MT HELMETS

There's nothing stingy about the Stinger 2 helmet.

This sporty, entry-level model offers high-end performance and features for an incredibly competitive price.

The MT Stinger 2 has the latest ECE22.06 safety requirements. This full face helmet has been improved in many ways, but still proves that MT excels in affordable high performance helmets. The new Stinger 2 features a larger spoiler for better aerodynamics at higher speeds, the ventilation has been improved for even more comfort, even on the most sunny days. The helmet is equipped with a MaxVision pinlock prepared visor for a large field of view, resulting in a lot of safety on the road. The MaxVision Pinlock can be ordered in the bundle.

With comfort in mind, the Stinger 2 is equipped with a nice wide collar and wind guard to reduce wind noise and improve comfort. The inner lining is fully removable and washable. The helmet is equipped with a steel micrometic chin closure that can be easily operated with gloves on. This new MT Stinger 2 is therefore extremely suitable for moped and scooter use, or for the novice motorcyclist.

Key Features
• Lightweight HIRP (High Impact Resistant Polymer) shell
• 1 outer shell size
• Hi-impact absorption inner shell
• Homologated front protection "P"
• Multiple density EPS liner
• Anti-allergenic, breathable, moisture-wicking fabric blend for comfort and durability
• Removable and washable liner
• Perfect fit thanks to different interior sizes
• Breath deflector to prevent screen fogging
• Prepared for an intercom system
• Micrometric buckle
• Visor: MT-V-28B
• High-quality optical polycarbonate visor with quick release and pivoting visor mechanism
• Pinlock MaxVision insert ready: DKS435
• Front and top air vents with open/close system
• Interior air flow channels for temperature and moisture management
• Air extraction through rear vents to maximise airflow
• Rear deflector optimises the aerodynamics of this helmet
• Weight: 1450 grams (+/- 50 grams)
• ECE 22.06

There's nothing stingy about the Stinger 2 helmet.

This sporty, entry-level model offers high-end performance and features for an incredibly competitive price.

The MT Stinger 2 has the latest ECE22.06 safety requirements. This full face helmet has been improved in many ways, but still proves that MT excels in affordable high performance helmets. The new Stinger 2 features a larger spoiler for better aerodynamics at higher speeds, the ventilation has been improved for even more comfort, even on the most sunny days. The helmet is equipped with a MaxVision pinlock prepared visor for a large field of view, resulting in a lot of safety on the road. The MaxVision Pinlock can be ordered in the bundle.

With comfort in mind, the Stinger 2 is equipped with a nice wide collar and wind guard to reduce wind noise and improve comfort. The inner lining is fully removable and washable. The helmet is equipped with a steel micrometic chin closure that can be easily operated with gloves on. This new MT Stinger 2 is therefore extremely suitable for moped and scooter use, or for the novice motorcyclist.

Key Features
• Lightweight HIRP (High Impact Resistant Polymer) shell
• 1 outer shell size
• Hi-impact absorption inner shell
• Homologated front protection "P"
• Multiple density EPS liner
• Anti-allergenic, breathable, moisture-wicking fabric blend for comfort and durability
• Removable and washable liner
• Perfect fit thanks to different interior sizes
• Breath deflector to prevent screen fogging
• Prepared for an intercom system
• Micrometric buckle
• Visor: MT-V-28B
• High-quality optical polycarbonate visor with quick release and pivoting visor mechanism
• Pinlock MaxVision insert ready: DKS435
• Front and top air vents with open/close system
• Interior air flow channels for temperature and moisture management
• Air extraction through rear vents to maximise airflow
• Rear deflector optimises the aerodynamics of this helmet
• Weight: 1450 grams (+/- 50 grams)
• ECE 22.06

There's nothing stingy about the Stinger 2 helmet.

This sporty, entry-level model offers high-end performance and features for an incredibly competitive price.

The MT Stinger 2 has the latest ECE22.06 safety requirements. This full face helmet has been improved in many ways, but still proves that MT excels in affordable high performance helmets. The new Stinger 2 features a larger spoiler for better aerodynamics at higher speeds, the ventilation has been improved for even more comfort, even on the most sunny days. The helmet is equipped with a MaxVision pinlock prepared visor for a large field of view, resulting in a lot of safety on the road. The MaxVision Pinlock can be ordered in the bundle.

With comfort in mind, the Stinger 2 is equipped with a nice wide collar and wind guard to reduce wind noise and improve comfort. The inner lining is fully removable and washable. The helmet is equipped with a steel micrometic chin closure that can be easily operated with gloves on. This new MT Stinger 2 is therefore extremely suitable for moped and scooter use, or for the novice motorcyclist.

Key Features
• Lightweight HIRP (High Impact Resistant Polymer) shell
• 1 outer shell size
• Hi-impact absorption inner shell
• Homologated front protection "P"
• Multiple density EPS liner
• Anti-allergenic, breathable, moisture-wicking fabric blend for comfort and durability
• Removable and washable liner
• Perfect fit thanks to different interior sizes
• Breath deflector to prevent screen fogging
• Prepared for an intercom system
• Micrometric buckle
• Visor: MT-V-28B
• High-quality optical polycarbonate visor with quick release and pivoting visor mechanism
• Pinlock MaxVision insert ready: DKS435
• Front and top air vents with open/close system
• Interior air flow channels for temperature and moisture management
• Air extraction through rear vents to maximise airflow
• Rear deflector optimises the aerodynamics of this helmet
• Weight: 1450 grams (+/- 50 grams)
• ECE 22.06

The most affordable helmet on the market, with the highest safety homologation. The MT Thunder 4 SV represents all the drive and technological evolution of MT Helmets.

The arrival of the new ECE 22.06 certification has made MT Helmets a specialist in safety homologations and sends a very clear message to the industry: now safety on a bike is within everyone’s reach.

Features:

• HIRP Shell (High Impact Resistant Polymer) for excellent impact response. 2 Shell Sizes
• Three-Point Protector System – The base of this helmet has a three-point support system that has been developed to provide good stability when the Thunder 4 SV is placed on flat surfaces. This makes it easier to handle the helmet for cleaning or maintenance, but also allows the elements inside the helmet to be insulated from the surface, protecting them from chafing and, above all, enhancing hygiene when using the helmet
• Airflow Channel System – Through fluid dynamics analysis, air channels have been designed to minimize air resistance and boost internal ventilation flow, reducing temperature and moisture inside the helmet
• Reduced Aero Drag Design – An aerodynamic design studied by the MT Helmets engineering team to reduce aerodynamic resistance as much as possible
• Racing Spoiler
   
• ECE R-22.06 (EU) Approved. This helmet exceeds the highest safety standards and has passed, since its launch, the new ECE 22.06 test required for the European market
• Micrometric Double Toothed Closure – Redesigned micrometric retention system to keep the helmet always fastened and secured. The MT Helmets engineering department has developed this system to ensure that the fastener is locked by at least two points, ensuring that the system is secured. This locking system, optimal for sport-touring models, offers the best balance between wearing comfort and safety
• 1650 (+/-50) grams, its weight is well distributed
   
• Quick Visor Swap System – A system designed in-house by the MT Helmets Engineering team. The first helmet to feature this technology. This system, which has been patented by MT Helmets, allows the rider to attach/detach the visor really quickly and comfortably without having to take the helmet off
• Extended Vision Area – The extended vision area allows riders to have better visibility of their surroundings, increasing ride comfort and improving the riding experience and safety on the bike
• Extended Sun Visor Protection – Retractable sun visor system offering extended protection, preventing distortion due to changes in light conditions. It comes with a mechanism that can be quickly and comfortably used with one hand. It is also detachable for easy cleaning and maintenance.
• Pinlock 100% Max Vision – The Thunder 4 SV features space for a Pinlock 100% Max Vision insert
   
• The interior pads have been developed specifically for each helmet size to fit all head sizes in an optimal way
• The materials used for the manufacture of these elements combine different fabrics that favor ventilation, exhaust moisture, and drying quickly
• Removable and washable liners that allow you to keep your helmet clean and fresh
• Emergency Release System – Quick release system for side pads for removing the helmet in case of an accident. This system prevents possible damage during a helmet removal maneuver
• Universal Intercom Cage – This helmet has been developed taking into account the needs arising from the incorporation of an intercom system and has specific spaces to fit an intercom communication system

There's nothing stingy about the Stinger 2 helmet.

This sporty, entry-level model offers high-end performance and features for an incredibly competitive price.

The MT Stinger 2 has the latest ECE22.06 safety requirements. This full face helmet has been improved in many ways, but still proves that MT excels in affordable high performance helmets. The new Stinger 2 features a larger spoiler for better aerodynamics at higher speeds, the ventilation has been improved for even more comfort, even on the most sunny days. The helmet is equipped with a MaxVision pinlock prepared visor for a large field of view, resulting in a lot of safety on the road. The MaxVision Pinlock can be ordered in the bundle.

With comfort in mind, the Stinger 2 is equipped with a nice wide collar and wind guard to reduce wind noise and improve comfort. The inner lining is fully removable and washable. The helmet is equipped with a steel micrometic chin closure that can be easily operated with gloves on. This new MT Stinger 2 is therefore extremely suitable for moped and scooter use, or for the novice motorcyclist.

Key Features
• Lightweight HIRP (High Impact Resistant Polymer) shell
• 1 outer shell size
• Hi-impact absorption inner shell
• Homologated front protection "P"
• Multiple density EPS liner
• Anti-allergenic, breathable, moisture-wicking fabric blend for comfort and durability
• Removable and washable liner
• Perfect fit thanks to different interior sizes
• Breath deflector to prevent screen fogging
• Prepared for an intercom system
• Micrometric buckle
• Visor: MT-V-28B
• High-quality optical polycarbonate visor with quick release and pivoting visor mechanism
• Pinlock MaxVision insert ready: DKS435
• Front and top air vents with open/close system
• Interior air flow channels for temperature and moisture management
• Air extraction through rear vents to maximise airflow
• Rear deflector optimises the aerodynamics of this helmet
• Weight: 1450 grams (+/- 50 grams)
• ECE 22.06

The most affordable helmet on the market, with the highest safety homologation. The MT Thunder 4 SV represents all the drive and technological evolution of MT Helmets.

The arrival of the new ECE 22.06 certification has made MT Helmets a specialist in safety homologations and sends a very clear message to the industry: now safety on a bike is within everyone’s reach.

Features:

• HIRP Shell (High Impact Resistant Polymer) for excellent impact response. 2 Shell Sizes
• Three-Point Protector System – The base of this helmet has a three-point support system that has been developed to provide good stability when the Thunder 4 SV is placed on flat surfaces. This makes it easier to handle the helmet for cleaning or maintenance, but also allows the elements inside the helmet to be insulated from the surface, protecting them from chafing and, above all, enhancing hygiene when using the helmet
• Airflow Channel System – Through fluid dynamics analysis, air channels have been designed to minimize air resistance and boost internal ventilation flow, reducing temperature and moisture inside the helmet
• Reduced Aero Drag Design – An aerodynamic design studied by the MT Helmets engineering team to reduce aerodynamic resistance as much as possible
• Racing Spoiler
   
• ECE R-22.06 (EU) Approved. This helmet exceeds the highest safety standards and has passed, since its launch, the new ECE 22.06 test required for the European market
• Micrometric Double Toothed Closure – Redesigned micrometric retention system to keep the helmet always fastened and secured. The MT Helmets engineering department has developed this system to ensure that the fastener is locked by at least two points, ensuring that the system is secured. This locking system, optimal for sport-touring models, offers the best balance between wearing comfort and safety
• 1650 (+/-50) grams, its weight is well distributed
   
• Quick Visor Swap System – A system designed in-house by the MT Helmets Engineering team. The first helmet to feature this technology. This system, which has been patented by MT Helmets, allows the rider to attach/detach the visor really quickly and comfortably without having to take the helmet off
• Extended Vision Area – The extended vision area allows riders to have better visibility of their surroundings, increasing ride comfort and improving the riding experience and safety on the bike
• Extended Sun Visor Protection – Retractable sun visor system offering extended protection, preventing distortion due to changes in light conditions. It comes with a mechanism that can be quickly and comfortably used with one hand. It is also detachable for easy cleaning and maintenance.
• Pinlock 100% Max Vision – The Thunder 4 SV features space for a Pinlock 100% Max Vision insert
   
• The interior pads have been developed specifically for each helmet size to fit all head sizes in an optimal way
• The materials used for the manufacture of these elements combine different fabrics that favor ventilation, exhaust moisture, and drying quickly
• Removable and washable liners that allow you to keep your helmet clean and fresh
• Emergency Release System – Quick release system for side pads for removing the helmet in case of an accident. This system prevents possible damage during a helmet removal maneuver
• Universal Intercom Cage – This helmet has been developed taking into account the needs arising from the incorporation of an intercom system and has specific spaces to fit an intercom communication system

The MT Targo S represents the natural evolution of the Targo Pro, succeeding it to maintain MT's success in this segment with a brand new model that surpasses ECE 22.06 standards.

The Targo S boasts ECE 22.06 certification and not only features a new shell design, state-of-the-art interiors, and the ground-breaking MT-QVSS visor system but also incorporates a housing for the universal Bluetooth Communication System (UCS).

The new Targo S is an entry-level, full face, sport model that delivers the performance of a racing helmet and provides a high-level protection standard.

key Features
• Composition: HIRP (High Impact Resistance Polymer), a material that combines the best qualities with respect to the safety-weight ratio
• Number of shell sizes: 1 (XXS to XXL)
• Number of EPS liners: 2 (XXS-S and M-XXL)
• Available sizes: XXS to XXL
• Weight: 1500g +/- 20
• Visor: optically correct anti-scratch Polycarbonate visor
• Quick Visor Swap System (MT-QVSS): High-resistance visor with MT's QVSS system that makes it easy to change the visor in seconds, even with the helmet on.
• Ventilation: newly designed vents, spoiler and extraction system made of polycarbonate (front air intake, upper air intake and triple rear outlets)
• Closure: micrometric MT-MDTC type with a double-tooth system
• MT-NSIC intercom: housing for standard UCS intercom
• Removable interiors: breathable, removable, and washable interior components
• Anti-fog insert ready: Fogoff FOG003 and Pinlock DKS209
• ECE 22.06: designed from the ground up to exceed ECE 22.06 regulations
• Visor: MT-V-14B

The MT Targo S represents the natural evolution of the Targo Pro, succeeding it to maintain MT's success in this segment with a brand new model that surpasses ECE 22.06 standards.

The Targo S boasts ECE 22.06 certification and not only features a new shell design, state-of-the-art interiors, and the ground-breaking MT-QVSS visor system but also incorporates a housing for the universal Bluetooth Communication System (UCS).

The new Targo S is an entry-level, full face, sport model that delivers the performance of a racing helmet and provides a high-level protection standard.

key Features
• Composition: HIRP (High Impact Resistance Polymer), a material that combines the best qualities with respect to the safety-weight ratio
• Number of shell sizes: 1 (XXS to XXL)
• Number of EPS liners: 2 (XXS-S and M-XXL)
• Available sizes: XXS to XXL
• Weight: 1500g +/- 20
• Visor: optically correct anti-scratch Polycarbonate visor
• Quick Visor Swap System (MT-QVSS): High-resistance visor with MT's QVSS system that makes it easy to change the visor in seconds, even with the helmet on.
• Ventilation: newly designed vents, spoiler and extraction system made of polycarbonate (front air intake, upper air intake and triple rear outlets)
• Closure: micrometric MT-MDTC type with a double-tooth system
• MT-NSIC intercom: housing for standard UCS intercom
• Removable interiors: breathable, removable, and washable interior components
• Anti-fog insert ready: Fogoff FOG003 and Pinlock DKS209
• ECE 22.06: designed from the ground up to exceed ECE 22.06 regulations
• Visor: MT-V-14B

There's nothing stingy about the Stinger 2 helmet.

This sporty, entry-level model offers high-end performance and features for an incredibly competitive price.

The MT Stinger 2 has the latest ECE22.06 safety requirements. This full face helmet has been improved in many ways, but still proves that MT excels in affordable high performance helmets. The new Stinger 2 features a larger spoiler for better aerodynamics at higher speeds, the ventilation has been improved for even more comfort, even on the most sunny days. The helmet is equipped with a MaxVision pinlock prepared visor for a large field of view, resulting in a lot of safety on the road. The MaxVision Pinlock can be ordered in the bundle.

With comfort in mind, the Stinger 2 is equipped with a nice wide collar and wind guard to reduce wind noise and improve comfort. The inner lining is fully removable and washable. The helmet is equipped with a steel micrometic chin closure that can be easily operated with gloves on. This new MT Stinger 2 is therefore extremely suitable for moped and scooter use, or for the novice motorcyclist.

Key Features
• Lightweight HIRP (High Impact Resistant Polymer) shell
• 1 outer shell size
• Hi-impact absorption inner shell
• Homologated front protection "P"
• Multiple density EPS liner
• Anti-allergenic, breathable, moisture-wicking fabric blend for comfort and durability
• Removable and washable liner
• Perfect fit thanks to different interior sizes
• Breath deflector to prevent screen fogging
• Prepared for an intercom system
• Micrometric buckle
• Visor: MT-V-28B
• High-quality optical polycarbonate visor with quick release and pivoting visor mechanism
• Pinlock MaxVision insert ready: DKS435
• Front and top air vents with open/close system
• Interior air flow channels for temperature and moisture management
• Air extraction through rear vents to maximise airflow
• Rear deflector optimises the aerodynamics of this helmet
• Weight: 1450 grams (+/- 50 grams)
• ECE 22.06

There's nothing stingy about the Stinger 2 helmet.

This sporty, entry-level model offers high-end performance and features for an incredibly competitive price.

The MT Stinger 2 has the latest ECE22.06 safety requirements. This full face helmet has been improved in many ways, but still proves that MT excels in affordable high performance helmets. The new Stinger 2 features a larger spoiler for better aerodynamics at higher speeds, the ventilation has been improved for even more comfort, even on the most sunny days. The helmet is equipped with a MaxVision pinlock prepared visor for a large field of view, resulting in a lot of safety on the road. The MaxVision Pinlock can be ordered in the bundle.

With comfort in mind, the Stinger 2 is equipped with a nice wide collar and wind guard to reduce wind noise and improve comfort. The inner lining is fully removable and washable. The helmet is equipped with a steel micrometic chin closure that can be easily operated with gloves on. This new MT Stinger 2 is therefore extremely suitable for moped and scooter use, or for the novice motorcyclist.

Key Features
• Lightweight HIRP (High Impact Resistant Polymer) shell
• 1 outer shell size
• Hi-impact absorption inner shell
• Homologated front protection "P"
• Multiple density EPS liner
• Anti-allergenic, breathable, moisture-wicking fabric blend for comfort and durability
• Removable and washable liner
• Perfect fit thanks to different interior sizes
• Breath deflector to prevent screen fogging
• Prepared for an intercom system
• Micrometric buckle
• Visor: MT-V-28B
• High-quality optical polycarbonate visor with quick release and pivoting visor mechanism
• Pinlock MaxVision insert ready: DKS435
• Front and top air vents with open/close system
• Interior air flow channels for temperature and moisture management
• Air extraction through rear vents to maximise airflow
• Rear deflector optimises the aerodynamics of this helmet
• Weight: 1450 grams (+/- 50 grams)
• ECE 22.06

This sporty full face helmet features a curved base, integrated spoiler and big vents, combining that with two shell sizes over the size range and low weight make for a lower aerodynamic profile.

Cold weather breath guard, breathable fabrics, and space for speakers provide a comfortable riding experience.

Features:

• 2 Sizes shell
• HIRP shell construction
• Removable and washable lining
• Full metallic micrometric buckle.
• Multiple density inner shell.
• Optical correct anti-scratch visor.
• Fast and easy visor removal and replacement system.
• Nose deflector included.
• Steel visor lock system.
• Optimum visor sealing.
• 2.2 mm thickness visor.
• ECE and DOT certified
• XS-M 1400g; L-2XL 1500g (+/- 50g)

Note: Tinted visor pictured is available as an optional extra.

This sporty full face helmet features a curved base, integrated spoiler and big vents, combining that with two shell sizes over the size range and low weight make for a lower aerodynamic profile.

Cold weather breath guard, breathable fabrics, and space for speakers provide a comfortable riding experience.

Features:

• 2 Sizes shell
• HIRP shell construction
• Removable and washable lining
• Full metallic micrometric buckle.
• Multiple density inner shell.
• Optical correct anti-scratch visor.
• Fast and easy visor removal and replacement system.
• Nose deflector included.
• Steel visor lock system.
• Optimum visor sealing.
• 2.2 mm thickness visor.
• ECE and DOT certified
• XS-M 1400g; L-2XL 1500g (+/- 50g)

Note: Tinted visor pictured is available as an optional extra.

MT’s do-it-all go anywhere helmet. For the urban commute or the long tour, the new Thunder 3 SV will accommodate any ride you throw at it. A multi dimensional fit and available in 2 shell sizes, this helmet will comfortably fit most head shapes. Features an internal drop down visor and a Pinlock Max vision visor.

Features:

• 4/5 Star Sharp Rating
• Drop Down Inner Sun Visor
• Hi-Impact Absorption Inner Shell
• Multiple Density EPS Liner
• Optimum Visor Closing
• Homologated Front Protection “P”
• Quick Release Micrometric Buckle
• 2 Outer Shell Sizes
• Pinlock Max Vision Visor
• Removable And Washable Liner
• Optically Correct Anti Scratch Polycarbonate Visor
• Quick Release Visor
• Aerodynamic Design
• Vent System
• ECE/ONU.22.05.P
• NBR7471
• NTC 4533
• ACU Gold Standard
• Glow In The Dark Features
• MT-V-12 Pinlock Max visor

This sporty full face helmet features a curved base, integrated spoiler and big vents, combining that with two shell sizes over the size range and low weight make for a lower aerodynamic profile.

Cold weather breath guard, breathable fabrics, and space for speakers provide a comfortable riding experience.

Features:

• 2 Sizes shell
• HIRP shell construction
• Removable and washable lining
• Full metallic micrometric buckle.
• Multiple density inner shell.
• Optical correct anti-scratch visor.
• Fast and easy visor removal and replacement system.
• Nose deflector included.
• Steel visor lock system.
• Optimum visor sealing.
• 2.2 mm thickness visor.
• ECE and DOT certified
• XS-M 1400g; L-2XL 1500g (+/- 50g)

Note: Tinted visor pictured is available as an optional extra.

This sporty full face helmet features a curved base, integrated spoiler and big vents, combining that with two shell sizes over the size range and low weight make for a lower aerodynamic profile.

Cold weather breath guard, breathable fabrics, and space for speakers provide a comfortable riding experience.

Features:

• 2 Sizes shell
• HIRP shell construction
• Removable and washable lining
• Full metallic micrometric buckle.
• Multiple density inner shell.
• Optical correct anti-scratch visor.
• Fast and easy visor removal and replacement system.
• Nose deflector included.
• Steel visor lock system.
• Optimum visor sealing.
• 2.2 mm thickness visor.
• ECE and DOT certified
• XS-M 1400g; L-2XL 1500g (+/- 50g)

Note: Tinted visor pictured is available as an optional extra.

There's nothing stingy about the Stinger 2 helmet.

This sporty, entry-level model offers high-end performance and features for an incredibly competitive price.

The MT Stinger 2 has the latest ECE22.06 safety requirements. This full face helmet has been improved in many ways, but still proves that MT excels in affordable high performance helmets. The new Stinger 2 features a larger spoiler for better aerodynamics at higher speeds, the ventilation has been improved for even more comfort, even on the most sunny days. The helmet is equipped with a MaxVision pinlock prepared visor for a large field of view, resulting in a lot of safety on the road. The MaxVision Pinlock can be ordered in the bundle.

With comfort in mind, the Stinger 2 is equipped with a nice wide collar and wind guard to reduce wind noise and improve comfort. The inner lining is fully removable and washable. The helmet is equipped with a steel micrometic chin closure that can be easily operated with gloves on. This new MT Stinger 2 is therefore extremely suitable for moped and scooter use, or for the novice motorcyclist.

Key Features
• Lightweight HIRP (High Impact Resistant Polymer) shell
• 1 outer shell size
• Hi-impact absorption inner shell
• Homologated front protection "P"
• Multiple density EPS liner
• Anti-allergenic, breathable, moisture-wicking fabric blend for comfort and durability
• Removable and washable liner
• Perfect fit thanks to different interior sizes
• Breath deflector to prevent screen fogging
• Prepared for an intercom system
• Micrometric buckle
• Visor: MT-V-28B
• High-quality optical polycarbonate visor with quick release and pivoting visor mechanism
• Pinlock MaxVision insert ready: DKS435
• Front and top air vents with open/close system
• Interior air flow channels for temperature and moisture management
• Air extraction through rear vents to maximise airflow
• Rear deflector optimises the aerodynamics of this helmet
• Weight: 1450 grams (+/- 50 grams)
• ECE 22.06

There's nothing stingy about the Stinger 2 helmet.

This sporty, entry-level model offers high-end performance and features for an incredibly competitive price.

The MT Stinger 2 has the latest ECE22.06 safety requirements. This full face helmet has been improved in many ways, but still proves that MT excels in affordable high performance helmets. The new Stinger 2 features a larger spoiler for better aerodynamics at higher speeds, the ventilation has been improved for even more comfort, even on the most sunny days. The helmet is equipped with a MaxVision pinlock prepared visor for a large field of view, resulting in a lot of safety on the road. The MaxVision Pinlock can be ordered in the bundle.

With comfort in mind, the Stinger 2 is equipped with a nice wide collar and wind guard to reduce wind noise and improve comfort. The inner lining is fully removable and washable. The helmet is equipped with a steel micrometic chin closure that can be easily operated with gloves on. This new MT Stinger 2 is therefore extremely suitable for moped and scooter use, or for the novice motorcyclist.

Key Features
• Lightweight HIRP (High Impact Resistant Polymer) shell
• 1 outer shell size
• Hi-impact absorption inner shell
• Homologated front protection "P"
• Multiple density EPS liner
• Anti-allergenic, breathable, moisture-wicking fabric blend for comfort and durability
• Removable and washable liner
• Perfect fit thanks to different interior sizes
• Breath deflector to prevent screen fogging
• Prepared for an intercom system
• Micrometric buckle
• Visor: MT-V-28B
• High-quality optical polycarbonate visor with quick release and pivoting visor mechanism
• Pinlock MaxVision insert ready: DKS435
• Front and top air vents with open/close system
• Interior air flow channels for temperature and moisture management
• Air extraction through rear vents to maximise airflow
• Rear deflector optimises the aerodynamics of this helmet
• Weight: 1450 grams (+/- 50 grams)
• ECE 22.06

There's nothing stingy about the Stinger 2 helmet.

This sporty, entry-level model offers high-end performance and features for an incredibly competitive price.

The MT Stinger 2 has the latest ECE22.06 safety requirements. This full face helmet has been improved in many ways, but still proves that MT excels in affordable high performance helmets. The new Stinger 2 features a larger spoiler for better aerodynamics at higher speeds, the ventilation has been improved for even more comfort, even on the most sunny days. The helmet is equipped with a MaxVision pinlock prepared visor for a large field of view, resulting in a lot of safety on the road. The MaxVision Pinlock can be ordered in the bundle.

With comfort in mind, the Stinger 2 is equipped with a nice wide collar and wind guard to reduce wind noise and improve comfort. The inner lining is fully removable and washable. The helmet is equipped with a steel micrometic chin closure that can be easily operated with gloves on. This new MT Stinger 2 is therefore extremely suitable for moped and scooter use, or for the novice motorcyclist.

Key Features
• Lightweight HIRP (High Impact Resistant Polymer) shell
• 1 outer shell size
• Hi-impact absorption inner shell
• Homologated front protection "P"
• Multiple density EPS liner
• Anti-allergenic, breathable, moisture-wicking fabric blend for comfort and durability
• Removable and washable liner
• Perfect fit thanks to different interior sizes
• Breath deflector to prevent screen fogging
• Prepared for an intercom system
• Micrometric buckle
• Visor: MT-V-28B
• High-quality optical polycarbonate visor with quick release and pivoting visor mechanism
• Pinlock MaxVision insert ready: DKS435
• Front and top air vents with open/close system
• Interior air flow channels for temperature and moisture management
• Air extraction through rear vents to maximise airflow
• Rear deflector optimises the aerodynamics of this helmet
• Weight: 1450 grams (+/- 50 grams)
• ECE 22.06

The most affordable helmet on the market, with the highest safety homologation. The MT Thunder 4 SV represents all the drive and technological evolution of MT Helmets.

The arrival of the new ECE 22.06 certification has made MT Helmets a specialist in safety homologations and sends a very clear message to the industry: now safety on a bike is within everyone’s reach.

Features:

• HIRP Shell (High Impact Resistant Polymer) for excellent impact response. 2 Shell Sizes
• Three-Point Protector System – The base of this helmet has a three-point support system that has been developed to provide good stability when the Thunder 4 SV is placed on flat surfaces. This makes it easier to handle the helmet for cleaning or maintenance, but also allows the elements inside the helmet to be insulated from the surface, protecting them from chafing and, above all, enhancing hygiene when using the helmet
• Airflow Channel System – Through fluid dynamics analysis, air channels have been designed to minimize air resistance and boost internal ventilation flow, reducing temperature and moisture inside the helmet
• Reduced Aero Drag Design – An aerodynamic design studied by the MT Helmets engineering team to reduce aerodynamic resistance as much as possible
• Racing Spoiler
   
• ECE R-22.06 (EU) Approved. This helmet exceeds the highest safety standards and has passed, since its launch, the new ECE 22.06 test required for the European market
• Micrometric Double Toothed Closure – Redesigned micrometric retention system to keep the helmet always fastened and secured. The MT Helmets engineering department has developed this system to ensure that the fastener is locked by at least two points, ensuring that the system is secured. This locking system, optimal for sport-touring models, offers the best balance between wearing comfort and safety
• 1650 (+/-50) grams, its weight is well distributed
   
• Quick Visor Swap System – A system designed in-house by the MT Helmets Engineering team. The first helmet to feature this technology. This system, which has been patented by MT Helmets, allows the rider to attach/detach the visor really quickly and comfortably without having to take the helmet off
• Extended Vision Area – The extended vision area allows riders to have better visibility of their surroundings, increasing ride comfort and improving the riding experience and safety on the bike
• Extended Sun Visor Protection – Retractable sun visor system offering extended protection, preventing distortion due to changes in light conditions. It comes with a mechanism that can be quickly and comfortably used with one hand. It is also detachable for easy cleaning and maintenance.
• Pinlock 100% Max Vision – The Thunder 4 SV features space for a Pinlock 100% Max Vision insert
   
• The interior pads have been developed specifically for each helmet size to fit all head sizes in an optimal way
• The materials used for the manufacture of these elements combine different fabrics that favor ventilation, exhaust moisture, and drying quickly
• Removable and washable liners that allow you to keep your helmet clean and fresh
• Emergency Release System – Quick release system for side pads for removing the helmet in case of an accident. This system prevents possible damage during a helmet removal maneuver
• Universal Intercom Cage – This helmet has been developed taking into account the needs arising from the incorporation of an intercom system and has specific spaces to fit an intercom communication system

The most affordable helmet on the market, with the highest safety homologation. The MT Thunder 4 SV represents all the drive and technological evolution of MT Helmets.

The arrival of the new ECE 22.06 certification has made MT Helmets a specialist in safety homologations and sends a very clear message to the industry: now safety on a bike is within everyone’s reach.

Features:

• HIRP Shell (High Impact Resistant Polymer) for excellent impact response. 2 Shell Sizes
• Three-Point Protector System – The base of this helmet has a three-point support system that has been developed to provide good stability when the Thunder 4 SV is placed on flat surfaces. This makes it easier to handle the helmet for cleaning or maintenance, but also allows the elements inside the helmet to be insulated from the surface, protecting them from chafing and, above all, enhancing hygiene when using the helmet
• Airflow Channel System – Through fluid dynamics analysis, air channels have been designed to minimize air resistance and boost internal ventilation flow, reducing temperature and moisture inside the helmet
• Reduced Aero Drag Design – An aerodynamic design studied by the MT Helmets engineering team to reduce aerodynamic resistance as much as possible
• Racing Spoiler
   
• ECE R-22.06 (EU) Approved. This helmet exceeds the highest safety standards and has passed, since its launch, the new ECE 22.06 test required for the European market
• Micrometric Double Toothed Closure – Redesigned micrometric retention system to keep the helmet always fastened and secured. The MT Helmets engineering department has developed this system to ensure that the fastener is locked by at least two points, ensuring that the system is secured. This locking system, optimal for sport-touring models, offers the best balance between wearing comfort and safety
• 1650 (+/-50) grams, its weight is well distributed
   
• Quick Visor Swap System – A system designed in-house by the MT Helmets Engineering team. The first helmet to feature this technology. This system, which has been patented by MT Helmets, allows the rider to attach/detach the visor really quickly and comfortably without having to take the helmet off
• Extended Vision Area – The extended vision area allows riders to have better visibility of their surroundings, increasing ride comfort and improving the riding experience and safety on the bike
• Extended Sun Visor Protection – Retractable sun visor system offering extended protection, preventing distortion due to changes in light conditions. It comes with a mechanism that can be quickly and comfortably used with one hand. It is also detachable for easy cleaning and maintenance.
• Pinlock 100% Max Vision – The Thunder 4 SV features space for a Pinlock 100% Max Vision insert
   
• The interior pads have been developed specifically for each helmet size to fit all head sizes in an optimal way
• The materials used for the manufacture of these elements combine different fabrics that favor ventilation, exhaust moisture, and drying quickly
• Removable and washable liners that allow you to keep your helmet clean and fresh
• Emergency Release System – Quick release system for side pads for removing the helmet in case of an accident. This system prevents possible damage during a helmet removal maneuver
• Universal Intercom Cage – This helmet has been developed taking into account the needs arising from the incorporation of an intercom system and has specific spaces to fit an intercom communication system

The most affordable helmet on the market, with the highest safety homologation. The MT Thunder 4 SV represents all the drive and technological evolution of MT Helmets.

The arrival of the new ECE 22.06 certification has made MT Helmets a specialist in safety homologations and sends a very clear message to the industry: now safety on a bike is within everyone’s reach.

Features:

• HIRP Shell (High Impact Resistant Polymer) for excellent impact response. 2 Shell Sizes
• Three-Point Protector System – The base of this helmet has a three-point support system that has been developed to provide good stability when the Thunder 4 SV is placed on flat surfaces. This makes it easier to handle the helmet for cleaning or maintenance, but also allows the elements inside the helmet to be insulated from the surface, protecting them from chafing and, above all, enhancing hygiene when using the helmet
• Airflow Channel System – Through fluid dynamics analysis, air channels have been designed to minimize air resistance and boost internal ventilation flow, reducing temperature and moisture inside the helmet
• Reduced Aero Drag Design – An aerodynamic design studied by the MT Helmets engineering team to reduce aerodynamic resistance as much as possible
• Racing Spoiler
   
• ECE R-22.06 (EU) Approved. This helmet exceeds the highest safety standards and has passed, since its launch, the new ECE 22.06 test required for the European market
• Micrometric Double Toothed Closure – Redesigned micrometric retention system to keep the helmet always fastened and secured. The MT Helmets engineering department has developed this system to ensure that the fastener is locked by at least two points, ensuring that the system is secured. This locking system, optimal for sport-touring models, offers the best balance between wearing comfort and safety
• 1650 (+/-50) grams, its weight is well distributed
   
• Quick Visor Swap System – A system designed in-house by the MT Helmets Engineering team. The first helmet to feature this technology. This system, which has been patented by MT Helmets, allows the rider to attach/detach the visor really quickly and comfortably without having to take the helmet off
• Extended Vision Area – The extended vision area allows riders to have better visibility of their surroundings, increasing ride comfort and improving the riding experience and safety on the bike
• Extended Sun Visor Protection – Retractable sun visor system offering extended protection, preventing distortion due to changes in light conditions. It comes with a mechanism that can be quickly and comfortably used with one hand. It is also detachable for easy cleaning and maintenance.
• Pinlock 100% Max Vision – The Thunder 4 SV features space for a Pinlock 100% Max Vision insert
   
• The interior pads have been developed specifically for each helmet size to fit all head sizes in an optimal way
• The materials used for the manufacture of these elements combine different fabrics that favor ventilation, exhaust moisture, and drying quickly
• Removable and washable liners that allow you to keep your helmet clean and fresh
• Emergency Release System – Quick release system for side pads for removing the helmet in case of an accident. This system prevents possible damage during a helmet removal maneuver
• Universal Intercom Cage – This helmet has been developed taking into account the needs arising from the incorporation of an intercom system and has specific spaces to fit an intercom communication system

The most affordable helmet on the market, with the highest safety homologation. The MT Thunder 4 SV represents all the drive and technological evolution of MT Helmets.

The arrival of the new ECE 22.06 certification has made MT Helmets a specialist in safety homologations and sends a very clear message to the industry: now safety on a bike is within everyone’s reach.

Features:

• HIRP Shell (High Impact Resistant Polymer) for excellent impact response. 2 Shell Sizes
• Three-Point Protector System – The base of this helmet has a three-point support system that has been developed to provide good stability when the Thunder 4 SV is placed on flat surfaces. This makes it easier to handle the helmet for cleaning or maintenance, but also allows the elements inside the helmet to be insulated from the surface, protecting them from chafing and, above all, enhancing hygiene when using the helmet
• Airflow Channel System – Through fluid dynamics analysis, air channels have been designed to minimize air resistance and boost internal ventilation flow, reducing temperature and moisture inside the helmet
• Reduced Aero Drag Design – An aerodynamic design studied by the MT Helmets engineering team to reduce aerodynamic resistance as much as possible
• Racing Spoiler
   
• ECE R-22.06 (EU) Approved. This helmet exceeds the highest safety standards and has passed, since its launch, the new ECE 22.06 test required for the European market
• Micrometric Double Toothed Closure – Redesigned micrometric retention system to keep the helmet always fastened and secured. The MT Helmets engineering department has developed this system to ensure that the fastener is locked by at least two points, ensuring that the system is secured. This locking system, optimal for sport-touring models, offers the best balance between wearing comfort and safety
• 1650 (+/-50) grams, its weight is well distributed
   
• Quick Visor Swap System – A system designed in-house by the MT Helmets Engineering team. The first helmet to feature this technology. This system, which has been patented by MT Helmets, allows the rider to attach/detach the visor really quickly and comfortably without having to take the helmet off
• Extended Vision Area – The extended vision area allows riders to have better visibility of their surroundings, increasing ride comfort and improving the riding experience and safety on the bike
• Extended Sun Visor Protection – Retractable sun visor system offering extended protection, preventing distortion due to changes in light conditions. It comes with a mechanism that can be quickly and comfortably used with one hand. It is also detachable for easy cleaning and maintenance.
• Pinlock 100% Max Vision – The Thunder 4 SV features space for a Pinlock 100% Max Vision insert
   
• The interior pads have been developed specifically for each helmet size to fit all head sizes in an optimal way
• The materials used for the manufacture of these elements combine different fabrics that favor ventilation, exhaust moisture, and drying quickly
• Removable and washable liners that allow you to keep your helmet clean and fresh
• Emergency Release System – Quick release system for side pads for removing the helmet in case of an accident. This system prevents possible damage during a helmet removal maneuver
• Universal Intercom Cage – This helmet has been developed taking into account the needs arising from the incorporation of an intercom system and has specific spaces to fit an intercom communication system

The most affordable helmet on the market, with the highest safety homologation. The MT Thunder 4 SV represents all the drive and technological evolution of MT Helmets.

The arrival of the new ECE 22.06 certification has made MT Helmets a specialist in safety homologations and sends a very clear message to the industry: now safety on a bike is within everyone’s reach.

Features:

• HIRP Shell (High Impact Resistant Polymer) for excellent impact response. 2 Shell Sizes
• Three-Point Protector System – The base of this helmet has a three-point support system that has been developed to provide good stability when the Thunder 4 SV is placed on flat surfaces. This makes it easier to handle the helmet for cleaning or maintenance, but also allows the elements inside the helmet to be insulated from the surface, protecting them from chafing and, above all, enhancing hygiene when using the helmet
• Airflow Channel System – Through fluid dynamics analysis, air channels have been designed to minimize air resistance and boost internal ventilation flow, reducing temperature and moisture inside the helmet
• Reduced Aero Drag Design – An aerodynamic design studied by the MT Helmets engineering team to reduce aerodynamic resistance as much as possible
• Racing Spoiler
   
• ECE R-22.06 (EU) Approved. This helmet exceeds the highest safety standards and has passed, since its launch, the new ECE 22.06 test required for the European market
• Micrometric Double Toothed Closure – Redesigned micrometric retention system to keep the helmet always fastened and secured. The MT Helmets engineering department has developed this system to ensure that the fastener is locked by at least two points, ensuring that the system is secured. This locking system, optimal for sport-touring models, offers the best balance between wearing comfort and safety
• 1650 (+/-50) grams, its weight is well distributed
   
• Quick Visor Swap System – A system designed in-house by the MT Helmets Engineering team. The first helmet to feature this technology. This system, which has been patented by MT Helmets, allows the rider to attach/detach the visor really quickly and comfortably without having to take the helmet off
• Extended Vision Area – The extended vision area allows riders to have better visibility of their surroundings, increasing ride comfort and improving the riding experience and safety on the bike
• Extended Sun Visor Protection – Retractable sun visor system offering extended protection, preventing distortion due to changes in light conditions. It comes with a mechanism that can be quickly and comfortably used with one hand. It is also detachable for easy cleaning and maintenance.
• Pinlock 100% Max Vision – The Thunder 4 SV features space for a Pinlock 100% Max Vision insert
   
• The interior pads have been developed specifically for each helmet size to fit all head sizes in an optimal way
• The materials used for the manufacture of these elements combine different fabrics that favor ventilation, exhaust moisture, and drying quickly
• Removable and washable liners that allow you to keep your helmet clean and fresh
• Emergency Release System – Quick release system for side pads for removing the helmet in case of an accident. This system prevents possible damage during a helmet removal maneuver
• Universal Intercom Cage – This helmet has been developed taking into account the needs arising from the incorporation of an intercom system and has specific spaces to fit an intercom communication system

The perfect helmet for any use. This model has an excellent fitting and also attractive graphics. Special comfort fabrics.
Can be used like Snowmobile helmet with snow breathguard, snowmobile neck curtain and “double or electric lens”.

Features:

• Aerodynamic Shape
• Homologated Front Protection "P"
• Removable and Washable Pads
• Inner Shell with Hi-Impact Absortion
• Fire Retardant Fabric Lining
• Multiple Density Inner Shell
• Anti Scratch Visor in Optical Polycarbonate
• Quick Release Visor
• Optimum Visor Closing
• Pinlock Ready
• Metallic Quick Release Micrometric Buckle
• Weight 1450g
• MT-V-14 visor

The most affordable helmet on the market, with the highest safety homologation. The MT Thunder 4 SV represents all the drive and technological evolution of MT Helmets.

The arrival of the new ECE 22.06 certification has made MT Helmets a specialist in safety homologations and sends a very clear message to the industry: now safety on a bike is within everyone’s reach.

Features:

• HIRP Shell (High Impact Resistant Polymer) for excellent impact response. 2 Shell Sizes
• Three-Point Protector System – The base of this helmet has a three-point support system that has been developed to provide good stability when the Thunder 4 SV is placed on flat surfaces. This makes it easier to handle the helmet for cleaning or maintenance, but also allows the elements inside the helmet to be insulated from the surface, protecting them from chafing and, above all, enhancing hygiene when using the helmet
• Airflow Channel System – Through fluid dynamics analysis, air channels have been designed to minimize air resistance and boost internal ventilation flow, reducing temperature and moisture inside the helmet
• Reduced Aero Drag Design – An aerodynamic design studied by the MT Helmets engineering team to reduce aerodynamic resistance as much as possible
• Racing Spoiler
   
• ECE R-22.06 (EU) Approved. This helmet exceeds the highest safety standards and has passed, since its launch, the new ECE 22.06 test required for the European market
• Micrometric Double Toothed Closure – Redesigned micrometric retention system to keep the helmet always fastened and secured. The MT Helmets engineering department has developed this system to ensure that the fastener is locked by at least two points, ensuring that the system is secured. This locking system, optimal for sport-touring models, offers the best balance between wearing comfort and safety
• 1650 (+/-50) grams, its weight is well distributed
   
• Quick Visor Swap System – A system designed in-house by the MT Helmets Engineering team. The first helmet to feature this technology. This system, which has been patented by MT Helmets, allows the rider to attach/detach the visor really quickly and comfortably without having to take the helmet off
• Extended Vision Area – The extended vision area allows riders to have better visibility of their surroundings, increasing ride comfort and improving the riding experience and safety on the bike
• Extended Sun Visor Protection – Retractable sun visor system offering extended protection, preventing distortion due to changes in light conditions. It comes with a mechanism that can be quickly and comfortably used with one hand. It is also detachable for easy cleaning and maintenance.
• Pinlock 100% Max Vision – The Thunder 4 SV features space for a Pinlock 100% Max Vision insert
   
• The interior pads have been developed specifically for each helmet size to fit all head sizes in an optimal way
• The materials used for the manufacture of these elements combine different fabrics that favor ventilation, exhaust moisture, and drying quickly
• Removable and washable liners that allow you to keep your helmet clean and fresh
• Emergency Release System – Quick release system for side pads for removing the helmet in case of an accident. This system prevents possible damage during a helmet removal maneuver
• Universal Intercom Cage – This helmet has been developed taking into account the needs arising from the incorporation of an intercom system and has specific spaces to fit an intercom communication system

MT’s do-it-all go anywhere helmet. For the urban commute or the long tour, the new Thunder 3 SV will accommodate any ride you throw at it. A multi dimensional fit and available in 2 shell sizes, this helmet will comfortably fit most head shapes. Features an internal drop down visor and a Pinlock Max vision visor.

Features:

• 4/5 Star Sharp Rating
• Drop Down Inner Sun Visor
• Hi-Impact Absorption Inner Shell
• Multiple Density EPS Liner
• Optimum Visor Closing
• Homologated Front Protection “P”
• Quick Release Micrometric Buckle
• 2 Outer Shell Sizes
• Pinlock Max Vision Visor
• Removable And Washable Liner
• Optically Correct Anti Scratch Polycarbonate Visor
• Quick Release Visor
• Aerodynamic Design
• Vent System
• ECE/ONU.22.05.P
• NBR7471
• NTC 4533
• ACU Gold Standard
• Glow In The Dark Features
• MT-V-12 Pinlock Max visor

The most affordable helmet on the market, with the highest safety homologation. The MT Thunder 4 SV represents all the drive and technological evolution of MT Helmets.

The arrival of the new ECE 22.06 certification has made MT Helmets a specialist in safety homologations and sends a very clear message to the industry: now safety on a bike is within everyone’s reach.

Features:

• HIRP Shell (High Impact Resistant Polymer) for excellent impact response. 2 Shell Sizes
• Three-Point Protector System – The base of this helmet has a three-point support system that has been developed to provide good stability when the Thunder 4 SV is placed on flat surfaces. This makes it easier to handle the helmet for cleaning or maintenance, but also allows the elements inside the helmet to be insulated from the surface, protecting them from chafing and, above all, enhancing hygiene when using the helmet
• Airflow Channel System – Through fluid dynamics analysis, air channels have been designed to minimize air resistance and boost internal ventilation flow, reducing temperature and moisture inside the helmet
• Reduced Aero Drag Design – An aerodynamic design studied by the MT Helmets engineering team to reduce aerodynamic resistance as much as possible
• Racing Spoiler
   
• ECE R-22.06 (EU) Approved. This helmet exceeds the highest safety standards and has passed, since its launch, the new ECE 22.06 test required for the European market
• Micrometric Double Toothed Closure – Redesigned micrometric retention system to keep the helmet always fastened and secured. The MT Helmets engineering department has developed this system to ensure that the fastener is locked by at least two points, ensuring that the system is secured. This locking system, optimal for sport-touring models, offers the best balance between wearing comfort and safety
• 1650 (+/-50) grams, its weight is well distributed
   
• Quick Visor Swap System – A system designed in-house by the MT Helmets Engineering team. The first helmet to feature this technology. This system, which has been patented by MT Helmets, allows the rider to attach/detach the visor really quickly and comfortably without having to take the helmet off
• Extended Vision Area – The extended vision area allows riders to have better visibility of their surroundings, increasing ride comfort and improving the riding experience and safety on the bike
• Extended Sun Visor Protection – Retractable sun visor system offering extended protection, preventing distortion due to changes in light conditions. It comes with a mechanism that can be quickly and comfortably used with one hand. It is also detachable for easy cleaning and maintenance.
• Pinlock 100% Max Vision – The Thunder 4 SV features space for a Pinlock 100% Max Vision insert
   
• The interior pads have been developed specifically for each helmet size to fit all head sizes in an optimal way
• The materials used for the manufacture of these elements combine different fabrics that favor ventilation, exhaust moisture, and drying quickly
• Removable and washable liners that allow you to keep your helmet clean and fresh
• Emergency Release System – Quick release system for side pads for removing the helmet in case of an accident. This system prevents possible damage during a helmet removal maneuver
• Universal Intercom Cage – This helmet has been developed taking into account the needs arising from the incorporation of an intercom system and has specific spaces to fit an intercom communication system

The perfect sport helmet, now with a new innovative pro spoiler. Excellent fit with attractive graphics and comfort fabrics used internally!

Features:

• HIRP Shell (High Impact Resistant Polymer) , 1 shell size. Aerodynamic design
• New innovative spoiler design
• Removable and Washable lining
• Anti-allergic fabrics
• Inner ventilation system
• Pinlock Ready
• Full metallic micrometric buckle
• Multi-density inner polystyrene
• Optical polycarbonate, anti-scratch visor. Quick release function and locking system
• Pivoting visor mechanism
• Weight 1450g (+/- 50g)
• MT-V-14 visor, 2.2mm thickness

Note: Tinted visor pictured is available as an optional extra.

The perfect sport helmet, now with a new innovative pro spoiler. Excellent fit with attractive graphics and comfort fabrics used internally!

Features:

• HIRP Shell (High Impact Resistant Polymer) , 1 shell size. Aerodynamic design
• New innovative spoiler design
• Removable and Washable lining
• Anti-allergic fabrics
• Inner ventilation system
• Pinlock Ready
• Full metallic micrometric buckle
• Multi-density inner polystyrene
• Optical polycarbonate, anti-scratch visor. Quick release function and locking system
• Pivoting visor mechanism
• Weight 1450g (+/- 50g)
• MT-V-14 visor, 2.2mm thickness

The perfect sport helmet, now with a new innovative pro spoiler. Excellent fit with attractive graphics and comfort fabrics used internally!

Features:

• HIRP Shell (High Impact Resistant Polymer) , 1 shell size. Aerodynamic design
• New innovative spoiler design
• Removable and Washable lining
• Anti-allergic fabrics
• Inner ventilation system
• Pinlock Ready
• Full metallic micrometric buckle
• Multi-density inner polystyrene
• Optical polycarbonate, anti-scratch visor. Quick release function and locking system
• Pivoting visor mechanism
• Weight 1450g (+/- 50g)
• MT-V-14 visor, 2.2mm thickness

Note: Tinted visor pictured is available as an optional extra.

The perfect sport helmet, now with a new innovative pro spoiler. Excellent fit with attractive graphics and comfort fabrics used internally!

Features:

• HIRP Shell (High Impact Resistant Polymer) , 1 shell size. Aerodynamic design
• New innovative spoiler design
• Removable and Washable lining
• Anti-allergic fabrics
• Inner ventilation system
• Pinlock Ready
• Full metallic micrometric buckle
• Multi-density inner polystyrene
• Optical polycarbonate, anti-scratch visor. Quick release function and locking system
• Pivoting visor mechanism
• Weight 1450g (+/- 50g)
• MT-V-14 visor, 2.2mm thickness

The perfect sport helmet, now with a new innovative pro spoiler. Excellent fit with attractive graphics and comfort fabrics used internally!

Features:

• HIRP Shell (High Impact Resistant Polymer) , 1 shell size. Aerodynamic design
• New innovative spoiler design
• Removable and Washable lining
• Anti-allergic fabrics
• Inner ventilation system
• Pinlock Ready
• Full metallic micrometric buckle
• Multi-density inner polystyrene
• Optical polycarbonate, anti-scratch visor. Quick release function and locking system
• Pivoting visor mechanism
• Weight 1450g (+/- 50g)
• MT-V-14 visor, 2.2mm thickness

Note: Tinted visor pictured is available as an optional extra.

MT’s do-it-all go anywhere helmet. For the urban commute or the long tour, the new Thunder 3 SV will accommodate any ride you throw at it. A multi dimensional fit and available in 2 shell sizes, this helmet will comfortably fit most head shapes. Features an internal drop down visor and a Pinlock Max vision visor.

Features:

• 4/5 Star Sharp Rating
• Drop Down Inner Sun Visor
• Hi-Impact Absorption Inner Shell
• Multiple Density EPS Liner
• Optimum Visor Closing
• Homologated Front Protection “P”
• Quick Release Micrometric Buckle
• 2 Outer Shell Sizes
• Pinlock Max Vision Visor
• Removable And Washable Liner
• Optically Correct Anti Scratch Polycarbonate Visor
• Quick Release Visor
• Aerodynamic Design
• Vent System
• ECE/ONU.22.05.P
• NBR7471
• NTC 4533
• ACU Gold Standard
• Glow In The Dark Features
• MT-V-12 Pinlock Max visor

MT’s do-it-all go anywhere helmet. For the urban commute or the long tour, the new Thunder 3 SV will accommodate any ride you throw at it. A multi dimensional fit and available in 2 shell sizes, this helmet will comfortably fit most head shapes. Features an internal drop down visor and a Pinlock Max vision visor.

Features:

• 4/5 Star Sharp Rating
• Drop Down Inner Sun Visor
• Hi-Impact Absorption Inner Shell
• Multiple Density EPS Liner
• Optimum Visor Closing
• Homologated Front Protection “P”
• Quick Release Micrometric Buckle
• 2 Outer Shell Sizes
• Pinlock Max Vision Visor
• Removable And Washable Liner
• Optically Correct Anti Scratch Polycarbonate Visor
• Quick Release Visor
• Aerodynamic Design
• Vent System
• ECE/ONU.22.05.P
• NBR7471
• NTC 4533
• ACU Gold Standard
• Glow In The Dark Features
• MT-V-12 Pinlock Max visor

MT’s do-it-all go anywhere helmet. For the urban commute or the long tour, the new Thunder 3 SV will accommodate any ride you throw at it. A multi dimensional fit and available in 2 shell sizes, this helmet will comfortably fit most head shapes. Features an internal drop down visor and a Pinlock Max vision visor.

Features:

• 4/5 Star Sharp Rating
• Drop Down Inner Sun Visor
• Hi-Impact Absorption Inner Shell
• Multiple Density EPS Liner
• Optimum Visor Closing
• Homologated Front Protection “P”
• Quick Release Micrometric Buckle
• 2 Outer Shell Sizes
• Pinlock Max Vision Visor
• Removable And Washable Liner
• Optically Correct Anti Scratch Polycarbonate Visor
• Quick Release Visor
• Aerodynamic Design
• Vent System
• ECE/ONU.22.05.P
• NBR7471
• NTC 4533
• ACU Gold Standard
• Glow In The Dark Features
• MT-V-12 Pinlock Max visor

MT’s do-it-all go anywhere helmet. For the urban commute or the long tour, the new Thunder 3 SV will accommodate any ride you throw at it. A multi dimensional fit and available in 2 shell sizes, this helmet will comfortably fit most head shapes. Features an internal drop down visor and a Pinlock Max vision visor.

Features:

• 4/5 Star Sharp Rating
• Drop Down Inner Sun Visor
• Hi-Impact Absorption Inner Shell
• Multiple Density EPS Liner
• Optimum Visor Closing
• Homologated Front Protection “P”
• Quick Release Micrometric Buckle
• 2 Outer Shell Sizes
• Pinlock Max Vision Visor
• Removable And Washable Liner
• Optically Correct Anti Scratch Polycarbonate Visor
• Quick Release Visor
• Aerodynamic Design
• Vent System
• ECE/ONU.22.05.P
• NBR7471
• NTC 4533
• ACU Gold Standard
• Glow In The Dark Features
• MT-V-12 Pinlock Max visor

The perfect helmet for any use. This model has an excellent fitting and also attractive graphics. Special comfort fabrics.
Can be used like Snowmobile helmet with snow breathguard, snowmobile neck curtain and “double or electric lens”.

Features:

• Aerodynamic Shape
• Homologated Front Protection "P"
• Removable and Washable Pads
• Inner Shell with Hi-Impact Absortion
• Fire Retardant Fabric Lining
• Multiple Density Inner Shell
• Anti Scratch Visor in Optical Polycarbonate
• Quick Release Visor
• Optimum Visor Closing
• Pinlock Ready
• Metallic Quick Release Micrometric Buckle
• Weight 1450g
• MT-V-14 visor