BILTWELL

Our ECE-certified Gringo S boasts fit, finish and safety technology identical to its full-face sibling, but features a CE-certified flip-up face shield for added safety and riding comfort.

Features:

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad dissipates energy from frontal impacts
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• CE-certified polycarbonate shield includes anti-fog and anti-scratch treatments for safety and durability
• Rugged shield hinge hardware with robust detents allows you to open the shield at slow speeds for increased airflow 
• Molded recesses inside EPS designed to accept various aftermarket audio and communication components

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

Our ECE-certified Gringo S boasts fit, finish and safety technology identical to its full-face sibling, but features a CE-certified flip-up face shield for added safety and riding comfort.

Features:

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad dissipates energy from frontal impacts
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• CE-certified polycarbonate shield includes anti-fog and anti-scratch treatments for safety and durability
• Rugged shield hinge hardware with robust detents allows you to open the shield at slow speeds for increased airflow 
• Molded recesses inside EPS designed to accept various aftermarket audio and communication components

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

Our ECE-certified Gringo S boasts fit, finish and safety technology identical to its full-face sibling, but features a CE-certified flip-up face shield for added safety and riding comfort.

Features:

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad dissipates energy from frontal impacts
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• CE-certified polycarbonate shield includes anti-fog and anti-scratch treatments for safety and durability
• Rugged shield hinge hardware with robust detents allows you to open the shield at slow speeds for increased airflow 
• Molded recesses inside EPS designed to accept various aftermarket audio and communication components

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

Our ECE-certified Gringo S boasts fit, finish and safety technology identical to its full-face sibling, but features a CE-certified flip-up face shield for added safety and riding comfort.

Features:

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad dissipates energy from frontal impacts
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• CE-certified polycarbonate shield includes anti-fog and anti-scratch treatments for safety and durability
• Rugged shield hinge hardware with robust detents allows you to open the shield at slow speeds for increased airflow 
• Molded recesses inside EPS designed to accept various aftermarket audio and communication components

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

Gringo SV takes the classic motorcycle aesthetic we re-energized ten years ago in a bold new direction. The result is a helmet with world-class comfort, function, and style.

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• Evolutionary Gringo S shell styling features front, side, and rear vent ports to improve interior airflow, moisture dissipation, and cooling
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Adjustable vents above the eye port let you regulate internal airflow to cool and dry your head
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• ECE R22.06 certified / US DOT FMVSS No. 218 compliant

Fitment:

Our new ECE 22.06 compliant helmets now come in three shell sizes as compared to the 22.05 model which used only two shells. This means the fit is more accurate and comfortable, especially in the Medium and XXL sizes. Please note the measurements in our revised sizing chart before ordering a new helmet in the same size as your current model.

Note: the new Gringo SV will not work with the old Gringo S visors because the closure has been improved.

Gringo takes its '60s motorsport aesthetic and elevates it to modern ECE R22.05 motorcycle standards—the European test protocol recognized by leading helmet makers and independent safety labs as the toughest in the world.

Features:

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad dissipates energy during frontal impacts
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Molded recesses inside EPS designed to accept various aftermarket audio and communication components
• ECE R22.05 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

Gringo takes its '60s motorsport aesthetic and elevates it to modern ECE R22.05 motorcycle standards—the European test protocol recognized by leading helmet makers and independent safety labs as the toughest in the world.

Features:

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad dissipates energy during frontal impacts
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Molded recesses inside EPS designed to accept various aftermarket audio and communication components
• ECE R22.05 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

Gringo takes its '60s motorsport aesthetic and elevates it to modern ECE R22.05 motorcycle standards—the European test protocol recognized by leading helmet makers and independent safety labs as the toughest in the world.

Features:

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad dissipates energy during frontal impacts
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Molded recesses inside EPS designed to accept various aftermarket audio and communication components
• ECE R22.05 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

Gringo takes its '60s motorsport aesthetic and elevates it to modern ECE R22.05 motorcycle standards—the European test protocol recognized by leading helmet makers and independent safety labs as the toughest in the world.

Features:

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad dissipates energy during frontal impacts
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Molded recesses inside EPS designed to accept various aftermarket audio and communication components
• ECE R22.05 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

Gringo takes its '60s motorsport aesthetic and elevates it to modern ECE R22.05 motorcycle standards—the European test protocol recognized by leading helmet makers and independent safety labs as the toughest in the world.

Features:

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad dissipates energy during frontal impacts
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Molded recesses inside EPS designed to accept various aftermarket audio and communication components
• ECE R22.05 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

Gringo takes its '60s motorsport aesthetic and elevates it to modern ECE R22.05 motorcycle standards—the European test protocol recognized by leading helmet makers and independent safety labs as the toughest in the world.

Features:

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad dissipates energy during frontal impacts
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Molded recesses inside EPS designed to accept various aftermarket audio and communication components
• ECE R22.05 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

Progressively styled and rigorously tested, our ECE-certified helmet is a top choice for riders who demand comfort and high performance. Features include a rugged ABS outer shell, ventilated EPS safety liner, replaceable comfort liner and a clear anti-fog shield.

Features:

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad features front and side vents for airflow
• CE-certified polycarbonate shield includes anti-fog and anti-scratch treatments for safety and durability
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Molded recesses inside EPS interior shell accept select aftermarket audio and communication components
• Rugged shield hinge hardware with robust detents allows you to open the shield at slow speeds for increased airflow

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

Progressively styled and rigorously tested, our ECE-certified helmet is a top choice for riders who demand comfort and high performance. Features include a rugged ABS outer shell, ventilated EPS safety liner, replaceable comfort liner and a clear anti-fog shield.

Features:

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad features front and side vents for airflow
• CE-certified polycarbonate shield includes anti-fog and anti-scratch treatments for safety and durability
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Molded recesses inside EPS interior shell accept select aftermarket audio and communication components
• Rugged shield hinge hardware with robust detents allows you to open the shield at slow speeds for increased airflow

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

Progressively styled and rigorously tested, our ECE-certified helmet is a top choice for riders who demand comfort and high performance. Features include a rugged ABS outer shell, ventilated EPS safety liner, replaceable comfort liner and a clear anti-fog shield.

Features:

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad features front and side vents for airflow
• CE-certified polycarbonate shield includes anti-fog and anti-scratch treatments for safety and durability
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Molded recesses inside EPS interior shell accept select aftermarket audio and communication components
• Rugged shield hinge hardware with robust detents allows you to open the shield at slow speeds for increased airflow

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

Progressively styled and rigorously tested, our ECE-certified helmet is a top choice for riders who demand comfort and high performance. Features include a rugged ABS outer shell, ventilated EPS safety liner, replaceable comfort liner and a clear anti-fog shield.

Features:

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad features front and side vents for airflow
• CE-certified polycarbonate shield includes anti-fog and anti-scratch treatments for safety and durability
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Molded recesses inside EPS interior shell accept select aftermarket audio and communication components
• Rugged shield hinge hardware with robust detents allows you to open the shield at slow speeds for increased airflow

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

Progressively styled and rigorously tested, our ECE-certified helmet is a top choice for riders who demand comfort and high performance. Features include a rugged ABS outer shell, ventilated EPS safety liner, replaceable comfort liner and a clear anti-fog shield.

Features:

• Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad features front and side vents for airflow
• CE-certified polycarbonate shield includes anti-fog and anti-scratch treatments for safety and durability
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Molded recesses inside EPS interior shell accept select aftermarket audio and communication components
• Rugged shield hinge hardware with robust detents allows you to open the shield at slow speeds for increased airflow

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

An old favorite but now with a new fit and new features. Our latest Gringo S helmet now meets the new European ECE 22.06 regs. The shield mechanism now uses the same anti-rattle closure featured on our Lane Splitter helmets. Three shell sizes replace the previous two for improved fit and comfort.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved. We will have replacement shields in different tints available soon!

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

An old favorite but now with a new fit and new features. Our latest Gringo S helmet now meets the new European ECE 22.06 regs. The shield mechanism now uses the same anti-rattle closure featured on our Lane Splitter helmets. Three shell sizes replace the previous two for improved fit and comfort.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved. We will have replacement shields in different tints available soon!

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.

An old favorite but now with a new fit and new features. Our latest Gringo S helmet now meets the new European ECE 22.06 regs. The shield mechanism now uses the same anti-rattle closure featured on our Lane Splitter helmets. Three shell sizes replace the previous two for improved fit and comfort.

Note: The new R22.06 Gringo S will not work with the old Gringo S shields because the closure has been improved. We will have replacement shields in different tints available soon!

Features:

• Injection-molded ABS outer shell is lightweight and highly resistant to impacts
• New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
• Molded urethane chin bar pad dissipates energy during front impact
• Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
• CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
• Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
• Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
• Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
• New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
• Molded EPS ear pockets fit select aftermarket audio accessories
• US DOT FMVSS No. 218 compliant / ECE R22.06 certified

Fitment:

Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. We offer accessory cheek pads so you can fine-tune the tightness of your helmet around your jaw and face.