scratch-resistant visor with tool-free replacement system
• Removable breath deflector
• Removable windproof chin strap protection
• Fully removable and washable 3D inner liners
• Sanitised Dry-Comfort fabrics
• Micrometrically adjustable strap retention system
• Anti-theft ring on strap

AGV’s latest version of this premium sport helmet now features a new construction for the inner liner, designed with high-performance fabrics and with no stitching in sensitive areas, making for an extremely comfortable fit.
The lightweight shell is made from a carbonfiberglass mix, while stability and aerodynamic performance are maximized thanks to an incorporated spoiler.
The Integrated Ventilation System (IVS) has vents that are hollowed into the shell, and there’s also an internal drop-down sun visor, a removable nose guard and a new wind protector that keeps noise to a minimum.

Features

• Shell in CAF (carbon-fiberglass)
• IVS (Integrated Ventilation System) with channels hollowed directly in the shell
• Double D retention system
• Sun visor
• Multi Density EPS
• The internal shape of the helmet was specifically designed to decrease the risk damage to the collar bones in the event of a fall
• Patented XQRS (Extra Quick Release System) visor mechanism in metal for very fast tool-free removal
• The visor is fitted with a patented micro-opening system
• Visor GT2 (ML-L-XL-XXL sizes) and GT2-1 (XS-S-MS sizes)
• Integrated spoiler
• Rear air extractors can be opened and closed
• Central air vent for optimal air flow
• Pinlock included in the box

AGV’s latest version of this premium sport helmet now features a new construction for the inner liner, designed with high-performance fabrics and with no stitching in sensitive areas, making for an extremely comfortable fit.
The lightweight shell is made from a carbonfiberglass mix, while stability and aerodynamic performance are maximized thanks to an incorporated spoiler.
The Integrated Ventilation System (IVS) has vents that are hollowed into the shell, and there’s also an internal drop-down sun visor, a removable nose guard and a new wind protector that keeps noise to a minimum.

Features

• Shell in CAF (carbon-fiberglass)
• IVS (Integrated Ventilation System) with channels hollowed directly in the shell
• Double D retention system
• Sun visor
• Multi Density EPS
• The internal shape of the helmet was specifically designed to decrease the risk damage to the collar bones in the event of a fall
• Patented XQRS (Extra Quick Release System) visor mechanism in metal for very fast tool-free removal
• The visor is fitted with a patented micro-opening system
• Visor GT2 (ML-L-XL-XXL sizes) and GT2-1 (XS-S-MS sizes)
• Integrated spoiler
• Rear air extractors can be opened and closed
• Central air vent for optimal air flow
• Pinlock included in the box

AGV’s latest version of this premium sport helmet now features a new construction for the inner liner, designed with high-performance fabrics and with no stitching in sensitive areas, making for an extremely comfortable fit.
The lightweight shell is made from a carbonfiberglass mix, while stability and aerodynamic performance are maximized thanks to an incorporated spoiler.
The Integrated Ventilation System (IVS) has vents that are hollowed into the shell, and there’s also an internal drop-down sun visor, a removable nose guard and a new wind protector that keeps noise to a minimum.

Features

• Shell in CAF (carbon-fiberglass)
• IVS (Integrated Ventilation System) with channels hollowed directly in the shell
• Double D retention system
• Sun visor
• Multi Density EPS
• The internal shape of the helmet was specifically designed to decrease the risk damage to the collar bones in the event of a fall
• Patented XQRS (Extra Quick Release System) visor mechanism in metal for very fast tool-free removal
• The visor is fitted with a patented micro-opening system
• Visor GT2 (ML-L-XL-XXL sizes) and GT2-1 (XS-S-MS sizes)
• Integrated spoiler
• Rear air extractors can be opened and closed
• Central air vent for optimal air flow
• Pinlock included in the box

The best helmet for any use, made from technologies developed for MotoGP™.

AGV fulfill all of your motorcycle helmet needs by harvesting the best characteristics from sport and touring helmets and infusing them into the AGV K6 Helmet. Its shell is comprised of carbon and aramid fibres for excellent protection - the K6's protective capacity is 48% higher than that required by legislation. All this plus lightness like none other. The helmet's versatility comes from its aerodynamic shape that works well in any riding position. Four different shell sizes allow for a broad size range to better fit your particular head circumference and shape. Moisture wicking liners absorb sweat to keep you comfortable on extended rides. The AGV K6 Helmet is the culmination of all of AGV's road helmet technology to create a single helmet for all riders. 

Features:

• Carbon-aramid shell
• 4 shell sizes: XS-SM, MS, ML-LG, XL-2XL
• 5 density EPS in 4 sizes
• Collarbone safe profile
• 5 adjustable front vents
• 1 wide rear vent
• Shell shaped designed to reduce turbulence and optimized for all riding positions
• Ritmo and Shalimar fabric cheek pads
• Shalimar fabric head liner
• Abrasion and water resistance neck roll for extra durability
• 2Dry moisture wicking system
• Eyeglasses friendly fit
• Removable breath guard included
• K6 helmet specific 4mm thick, anti-scratch Pinlock-ready visor
• Pinlock lens insert included
• Innovative shield pivot reduces size and weight
• Double-D chinstrap
• DOT and ECE approved

The best helmet for any use, made from technologies developed for MotoGP™.

AGV fulfill all of your motorcycle helmet needs by harvesting the best characteristics from sport and touring helmets and infusing them into the AGV K6 Helmet. Its shell is comprised of carbon and aramid fibres for excellent protection - the K6's protective capacity is 48% higher than that required by legislation. All this plus lightness like none other. The helmet's versatility comes from its aerodynamic shape that works well in any riding position. Four different shell sizes allow for a broad size range to better fit your particular head circumference and shape. Moisture wicking liners absorb sweat to keep you comfortable on extended rides. The AGV K6 Helmet is the culmination of all of AGV's road helmet technology to create a single helmet for all riders. 

Features:

• Carbon-aramid shell
• 4 shell sizes: XS-SM, MS, ML-LG, XL-2XL
• 5 density EPS in 4 sizes
• Collarbone safe profile
• 5 adjustable front vents
• 1 wide rear vent
• Shell shaped designed to reduce turbulence and optimized for all riding positions
• Ritmo and Shalimar fabric cheek pads
• Shalimar fabric head liner
• Abrasion and water resistance neck roll for extra durability
• 2Dry moisture wicking system
• Eyeglasses friendly fit
• Removable breath guard included
• K6 helmet specific 4mm thick, anti-scratch Pinlock-ready visor
• Pinlock lens insert included
• Innovative shield pivot reduces size and weight
• Double-D chinstrap
• DOT and ECE approved

The AGV Pista GP RR Helmet is an exact replica of helmets worn by world championship racers. It meets stringent FIM Racing Homologation standards and provides the highest level of protection, even against glancing impacts that can cause rotational motion. Carbon fiber molded into an innovative shape lets the helmet move through air effortlessly. AGV's Integrated Ventilation System (IVS) uses 5 large front metal air vents and 2 rear extractors to let air pass through the helmet freely. Four shell sizes used across 7 different helmet sizes get a closer fitting shell compared to other helmets. The helmet was designed for an aggressive tucked racing position with a face shield allowing for a maximum vertical view and wide horizontal view. AGV's patented Visor Lock System (VLS) decreases the chance that the face shield comes opens in a crash. With a fit developed for MotoGP racers, the Pista GP RR's lining allows for an optimized fit and positioning on your head. Everything about the AGV Pista GP RR Helmet is designed for high speed track performance. 

Features:

• 100% Carbon Fiber Shell
• 4 Shell Sizes
• 5 Density EPS structure in 4 sizes
• Shell and EPS designed to minimize rotational accelerations per FIM regulations
• IVS (Integrated Ventilation System) ventilation with 5 large front metal air vents and 2 rear extractors hollowed in the shell
• Vents covers included
• Fully removable MotoGP developed integrated hydration system with internal channels engineered for smooth tube placement and drinking valve placed inside the chin of the helmet for a constant and smooth hydration during riding
• Class Optic 1 visor with 100% Max Vision Pinlock® (120) anti-fog technology is designed for maximum vertical view on racing position (85°) and unmatched horizontal view (190°) 
• Anti-scratch, tear-off ready Race 3 face shield (tear-off kit included)
• Visor thickness is from 4 to 5 mm, increasing face and eye protection
• Internal chin channels distribute the airflow evenly through the entire visor surface
• Patented Visor Lock System (VLS) reduces the risk of the face shield accidentally opening in case of a crash
• Exclusive metal visor mechanism in metal with roto-translation movement achieves total sealing between visor and shell
• Tool-free rapid visor release system allows the visor to be removed and replaced in seconds
• MotoGP-developed removable, washable interior padding
• Neck Roll made with 2-way stretch breathable fabric with Nabuk inserts
• Cheek pads made with soft Shalimar fabric with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented cheek pads safety release system, engineered to remove conveniently cheek pads in case of accident.
• Crown liner made with elastic microfiber with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented crown structure allows riders to optimize fit and select helmet height positioning on the top of the head
• Removable nose guard and wind protector
• Titanium Double D retention system

Modular helmet wearers, rejoice! The AGV Sport Modular Carbon Helmet is here and ready to lay down those miles with you. Built with the AGV Pista GP R in mind, the Sportmodular has the same protection and lightweight construction. The helmet liner is two-sided and reversible, so you can pick the best level of comfort depending on the weather. The GT3 visor is prepared for the Pinlock 120 insert lens, which is race-level anti-fogging at your fingertips. Metal hardware at the chin bar closes the bar securely. Swap out the visor effortlessly with no tool required.

FIT: The AGV Sportmodular Carbon Helmet fits tight around the jaw and cheek, not unlike a full-face sport helmet. We have found this helmet to run slightly small, please size up if between sizes.

Features:

• 100% carbon fibre shell
• 3 shell sizes (XS-SM, MD-LG, XL-3XL)
• 5-density EPS in 4 sizes
• 100% carbon fibre chin bar engineered to guarantee maximum lightweight and balance even in the open configuration
• Shell shape designed to minimize the risk of impact energies being channeled to the collar bone
• Metal chin guard opening system designed to prevent accidental openings
• IVS (Integrated Ventilation System) with a large front vent, a chin guard vent and a rear extractor hollowed in the shell which directs air to the rider’s head without interference with the internal sun shield
• Internal chin channels distribute the air flow evenly through the entire shield surface
• Adjustable integrated spoiler reduces turbulence and maximizes stability
• Pressure-free interior fit
• Removable nose guard and wind protector
• Reversible crown pad features a double face use that allows the rider to select the preferred feel and climate: warmer side with Shalimar fabric for a soft and gentle touch and a cooler side with Ritmo fabric
• Neck roll made from Shalimar and Nabuk fabric with water resistant treatment prevents water from being channeled inside the helmet
• Cheek pads made from Ritmo fabric with Sanitized (antibacterial protection), 2Dry (moisture wicking) and Microsense (premium skin comfort and wearing fluidity) treatments
• Eyeglasses friendly
• Face shield prepared for 100% Max Vision Pinlock (120) anti-fog technology designed for maximum vertical view (85°) and unmatched horizontal view (190°)
• Pinlock insert lens included
• GT3 visor is anti-scratch and is in 2 sizes to optimize the correct fit between visor and shell in any size and to reduce air drafts and noise
• Integrated anti-scratch inner sun shield is removable without using tools and uses 2 sizes
• Visor Lock System (VLS) reduces the risk of accidental openings
• Metal face shield mechanism designed to minimize surface area, therefore supporting peripheral view and impact performance
• Rapid visor release system requires no tools and allows it to be removed and replaced in seconds
• Titanium Double D retention system (43% lighter than standard steel DD)
• Internal sun shield in light smoke
• DOT/ECE

The best helmet for any use, made from technologies developed for MotoGP™.

AGV fulfill all of your motorcycle helmet needs by harvesting the best characteristics from sport and touring helmets and infusing them into the AGV K6 Helmet. Its shell is comprised of carbon and aramid fibres for excellent protection - the K6's protective capacity is 48% higher than that required by legislation. All this plus lightness like none other. The helmet's versatility comes from its aerodynamic shape that works well in any riding position. Four different shell sizes allow for a broad size range to better fit your particular head circumference and shape. Moisture wicking liners absorb sweat to keep you comfortable on extended rides. The AGV K6 Helmet is the culmination of all of AGV's road helmet technology to create a single helmet for all riders. 

Features:

• Carbon-aramid shell
• 4 shell sizes: XS-SM, MS, ML-LG, XL-2XL
• 5 density EPS in 4 sizes
• Collarbone safe profile
• 5 adjustable front vents
• 1 wide rear vent
• Shell shaped designed to reduce turbulence and optimized for all riding positions
• Ritmo and Shalimar fabric cheek pads
• Shalimar fabric head liner
• Abrasion and water resistance neck roll for extra durability
• 2Dry moisture wicking system
• Eyeglasses friendly fit
• Removable breath guard included
• K6 helmet specific 4mm thick, anti-scratch Pinlock-ready visor
• Pinlock lens insert included
• Innovative shield pivot reduces size and weight
• Double-D chinstrap
• DOT and ECE approved

The AGV K1 Helmet has an aerodynamic shape, ventilation scheme, and spoiler developed for the wind tunnel tested Corsa R and Pista GP R. The shell and spoiler provide aerodynamic stability at speed and the spoiler itself features a passive rear vent to extract warm air from the helmet as you ride. The K1 also incorporates the central air intake above the visor taken directly from MotoGP developed Pista GP R to provide best-in-class ventilation.

Features:

• HIR-TH (High Resistance Thermoplastic Resin) shell construction
• 2 shell sizes, 4 EPS sizes
• Integrated Ventilation System (IVS) was designed and optimized in a wind tunnel
• 5 front vents (3 at the forehead and 2 on the chin guard) and 2 rear extractors vents built into spoiler
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor is scratch-resistant and anti-fog polycarbonate with 100% UV protection and is offered in 2 sizes dependent on helmet size
  • GT 2-1 for helmet sizes XS, SM and MS and GT 2 for sizes ML, LG, XL and 2XL
• Micro-opening visor
• Fully removable and washable 3D inner liner and cheek pads are sanitized and made from Dry-Lex fabrics
• Helmet profile contoured around the base to reduce the risk of collar bone injuries
• Double-D ring chin strap
• DOT/ECE approved

The AGV AX-9 Carbon-Aramid Helmet is an all-new design over the popular AX-8 Dual EVO Helmet. It starts with an ultra-lightweight 100% carbon fibre shell and a redesigned peak for optimal aerodynamics. The peak itself is adjustable to reduce the sail effect at high speeds. Superior ventilation is achieved with 5 total vents: an adjustable chin-vent, two brow inlets and 2 extractors.  The design of this helmet also allows for four different configurations --  peak / visor, no peak / visor, peak / goggles, no peak / goggles -- meaning it can handle practically any riding scenario.

On the inside, the helmet has a fit to allow for comfort while wearing glasses and the padding is treated for optimal comfort. The cheek pads and top liner are moisture wicking and the neckroll is water resistant to prevent water from getting inside the helmet.

Features:

• Carbon-Aramid Fibreglass (SIBERIA MATT BLACK/YELLOW FLURO)
• Three shell sizes: XS-MS, ML-XL, 2XL
• Tool-less, removable chin vent guard
• Five vents: adjustable chin-vent, two brow inlets, 2 extractors
• Panoramic, Pinlock-ready visor 
• Adjustable peak to reduce sail effect
• Double-D strap
• Speaker pockets

The AGV K1 Helmet has an aerodynamic shape, ventilation scheme, and spoiler developed for the wind tunnel tested Corsa R and Pista GP R. The shell and spoiler provide aerodynamic stability at speed and the spoiler itself features a passive rear vent to extract warm air from the helmet as you ride. The K1 also incorporates the central air intake above the visor taken directly from MotoGP developed Pista GP R to provide best-in-class ventilation.

Features:

• HIR-TH (High Resistance Thermoplastic Resin) shell construction
• 2 shell sizes, 4 EPS sizes
• Integrated Ventilation System (IVS) was designed and optimized in a wind tunnel
• 5 front vents (3 at the forehead and 2 on the chin guard) and 2 rear extractors vents built into spoiler
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor is scratch-resistant and anti-fog polycarbonate with 100% UV protection and is offered in 2 sizes dependent on helmet size
  • GT 2-1 for helmet sizes XS, SM and MS and GT 2 for sizes ML, LG, XL and 2XL
• Micro-opening visor
• Fully removable and washable 3D inner liner and cheek pads are sanitized and made from Dry-Lex fabrics
• Helmet profile contoured around the base to reduce the risk of collar bone injuries
• Double-D ring chin strap
• DOT/ECE approved

The AGV Pista GP RR Helmet is an exact replica of helmets worn by world championship racers. It meets stringent FIM Racing Homologation standards and provides the highest level of protection, even against glancing impacts that can cause rotational motion. Carbon fiber molded into an innovative shape lets the helmet move through air effortlessly. AGV's Integrated Ventilation System (IVS) uses 5 large front metal air vents and 2 rear extractors to let air pass through the helmet freely. Four shell sizes used across 7 different helmet sizes get a closer fitting shell compared to other helmets. The helmet was designed for an aggressive tucked racing position with a face shield allowing for a maximum vertical view and wide horizontal view. AGV's patented Visor Lock System (VLS) decreases the chance that the face shield comes opens in a crash. With a fit developed for MotoGP racers, the Pista GP RR's lining allows for an optimized fit and positioning on your head. Everything about the AGV Pista GP RR Helmet is designed for high speed track performance.

Features:

• 100% Carbon Fiber Shell
• 4 Shell Sizes
• 5 Density EPS structure in 4 sizes
• Shell and EPS designed to minimize rotational accelerations per FIM regulations
• IVS (Integrated Ventilation System) ventilation with 5 large front metal air vents and 2 rear extractors hollowed in the shell
• Vents covers included
• Fully removable MotoGP developed integrated hydration system with internal channels engineered for smooth tube placement and drinking valve placed inside the chin of the helmet for a constant and smooth hydration during riding
• Class Optic 1 visor with 100% Max Vision Pinlock® (120) anti-fog technology is designed for maximum vertical view on racing position (85°) and unmatched horizontal view (190°) 
• Anti-scratch, tear-off ready Race 3 face shield (tear-off kit included)
• Visor thickness is from 4 to 5 mm, increasing face and eye protection
• Internal chin channels distribute the airflow evenly through the entire visor surface
• Patented Visor Lock System (VLS) reduces the risk of the face shield accidentally opening in case of a crash
• Exclusive metal visor mechanism in metal with roto-translation movement achieves total sealing between visor and shell
• Tool-free rapid visor release system allows the visor to be removed and replaced in seconds
• MotoGP-developed removable, washable interior padding
• Neck Roll made with 2-way stretch breathable fabric with Nabuk inserts
• Cheek pads made with soft Shalimar fabric with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented cheek pads safety release system, engineered to remove conveniently cheek pads in case of accident.
• Crown liner made with elastic microfiber with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented crown structure allows riders to optimize fit and select helmet height positioning on the top of the head
• Removable nose guard and wind protector
• Titanium Double D retention system

Concentration, strength and talent: The Spanish champion showed off all his qualities on the track in one of the most singular and hard-fought seasons in the history of the World Championship. And in his second appearance in the premier class, after winning the Moto3 world championship in 2017, he earned the title of MotoGP™ World Champion.

The PISTA GP RR MIR WORLD CHAMPION 2020 is the official replica of the helmet Joan wore on the lap of honor of the Valencian Community Grand Prix, which set the seal on his first MotoGP™ world title. There are fine details and the number 1 at the center of it all, for a champion with signature calm and control at each victory.

The AGV Pista GP RR Helmet is an exact replica of helmets worn by world championship racers. It meets stringent FIM Racing Homologation standards and provides the highest level of protection, even against glancing impacts that can cause rotational motion. Carbon fiber molded into an innovative shape lets the helmet move through air effortlessly. AGV's Integrated Ventilation System (IVS) uses 5 large front metal air vents and 2 rear extractors to let air pass through the helmet freely. Four shell sizes used across 7 different helmet sizes get a closer fitting shell compared to other helmets. The helmet was designed for an aggressive tucked racing position with a face shield allowing for a maximum vertical view and wide horizontal view. AGV's patented Visor Lock System (VLS) decreases the chance that the face shield comes opens in a crash. With a fit developed for MotoGP racers, the Pista GP RR's lining allows for an optimized fit and positioning on your head. Everything about the AGV Pista GP RR Helmet is designed for high speed track performance.

Features:

• 100% Carbon Fiber Shell
• 4 Shell Sizes
• 5 Density EPS structure in 4 sizes
• Shell and EPS designed to minimize rotational accelerations per FIM regulations
• IVS (Integrated Ventilation System) ventilation with 5 large front metal air vents and 2 rear extractors hollowed in the shell
• Vents covers included
• Fully removable MotoGP developed integrated hydration system with internal channels engineered for smooth tube placement and drinking valve placed inside the chin of the helmet for a constant and smooth hydration during riding
• Class Optic 1 visor with 100% Max Vision Pinlock® (120) anti-fog technology is designed for maximum vertical view on racing position (85°) and unmatched horizontal view (190°) 
• Anti-scratch, tear-off ready Race 3 face shield (tear-off kit included)
• Visor thickness is from 4 to 5 mm, increasing face and eye protection
• Internal chin channels distribute the airflow evenly through the entire visor surface
• Patented Visor Lock System (VLS) reduces the risk of the face shield accidentally opening in case of a crash
• Exclusive metal visor mechanism in metal with roto-translation movement achieves total sealing between visor and shell
• Tool-free rapid visor release system allows the visor to be removed and replaced in seconds
• MotoGP-developed removable, washable interior padding
• Neck Roll made with 2-way stretch breathable fabric with Nabuk inserts
• Cheek pads made with soft Shalimar fabric with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented cheek pads safety release system, engineered to remove conveniently cheek pads in case of accident.
• Crown liner made with elastic microfiber with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented crown structure allows riders to optimize fit and select helmet height positioning on the top of the head
• Removable nose guard and wind protector
• Titanium Double D retention system

Historic shapes and colours meet modern design. The Legends helmets immortalize riders and achievements that will never be forgotten. Comfort, protection and ventilation are key elements of these helmets that meet today's highest standards.

Relive the 70's with the style that dominated adventure riding, the AGV X101 Helmet. A fiberglass constructed shell protects riders on the outside while the suede fabric interior keeps heads comfortable. The chin guard air vent was constructed to include a metal grill preventing dirt and debris from entering the helmet while cool air flows through. This goggle ready helmet also features a removable peak and fully removable cheek pads and helmet liner that are machine washable.

Features:

• Fiberglass construction
• 3 shell sizes
• Chin guard air vent
• Metal grill under the chin vent protects against dirt and debris
• Removable peak 
• Goggles ready
• Double D ring chinstrap
• Eco-leather and suede fabric interior
• Fully removable and washable liner and cheek pads

The AGV Pista GP RR Helmet is an exact replica of helmets worn by world championship racers. It meets stringent FIM Racing Homologation standards and provides the highest level of protection, even against glancing impacts that can cause rotational motion. Carbon fiber molded into an innovative shape lets the helmet move through air effortlessly. AGV's Integrated Ventilation System (IVS) uses 5 large front metal air vents and 2 rear extractors to let air pass through the helmet freely. Four shell sizes used across 7 different helmet sizes get a closer fitting shell compared to other helmets. The helmet was designed for an aggressive tucked racing position with a face shield allowing for a maximum vertical view and wide horizontal view. AGV's patented Visor Lock System (VLS) decreases the chance that the face shield comes opens in a crash. With a fit developed for MotoGP racers, the Pista GP RR's lining allows for an optimized fit and positioning on your head. Everything about the AGV Pista GP RR Helmet is designed for high speed track performance. 

Features:

• 100% Carbon Fiber Shell
• 4 Shell Sizes
• 5 Density EPS structure in 4 sizes
• Shell and EPS designed to minimize rotational accelerations per FIM regulations
• IVS (Integrated Ventilation System) ventilation with 5 large front metal air vents and 2 rear extractors hollowed in the shell
• Vents covers included
• Fully removable MotoGP developed integrated hydration system with internal channels engineered for smooth tube placement and drinking valve placed inside the chin of the helmet for a constant and smooth hydration during riding
• Class Optic 1 visor with 100% Max Vision Pinlock® (120) anti-fog technology is designed for maximum vertical view on racing position (85°) and unmatched horizontal view (190°) 
• Anti-scratch, tear-off ready Race 3 face shield (tear-off kit included)
• Visor thickness is from 4 to 5 mm, increasing face and eye protection
• Internal chin channels distribute the airflow evenly through the entire visor surface
• Patented Visor Lock System (VLS) reduces the risk of the face shield accidentally opening in case of a crash
• Exclusive metal visor mechanism in metal with roto-translation movement achieves total sealing between visor and shell
• Tool-free rapid visor release system allows the visor to be removed and replaced in seconds
• MotoGP-developed removable, washable interior padding
• Neck Roll made with 2-way stretch breathable fabric with Nabuk inserts
• Cheek pads made with soft Shalimar fabric with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented cheek pads safety release system, engineered to remove conveniently cheek pads in case of accident.
• Crown liner made with elastic microfiber with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented crown structure allows riders to optimize fit and select helmet height positioning on the top of the head
• Removable nose guard and wind protector
• Titanium Double D retention system

The AGV Pista GP RR Helmet is an exact replica of helmets worn by world championship racers. It meets stringent FIM Racing Homologation standards and provides the highest level of protection, even against glancing impacts that can cause rotational motion. Carbon fiber molded into an innovative shape lets the helmet move through air effortlessly. AGV's Integrated Ventilation System (IVS) uses 5 large front metal air vents and 2 rear extractors to let air pass through the helmet freely. Four shell sizes used across 7 different helmet sizes get a closer fitting shell compared to other helmets. The helmet was designed for an aggressive tucked racing position with a face shield allowing for a maximum vertical view and wide horizontal view. AGV's patented Visor Lock System (VLS) decreases the chance that the face shield comes opens in a crash. With a fit developed for MotoGP racers, the Pista GP RR's lining allows for an optimized fit and positioning on your head. Everything about the AGV Pista GP RR Helmet is designed for high speed track performance. 

Features:

• 100% Carbon Fiber Shell
• 4 Shell Sizes
• 5 Density EPS structure in 4 sizes
• Shell and EPS designed to minimize rotational accelerations per FIM regulations
• IVS (Integrated Ventilation System) ventilation with 5 large front metal air vents and 2 rear extractors hollowed in the shell
• Vents covers included
• Fully removable MotoGP developed integrated hydration system with internal channels engineered for smooth tube placement and drinking valve placed inside the chin of the helmet for a constant and smooth hydration during riding
• Class Optic 1 visor with 100% Max Vision Pinlock® (120) anti-fog technology is designed for maximum vertical view on racing position (85°) and unmatched horizontal view (190°) 
• Anti-scratch, tear-off ready Race 3 face shield (tear-off kit included)
• Visor thickness is from 4 to 5 mm, increasing face and eye protection
• Internal chin channels distribute the airflow evenly through the entire visor surface
• Patented Visor Lock System (VLS) reduces the risk of the face shield accidentally opening in case of a crash
• Exclusive metal visor mechanism in metal with roto-translation movement achieves total sealing between visor and shell
• Tool-free rapid visor release system allows the visor to be removed and replaced in seconds
• MotoGP-developed removable, washable interior padding
• Neck Roll made with 2-way stretch breathable fabric with Nabuk inserts
• Cheek pads made with soft Shalimar fabric with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented cheek pads safety release system, engineered to remove conveniently cheek pads in case of accident.
• Crown liner made with elastic microfiber with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented crown structure allows riders to optimize fit and select helmet height positioning on the top of the head
• Removable nose guard and wind protector
• Titanium Double D retention system

Historic shapes and colours meet modern design. The Legends helmets immortalize riders and achievements that will never be forgotten. Comfort, protection and ventilation are key elements of these helmets that meet today's highest standards.

The AGV X3000 carries Agostini's signature and includes the contoured chin piece just as he liked it so that he could lean right up against the gas tank. It also features a dual button visor that can be opened with the left hand alone. While the exterior may look the same as it did in the 60's, the X3000 is packed with all the safety, ventilation and comfort you'd expect from a modern day AGV.

Features:

• ACF (Advanced Composite Fibre) fibreglass outer shell
• 3 shell sizes: XS-MS, ML-LG, XL-2XL
• Visor on/off air vent with channels hollowed in the shell
• Premium interior constructed of genuine leather and suede fabric with an embroidered logo
• Removable and washable interior (neck roll not removable)
• Double D-ring retention system

The AGV K1 Helmet has an aerodynamic shape, ventilation scheme, and spoiler developed for the wind tunnel tested Corsa R and Pista GP R. The shell and spoiler provide aerodynamic stability at speed and the spoiler itself features a passive rear vent to extract warm air from the helmet as you ride. The K1 also incorporates the central air intake above the visor taken directly from MotoGP developed Pista GP R to provide best-in-class ventilation.

Features:

• HIR-TH (High Resistance Thermoplastic Resin) shell construction
• 2 shell sizes, 4 EPS sizes
• Integrated Ventilation System (IVS) was designed and optimized in a wind tunnel
• 5 front vents (3 at the forehead and 2 on the chin guard) and 2 rear extractors vents built into spoiler
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor is scratch-resistant and anti-fog polycarbonate with 100% UV protection and is offered in 2 sizes dependent on helmet size
  • GT 2-1 for helmet sizes XS, SM and MS and GT 2 for sizes ML, LG, XL and 2XL
• Micro-opening visor
• Fully removable and washable 3D inner liner and cheek pads are sanitized and made from Dry-Lex fabrics
• Helmet profile contoured around the base to reduce the risk of collar bone injuries
• Double-D ring chin strap
• DOT/ECE approved

AGV’s latest version of this premium sport helmet now features a new construction for the inner liner, designed with high-performance fabrics and with no stitching in sensitive areas, making for an extremely comfortable fit.
The lightweight shell is made from a carbonfiberglass mix, while stability and aerodynamic performance are maximized thanks to an incorporated spoiler.
The Integrated Ventilation System (IVS) has vents that are hollowed into the shell, and there’s also an internal drop-down sun visor, a removable nose guard and a new wind protector that keeps noise to a minimum.

Features

• Shell in CAF (carbon-fiberglass)
• IVS (Integrated Ventilation System) with channels hollowed directly in the shell
• Double D retention system
• Sun visor
• Multi Density EPS
• The internal shape of the helmet was specifically designed to decrease the risk damage to the collar bones in the event of a fall
• Patented XQRS (Extra Quick Release System) visor mechanism in metal for very fast tool-free removal
• The visor is fitted with a patented micro-opening system
• Visor GT2 (ML-L-XL-XXL sizes) and GT2-1 (XS-S-MS sizes)
• Integrated spoiler
• Rear air extractors can be opened and closed
• Central air vent for optimal air flow
• Pinlock included in the box

Modular helmet wearers, rejoice! The AGV Sport Modular Carbon Helmet is here and ready to lay down those miles with you. Built with the AGV Pista GP R in mind, the Sportmodular has the same protection and lightweight construction. The helmet liner is two-sided and reversible, so you can pick the best level of comfort depending on the weather. The GT3 visor is prepared for the Pinlock 120 insert lens, which is race-level anti-fogging at your fingertips. Metal hardware at the chin bar closes the bar securely. Swap out the visor effortlessly with no tool required.

FIT: The AGV Sportmodular Carbon Helmet fits tight around the jaw and cheek, not unlike a full-face sport helmet. We have found this helmet to run slightly small, please size up if between sizes.

Features:

• 100% carbon fibre shell
• 3 shell sizes (XS-SM, MD-LG, XL-3XL)
• 5-density EPS in 4 sizes
• 100% carbon fibre chin bar engineered to guarantee maximum lightweight and balance even in the open configuration
• Shell shape designed to minimize the risk of impact energies being channeled to the collar bone
• Metal chin guard opening system designed to prevent accidental openings
• IVS (Integrated Ventilation System) with a large front vent, a chin guard vent and a rear extractor hollowed in the shell which directs air to the rider’s head without interference with the internal sun shield
• Internal chin channels distribute the air flow evenly through the entire shield surface
• Adjustable integrated spoiler reduces turbulence and maximizes stability
• Pressure-free interior fit
• Removable nose guard and wind protector
• Reversible crown pad features a double face use that allows the rider to select the preferred feel and climate: warmer side with Shalimar fabric for a soft and gentle touch and a cooler side with Ritmo fabric
• Neck roll made from Shalimar and Nabuk fabric with water resistant treatment prevents water from being channeled inside the helmet
• Cheek pads made from Ritmo fabric with Sanitized (antibacterial protection), 2Dry (moisture wicking) and Microsense (premium skin comfort and wearing fluidity) treatments
• Eyeglasses friendly
• Face shield prepared for 100% Max Vision Pinlock (120) anti-fog technology designed for maximum vertical view (85°) and unmatched horizontal view (190°)
• Pinlock insert lens included
• GT3 visor is anti-scratch and is in 2 sizes to optimize the correct fit between visor and shell in any size and to reduce air drafts and noise
• Integrated anti-scratch inner sun shield is removable without using tools and uses 2 sizes
• Visor Lock System (VLS) reduces the risk of accidental openings
• Metal face shield mechanism designed to minimize surface area, therefore supporting peripheral view and impact performance
• Rapid visor release system requires no tools and allows it to be removed and replaced in seconds
• Titanium Double D retention system (43% lighter than standard steel DD)
• Internal sun shield in light smoke
• DOT/ECE

The best helmet for any use, made from technologies developed for MotoGP™.

AGV fulfill all of your motorcycle helmet needs by harvesting the best characteristics from sport and touring helmets and infusing them into the AGV K6 Helmet. Its shell is comprised of carbon and aramid fibres for excellent protection - the K6's protective capacity is 48% higher than that required by legislation. All this plus lightness like none other. The helmet's versatility comes from its aerodynamic shape that works well in any riding position. Four different shell sizes allow for a broad size range to better fit your particular head circumference and shape. Moisture wicking liners absorb sweat to keep you comfortable on extended rides. The AGV K6 Helmet is the culmination of all of AGV's road helmet technology to create a single helmet for all riders. 

Features:

• Carbon-aramid shell
• 4 shell sizes: XS-SM, MS, ML-LG, XL-2XL
• 5 density EPS in 4 sizes
• Collarbone safe profile
• 5 adjustable front vents
• 1 wide rear vent
• Shell shaped designed to reduce turbulence and optimized for all riding positions
• Ritmo and Shalimar fabric cheek pads
• Shalimar fabric head liner
• Abrasion and water resistance neck roll for extra durability
• 2Dry moisture wicking system
• Eyeglasses friendly fit
• Removable breath guard included
• K6 helmet specific 4mm thick, anti-scratch Pinlock-ready visor
• Pinlock lens insert included
• Innovative shield pivot reduces size and weight
• Double-D chinstrap
• DOT and ECE approved

AGV’s latest version of this premium sport helmet now features a new construction for the inner liner, designed with high-performance fabrics and with no stitching in sensitive areas, making for an extremely comfortable fit.
The lightweight shell is made from a carbonfiberglass mix, while stability and aerodynamic performance are maximized thanks to an incorporated spoiler.
The Integrated Ventilation System (IVS) has vents that are hollowed into the shell, and there’s also an internal drop-down sun visor, a removable nose guard and a new wind protector that keeps noise to a minimum.

Features

• Shell in CAF (carbon-fiberglass)
• IVS (Integrated Ventilation System) with channels hollowed directly in the shell
• Double D retention system
• Sun visor
• Multi Density EPS
• The internal shape of the helmet was specifically designed to decrease the risk damage to the collar bones in the event of a fall
• Patented XQRS (Extra Quick Release System) visor mechanism in metal for very fast tool-free removal
• The visor is fitted with a patented micro-opening system
• Visor GT2 (ML-L-XL-XXL sizes) and GT2-1 (XS-S-MS sizes)
• Integrated spoiler
• Rear air extractors can be opened and closed
• Central air vent for optimal air flow
• Pinlock included in the box

AGV’s latest version of this premium sport helmet now features a new construction for the inner liner, designed with high-performance fabrics and with no stitching in sensitive areas, making for an extremely comfortable fit.
The lightweight shell is made from a carbonfiberglass mix, while stability and aerodynamic performance are maximized thanks to an incorporated spoiler.
The Integrated Ventilation System (IVS) has vents that are hollowed into the shell, and there’s also an internal drop-down sun visor, a removable nose guard and a new wind protector that keeps noise to a minimum.

Features

• Shell in CAF (carbon-fiberglass)
• IVS (Integrated Ventilation System) with channels hollowed directly in the shell
• Double D retention system
• Sun visor
• Multi Density EPS
• The internal shape of the helmet was specifically designed to decrease the risk damage to the collar bones in the event of a fall
• Patented XQRS (Extra Quick Release System) visor mechanism in metal for very fast tool-free removal
• The visor is fitted with a patented micro-opening system
• Visor GT2 (ML-L-XL-XXL sizes) and GT2-1 (XS-S-MS sizes)
• Integrated spoiler
• Rear air extractors can be opened and closed
• Central air vent for optimal air flow
• Pinlock included in the box

The K3 SV was developed from the experience AGV gained during the design process of the Pista GP and Corsa helmets. Thanks to the use of Finite Element Analysis (FEM), the technical department developed a benchmark product in terms of comfort, aerodynamics and safety. This helmet has a wide appeal and is suitable for young riders with a passion for racing as well as for more mature riders looking for comfort and high performance characteristics.

Thanks to CFD Analysis (Computational fluid dynamics), the special ventilation system provides maximum airflow to the head through two front and side vents, one central vent and two extractors at the back of the helmet.

The sanitized Dry-Comfort internal components can be removed for washing. The mechanism for opening and closing the visor has three customisable settings according to helmet use (Touring, Race and City) and features the XQRS system for quick removal.

The K-3 SV has been designed to accept the new genreation bluetooth communication systems.


Features:

• 2 sizes of HIR-TH shell (High Resistance Thermoplastic Resin)
• Inner shell in EPS in 4 sizes; shell and EPS dimensions optimised using the FEM (Finite Elements Analysis) system
• Homologation: ECE 2205, DOT, JIS, NBR, AS/NZS
• Ventilation system designed and optimised in a wind tunnel, comprising 4 front vents (3 at the front and one on the chin guard) and 2 rear extractors
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor mechanism with PVS system (Perimetrical Visor Seal) for improved seal and protection against draughts and noise thanks to the seat for the visor edge
• GT 2 scratch-resistant, anti-fog polycarbonate visor with 100% protection from UV rays
• Integrated removable Sun Visor (ISV) with scratch-resistant visor with tool-free replacement system
• Removable breath deflector
• Removable windproof chin strap protection
• Fully removable and washable 3D inner liners
• Sanitised Dry-Comfort fabrics
• Micrometrically adjustable strap retention system
• Anti-theft ring on strap

The K3 SV was developed from the experience AGV gained during the design process of the Pista GP and Corsa helmets. Thanks to the use of Finite Element Analysis (FEM), the technical department developed a benchmark product in terms of comfort, aerodynamics and safety. This helmet has a wide appeal and is suitable for young riders with a passion for racing as well as for more mature riders looking for comfort and high performance characteristics.

Thanks to CFD Analysis (Computational fluid dynamics), the special ventilation system provides maximum airflow to the head through two front and side vents, one central vent and two extractors at the back of the helmet.

The sanitized Dry-Comfort internal components can be removed for washing. The mechanism for opening and closing the visor has three customisable settings according to helmet use (Touring, Race and City) and features the XQRS system for quick removal.

The K-3 SV has been designed to accept the new genreation bluetooth communication systems.


Features:

• 2 sizes of HIR-TH shell (High Resistance Thermoplastic Resin)
• Inner shell in EPS in 4 sizes; shell and EPS dimensions optimised using the FEM (Finite Elements Analysis) system
• Homologation: ECE 2205, DOT, JIS, NBR, AS/NZS
• Ventilation system designed and optimised in a wind tunnel, comprising 4 front vents (3 at the front and one on the chin guard) and 2 rear extractors
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor mechanism with PVS system (Perimetrical Visor Seal) for improved seal and protection against draughts and noise thanks to the seat for the visor edge
• GT 2 scratch-resistant, anti-fog polycarbonate visor with 100% protection from UV rays
• Integrated removable Sun Visor (ISV) with scratch-resistant visor with tool-free replacement system
• Removable breath deflector
• Removable windproof chin strap protection
• Fully removable and washable 3D inner liners
• Sanitised Dry-Comfort fabrics
• Micrometrically adjustable strap retention system
• Anti-theft ring on strap

The K3 SV was developed from the experience AGV gained during the design process of the Pista GP and Corsa helmets. Thanks to the use of Finite Element Analysis (FEM), the technical department developed a benchmark product in terms of comfort, aerodynamics and safety. This helmet has a wide appeal and is suitable for young riders with a passion for racing as well as for more mature riders looking for comfort and high performance characteristics.

Thanks to CFD Analysis (Computational fluid dynamics), the special ventilation system provides maximum airflow to the head through two front and side vents, one central vent and two extractors at the back of the helmet.

The sanitized Dry-Comfort internal components can be removed for washing. The mechanism for opening and closing the visor has three customisable settings according to helmet use (Touring, Race and City) and features the XQRS system for quick removal.

The K-3 SV has been designed to accept the new genreation bluetooth communication systems.


Features:

• 2 sizes of HIR-TH shell (High Resistance Thermoplastic Resin)
• Inner shell in EPS in 4 sizes; shell and EPS dimensions optimised using the FEM (Finite Elements Analysis) system
• Homologation: ECE 2205, DOT, JIS, NBR, AS/NZS
• Ventilation system designed and optimised in a wind tunnel, comprising 4 front vents (3 at the front and one on the chin guard) and 2 rear extractors
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor mechanism with PVS system (Perimetrical Visor Seal) for improved seal and protection against draughts and noise thanks to the seat for the visor edge
• GT 2 scratch-resistant, anti-fog polycarbonate visor with 100% protection from UV rays
• Integrated removable Sun Visor (ISV) with scratch-resistant visor with tool-free replacement system
• Removable breath deflector
• Removable windproof chin strap protection
• Fully removable and washable 3D inner liners
• Sanitised Dry-Comfort fabrics
• Micrometrically adjustable strap retention system
• Anti-theft ring on strap

The AGV K1 Helmet has an aerodynamic shape, ventilation scheme, and spoiler developed for the wind tunnel tested Corsa R and Pista GP R. The shell and spoiler provide aerodynamic stability at speed and the spoiler itself features a passive rear vent to extract warm air from the helmet as you ride. The K1 also incorporates the central air intake above the visor taken directly from MotoGP developed Pista GP R to provide best-in-class ventilation.

Features:

• HIR-TH (High Resistance Thermoplastic Resin) shell construction
• 2 shell sizes, 4 EPS sizes
• Integrated Ventilation System (IVS) was designed and optimized in a wind tunnel
• 5 front vents (3 at the forehead and 2 on the chin guard) and 2 rear extractors vents built into spoiler
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor is scratch-resistant and anti-fog polycarbonate with 100% UV protection and is offered in 2 sizes dependent on helmet size
  • GT 2-1 for helmet sizes XS, SM and MS and GT 2 for sizes ML, LG, XL and 2XL
• Micro-opening visor
• Fully removable and washable 3D inner liner and cheek pads are sanitized and made from Dry-Lex fabrics
• Helmet profile contoured around the base to reduce the risk of collar bone injuries
• Double-D ring chin strap
• DOT/ECE approved

The AGV K1 Helmet has an aerodynamic shape, ventilation scheme, and spoiler developed for the wind tunnel tested Corsa R and Pista GP R. The shell and spoiler provide aerodynamic stability at speed and the spoiler itself features a passive rear vent to extract warm air from the helmet as you ride. The K1 also incorporates the central air intake above the visor taken directly from MotoGP developed Pista GP R to provide best-in-class ventilation.

Features:

• HIR-TH (High Resistance Thermoplastic Resin) shell construction
• 2 shell sizes, 4 EPS sizes
• Integrated Ventilation System (IVS) was designed and optimized in a wind tunnel
• 5 front vents (3 at the forehead and 2 on the chin guard) and 2 rear extractors vents built into spoiler
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor is scratch-resistant and anti-fog polycarbonate with 100% UV protection and is offered in 2 sizes dependent on helmet size
  • GT 2-1 for helmet sizes XS, SM and MS and GT 2 for sizes ML, LG, XL and 2XL
• Micro-opening visor
• Fully removable and washable 3D inner liner and cheek pads are sanitized and made from Dry-Lex fabrics
• Helmet profile contoured around the base to reduce the risk of collar bone injuries
• Double-D ring chin strap
• DOT/ECE approved

The AGV K1 Helmet has an aerodynamic shape, ventilation scheme, and spoiler developed for the wind tunnel tested Corsa R and Pista GP R. The shell and spoiler provide aerodynamic stability at speed and the spoiler itself features a passive rear vent to extract warm air from the helmet as you ride. The K1 also incorporates the central air intake above the visor taken directly from MotoGP developed Pista GP R to provide best-in-class ventilation.

Features:

• HIR-TH (High Resistance Thermoplastic Resin) shell construction
• 2 shell sizes, 4 EPS sizes
• Integrated Ventilation System (IVS) was designed and optimized in a wind tunnel
• 5 front vents (3 at the forehead and 2 on the chin guard) and 2 rear extractors vents built into spoiler
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor is scratch-resistant and anti-fog polycarbonate with 100% UV protection and is offered in 2 sizes dependent on helmet size
  • GT 2-1 for helmet sizes XS, SM and MS and GT 2 for sizes ML, LG, XL and 2XL
• Micro-opening visor
• Fully removable and washable 3D inner liner and cheek pads are sanitized and made from Dry-Lex fabrics
• Helmet profile contoured around the base to reduce the risk of collar bone injuries
• Double-D ring chin strap
• DOT/ECE approved

The AGV K1 Helmet has an aerodynamic shape, ventilation scheme, and spoiler developed for the wind tunnel tested Corsa R and Pista GP R. The shell and spoiler provide aerodynamic stability at speed and the spoiler itself features a passive rear vent to extract warm air from the helmet as you ride. The K1 also incorporates the central air intake above the visor taken directly from MotoGP developed Pista GP R to provide best-in-class ventilation.

Features:

• HIR-TH (High Resistance Thermoplastic Resin) shell construction
• 2 shell sizes, 4 EPS sizes
• Integrated Ventilation System (IVS) was designed and optimized in a wind tunnel
• 5 front vents (3 at the forehead and 2 on the chin guard) and 2 rear extractors vents built into spoiler
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor is scratch-resistant and anti-fog polycarbonate with 100% UV protection and is offered in 2 sizes dependent on helmet size
  • GT 2-1 for helmet sizes XS, SM and MS and GT 2 for sizes ML, LG, XL and 2XL
• Micro-opening visor
• Fully removable and washable 3D inner liner and cheek pads are sanitized and made from Dry-Lex fabrics
• Helmet profile contoured around the base to reduce the risk of collar bone injuries
• Double-D ring chin strap
• DOT/ECE approved

The best helmet for any use, made from technologies developed for MotoGP™.

AGV fulfill all of your motorcycle helmet needs by harvesting the best characteristics from sport and touring helmets and infusing them into the AGV K6 Helmet. Its shell is comprised of carbon and aramid fibres for excellent protection - the K6's protective capacity is 48% higher than that required by legislation. All this plus lightness like none other. The helmet's versatility comes from its aerodynamic shape that works well in any riding position. Four different shell sizes allow for a broad size range to better fit your particular head circumference and shape. Moisture wicking liners absorb sweat to keep you comfortable on extended rides. The AGV K6 Helmet is the culmination of all of AGV's road helmet technology to create a single helmet for all riders. 

Features:

• Carbon-aramid shell
• 4 shell sizes: XS-SM, MS, ML-LG, XL-2XL
• 5 density EPS in 4 sizes
• Collarbone safe profile
• 5 adjustable front vents
• 1 wide rear vent
• Shell shaped designed to reduce turbulence and optimized for all riding positions
• Ritmo and Shalimar fabric cheek pads
• Shalimar fabric head liner
• Abrasion and water resistance neck roll for extra durability
• 2Dry moisture wicking system
• Eyeglasses friendly fit
• Removable breath guard included
• K6 helmet specific 4mm thick, anti-scratch Pinlock-ready visor
• Pinlock lens insert included
• Innovative shield pivot reduces size and weight
• Double-D chinstrap
• DOT and ECE approved

The AGV Pista GP RR Helmet is an exact replica of helmets worn by world championship racers. It meets stringent FIM Racing Homologation standards and provides the highest level of protection, even against glancing impacts that can cause rotational motion. Carbon fiber molded into an innovative shape lets the helmet move through air effortlessly. AGV's Integrated Ventilation System (IVS) uses 5 large front metal air vents and 2 rear extractors to let air pass through the helmet freely. Four shell sizes used across 7 different helmet sizes get a closer fitting shell compared to other helmets. The helmet was designed for an aggressive tucked racing position with a face shield allowing for a maximum vertical view and wide horizontal view. AGV's patented Visor Lock System (VLS) decreases the chance that the face shield comes opens in a crash. With a fit developed for MotoGP racers, the Pista GP RR's lining allows for an optimized fit and positioning on your head. Everything about the AGV Pista GP RR Helmet is designed for high speed track performance. 

Features:

• 100% Carbon Fiber Shell
• 4 Shell Sizes
• 5 Density EPS structure in 4 sizes
• Shell and EPS designed to minimize rotational accelerations per FIM regulations
• IVS (Integrated Ventilation System) ventilation with 5 large front metal air vents and 2 rear extractors hollowed in the shell
• Vents covers included
• Fully removable MotoGP developed integrated hydration system with internal channels engineered for smooth tube placement and drinking valve placed inside the chin of the helmet for a constant and smooth hydration during riding
• Class Optic 1 visor with 100% Max Vision Pinlock® (120) anti-fog technology is designed for maximum vertical view on racing position (85°) and unmatched horizontal view (190°) 
• Anti-scratch, tear-off ready Race 3 face shield (tear-off kit included)
• Visor thickness is from 4 to 5 mm, increasing face and eye protection
• Internal chin channels distribute the airflow evenly through the entire visor surface
• Patented Visor Lock System (VLS) reduces the risk of the face shield accidentally opening in case of a crash
• Exclusive metal visor mechanism in metal with roto-translation movement achieves total sealing between visor and shell
• Tool-free rapid visor release system allows the visor to be removed and replaced in seconds
• MotoGP-developed removable, washable interior padding
• Neck Roll made with 2-way stretch breathable fabric with Nabuk inserts
• Cheek pads made with soft Shalimar fabric with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented cheek pads safety release system, engineered to remove conveniently cheek pads in case of accident.
• Crown liner made with elastic microfiber with Sanitized antibacterial protection, 2Dry moisture wicking and Microsense treatment
• Patented crown structure allows riders to optimize fit and select helmet height positioning on the top of the head
• Removable nose guard and wind protector
• Titanium Double D retention system

The ultra-protective, comfortable and lightweight modular helmet, with integrated DMC communication system.

Tourmodular is the modular helmet designed to take on long journeys in the utmost comfort and with the highest possible level of safety, homologated according to the stringent ECE2206 regulations.

Safety starts from the shell in carbon, aramid fiber and fiberglass that allows the highest level of protection and lightness, so it can be worn for thousands of kilometers.

Every detail is designed for protecting and giving tourers the utmost confidence in the saddle. The visor mechanisms are metal and miniaturized, to maximize the protection coverage area and expand the field of vision. The visor is up to 4 mm thick, more than twice the thickness of the average visor. It’s a shield, an integral part of the helmet’s protection system.

AGV Tourmodular is the helmet subjected to the most testing in AGV’s 75-year history, and is designed to take on endless journeys in complete comfort in all weather. It’s durable and reliable.
The soft Ritmo and Shalimar fabric interiors, with personalized fit system, ensure that moisture and sweat are absorbed immediately. Waterproof synthetic leather piping keeps water out of the helmet interior on the rainiest of days. The AGV Micro-opening system allows you to keep the visor open for airflow while keeping it securely attached to the chinguard.

The helmet features four large adjustable air vents, on the top and on the chin, and 16 internal air extraction channels, to allow maximum modularity in ventilation and perfect air circulation in all conditions.
AGV Tourmodular is developed to cut through the air, minimizing turbulence and helmet movement even at high speeds. This aerodynamic study derives from AGV’s experience in the most extreme competitive environments, like MotoGP™, which helps minimize fatigue on the rider’s neck and shoulders. At 130 km/h, cruising speed in highway travel, it has a dynamic weight of zero.
The aerodynamics of the helmet are optimized even in open configuration. AGV Tourmodular can be used with the chinguard up in complete safety even on the move, exceeding the standards required by specific P/J homologation.

AGV Tourmodular is the first modular helmet set up for the integrated communication system with DMC technology, the highest standard of wireless communication for motorcycle riders.

The AGV INSYDE Intercom system, developed with Cardo, allows simple and seamless connection with communication between 15 riders at once, with superior audio quality and a total range of up to 6 km.

AGV Ultravision standards ensure total control on the road, allowing a 190° horizontal and 85° vertical field of vision, values similar to the field of vision of the human eye, allowing riders to see the road and surrounding obstacles sooner and more clearly. The visor, the removable sun visor and the antifog Max Pinlock 120 system allow for complete visibility in all conditions. All of this benefits safety and concentration.

AGV Tourmodular is the perfect helmet for taking on any trip, with the maximum possible safety.

Accessories Included:

• Tool for installing INSYDE communication system (sold separately)
• Wind protector

Aerodynamics:

• 2-step chin guard mechanism designed to optimize aerodynamics in jet configuration
• Shell shape designed to maximize aerodynamic performance and to have 0 dynamic weight at 130km/h (80 mph)

Homologation:

• Double homologation P/J

Interiors:

• Cheek pads: fresh and fluid Ritmo fabric
• Crown pad: Shalimar fabric for a soft and gentle touch
• DrySpeed: instant sweat absorption
• Embracing neck roll profile
• Fit especially designed to allow wearing glasses
• Microsense: premium skin comfort
• Neckroll: Ritmo fabric and synthetic leather with high abrasion resistance and water-resistant properties
• New patented cheek pads interchangeable between all sizes
• Ready for AGV INSYDE communication system
• Reflective inserts
• Removable and washable interiors
• Removable nose guard
• Removable wind protector

Retention System:

• Steel micrometric

Shell:

• 3 shell sizes
• 5-density EPS developed in 4 sizes
• Carbon-Aramid-Fiberglass
• Chin guard opening system designed to prevent accidental opening
• Collarbone safe profile
• Metal chin guard block system ensures the double homologation P/J

Ventilation:

• 1 rear extractor
• 4 front vents
• Adjustable air vents

Visor:

• 100% Max Vision Pinlock (120) included
• 190° horizontal field of view
• 85° vertical field of view
• Anti-scratch
• Integrated anti-scratch sun visor, removable without using tools
• Metal visor mechanism
• Micro-opening system
• Multistep visor mechanism
• Optic class 1
• Patented Extra Quick Release System
• Patented visor lock system

Weight:

• 1.620 g in first shell size

The ultra-protective, comfortable and lightweight modular helmet, with integrated DMC communication system.

Tourmodular is the modular helmet designed to take on long journeys in the utmost comfort and with the highest possible level of safety, homologated according to the stringent ECE2206 regulations.

Safety starts from the shell in carbon, aramid fiber and fiberglass that allows the highest level of protection and lightness, so it can be worn for thousands of kilometers.

Every detail is designed for protecting and giving tourers the utmost confidence in the saddle. The visor mechanisms are metal and miniaturized, to maximize the protection coverage area and expand the field of vision. The visor is up to 4 mm thick, more than twice the thickness of the average visor. It’s a shield, an integral part of the helmet’s protection system.

AGV Tourmodular is the helmet subjected to the most testing in AGV’s 75-year history, and is designed to take on endless journeys in complete comfort in all weather. It’s durable and reliable.
The soft Ritmo and Shalimar fabric interiors, with personalized fit system, ensure that moisture and sweat are absorbed immediately. Waterproof synthetic leather piping keeps water out of the helmet interior on the rainiest of days. The AGV Micro-opening system allows you to keep the visor open for airflow while keeping it securely attached to the chinguard.

The helmet features four large adjustable air vents, on the top and on the chin, and 16 internal air extraction channels, to allow maximum modularity in ventilation and perfect air circulation in all conditions.
AGV Tourmodular is developed to cut through the air, minimizing turbulence and helmet movement even at high speeds. This aerodynamic study derives from AGV’s experience in the most extreme competitive environments, like MotoGP™, which helps minimize fatigue on the rider’s neck and shoulders. At 130 km/h, cruising speed in highway travel, it has a dynamic weight of zero.
The aerodynamics of the helmet are optimized even in open configuration. AGV Tourmodular can be used with the chinguard up in complete safety even on the move, exceeding the standards required by specific P/J homologation.

AGV Tourmodular is the first modular helmet set up for the integrated communication system with DMC technology, the highest standard of wireless communication for motorcycle riders.

The AGV INSYDE Intercom system, developed with Cardo, allows simple and seamless connection with communication between 15 riders at once, with superior audio quality and a total range of up to 6 km.

AGV Ultravision standards ensure total control on the road, allowing a 190° horizontal and 85° vertical field of vision, values similar to the field of vision of the human eye, allowing riders to see the road and surrounding obstacles sooner and more clearly. The visor, the removable sun visor and the antifog Max Pinlock 120 system allow for complete visibility in all conditions. All of this benefits safety and concentration.

AGV Tourmodular is the perfect helmet for taking on any trip, with the maximum possible safety.

Accessories Included:

• Tool for installing INSYDE communication system (sold separately)
• Wind protector

Aerodynamics:

• 2-step chin guard mechanism designed to optimize aerodynamics in jet configuration
• Shell shape designed to maximize aerodynamic performance and to have 0 dynamic weight at 130km/h (80 mph)

Homologation:

• Double homologation P/J

Interiors:

• Cheek pads: fresh and fluid Ritmo fabric
• Crown pad: Shalimar fabric for a soft and gentle touch
• DrySpeed: instant sweat absorption
• Embracing neck roll profile
• Fit especially designed to allow wearing glasses
• Microsense: premium skin comfort
• Neckroll: Ritmo fabric and synthetic leather with high abrasion resistance and water-resistant properties
• New patented cheek pads interchangeable between all sizes
• Ready for AGV INSYDE communication system
• Reflective inserts
• Removable and washable interiors
• Removable nose guard
• Removable wind protector

Retention System:

• Steel micrometric

Shell:

• 3 shell sizes
• 5-density EPS developed in 4 sizes
• Carbon-Aramid-Fiberglass
• Chin guard opening system designed to prevent accidental opening
• Collarbone safe profile
• Metal chin guard block system ensures the double homologation P/J

Ventilation:

• 1 rear extractor
• 4 front vents
• Adjustable air vents

Visor:

• 100% Max Vision Pinlock (120) included
• 190° horizontal field of view
• 85° vertical field of view
• Anti-scratch
• Integrated anti-scratch sun visor, removable without using tools
• Metal visor mechanism
• Micro-opening system
• Multistep visor mechanism
• Optic class 1
• Patented Extra Quick Release System
• Patented visor lock system

Weight:

• 1.620 g in first shell size

The ultra-protective, comfortable and lightweight modular helmet, with integrated DMC communication system.

Tourmodular is the modular helmet designed to take on long journeys in the utmost comfort and with the highest possible level of safety, homologated according to the stringent ECE2206 regulations.

Safety starts from the shell in carbon, aramid fiber and fiberglass that allows the highest level of protection and lightness, so it can be worn for thousands of kilometers.

Every detail is designed for protecting and giving tourers the utmost confidence in the saddle. The visor mechanisms are metal and miniaturized, to maximize the protection coverage area and expand the field of vision. The visor is up to 4 mm thick, more than twice the thickness of the average visor. It’s a shield, an integral part of the helmet’s protection system.

AGV Tourmodular is the helmet subjected to the most testing in AGV’s 75-year history, and is designed to take on endless journeys in complete comfort in all weather. It’s durable and reliable.
The soft Ritmo and Shalimar fabric interiors, with personalized fit system, ensure that moisture and sweat are absorbed immediately. Waterproof synthetic leather piping keeps water out of the helmet interior on the rainiest of days. The AGV Micro-opening system allows you to keep the visor open for airflow while keeping it securely attached to the chinguard.

The helmet features four large adjustable air vents, on the top and on the chin, and 16 internal air extraction channels, to allow maximum modularity in ventilation and perfect air circulation in all conditions.
AGV Tourmodular is developed to cut through the air, minimizing turbulence and helmet movement even at high speeds. This aerodynamic study derives from AGV’s experience in the most extreme competitive environments, like MotoGP™, which helps minimize fatigue on the rider’s neck and shoulders. At 130 km/h, cruising speed in highway travel, it has a dynamic weight of zero.
The aerodynamics of the helmet are optimized even in open configuration. AGV Tourmodular can be used with the chinguard up in complete safety even on the move, exceeding the standards required by specific P/J homologation.

AGV Tourmodular is the first modular helmet set up for the integrated communication system with DMC technology, the highest standard of wireless communication for motorcycle riders.

The AGV INSYDE Intercom system, developed with Cardo, allows simple and seamless connection with communication between 15 riders at once, with superior audio quality and a total range of up to 6 km.

AGV Ultravision standards ensure total control on the road, allowing a 190° horizontal and 85° vertical field of vision, values similar to the field of vision of the human eye, allowing riders to see the road and surrounding obstacles sooner and more clearly. The visor, the removable sun visor and the antifog Max Pinlock 120 system allow for complete visibility in all conditions. All of this benefits safety and concentration.

AGV Tourmodular is the perfect helmet for taking on any trip, with the maximum possible safety.

Accessories Included:

• Tool for installing INSYDE communication system (sold separately)
• Wind protector

Aerodynamics:

• 2-step chin guard mechanism designed to optimize aerodynamics in jet configuration
• Shell shape designed to maximize aerodynamic performance and to have 0 dynamic weight at 130km/h (80 mph)

Homologation:

• Double homologation P/J

Interiors:

• Cheek pads: fresh and fluid Ritmo fabric
• Crown pad: Shalimar fabric for a soft and gentle touch
• DrySpeed: instant sweat absorption
• Embracing neck roll profile
• Fit especially designed to allow wearing glasses
• Microsense: premium skin comfort
• Neckroll: Ritmo fabric and synthetic leather with high abrasion resistance and water-resistant properties
• New patented cheek pads interchangeable between all sizes
• Ready for AGV INSYDE communication system
• Reflective inserts
• Removable and washable interiors
• Removable nose guard
• Removable wind protector

Retention System:

• Steel micrometric

Shell:

• 3 shell sizes
• 5-density EPS developed in 4 sizes
• Carbon-Aramid-Fiberglass
• Chin guard opening system designed to prevent accidental opening
• Collarbone safe profile
• Metal chin guard block system ensures the double homologation P/J

Ventilation:

• 1 rear extractor
• 4 front vents
• Adjustable air vents

Visor:

• 100% Max Vision Pinlock (120) included
• 190° horizontal field of view
• 85° vertical field of view
• Anti-scratch
• Integrated anti-scratch sun visor, removable without using tools
• Metal visor mechanism
• Micro-opening system
• Multistep visor mechanism
• Optic class 1
• Patented Extra Quick Release System
• Patented visor lock system

Weight:

• 1.620 g in first shell size

The ultra-protective, comfortable and lightweight modular helmet, with integrated DMC communication system.

Tourmodular is the modular helmet designed to take on long journeys in the utmost comfort and with the highest possible level of safety, homologated according to the stringent ECE2206 regulations.

Safety starts from the shell in carbon, aramid fiber and fiberglass that allows the highest level of protection and lightness, so it can be worn for thousands of kilometers.

Every detail is designed for protecting and giving tourers the utmost confidence in the saddle. The visor mechanisms are metal and miniaturized, to maximize the protection coverage area and expand the field of vision. The visor is up to 4 mm thick, more than twice the thickness of the average visor. It’s a shield, an integral part of the helmet’s protection system.

AGV Tourmodular is the helmet subjected to the most testing in AGV’s 75-year history, and is designed to take on endless journeys in complete comfort in all weather. It’s durable and reliable.
The soft Ritmo and Shalimar fabric interiors, with personalized fit system, ensure that moisture and sweat are absorbed immediately. Waterproof synthetic leather piping keeps water out of the helmet interior on the rainiest of days. The AGV Micro-opening system allows you to keep the visor open for airflow while keeping it securely attached to the chinguard.

The helmet features four large adjustable air vents, on the top and on the chin, and 16 internal air extraction channels, to allow maximum modularity in ventilation and perfect air circulation in all conditions.
AGV Tourmodular is developed to cut through the air, minimizing turbulence and helmet movement even at high speeds. This aerodynamic study derives from AGV’s experience in the most extreme competitive environments, like MotoGP™, which helps minimize fatigue on the rider’s neck and shoulders. At 130 km/h, cruising speed in highway travel, it has a dynamic weight of zero.
The aerodynamics of the helmet are optimized even in open configuration. AGV Tourmodular can be used with the chinguard up in complete safety even on the move, exceeding the standards required by specific P/J homologation.

AGV Tourmodular is the first modular helmet set up for the integrated communication system with DMC technology, the highest standard of wireless communication for motorcycle riders.

The AGV INSYDE Intercom system, developed with Cardo, allows simple and seamless connection with communication between 15 riders at once, with superior audio quality and a total range of up to 6 km.

AGV Ultravision standards ensure total control on the road, allowing a 190° horizontal and 85° vertical field of vision, values similar to the field of vision of the human eye, allowing riders to see the road and surrounding obstacles sooner and more clearly. The visor, the removable sun visor and the antifog Max Pinlock 120 system allow for complete visibility in all conditions. All of this benefits safety and concentration.

AGV Tourmodular is the perfect helmet for taking on any trip, with the maximum possible safety.

Accessories Included:

• Tool for installing INSYDE communication system (sold separately)
• Wind protector

Aerodynamics:

• 2-step chin guard mechanism designed to optimize aerodynamics in jet configuration
• Shell shape designed to maximize aerodynamic performance and to have 0 dynamic weight at 130km/h (80 mph)

Homologation:

• Double homologation P/J

Interiors:

• Cheek pads: fresh and fluid Ritmo fabric
• Crown pad: Shalimar fabric for a soft and gentle touch
• DrySpeed: instant sweat absorption
• Embracing neck roll profile
• Fit especially designed to allow wearing glasses
• Microsense: premium skin comfort
• Neckroll: Ritmo fabric and synthetic leather with high abrasion resistance and water-resistant properties
• New patented cheek pads interchangeable between all sizes
• Ready for AGV INSYDE communication system
• Reflective inserts
• Removable and washable interiors
• Removable nose guard
• Removable wind protector

Retention System:

• Steel micrometric

Shell:

• 3 shell sizes
• 5-density EPS developed in 4 sizes
• Carbon-Aramid-Fiberglass
• Chin guard opening system designed to prevent accidental opening
• Collarbone safe profile
• Metal chin guard block system ensures the double homologation P/J

Ventilation:

• 1 rear extractor
• 4 front vents
• Adjustable air vents

Visor:

• 100% Max Vision Pinlock (120) included
• 190° horizontal field of view
• 85° vertical field of view
• Anti-scratch
• Integrated anti-scratch sun visor, removable without using tools
• Metal visor mechanism
• Micro-opening system
• Multistep visor mechanism
• Optic class 1
• Patented Extra Quick Release System
• Patented visor lock system

Weight:

• 1.620 g in first shell size