All

Modular helmet wearers, rejoice! The AGV Sport Modular Carbon Helmet is here and ready to lay down those miles with you. Built with the AGV Pista GP R in mind, the Sportmodular has the same protection and lightweight construction. The helmet liner is two-sided and reversible, so you can pick the best level of comfort depending on the weather. The GT3 visor is prepared for the Pinlock 120 insert lens, which is race-level anti-fogging at your fingertips. Metal hardware at the chin bar closes the bar securely. Swap out the visor effortlessly with no tool required.

FIT: The AGV Sportmodular Carbon Helmet fits tight around the jaw and cheek, not unlike a full-face sport helmet. We have found this helmet to run slightly small, please size up if between sizes.

Features:

• 100% carbon fibre shell
• 3 shell sizes (XS-SM, MD-LG, XL-3XL)
• 5-density EPS in 4 sizes
• 100% carbon fibre chin bar engineered to guarantee maximum lightweight and balance even in the open configuration
• Shell shape designed to minimize the risk of impact energies being channeled to the collar bone
• Metal chin guard opening system designed to prevent accidental openings
• IVS (Integrated Ventilation System) with a large front vent, a chin guard vent and a rear extractor hollowed in the shell which directs air to the rider’s head without interference with the internal sun shield
• Internal chin channels distribute the air flow evenly through the entire shield surface
• Adjustable integrated spoiler reduces turbulence and maximizes stability
• Pressure-free interior fit
• Removable nose guard and wind protector
• Reversible crown pad features a double face use that allows the rider to select the preferred feel and climate: warmer side with Shalimar fabric for a soft and gentle touch and a cooler side with Ritmo fabric
• Neck roll made from Shalimar and Nabuk fabric with water resistant treatment prevents water from being channeled inside the helmet
• Cheek pads made from Ritmo fabric with Sanitized (antibacterial protection), 2Dry (moisture wicking) and Microsense (premium skin comfort and wearing fluidity) treatments
• Eyeglasses friendly
• Face shield prepared for 100% Max Vision Pinlock (120) anti-fog technology designed for maximum vertical view (85°) and unmatched horizontal view (190°)
• Pinlock insert lens included
• GT3 visor is anti-scratch and is in 2 sizes to optimize the correct fit between visor and shell in any size and to reduce air drafts and noise
• Integrated anti-scratch inner sun shield is removable without using tools and uses 2 sizes
• Visor Lock System (VLS) reduces the risk of accidental openings
• Metal face shield mechanism designed to minimize surface area, therefore supporting peripheral view and impact performance
• Rapid visor release system requires no tools and allows it to be removed and replaced in seconds
• Titanium Double D retention system (43% lighter than standard steel DD)
• Internal sun shield in light smoke
• DOT/ECE

Modular helmet wearers, rejoice! The AGV Sport Modular Carbon Helmet is here and ready to lay down those miles with you. Built with the AGV Pista GP R in mind, the Sportmodular has the same protection and lightweight construction. The helmet liner is two-sided and reversible, so you can pick the best level of comfort depending on the weather. The GT3 visor is prepared for the Pinlock 120 insert lens, which is race-level anti-fogging at your fingertips. Metal hardware at the chin bar closes the bar securely. Swap out the visor effortlessly with no tool required.

FIT: The AGV Sportmodular Carbon Helmet fits tight around the jaw and cheek, not unlike a full-face sport helmet. We have found this helmet to run slightly small, please size up if between sizes.

Features:

• 100% carbon fibre shell
• 3 shell sizes (XS-SM, MD-LG, XL-3XL)
• 5-density EPS in 4 sizes
• 100% carbon fibre chin bar engineered to guarantee maximum lightweight and balance even in the open configuration
• Shell shape designed to minimize the risk of impact energies being channeled to the collar bone
• Metal chin guard opening system designed to prevent accidental openings
• IVS (Integrated Ventilation System) with a large front vent, a chin guard vent and a rear extractor hollowed in the shell which directs air to the rider’s head without interference with the internal sun shield
• Internal chin channels distribute the air flow evenly through the entire shield surface
• Adjustable integrated spoiler reduces turbulence and maximizes stability
• Pressure-free interior fit
• Removable nose guard and wind protector
• Reversible crown pad features a double face use that allows the rider to select the preferred feel and climate: warmer side with Shalimar fabric for a soft and gentle touch and a cooler side with Ritmo fabric
• Neck roll made from Shalimar and Nabuk fabric with water resistant treatment prevents water from being channeled inside the helmet
• Cheek pads made from Ritmo fabric with Sanitized (antibacterial protection), 2Dry (moisture wicking) and Microsense (premium skin comfort and wearing fluidity) treatments
• Eyeglasses friendly
• Face shield prepared for 100% Max Vision Pinlock (120) anti-fog technology designed for maximum vertical view (85°) and unmatched horizontal view (190°)
• Pinlock insert lens included
• GT3 visor is anti-scratch and is in 2 sizes to optimize the correct fit between visor and shell in any size and to reduce air drafts and noise
• Integrated anti-scratch inner sun shield is removable without using tools and uses 2 sizes
• Visor Lock System (VLS) reduces the risk of accidental openings
• Metal face shield mechanism designed to minimize surface area, therefore supporting peripheral view and impact performance
• Rapid visor release system requires no tools and allows it to be removed and replaced in seconds
• Titanium Double D retention system (43% lighter than standard steel DD)
• Internal sun shield in light smoke
• DOT/ECE

Street 8 scratch resistant, Max Pinlock ready visor. Compatible with: AGV K3 and K4 helmets (Not K3 SV).

The new Streetmodular is homologated according to the new ECE 22.06 regulation and the dual P/J homologation. The Streetmodular has been designed to tackle long trips with maximum comfort and safety. Outer shell made of High Resistance Thermoplastic. It also has an integrated sun visor, as well as an efficient integrated ventilation system.

Technical Features:

• Available in 2 exterior sizes to adjust to the physical complexion of each rider. The interior incorporates a multi density EPS (internal structure) with 3 sizes of inner EPS.
• Metal chin guard opening mechanism that prevents accidental opening. The metal chin guard locking system ensures dual P/J homologation.
• The shape of the helmet has been designed to minimize the risk of the energy generated by an eventual impact being transmitted to the collarbone area.
• The ventilation system is made up of 2 air inlets in the front area and 1 rear extractor.
• The interior has been designed to offer a stable, enveloping and pressure-free fit to minimize noise inside the helmet, as well as maximum comfort. It has Sanitized treatment (antibacterial), DrySpeed (for excellent moisture absorption).
• Embracing Neck Profile roll for added comfort and protection.
• The interior is completely removable and washable.
• Side padding design optimized for glasses wearers.
• The new optical class 1 anti-scratch visor has been designed to offer a 190 degrees of horizontal vision. Includes a Pinlock (70). The screen is up to 4mm thick for added security.
• It has a micro-opening system for the screen.
• Integrated sun visor with anti-scratch treatment; easily removable without tools.
• The screen incorporates a patented closing system (VLS) that prevents its accidental opening.
• Chin cover included.
• Ready for generic communication systems.
• Micrometric closure system.
• It has P/J homologation to circulate in total safety both with the helmet closed in full-face mode and with the helmet open in jet mode.

The new Streetmodular is homologated according to the new ECE 22.06 regulation and the dual P/J homologation. The Streetmodular has been designed to tackle long trips with maximum comfort and safety. Outer shell made of High Resistance Thermoplastic. It also has an integrated sun visor, as well as an efficient integrated ventilation system.

Technical Features:

• Available in 2 exterior sizes to adjust to the physical complexion of each rider. The interior incorporates a multi density EPS (internal structure) with 3 sizes of inner EPS.
• Metal chin guard opening mechanism that prevents accidental opening. The metal chin guard locking system ensures dual P/J homologation.
• The shape of the helmet has been designed to minimize the risk of the energy generated by an eventual impact being transmitted to the collarbone area.
• The ventilation system is made up of 2 air inlets in the front area and 1 rear extractor.
• The interior has been designed to offer a stable, enveloping and pressure-free fit to minimize noise inside the helmet, as well as maximum comfort. It has Sanitized treatment (antibacterial), DrySpeed (for excellent moisture absorption).
• Embracing Neck Profile roll for added comfort and protection.
• The interior is completely removable and washable.
• Side padding design optimized for glasses wearers.
• The new optical class 1 anti-scratch visor has been designed to offer a 190 degrees of horizontal vision. Includes a Pinlock (70). The screen is up to 4mm thick for added security.
• It has a micro-opening system for the screen.
• Integrated sun visor with anti-scratch treatment; easily removable without tools.
• The screen incorporates a patented closing system (VLS) that prevents its accidental opening.
• Chin cover included.
• Ready for generic communication systems.
• Micrometric closure system.
• It has P/J homologation to circulate in total safety both with the helmet closed in full-face mode and with the helmet open in jet mode.

The new Streetmodular is homologated according to the new ECE 22.06 regulation and the dual P/J homologation. The Streetmodular has been designed to tackle long trips with maximum comfort and safety. Outer shell made of High Resistance Thermoplastic. It also has an integrated sun visor, as well as an efficient integrated ventilation system.

Technical Features:

• Available in 2 exterior sizes to adjust to the physical complexion of each rider. The interior incorporates a multi density EPS (internal structure) with 3 sizes of inner EPS.
• Metal chin guard opening mechanism that prevents accidental opening. The metal chin guard locking system ensures dual P/J homologation.
• The shape of the helmet has been designed to minimize the risk of the energy generated by an eventual impact being transmitted to the collarbone area.
• The ventilation system is made up of 2 air inlets in the front area and 1 rear extractor.
• The interior has been designed to offer a stable, enveloping and pressure-free fit to minimize noise inside the helmet, as well as maximum comfort. It has Sanitized treatment (antibacterial), DrySpeed (for excellent moisture absorption).
• Embracing Neck Profile roll for added comfort and protection.
• The interior is completely removable and washable.
• Side padding design optimized for glasses wearers.
• The new optical class 1 anti-scratch visor has been designed to offer a 190 degrees of horizontal vision. Includes a Pinlock (70). The screen is up to 4mm thick for added security.
• It has a micro-opening system for the screen.
• Integrated sun visor with anti-scratch treatment; easily removable without tools.
• The screen incorporates a patented closing system (VLS) that prevents its accidental opening.
• Chin cover included.
• Ready for generic communication systems.
• Micrometric closure system.
• It has P/J homologation to circulate in total safety both with the helmet closed in full-face mode and with the helmet open in jet mode.

Tear-off kit (3 pieces) for the AGV Race 3 Visor.

The 100% Max Vision Pinlock 120 fog resistant insert lens is our premium solution for AGV helmets. This lens has become the benchmark for fog resistant performance that is most commonly used by riders across the world. The insert is made of a moisture absorbing plastic and, therefore the surface basically dry when used. The insert has a silicone seal that creates a double shield system.

Compatible with: AGV Tourmodular helmets.

Scratch resistant, Max Pinlock ready visor. Compatible with: AGV Tourmodular helmets.

Features:

• 100% Polycarbonate
• 190° horizontal field of view
• 85° vertical field of view
• Anti-scratch
• High impact protection (up to 3mm thick)
• Max Pinlock not included
• Max Pinlock ready
• Optic class 1
• UV protective

Scratch resistant, Max Pinlock ready visor. Compatible with: AGV Tourmodular helmets.

Features:

• 100% Polycarbonate
• 190° horizontal field of view
• 85° vertical field of view
• Anti-scratch
• High impact protection (up to 3mm thick)
• Max Pinlock not included
• Max Pinlock ready
• Optic class 1
• UV protective

Scratch resistant, Max Pinlock ready visor. Compatible with: AGV Tourmodular helmets.

Features:

• 100% Polycarbonate
• 190° horizontal field of view
• 85° vertical field of view
• Anti-scratch
• High impact protection (up to 3mm thick)
• Max Pinlock not included
• Max Pinlock ready
• Optic class 1
• UV protective

Scratch resistant, Max Pinlock ready visor. Compatible with: AGV Tourmodular helmets.

Features:

• 100% Polycarbonate
• 190° horizontal field of view
• 85° vertical field of view
• Anti-scratch
• High impact protection (up to 3mm thick)
• Max Pinlock not included
• Max Pinlock ready
• Optic class 1
• UV protective

Historic shapes and colours meet modern design. The Legends helmets immortalize riders and achievements that will never be forgotten. Comfort, protection and ventilation are key elements of these helmets that meet today's highest standards.

Relive the 70's with the style that dominated adventure riding, the AGV X101 Helmet. A fiberglass constructed shell protects riders on the outside while the suede fabric interior keeps heads comfortable. The chin guard air vent was constructed to include a metal grill preventing dirt and debris from entering the helmet while cool air flows through. This goggle ready helmet also features a removable peak and fully removable cheek pads and helmet liner that are machine washable.

Features:

• Fiberglass construction
• 3 shell sizes
• Chin guard air vent
• Metal grill under the chin vent protects against dirt and debris
• Removable peak 
• Goggles ready
• Double D ring chinstrap
• Eco-leather and suede fabric interior
• Fully removable and washable liner and cheek pads

The Pinlock 70 fog resistant insert lens is our premium solution for AGV helmets. This lens has become the benchmark for fog resistant performance that is most commonly used by riders across the world. The insert is made of a moisture absorbing plastic and, therefore, the surface basically dry when used. The insert has a silicone seal that creates a double shield system.

Compatible with: AGV X3000 helmets.

AGV X3000 scratch resistant, anti-fog visor.

Features:

• 100% Polycarbonate
• Anti-fog
• Anti-scratch
• UV protective

AGV X3000 scratch resistant, anti-fog visor.

Features:

• 100% Polycarbonate
• Anti-fog
• Anti-scratch
• UV protective

Historic shapes and colours meet modern design. The Legends helmets immortalize riders and achievements that will never be forgotten. Comfort, protection and ventilation are key elements of these helmets that meet today's highest standards.

The AGV X3000 carries Agostini's signature and includes the contoured chin piece just as he liked it so that he could lean right up against the gas tank. It also features a dual button visor that can be opened with the left hand alone. While the exterior may look the same as it did in the 60's, the X3000 is packed with all the safety, ventilation and comfort you'd expect from a modern day AGV.

Features:

• ACF (Advanced Composite Fibre) fibreglass outer shell
• 3 shell sizes: XS-MS, ML-LG, XL-2XL
• Visor on/off air vent with channels hollowed in the shell
• Premium interior constructed of genuine leather and suede fabric with an embroidered logo
• Removable and washable interior (neck roll not removable)
• Double D-ring retention system

Historic shapes and colours meet modern design. The Legends helmets immortalize riders and achievements that will never be forgotten. Comfort, protection and ventilation are key elements of these helmets that meet today's highest standards.

The AGV X3000 carries Agostini's signature and includes the contoured chin piece just as he liked it so that he could lean right up against the gas tank. It also features a dual button visor that can be opened with the left hand alone. While the exterior may look the same as it did in the 60's, the X3000 is packed with all the safety, ventilation and comfort you'd expect from a modern day AGV.

Features:

• ACF (Advanced Composite Fibre) fibreglass outer shell
• 3 shell sizes: XS-MS, ML-LG, XL-2XL
• Visor on/off air vent with channels hollowed in the shell
• Premium interior constructed of genuine leather and suede fabric with an embroidered logo
• Removable and washable interior (neck roll not removable)
• Double D-ring retention system

Historic shapes and colours meet modern design. The Legends helmets immortalize riders and achievements that will never be forgotten. Comfort, protection and ventilation are key elements of these helmets that meet today's highest standards.

The AGV X3000 carries Agostini's signature and includes the contoured chin piece just as he liked it so that he could lean right up against the gas tank. It also features a dual button visor that can be opened with the left hand alone. While the exterior may look the same as it did in the 60's, the X3000 is packed with all the safety, ventilation and comfort you'd expect from a modern day AGV.

Features:

• ACF (Advanced Composite Fibre) fibreglass outer shell
• 3 shell sizes: XS-MS, ML-LG, XL-2XL
• Visor on/off air vent with channels hollowed in the shell
• Premium interior constructed of genuine leather and suede fabric with an embroidered logo
• Removable and washable interior (neck roll not removable)
• Double D-ring retention system

Historic shapes and colours meet modern design. The Legends helmets immortalize riders and achievements that will never be forgotten. Comfort, protection and ventilation are key elements of these helmets that meet today's highest standards.

The AGV X3000 carries Agostini's signature and includes the contoured chin piece just as he liked it so that he could lean right up against the gas tank. It also features a dual button visor that can be opened with the left hand alone. While the exterior may look the same as it did in the 60's, the X3000 is packed with all the safety, ventilation and comfort you'd expect from a modern day AGV.

Features:

• ACF (Advanced Composite Fibre) fibreglass outer shell
• 3 shell sizes: XS-MS, ML-LG, XL-2XL
• Visor on/off air vent with channels hollowed in the shell
• Premium interior constructed of genuine leather and suede fabric with an embroidered logo
• Removable and washable interior (neck roll not removable)
• Double D-ring retention system