All

We offer removable cheek pads for our ECE-certified R22.05 Gringo and Gringo S helmets so you can replace old, dirty ones or fine-tune comfort with a thinner or thicker set depending on your preference.

Note: These cheek pads will not work with the new ECE R22.06 Gringo S or Gringo SV helmets. We will have replacement cheek pads for the new ECE R22.06 Gringo S and Gringo SV available soon! 

Features:

• Brushed fleece Lycra material wicks sweat from skin for greater comfort
• Open-cell foam inside pads increases airflow and accelerates drying
• Stainless-steel snaps on ABS plastic pad backing for speedy removal and installation
• Hand-stitched construction
• Available in different thicknesses for a custom fit—see chart in photos
• Sold in pairs

Care & Maintenance:

Never clean helmet comfort liner components in the washer or dryer. Instead, simply immerse them in soapy water and gently squeeze them to release dirt and oils. To dry, loosely wrap the wet pads in a plush towel and gently squeeze them to absorb excess moisture, then hang them to air dry. Wait 24 hours before reinstalling clean pads in your helmet.

Our laser-cut plastic flex shield covers the eye port on ECE-certified Gringo helmets to protect you from the elements.

Features:

• Polycarbonate plastic material resists impacts from flying road debris
• Five nickel-plates stainless-steel snaps attach the shield over Gringo eye port
• Fits XS-XXL ECE-certified Gringo helmets
• Clear, Smoke and Chrome tints available
• Provides 91% UV/A and 99% UV/B light resistance based on AATCC-138 test standard
• This shield is not anti-fog coated, but you can apply your own aftermarket anti-fog spray of choice

Care & Maintenance:

Easy to install in a snap by fastening it to the five snaps around the eye port on your Gringo helmet. Removes quickly for storage or cleaning. Use mild soapy water and a microfiber cloth only for cleaning. DO NOT put harsh household or petroleum-based chemicals on the shield as damage will occur. Apply a drop of standard light household oil inside each snap before installation to make reduce oxidation and make removal easier.

We offer removable cheek pads for our ECE-certified R22.06 Gringo, Gringo S, and Gringo SV helmets so you can replace old, dirty ones or fine-tune comfort with a thinner or thicker set depending on your preference.

Note: This cheek pad set will fit all ECE Gringo, Gringo S, and Gringo SV helmets but use a different color mesh than the previous ECE 22.05 cheek pads.

Features:

• Brushed fleece Lycra material wicks sweat from skin for greater comfort
• Open-cell foam inside pads increases airflow and accelerates drying
• Stainless-steel snaps on ABS plastic pad backing for speedy removal and installation
• Hand-stitched construction
• Available in different thicknesses for a custom fit—see chart in photos
• Sold in pairs

Care & Maintenance:

Never clean helmet comfort liner components in the washer or dryer. Instead, simply immerse them in soapy water and gently squeeze them to release dirt and oils. To dry, loosely wrap the wet pads in a plush towel and gently squeeze them to absorb excess moisture, then hang them to air dry. Wait 24 hours before reinstalling clean pads in your helmet.

Aesthetically vintage and optically precise, our highly scratch-and impact-resistant polycarbonate bubble visors fit helmets with three snaps across the brow, and come in a number of colours and reflective coatings.

Features:

• Injection-molded scratch- and impact-resistant polycarbonate thermoplastic construction
• Plated stainless-steel snaps fasten securely to snaps on helmet brow for easy installation
• Coloured shields feature in-molded tint technology
• Mirrored shields feature reflective technology in a variety of surface finishes to reduce glare
• Every shield color and style provides 91% UV/A and 99% UV/B light resistance based on AATCC-138 test standard
• Anti-fog treatment on shield interior fights moisture build-up from breathing and humidity

Care & Maintenance:

Bubble shields from the plastic industry's glory days in the '60s were an instant hit with the hip chopper crowd, and have remained a popular safe-riding essential in modern times, thanks to advancements in polycarbonate technology and mold-making. Biltwell bubble visor are a snap to install, if you start with the center snap and move outward. To clean your visor, use mild soapy water solution and a microfiber cloth to loosen bugs and road debris, then dry it with a second clean microfiber towel. Never use harsh household or petroleum-based chemicals to clean your bubble shield, especially on the inside, as they can destroy the shield's special coatings.

Aesthetically vintage and optically precise, our highly scratch-and impact-resistant polycarbonate bubble visors fit helmets with three snaps across the brow, and come in a number of colours and reflective coatings.

Features:

• Injection-molded scratch- and impact-resistant polycarbonate thermoplastic construction
• Plated stainless-steel snaps fasten securely to snaps on helmet brow for easy installation
• Coloured shields feature in-molded tint technology
• Mirrored shields feature reflective technology in a variety of surface finishes to reduce glare
• Every shield color and style provides 91% UV/A and 99% UV/B light resistance based on AATCC-138 test standard
• Anti-fog treatment on shield interior fights moisture build-up from breathing and humidity

Care & Maintenance:

Bubble shields from the plastic industry's glory days in the '60s were an instant hit with the hip chopper crowd, and have remained a popular safe-riding essential in modern times, thanks to advancements in polycarbonate technology and mold-making. Biltwell bubble visor are a snap to install, if you start with the center snap and move outward. To clean your visor, use mild soapy water solution and a microfiber cloth to loosen bugs and road debris, then dry it with a second clean microfiber towel. Never use harsh household or petroleum-based chemicals to clean your bubble shield, especially on the inside, as they can destroy the shield's special coatings.

Aesthetically vintage and optically precise, our highly scratch-and impact-resistant polycarbonate bubble visors fit helmets with three snaps across the brow, and come in a number of colours and reflective coatings.

Features:

• Injection-molded scratch- and impact-resistant polycarbonate thermoplastic construction
• Plated stainless-steel snaps fasten securely to snaps on helmet brow for easy installation
• Coloured shields feature in-molded tint technology
• Mirrored shields feature reflective technology in a variety of surface finishes to reduce glare
• Every shield color and style provides 91% UV/A and 99% UV/B light resistance based on AATCC-138 test standard
• Anti-fog treatment on shield interior fights moisture build-up from breathing and humidity

Care & Maintenance:

Bubble shields from the plastic industry's glory days in the '60s were an instant hit with the hip chopper crowd, and have remained a popular safe-riding essential in modern times, thanks to advancements in polycarbonate technology and mold-making. Biltwell bubble visor are a snap to install, if you start with the center snap and move outward. To clean your visor, use mild soapy water solution and a microfiber cloth to loosen bugs and road debris, then dry it with a second clean microfiber towel. Never use harsh household or petroleum-based chemicals to clean your bubble shield, especially on the inside, as they can destroy the shield's special coatings.

Aesthetically vintage and optically precise, our highly scratch-and impact-resistant polycarbonate bubble visors fit helmets with three snaps across the brow, and come in a number of colours and reflective coatings.

Features:

• Injection-molded scratch- and impact-resistant polycarbonate thermoplastic construction
• Plated stainless-steel snaps fasten securely to snaps on helmet brow for easy installation
• Coloured shields feature in-molded tint technology
• Mirrored shields feature reflective technology in a variety of surface finishes to reduce glare
• Every shield color and style provides 91% UV/A and 99% UV/B light resistance based on AATCC-138 test standard
• Anti-fog treatment on shield interior fights moisture build-up from breathing and humidity

Care & Maintenance:

Bubble shields from the plastic industry's glory days in the '60s were an instant hit with the hip chopper crowd, and have remained a popular safe-riding essential in modern times, thanks to advancements in polycarbonate technology and mold-making. Biltwell bubble visor are a snap to install, if you start with the center snap and move outward. To clean your visor, use mild soapy water solution and a microfiber cloth to loosen bugs and road debris, then dry it with a second clean microfiber towel. Never use harsh household or petroleum-based chemicals to clean your bubble shield, especially on the inside, as they can destroy the shield's special coatings.

Aesthetically vintage and optically precise, our highly scratch-and impact-resistant polycarbonate bubble visors fit helmets with three snaps across the brow, and come in a number of colours and reflective coatings.

Features:

• Injection-molded scratch- and impact-resistant polycarbonate thermoplastic construction
• Plated stainless-steel snaps fasten securely to snaps on helmet brow for easy installation
• Coloured shields feature in-molded tint technology
• Mirrored shields feature reflective technology in a variety of surface finishes to reduce glare
• Every shield color and style provides 91% UV/A and 99% UV/B light resistance based on AATCC-138 test standard
• Anti-fog treatment on shield interior fights moisture build-up from breathing and humidity

Care & Maintenance:

Bubble shields from the plastic industry's glory days in the '60s were an instant hit with the hip chopper crowd, and have remained a popular safe-riding essential in modern times, thanks to advancements in polycarbonate technology and mold-making. Biltwell bubble visor are a snap to install, if you start with the center snap and move outward. To clean your visor, use mild soapy water solution and a microfiber cloth to loosen bugs and road debris, then dry it with a second clean microfiber towel. Never use harsh household or petroleum-based chemicals to clean your bubble shield, especially on the inside, as they can destroy the shield's special coatings.

Our modern take on the track-tested MX classic features a short bill to keep the sun out of your eyes and tapered sides for a look that would make Steve McQueen proud.

Features:

• Injection-molded polycarbonate thermoplastic construction
• Vivid in-mold colours
• Three heavy-duty, nickel-plated stainless-steel snaps
• Fits all Biltwell and many other helmets with three snaps on the brow

Care & Maintenance:

Start with the centre snap first, then work your way to the outside. Use mild soapy water and a microfiber cloth to clean your Moto Visor. DO NOT expose the visor to harsh household or petroleum-based chemicals—doing so can damage the surface finish and/or compromise material strength.

Our modern take on the track-tested MX classic features a short bill to keep the sun out of your eyes and tapered sides for a look that would make Steve McQueen proud.

Features:

• Injection-molded polycarbonate thermoplastic construction
• Vivid in-mold colours
• Three heavy-duty, nickel-plated stainless-steel snaps
• Fits all Biltwell and many other helmets with three snaps on the brow

Care & Maintenance:

Start with the centre snap first, then work your way to the outside. Use mild soapy water and a microfiber cloth to clean your Moto Visor. DO NOT expose the visor to harsh household or petroleum-based chemicals—doing so can damage the surface finish and/or compromise material strength.

Our modern take on the track-tested MX classic features a short bill to keep the sun out of your eyes and tapered sides for a look that would make Steve McQueen proud.

Features:

• Injection-molded polycarbonate thermoplastic construction
• Vivid in-mold colours
• Three heavy-duty, nickel-plated stainless-steel snaps
• Fits all Biltwell and many other helmets with three snaps on the brow

Care & Maintenance:

Start with the centre snap first, then work your way to the outside. Use mild soapy water and a microfiber cloth to clean your Moto Visor. DO NOT expose the visor to harsh household or petroleum-based chemicals—doing so can damage the surface finish and/or compromise material strength.