All

Easy mounting. Protects the tank from scratches normally caused by belts, zips, button. Water and UV-proof.

Easy mounting. Protects the tank from scratches normally caused by belts, zips, button. Water and UV-proof.

Easy mounting. Protects the tank from scratches normally caused by belts, zips, button. Water and UV-proof.

40 mm diameter. Max pressure 4,2 bar / 60 psi.

• Create an ultra-strong and safe anchorage point for your motorbike.
• Hardened steel made with reinforced welds.
• Equipped with plastic protective cover.
• Equipped with 4 special rawlplugs with anti-theft balls for ground fixing

• Smartphone holder with mirror or windshield mount
• Fully adjustable to improve the viewing angle.
• Rubberized antislip and antiscratch inserts.
• Safety cable included
• Recharge cable entry hole.
• Front film with heat sealing to increase water resistance.
• Rainproof side zips.
• Internal card pockets.
• Compatible with tubes Ø 9-14 mm

• Smartphone holder with mirror or windshield mount
• Enables the phone’s ventilation in order to reduce overheating
• For smartphones from 130 to 190 mm in height
• Fully adjustable to improve the viewing angle
• Rubberized antislip and antiscratch inserts
• Safety cable included
• Compatible with tubes Ø 9-14 mm

Ø 4 mm elastic net with anti-pull
PP covering. Six adjustable
hooks (Ø 3 mm), dimensions 42x42 cm

Improve the stability of the motorcycle and reduce vibrations on the handlebar. Made of anodised aluminum. One piece construction
Ø 17 / 23 mm fitting.

Improve the stability of the motorcycle and reduce vibrations on the handlebar. Made of anodised aluminum. One piece construction
Ø 17 / 23 mm fitting.

High elasticity, lightness and comfort provided by the special polyester fibers technical fabric that cleans the skin from the sweat and regulates the inside temperature. Ideal for cold seasons.

Elastic corset-band with hard inserts to hold your back during long trips. With soft inner lining.

• Keeps helmet or transported objects firmly on the rack or on the tank
• One piece construction NET without any sewing or knots
• Strong nylon fibre net with latex core
• With reinforced hems

Clear lens, approved. Cables with quick–fit connectors

Improve the stability of the motorcycle and reduce vibrations on the handlebar.
Made of anodised aluminum. One piece construction

Note: For handlebar with internal Ø 17 / 23 mm

• Allows to charge your device even in bad weather conditions.
• ULTRA FAST CHARGE 5400 mA 12/24V
• Completely water resistant thanks to ultrasonic sealing and protective membrane on the USB ports.
• Screws or 3M™ double-sided tape fixing (included).
• Intelligent self-regene rating fuse.
• 150 cm electrical wiring with fork terminals.
• Smart chip: for a safe and fast recharge.
• Short circuit, overheat, overload and overvoltage protection

• ULTRA FAST CHARGE 5400 mA 12/24V
• Allows to charge your device even in bad weather conditions.
• Completely water resistant thanks to ultrasonic sealing and protective membrane on the USB ports.
• Suitable for handlebars with diameter from 21 to 32 mm.
• Anti-scratch rubber adapter that can be cut to fit.
• Intelligent self-regenerating fuse.
• 150 cm electrical wiring with fork terminals.
• Smart chip: for a safe and fast recharge.
• Short circuit, overheat, overload and overvoltage protection

Waterproof PEVA. Protects your motorcycle from rain, sun, snow, dust, birds pollution, tree droppings etc..
Weld sewings.
Elasticized front and rear hem.
Pouch included

Waterproof PEVA. Protects your motorcycle from rain, sun, snow, dust, birds pollution, tree droppings etc..
Weld sewings.
Elasticized front and rear hem.
Pouch included

• Amber light
• White light for position
• Cables with quick-fit connectors
• Gummed overhang
• High vibration resistance
• E approved

• Amber light
• Red light for position/stop
• Cables with quick-fit connectors
• Gummed overhang
• High vibration resistance
• E approved

With self-locking function and anti-scratch nylon cover.
10 mm square section. 3 keys included

PVC 500D Tarpaulin, high frequency welded, seamless
• Roll top closure system to ensure waterproofness
• Handle for carrying by hand and shoulder strap
• Equipped with attachments for fastening to the motorcycle by means of straps (included)
• Convenient front zip with reflective piping to access a small inside pocket

• Waterproof coated PVC.
• Non-slip rubber sole.
• Elasticized upper closure.
• Reflective insert.
• Easy-fit thanks to zip closure.
• Taped sewing

• Small - Euro 39-39
• Medium - Euro 40-41
• Large - Euro 42-43

Aluminium material. Adjustable angle. Weight 250 grams. Ready-made for corner lights and licence plate lamp.

High-tensile, 3x stronger than conventional cords. 4 mm coated steel hooks, won’t bend, break, scratch or mark

Life vest certified by standard EN1150.
High visibility material with reflective trims.
Tight-fit thanks to stretch sections to fit onto jacket. No flapping while biking.
2 zip pockets. 1 front zip

• Large - Height 177-181 cm - Chest 112-122 cm
• XL - Height 182-188 cm - Chest 118-128 cm
• 2XL - Height 188-200 cm - Chest 124-134 cm
• 3XL - Height 188-200 cm - Chest 130-140 cm

Approved. Amber light. Cables with quick-fit connectors. Rubberized overhang and crack-proof joint. 

Suitable to fix on handlebars Ø 15 to 40 mm. Fully adjustable, allows the use of the smartphone vertically and horizontally. Specific for Optiline accessories

• Completely adjustable for a better viewing angle.
• Enables the phone’s ventilation.
• Compatible with devices 125-180 mm height.
• Safety cable included.
• Rubberized antislip and antiscratch inserts.
• Safety silicon strap.
• Do esn’t obstruct recharge port
• Compatible with all Optiline mounts.
• Duolock quick fixing/release system 

Note: Maximum inner measures 82x180 mm

Compatible with all Optiline Titan mounts and 19 mm balls (mount not included)

• Follows the shape of the phone as much as possible, reduced thickness to make it less bulky
• Recharge cable entry hole
• Transparent front film to allow the use of the touch screen, fixed by heat-sealing to increase resistance to rain
• Rain resistant side zips
• Internal card pockets
• Compatible with all Optiline mounts
• Duolock quick fixing/release system 

Note: Maximum inner measures 80x165 mm

• Follows the shape of the phone as much as possible, reduced thickness to make it less bulky
• Recharge cable entry hole
• Transparent front film to allow the use of the touch screen, fixed by heat-sealing to increase resistance to rain
• Rain resistant side zips
• Internal card pockets
• Compatible with all Optiline mounts
• Duolock quick fixing/release system 

Note: Maximum inner measures 70x145 mm

• Follows the shape of the phone as much as possible, reduced thickness to make it less bulky
• Recharge cable entry hole
• Transparent front film to allow the use of the touch screen, fixed by heat-sealing to increase resistance to rain
• Rain resistant side zips
• Internal card pockets
• Compatible with all Optiline mounts
• Duolock quick fixing/release system 

Note: Maximum inner measures 90x175 mm

• Replacement plate to restore Optiline cases
• Conversion plate to adapt cases from other brands (with 3 screw mount) with Duolock mount systems

Universal for handlebars from Ø 16 to 32 mm. Heavy duty nylon. Fully adjustable: allows the use of the accessories vertically and horizontally. Duo-Lock 2.0 system: easy and quick fixing. Compatible with all Optiline accessories and cases.

• Doesn’t obstruct the side buttons function.
• Recharge cable entry hole.
• Inner silicon antiscratch mat.
• Front transparent screen protector which doesn’t affect the touch functions.
• Safety strap included.
• Compatible with all O ptiline mounts.
• Duolock quick fixing/release system

• Doesn’t obstruct the side buttons function.
• Recharge cable entry hole.
• Inner silicon antiscratch mat.
• Front transparent screen protector which doesn’t affect the touch functions.
• Safety strap included.
• Compatible with all O ptiline mounts.
• Duolock quick fixing/release system

• Doesn’t obstruct the buttons and camera functions.
• Recharge cable entry hole.
• Inner silicon antiscratch mat.
• Front transparent screen protector which doesn’t affect the touch functions.
• Safety strap included.
• Compatible wit h all Optiline mounts.
• Duolock quick fixing/release system

• Doesn’t obstruct the buttons and camera functions.
• Recharge cable entry hole.
• Inner silicon antiscratch mat.
• Front transparent screen protector which doesn’t affect the touch functions.
• Safety strap included.
• Compatible wit h all Optiline mounts.
• Duolock quick fixing/release system

The DuoLock twist-to-lock system is compatible with all Optiline holders.
The ring made up of 34 magnets makes mounting your phone faster to the MAG series of mounts and accessories. Place your phone close to the holder and the magnets will do the rest.
• Edge-to-edge coverage and reinforced corners to increase impact resistance.
• Safety strap included.
• Perfect compatibility with all MAG phone holders/accessories and Duolock attachments

The DuoLock twist-to-lock system is compatible with all Optiline holders.
The ring made up of 34 magnets makes mounting your phone faster to the MAG series of mounts and accessories. Place your phone close to the holder and the magnets will do the rest.
• Edge-to-edge coverage and reinforced corners to increase impact resistance.
• Safety strap included.
• Perfect compatibility with all MAG phone holders/accessories and Duolock attachments