Road Parts

Our BF307+ high performance Super DOT 4 brake fluid has been specially formulated to provide outstanding performance for braking systems routinely operated at extreme temperatures making this fluid ideal for fast street use, track days and racing. Do not mix BF307+ brake fluid with other brake fluids or its high performance may be compromised.

Typical dry boiling point – 310°C (590°F). Typical wet boiling point – 204°C (399°F)

NOT SUITABLE FOR USE WITH MINERAL OIL SYSTEMS. If in doubt consult vehicle handbook.

EBC DOT 4 brake fluid is a high quality brake fluid recommended for use in the hydraulic brake and clutch systems of all motorcycles and cars for which a glycol based DOT 3 or DOT 4 fluid is specified. With a higher boiling point than DOT 3 fluid, this fluid is ideally suited for higher performance vehicles where the braking system routinely reaches moderate brake temperatures.

Typical dry boiling point – 270°C (518°F). Typical wet boiling point – 170°C (338°F)

NOT SUITABLE FOR USE WITH MINERAL OIL SYSTEMS. If in doubt consult vehicle handbook.

EBC DOT 5 silicone brake fluid is a very high specification fluid based on polydimethylsiloxanes (silicones) and offers many advantages over conventional glycol based fluids. Silicone fluid does not absorb water from the surrounding atmosphere while in service and therefore offers greatly extended service life whilst improving corrosion resistance of the main components of the braking system.

Recommended for use in the hydraulic brake and clutch systems of all motorcycles and cars for which non-petroleum based fluid is specified. Particularly recommended for classic cars or vehicles that are garaged for much of their life but must be usable at short notice.

This fluid must only ever be mixed with DOT 5 fluid which has the same silicone base. Never mix DOT 5 with regular glycol based fluids.

Typical dry boiling point – 300°C (572°F). Typical wet boiling point – 180°C (356°F)

Dot 4 LV is a brake fluid engineered to operate exceptionally well at low temperatures (max. cSt @ -40°C). This allows this particular fluid to be well-suited to vehicles fitted with ESP/ASR (Electronic Stability Program) systems. Dot 4 LV is designed to be used in the hydraulic brake and clutch systems of cars, commercial vehicles, and motorcycles requiring a glycol-based Dot 3 or 4 brake fluid. It can be mixed with other glycol-based brake fluids without issue.

Typical dry boiling point – 266°C. Typical wet boiling point – 173°C.

BF005.1 is a premium spec, brake and clutch fluid for use in the hydraulic brake and clutch systems of all motorcycles, cars and commercial vehicles for which non-petroleum based fluid is specified.

Typical Dry Boiling Point - 269°C (516°F).
Typical. Wet Boiling Point - 184°C (363°F).

NOT SUITABLE FOR VEHICLES WITH MINERAL OIL SYSTEMS.

If in doubt consult vehicle handbook.