AGV

The AGV Extreme Safety construction protocol means that the new K1 S exceeds the requirements of the most recent international standards, making it even safer. The shell is made of high-resistance thermoplastic material for minimal encumbrance while the inner shell is in multidensity EPS. The safe profile is designed to prevent injury to the collarbone.

ECE22.06 Approved

K1 S is the road helmet that comes out of AGV's experience in MotoGP™, suitable for a range of uses on any route.

The aerodynamic shape of its shell made of high-resistance thermoplastic material, the front air vents developed through racing experience and the new Aero Spoiler designed in the wind tunnel maximize performance and provide stability even at high speeds in sports riding.

The Ultravision scratch-resistant panoramic visor offers a wider lateral and vertical view, for total control of the surrounding environment. Uncompromising comfort, due to the soft, removable and washable Dry-Comfort interior.

The AGV Extreme Safety construction protocol means that K1 S meets the requirements of the stringent ECE22.06 standard and then some.

AGV K1 S is prepared for the installation of communication systems.

The AGV Extreme Safety construction protocol means that the new K1 S exceeds the requirements of the most recent international standards, making it even safer. The shell is made of high-resistance thermoplastic material for minimal encumbrance while the inner shell is in multidensity EPS. The safe profile is designed to prevent injury to the collarbone.

ECE22.06 Approved

K1 S is the road helmet that comes out of AGV's experience in MotoGP™, suitable for a range of uses on any route.

The aerodynamic shape of its shell made of high-resistance thermoplastic material, the front air vents developed through racing experience and the new Aero Spoiler designed in the wind tunnel maximize performance and provide stability even at high speeds in sports riding.

The Ultravision scratch-resistant panoramic visor offers a wider lateral and vertical view, for total control of the surrounding environment. Uncompromising comfort, due to the soft, removable and washable Dry-Comfort interior.

The AGV Extreme Safety construction protocol means that K1 S meets the requirements of the stringent ECE22.06 standard and then some.

AGV K1 S is prepared for the installation of communication systems.

The AGV Extreme Safety construction protocol means that the new K1 S exceeds the requirements of the most recent international standards, making it even safer. The shell is made of high-resistance thermoplastic material for minimal encumbrance while the inner shell is in multidensity EPS. The safe profile is designed to prevent injury to the collarbone.

ECE22.06 Approved

K1 S is the road helmet that comes out of AGV's experience in MotoGP™, suitable for a range of uses on any route.

The aerodynamic shape of its shell made of high-resistance thermoplastic material, the front air vents developed through racing experience and the new Aero Spoiler designed in the wind tunnel maximize performance and provide stability even at high speeds in sports riding.

The Ultravision scratch-resistant panoramic visor offers a wider lateral and vertical view, for total control of the surrounding environment. Uncompromising comfort, due to the soft, removable and washable Dry-Comfort interior.

The AGV Extreme Safety construction protocol means that K1 S meets the requirements of the stringent ECE22.06 standard and then some.

AGV K1 S is prepared for the installation of communication systems.

The best helmet for any use, made from technologies developed for MotoGP™.

Finally, a comfortable, versatile, and safe road helmet for any use, any motorbike, and any rider thanks to the same advanced materials and innovative technology used to help world champions achieve the maximum in the most extreme conditions.

Everything you need is now combined with everything you've ever wanted.

ECE22.06 Approved

A protection that exceeds every expectation

K6 S provides the security riders need to fully express themselves in any situation, due to its world championship level protection. The premium carbon-aramid fiber shell and five EPS densities offer the same protection that professional MotoGP™ riders are guaranteed. Due to the stringent AGV Extreme Safety design protocol, K6 S passes all the tests required by the strict ECE22.06 standard by a large margin, making the helmet safer than the levels required by the latest road homologations.
All this plus lightness like none other.

Every detail is designed to protect

Every detail of K6 S is designed to guarantee the safety of its wearer. The visor mechanisms are incredibly small, to maximize EPS on the surface and maximize the area covered by ​​the shell. The profile of the helmet is designed to minimize the chances of impact with the collarbone.
An AGV invention, now a racing world standard.

Ultravision: see more, under any circumstance

Exclusive AGV Ultravision guarantees 190° horizontal field of vision which means seeing the road, the corners, and the obstacles better, and ahead of time. The Optical Class 1 visor features the 100% Max Vision Pinlock 120 anti-fog system and is up to 4.3 mm thick. The Micro-Lock system allows the visor to be opened for air flow while keeping the visor securely fastened to the chinguard. High level characteristics that are designed to instill the confidence needed to win a world championship and that are now available on a helmet for any use.

Put it on, you barely feel it

Just 1255 grams. The premium materials used for the shell and the innovative technological solutions reduce the weight of the K6 S to a minimum, making it one of the lightest road helmets in the world. The lightest of all in its category. This lightness makes riding comfortable and reduces fatigue so that you can tackle even the longest trips without getting distracted.

The only thing you'll feel on your head is total comfort.

The quality of the interior really makes the difference

The interior of the K6 S is made of select materials developed by AGV to meet the needs of MotoGP™ riders who take on the most extreme conditions on track. The external liner is made of wear-proof, waterproof fabric that keeps water out even during the heaviest rainfall. The interior liner is made of a breathable fabric that absorbs sweat in record time, leaving your face dry at all times.

Perfect ventilation no matter what road you take

Five large air vents are positioned where the greatest air flow is so that you can personalize ventilation and get the most under any conditions. The central air vent is located at the point of maximum air pressure to ventilate inside the upper part of the helmet. The ergonomic shape of the adjusters is optimized for use while wearing gloves. The visor comes with the AGV Micro-Lock system which offers another air entry point without affecting the protective capacity at all.

Cuts through the air without moving: aerodynamics you can feel

Aerodynamics do not just help with lap times. Due to the exclusive design of its shell and its rear spoiler, K6 S splits the air and remains very stable even at high speeds. This is an advantage in terms of performance and comfort, both for sports riding on hairpin turns and during long trips on highways.
The K6 S design guarantees minimum aerodynamic resistance, making the most of the lift to obtain zero Z-lift at cruising speed. It means that at a speed of 130 km/h the helmet has a dynamic weight of zero.

You'll feel the difference, in any situation.

Always the right position for maximum performance

The K6 S is designed for optimal performance no matter the riding position, whether comfortable for cruising and sport touring, strenuous for traffic-filled city streets, or sporty, tucked inside the fairing. Its aerodynamic performance is exceptional regardless of what you're used to in order to meet every rider's need in any situation.

So balanced, it is even lighter

As if holding the record for lightness in the category weren't enough, the K6 S is designed to be highly balanced and have a neutral dynamic weight. The optimal load distribution means the bulk of the helmet is not felt on the head. It's like having all the advantages of a helmet without the fatigue of wearing one.

The new AGV K6 S, The comfort you need, the performance you've always wanted.

The AGV Extreme Safety construction protocol means that the new K3 exceeds the requirements of the most recent international standards. K3 has in fact passed by a wide margin the tests required by the ECE22.06 homologation, making it even safer.

ECE22.06 Approved

An AGV icon, evolving towards perfection. K3 is AGV's full-face road helmet that takes all the characteristics of a versatile, safe helmet to outstanding levels.

It offers safety for all, at the highest levels - the shell made of high-resistance thermoplastic material, the multi-density EPS and the details such as the collarbone-protection profile and the protective visor allow K3 to obtain the strict ECE22.06 homologation. Due to the AGV Extreme Safety construction protocol, K3 meets the requirements of the most recent international standards and then some.

Its strength lies in its versatility. K3 is designed to put in its best performance in all situations. The built-in sun visor, which can be operated conveniently with gloves on, assists when it?s too bright, and doesn?t block the front ventilation when it's in the rest position. The Pinlock Max Vision antifog system guarantees maximum visibility even on the wettest and coldest days, when the temperature difference between the environment and the inside of the helmet could cause the visor to fog up dangerously. Not with K3. The Ultravision visor also guarantees a 190° horizontal field of vision, so you can see obstacles, the road and everything in front of you earlier and better.

K3 is prepared for the installation of communication systems. The Eyewear Ready interior design allows you to comfortably wear your eyeglasses or sunglasses while riding.

Comfort boosts performance. The aerodynamic profile of the K3 is designed to achieve a dynamic weight of zero at a cruising speed of 130 km/h. It means lower weight and less strain on the neck muscles, for maximum concentration on riding. The interiors, made of 2DRY material with rapid absorption of sweat and moisture, can be customized, to personalize the fit to the full and maximize how comfortable it feels. The ventilation achieves maximum efficiency through the air vents at the front and on the chin, precise and easy to operate with gloves on.

The practical micrometric steel closing system permits quick, safe adjustment of the helmet fastening.

The best helmet for any use, made from technologies developed for MotoGP™.

Finally, a comfortable, versatile, and safe road helmet for any use, any motorbike, and any rider thanks to the same advanced materials and innovative technology used to help world champions achieve the maximum in the most extreme conditions.

Everything you need is now combined with everything you've ever wanted.

ECE22.06 Approved

A protection that exceeds every expectation

K6 S provides the security riders need to fully express themselves in any situation, due to its world championship level protection. The premium carbon-aramid fiber shell and five EPS densities offer the same protection that professional MotoGP™ riders are guaranteed. Due to the stringent AGV Extreme Safety design protocol, K6 S passes all the tests required by the strict ECE22.06 standard by a large margin, making the helmet safer than the levels required by the latest road homologations.
All this plus lightness like none other.

Every detail is designed to protect

Every detail of K6 S is designed to guarantee the safety of its wearer. The visor mechanisms are incredibly small, to maximize EPS on the surface and maximize the area covered by ​​the shell. The profile of the helmet is designed to minimize the chances of impact with the collarbone.
An AGV invention, now a racing world standard.

Ultravision: see more, under any circumstance

Exclusive AGV Ultravision guarantees 190° horizontal field of vision which means seeing the road, the corners, and the obstacles better, and ahead of time. The Optical Class 1 visor features the 100% Max Vision Pinlock 120 anti-fog system and is up to 4.3 mm thick. The Micro-Lock system allows the visor to be opened for air flow while keeping the visor securely fastened to the chinguard. High level characteristics that are designed to instill the confidence needed to win a world championship and that are now available on a helmet for any use.

Put it on, you barely feel it

Just 1255 grams. The premium materials used for the shell and the innovative technological solutions reduce the weight of the K6 S to a minimum, making it one of the lightest road helmets in the world. The lightest of all in its category. This lightness makes riding comfortable and reduces fatigue so that you can tackle even the longest trips without getting distracted.

The only thing you'll feel on your head is total comfort.

The quality of the interior really makes the difference

The interior of the K6 S is made of select materials developed by AGV to meet the needs of MotoGP™ riders who take on the most extreme conditions on track. The external liner is made of wear-proof, waterproof fabric that keeps water out even during the heaviest rainfall. The interior liner is made of a breathable fabric that absorbs sweat in record time, leaving your face dry at all times.

Perfect ventilation no matter what road you take

Five large air vents are positioned where the greatest air flow is so that you can personalize ventilation and get the most under any conditions. The central air vent is located at the point of maximum air pressure to ventilate inside the upper part of the helmet. The ergonomic shape of the adjusters is optimized for use while wearing gloves. The visor comes with the AGV Micro-Lock system which offers another air entry point without affecting the protective capacity at all.

Cuts through the air without moving: aerodynamics you can feel

Aerodynamics do not just help with lap times. Due to the exclusive design of its shell and its rear spoiler, K6 S splits the air and remains very stable even at high speeds. This is an advantage in terms of performance and comfort, both for sports riding on hairpin turns and during long trips on highways.
The K6 S design guarantees minimum aerodynamic resistance, making the most of the lift to obtain zero Z-lift at cruising speed. It means that at a speed of 130 km/h the helmet has a dynamic weight of zero.

You'll feel the difference, in any situation.

Always the right position for maximum performance

The K6 S is designed for optimal performance no matter the riding position, whether comfortable for cruising and sport touring, strenuous for traffic-filled city streets, or sporty, tucked inside the fairing. Its aerodynamic performance is exceptional regardless of what you're used to in order to meet every rider's need in any situation.

So balanced, it is even lighter

As if holding the record for lightness in the category weren't enough, the K6 S is designed to be highly balanced and have a neutral dynamic weight. The optimal load distribution means the bulk of the helmet is not felt on the head. It's like having all the advantages of a helmet without the fatigue of wearing one.

The new AGV K6 S, The comfort you need, the performance you've always wanted.

The best helmet for any use, made from technologies developed for MotoGP™.

Finally, a comfortable, versatile, and safe road helmet for any use, any motorbike, and any rider thanks to the same advanced materials and innovative technology used to help world champions achieve the maximum in the most extreme conditions.

Everything you need is now combined with everything you've ever wanted.

ECE22.06 Approved

A protection that exceeds every expectation

K6 S provides the security riders need to fully express themselves in any situation, due to its world championship level protection. The premium carbon-aramid fiber shell and five EPS densities offer the same protection that professional MotoGP™ riders are guaranteed. Due to the stringent AGV Extreme Safety design protocol, K6 S passes all the tests required by the strict ECE22.06 standard by a large margin, making the helmet safer than the levels required by the latest road homologations.
All this plus lightness like none other.

Every detail is designed to protect

Every detail of K6 S is designed to guarantee the safety of its wearer. The visor mechanisms are incredibly small, to maximize EPS on the surface and maximize the area covered by ​​the shell. The profile of the helmet is designed to minimize the chances of impact with the collarbone.
An AGV invention, now a racing world standard.

Ultravision: see more, under any circumstance

Exclusive AGV Ultravision guarantees 190° horizontal field of vision which means seeing the road, the corners, and the obstacles better, and ahead of time. The Optical Class 1 visor features the 100% Max Vision Pinlock 120 anti-fog system and is up to 4.3 mm thick. The Micro-Lock system allows the visor to be opened for air flow while keeping the visor securely fastened to the chinguard. High level characteristics that are designed to instill the confidence needed to win a world championship and that are now available on a helmet for any use.

Put it on, you barely feel it

Just 1255 grams. The premium materials used for the shell and the innovative technological solutions reduce the weight of the K6 S to a minimum, making it one of the lightest road helmets in the world. The lightest of all in its category. This lightness makes riding comfortable and reduces fatigue so that you can tackle even the longest trips without getting distracted.

The only thing you'll feel on your head is total comfort.

The quality of the interior really makes the difference

The interior of the K6 S is made of select materials developed by AGV to meet the needs of MotoGP™ riders who take on the most extreme conditions on track. The external liner is made of wear-proof, waterproof fabric that keeps water out even during the heaviest rainfall. The interior liner is made of a breathable fabric that absorbs sweat in record time, leaving your face dry at all times.

Perfect ventilation no matter what road you take

Five large air vents are positioned where the greatest air flow is so that you can personalize ventilation and get the most under any conditions. The central air vent is located at the point of maximum air pressure to ventilate inside the upper part of the helmet. The ergonomic shape of the adjusters is optimized for use while wearing gloves. The visor comes with the AGV Micro-Lock system which offers another air entry point without affecting the protective capacity at all.

Cuts through the air without moving: aerodynamics you can feel

Aerodynamics do not just help with lap times. Due to the exclusive design of its shell and its rear spoiler, K6 S splits the air and remains very stable even at high speeds. This is an advantage in terms of performance and comfort, both for sports riding on hairpin turns and during long trips on highways.
The K6 S design guarantees minimum aerodynamic resistance, making the most of the lift to obtain zero Z-lift at cruising speed. It means that at a speed of 130 km/h the helmet has a dynamic weight of zero.

You'll feel the difference, in any situation.

Always the right position for maximum performance

The K6 S is designed for optimal performance no matter the riding position, whether comfortable for cruising and sport touring, strenuous for traffic-filled city streets, or sporty, tucked inside the fairing. Its aerodynamic performance is exceptional regardless of what you're used to in order to meet every rider's need in any situation.

So balanced, it is even lighter

As if holding the record for lightness in the category weren't enough, the K6 S is designed to be highly balanced and have a neutral dynamic weight. The optimal load distribution means the bulk of the helmet is not felt on the head. It's like having all the advantages of a helmet without the fatigue of wearing one.

The new AGV K6 S, The comfort you need, the performance you've always wanted.

The AGV Extreme Safety construction protocol means that the new K3 exceeds the requirements of the most recent international standards. K3 has in fact passed by a wide margin the tests required by the ECE22.06 homologation, making it even safer.

ECE22.06 Approved

An AGV icon, evolving towards perfection. K3 is AGV's full-face road helmet that takes all the characteristics of a versatile, safe helmet to outstanding levels.

It offers safety for all, at the highest levels - the shell made of high-resistance thermoplastic material, the multi-density EPS and the details such as the collarbone-protection profile and the protective visor allow K3 to obtain the strict ECE22.06 homologation. Due to the AGV Extreme Safety construction protocol, K3 meets the requirements of the most recent international standards and then some.

Its strength lies in its versatility. K3 is designed to put in its best performance in all situations. The built-in sun visor, which can be operated conveniently with gloves on, assists when it?s too bright, and doesn?t block the front ventilation when it's in the rest position. The Pinlock Max Vision antifog system guarantees maximum visibility even on the wettest and coldest days, when the temperature difference between the environment and the inside of the helmet could cause the visor to fog up dangerously. Not with K3. The Ultravision visor also guarantees a 190° horizontal field of vision, so you can see obstacles, the road and everything in front of you earlier and better.

K3 is prepared for the installation of communication systems. The Eyewear Ready interior design allows you to comfortably wear your eyeglasses or sunglasses while riding.

Comfort boosts performance. The aerodynamic profile of the K3 is designed to achieve a dynamic weight of zero at a cruising speed of 130 km/h. It means lower weight and less strain on the neck muscles, for maximum concentration on riding. The interiors, made of 2DRY material with rapid absorption of sweat and moisture, can be customized, to personalize the fit to the full and maximize how comfortable it feels. The ventilation achieves maximum efficiency through the air vents at the front and on the chin, precise and easy to operate with gloves on.

The practical micrometric steel closing system permits quick, safe adjustment of the helmet fastening.

AGV’s latest version of this premium sport helmet now features a new construction for the inner liner, designed with high-performance fabrics and with no stitching in sensitive areas, making for an extremely comfortable fit.
The lightweight shell is made from a carbonfiberglass mix, while stability and aerodynamic performance are maximized thanks to an incorporated spoiler.
The Integrated Ventilation System (IVS) has vents that are hollowed into the shell, and there’s also an internal drop-down sun visor, a removable nose guard and a new wind protector that keeps noise to a minimum.

Features

• Shell in CAF (carbon-fiberglass)
• IVS (Integrated Ventilation System) with channels hollowed directly in the shell
• Double D retention system
• Sun visor
• Multi Density EPS
• The internal shape of the helmet was specifically designed to decrease the risk damage to the collar bones in the event of a fall
• Patented XQRS (Extra Quick Release System) visor mechanism in metal for very fast tool-free removal
• The visor is fitted with a patented micro-opening system
• Visor GT2 (ML-L-XL-XXL sizes) and GT2-1 (XS-S-MS sizes)
• Integrated spoiler
• Rear air extractors can be opened and closed
• Central air vent for optimal air flow
• Pinlock included in the box

AGV’s latest version of this premium sport helmet now features a new construction for the inner liner, designed with high-performance fabrics and with no stitching in sensitive areas, making for an extremely comfortable fit.
The lightweight shell is made from a carbonfiberglass mix, while stability and aerodynamic performance are maximized thanks to an incorporated spoiler.
The Integrated Ventilation System (IVS) has vents that are hollowed into the shell, and there’s also an internal drop-down sun visor, a removable nose guard and a new wind protector that keeps noise to a minimum.

Features

• Shell in CAF (carbon-fiberglass)
• IVS (Integrated Ventilation System) with channels hollowed directly in the shell
• Double D retention system
• Sun visor
• Multi Density EPS
• The internal shape of the helmet was specifically designed to decrease the risk damage to the collar bones in the event of a fall
• Patented XQRS (Extra Quick Release System) visor mechanism in metal for very fast tool-free removal
• The visor is fitted with a patented micro-opening system
• Visor GT2 (ML-L-XL-XXL sizes) and GT2-1 (XS-S-MS sizes)
• Integrated spoiler
• Rear air extractors can be opened and closed
• Central air vent for optimal air flow
• Pinlock included in the box

The AGV Extreme Safety construction protocol means that the new K1 S exceeds the requirements of the most recent international standards, making it even safer. The shell is made of high-resistance thermoplastic material for minimal encumbrance while the inner shell is in multidensity EPS. The safe profile is designed to prevent injury to the collarbone.

ECE22.06 Approved

K1 S is the road helmet that comes out of AGV's experience in MotoGP™, suitable for a range of uses on any route.

The aerodynamic shape of its shell made of high-resistance thermoplastic material, the front air vents developed through racing experience and the new Aero Spoiler designed in the wind tunnel maximize performance and provide stability even at high speeds in sports riding.

The Ultravision scratch-resistant panoramic visor offers a wider lateral and vertical view, for total control of the surrounding environment. Uncompromising comfort, due to the soft, removable and washable Dry-Comfort interior.

The AGV Extreme Safety construction protocol means that K1 S meets the requirements of the stringent ECE22.06 standard and then some.

AGV K1 S is prepared for the installation of communication systems.

The AGV Extreme Safety construction protocol means that the new K1 S exceeds the requirements of the most recent international standards, making it even safer. The shell is made of high-resistance thermoplastic material for minimal encumbrance while the inner shell is in multidensity EPS. The safe profile is designed to prevent injury to the collarbone.

ECE22.06 Approved

K1 S is the road helmet that comes out of AGV's experience in MotoGP™, suitable for a range of uses on any route.

The aerodynamic shape of its shell made of high-resistance thermoplastic material, the front air vents developed through racing experience and the new Aero Spoiler designed in the wind tunnel maximize performance and provide stability even at high speeds in sports riding.

The Ultravision scratch-resistant panoramic visor offers a wider lateral and vertical view, for total control of the surrounding environment. Uncompromising comfort, due to the soft, removable and washable Dry-Comfort interior.

The AGV Extreme Safety construction protocol means that K1 S meets the requirements of the stringent ECE22.06 standard and then some.

AGV K1 S is prepared for the installation of communication systems.

The AGV Extreme Safety construction protocol means that the new K3 exceeds the requirements of the most recent international standards. K3 has in fact passed by a wide margin the tests required by the ECE22.06 homologation, making it even safer.

ECE22.06 Approved

An AGV icon, evolving towards perfection. K3 is AGV's full-face road helmet that takes all the characteristics of a versatile, safe helmet to outstanding levels.

It offers safety for all, at the highest levels - the shell made of high-resistance thermoplastic material, the multi-density EPS and the details such as the collarbone-protection profile and the protective visor allow K3 to obtain the strict ECE22.06 homologation. Due to the AGV Extreme Safety construction protocol, K3 meets the requirements of the most recent international standards and then some.

Its strength lies in its versatility. K3 is designed to put in its best performance in all situations. The built-in sun visor, which can be operated conveniently with gloves on, assists when it?s too bright, and doesn?t block the front ventilation when it's in the rest position. The Pinlock Max Vision antifog system guarantees maximum visibility even on the wettest and coldest days, when the temperature difference between the environment and the inside of the helmet could cause the visor to fog up dangerously. Not with K3. The Ultravision visor also guarantees a 190° horizontal field of vision, so you can see obstacles, the road and everything in front of you earlier and better.

K3 is prepared for the installation of communication systems. The Eyewear Ready interior design allows you to comfortably wear your eyeglasses or sunglasses while riding.

Comfort boosts performance. The aerodynamic profile of the K3 is designed to achieve a dynamic weight of zero at a cruising speed of 130 km/h. It means lower weight and less strain on the neck muscles, for maximum concentration on riding. The interiors, made of 2DRY material with rapid absorption of sweat and moisture, can be customized, to personalize the fit to the full and maximize how comfortable it feels. The ventilation achieves maximum efficiency through the air vents at the front and on the chin, precise and easy to operate with gloves on.

The practical micrometric steel closing system permits quick, safe adjustment of the helmet fastening.

The AGV Extreme Safety construction protocol means that the new K3 exceeds the requirements of the most recent international standards. K3 has in fact passed by a wide margin the tests required by the ECE22.06 homologation, making it even safer.

ECE22.06 Approved

An AGV icon, evolving towards perfection. K3 is AGV's full-face road helmet that takes all the characteristics of a versatile, safe helmet to outstanding levels.

It offers safety for all, at the highest levels - the shell made of high-resistance thermoplastic material, the multi-density EPS and the details such as the collarbone-protection profile and the protective visor allow K3 to obtain the strict ECE22.06 homologation. Due to the AGV Extreme Safety construction protocol, K3 meets the requirements of the most recent international standards and then some.

Its strength lies in its versatility. K3 is designed to put in its best performance in all situations. The built-in sun visor, which can be operated conveniently with gloves on, assists when it?s too bright, and doesn?t block the front ventilation when it's in the rest position. The Pinlock Max Vision antifog system guarantees maximum visibility even on the wettest and coldest days, when the temperature difference between the environment and the inside of the helmet could cause the visor to fog up dangerously. Not with K3. The Ultravision visor also guarantees a 190° horizontal field of vision, so you can see obstacles, the road and everything in front of you earlier and better.

K3 is prepared for the installation of communication systems. The Eyewear Ready interior design allows you to comfortably wear your eyeglasses or sunglasses while riding.

Comfort boosts performance. The aerodynamic profile of the K3 is designed to achieve a dynamic weight of zero at a cruising speed of 130 km/h. It means lower weight and less strain on the neck muscles, for maximum concentration on riding. The interiors, made of 2DRY material with rapid absorption of sweat and moisture, can be customized, to personalize the fit to the full and maximize how comfortable it feels. The ventilation achieves maximum efficiency through the air vents at the front and on the chin, precise and easy to operate with gloves on.

The practical micrometric steel closing system permits quick, safe adjustment of the helmet fastening.

The AGV Extreme Safety construction protocol means that the new K1 S exceeds the requirements of the most recent international standards, making it even safer. The shell is made of high-resistance thermoplastic material for minimal encumbrance while the inner shell is in multidensity EPS. The safe profile is designed to prevent injury to the collarbone.

ECE22.06 Approved

K1 S is the road helmet that comes out of AGV's experience in MotoGP™, suitable for a range of uses on any route.

The aerodynamic shape of its shell made of high-resistance thermoplastic material, the front air vents developed through racing experience and the new Aero Spoiler designed in the wind tunnel maximize performance and provide stability even at high speeds in sports riding.

The Ultravision scratch-resistant panoramic visor offers a wider lateral and vertical view, for total control of the surrounding environment. Uncompromising comfort, due to the soft, removable and washable Dry-Comfort interior.

The AGV Extreme Safety construction protocol means that K1 S meets the requirements of the stringent ECE22.06 standard and then some.

AGV K1 S is prepared for the installation of communication systems.

The AGV K1 Helmet has an aerodynamic shape, ventilation scheme, and spoiler developed for the wind tunnel tested Corsa R and Pista GP R. The shell and spoiler provide aerodynamic stability at speed and the spoiler itself features a passive rear vent to extract warm air from the helmet as you ride. The K1 also incorporates the central air intake above the visor taken directly from MotoGP developed Pista GP R to provide best-in-class ventilation.

Features:

• HIR-TH (High Resistance Thermoplastic Resin) shell construction
• 2 shell sizes, 4 EPS sizes
• Integrated Ventilation System (IVS) was designed and optimized in a wind tunnel
• 5 front vents (3 at the forehead and 2 on the chin guard) and 2 rear extractors vents built into spoiler
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor is scratch-resistant and anti-fog polycarbonate with 100% UV protection and is offered in 2 sizes dependent on helmet size
  • GT 2-1 for helmet sizes XS, SM and MS and GT 2 for sizes ML, LG, XL and 2XL
• Micro-opening visor
• Fully removable and washable 3D inner liner and cheek pads are sanitized and made from Dry-Lex fabrics
• Helmet profile contoured around the base to reduce the risk of collar bone injuries
• Double-D ring chin strap
• DOT/ECE approved

The AGV K1 Helmet has an aerodynamic shape, ventilation scheme, and spoiler developed for the wind tunnel tested Corsa R and Pista GP R. The shell and spoiler provide aerodynamic stability at speed and the spoiler itself features a passive rear vent to extract warm air from the helmet as you ride. The K1 also incorporates the central air intake above the visor taken directly from MotoGP developed Pista GP R to provide best-in-class ventilation.

Features:

• HIR-TH (High Resistance Thermoplastic Resin) shell construction
• 2 shell sizes, 4 EPS sizes
• Integrated Ventilation System (IVS) was designed and optimized in a wind tunnel
• 5 front vents (3 at the forehead and 2 on the chin guard) and 2 rear extractors vents built into spoiler
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor is scratch-resistant and anti-fog polycarbonate with 100% UV protection and is offered in 2 sizes dependent on helmet size
  • GT 2-1 for helmet sizes XS, SM and MS and GT 2 for sizes ML, LG, XL and 2XL
• Micro-opening visor
• Fully removable and washable 3D inner liner and cheek pads are sanitized and made from Dry-Lex fabrics
• Helmet profile contoured around the base to reduce the risk of collar bone injuries
• Double-D ring chin strap
• DOT/ECE approved

The AGV K1 Helmet has an aerodynamic shape, ventilation scheme, and spoiler developed for the wind tunnel tested Corsa R and Pista GP R. The shell and spoiler provide aerodynamic stability at speed and the spoiler itself features a passive rear vent to extract warm air from the helmet as you ride. The K1 also incorporates the central air intake above the visor taken directly from MotoGP developed Pista GP R to provide best-in-class ventilation.

Features:

• HIR-TH (High Resistance Thermoplastic Resin) shell construction
• 2 shell sizes, 4 EPS sizes
• Integrated Ventilation System (IVS) was designed and optimized in a wind tunnel
• 5 front vents (3 at the forehead and 2 on the chin guard) and 2 rear extractors vents built into spoiler
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor is scratch-resistant and anti-fog polycarbonate with 100% UV protection and is offered in 2 sizes dependent on helmet size
  • GT 2-1 for helmet sizes XS, SM and MS and GT 2 for sizes ML, LG, XL and 2XL
• Micro-opening visor
• Fully removable and washable 3D inner liner and cheek pads are sanitized and made from Dry-Lex fabrics
• Helmet profile contoured around the base to reduce the risk of collar bone injuries
• Double-D ring chin strap
• DOT/ECE approved

The AGV K1 Helmet has an aerodynamic shape, ventilation scheme, and spoiler developed for the wind tunnel tested Corsa R and Pista GP R. The shell and spoiler provide aerodynamic stability at speed and the spoiler itself features a passive rear vent to extract warm air from the helmet as you ride. The K1 also incorporates the central air intake above the visor taken directly from MotoGP developed Pista GP R to provide best-in-class ventilation.

Features:

• HIR-TH (High Resistance Thermoplastic Resin) shell construction
• 2 shell sizes, 4 EPS sizes
• Integrated Ventilation System (IVS) was designed and optimized in a wind tunnel
• 5 front vents (3 at the forehead and 2 on the chin guard) and 2 rear extractors vents built into spoiler
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor is scratch-resistant and anti-fog polycarbonate with 100% UV protection and is offered in 2 sizes dependent on helmet size
  • GT 2-1 for helmet sizes XS, SM and MS and GT 2 for sizes ML, LG, XL and 2XL
• Micro-opening visor
• Fully removable and washable 3D inner liner and cheek pads are sanitized and made from Dry-Lex fabrics
• Helmet profile contoured around the base to reduce the risk of collar bone injuries
• Double-D ring chin strap
• DOT/ECE approved

The K3 SV was developed from the experience AGV gained during the design process of the Pista GP and Corsa helmets. Thanks to the use of Finite Element Analysis (FEM), the technical department developed a benchmark product in terms of comfort, aerodynamics and safety. This helmet has a wide appeal and is suitable for young riders with a passion for racing as well as for more mature riders looking for comfort and high performance characteristics.

Thanks to CFD Analysis (Computational fluid dynamics), the special ventilation system provides maximum airflow to the head through two front and side vents, one central vent and two extractors at the back of the helmet.

The sanitized Dry-Comfort internal components can be removed for washing. The mechanism for opening and closing the visor has three customisable settings according to helmet use (Touring, Race and City) and features the XQRS system for quick removal.

The K-3 SV has been designed to accept the new genreation bluetooth communication systems.


Features:

• 2 sizes of HIR-TH shell (High Resistance Thermoplastic Resin)
• Inner shell in EPS in 4 sizes; shell and EPS dimensions optimised using the FEM (Finite Elements Analysis) system
• Homologation: ECE 2205, DOT, JIS, NBR, AS/NZS
• Ventilation system designed and optimised in a wind tunnel, comprising 4 front vents (3 at the front and one on the chin guard) and 2 rear extractors
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor mechanism with PVS system (Perimetrical Visor Seal) for improved seal and protection against draughts and noise thanks to the seat for the visor edge
• GT 2 scratch-resistant, anti-fog polycarbonate visor with 100% protection from UV rays
• Integrated removable Sun Visor (ISV) with scratch-resistant visor with tool-free replacement system
• Removable breath deflector
• Removable windproof chin strap protection
• Fully removable and washable 3D inner liners
• Sanitised Dry-Comfort fabrics
• Micrometrically adjustable strap retention system
• Anti-theft ring on strap

The K3 SV was developed from the experience AGV gained during the design process of the Pista GP and Corsa helmets. Thanks to the use of Finite Element Analysis (FEM), the technical department developed a benchmark product in terms of comfort, aerodynamics and safety. This helmet has a wide appeal and is suitable for young riders with a passion for racing as well as for more mature riders looking for comfort and high performance characteristics.

Thanks to CFD Analysis (Computational fluid dynamics), the special ventilation system provides maximum airflow to the head through two front and side vents, one central vent and two extractors at the back of the helmet.

The sanitized Dry-Comfort internal components can be removed for washing. The mechanism for opening and closing the visor has three customisable settings according to helmet use (Touring, Race and City) and features the XQRS system for quick removal.

The K-3 SV has been designed to accept the new genreation bluetooth communication systems.


Features:

• 2 sizes of HIR-TH shell (High Resistance Thermoplastic Resin)
• Inner shell in EPS in 4 sizes; shell and EPS dimensions optimised using the FEM (Finite Elements Analysis) system
• Homologation: ECE 2205, DOT, JIS, NBR, AS/NZS
• Ventilation system designed and optimised in a wind tunnel, comprising 4 front vents (3 at the front and one on the chin guard) and 2 rear extractors
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor mechanism with PVS system (Perimetrical Visor Seal) for improved seal and protection against draughts and noise thanks to the seat for the visor edge
• GT 2 scratch-resistant, anti-fog polycarbonate visor with 100% protection from UV rays
• Integrated removable Sun Visor (ISV) with scratch-resistant visor with tool-free replacement system
• Removable breath deflector
• Removable windproof chin strap protection
• Fully removable and washable 3D inner liners
• Sanitised Dry-Comfort fabrics
• Micrometrically adjustable strap retention system
• Anti-theft ring on strap

The K3 SV was developed from the experience AGV gained during the design process of the Pista GP and Corsa helmets. Thanks to the use of Finite Element Analysis (FEM), the technical department developed a benchmark product in terms of comfort, aerodynamics and safety. This helmet has a wide appeal and is suitable for young riders with a passion for racing as well as for more mature riders looking for comfort and high performance characteristics.

Thanks to CFD Analysis (Computational fluid dynamics), the special ventilation system provides maximum airflow to the head through two front and side vents, one central vent and two extractors at the back of the helmet.

The sanitized Dry-Comfort internal components can be removed for washing. The mechanism for opening and closing the visor has three customisable settings according to helmet use (Touring, Race and City) and features the XQRS system for quick removal.

The K-3 SV has been designed to accept the new genreation bluetooth communication systems.


Features:

• 2 sizes of HIR-TH shell (High Resistance Thermoplastic Resin)
• Inner shell in EPS in 4 sizes; shell and EPS dimensions optimised using the FEM (Finite Elements Analysis) system
• Homologation: ECE 2205, DOT, JIS, NBR, AS/NZS
• Ventilation system designed and optimised in a wind tunnel, comprising 4 front vents (3 at the front and one on the chin guard) and 2 rear extractors
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor mechanism with PVS system (Perimetrical Visor Seal) for improved seal and protection against draughts and noise thanks to the seat for the visor edge
• GT 2 scratch-resistant, anti-fog polycarbonate visor with 100% protection from UV rays
• Integrated removable Sun Visor (ISV) with scratch-resistant visor with tool-free replacement system
• Removable breath deflector
• Removable windproof chin strap protection
• Fully removable and washable 3D inner liners
• Sanitised Dry-Comfort fabrics
• Micrometrically adjustable strap retention system
• Anti-theft ring on strap

AGV’s latest version of this premium sport helmet now features a new construction for the inner liner, designed with high-performance fabrics and with no stitching in sensitive areas, making for an extremely comfortable fit.
The lightweight shell is made from a carbonfiberglass mix, while stability and aerodynamic performance are maximized thanks to an incorporated spoiler.
The Integrated Ventilation System (IVS) has vents that are hollowed into the shell, and there’s also an internal drop-down sun visor, a removable nose guard and a new wind protector that keeps noise to a minimum.

Features

• Shell in CAF (carbon-fiberglass)
• IVS (Integrated Ventilation System) with channels hollowed directly in the shell
• Double D retention system
• Sun visor
• Multi Density EPS
• The internal shape of the helmet was specifically designed to decrease the risk damage to the collar bones in the event of a fall
• Patented XQRS (Extra Quick Release System) visor mechanism in metal for very fast tool-free removal
• The visor is fitted with a patented micro-opening system
• Visor GT2 (ML-L-XL-XXL sizes) and GT2-1 (XS-S-MS sizes)
• Integrated spoiler
• Rear air extractors can be opened and closed
• Central air vent for optimal air flow
• Pinlock included in the box

AGV’s latest version of this premium sport helmet now features a new construction for the inner liner, designed with high-performance fabrics and with no stitching in sensitive areas, making for an extremely comfortable fit.
The lightweight shell is made from a carbonfiberglass mix, while stability and aerodynamic performance are maximized thanks to an incorporated spoiler.
The Integrated Ventilation System (IVS) has vents that are hollowed into the shell, and there’s also an internal drop-down sun visor, a removable nose guard and a new wind protector that keeps noise to a minimum.

Features

• Shell in CAF (carbon-fiberglass)
• IVS (Integrated Ventilation System) with channels hollowed directly in the shell
• Double D retention system
• Sun visor
• Multi Density EPS
• The internal shape of the helmet was specifically designed to decrease the risk damage to the collar bones in the event of a fall
• Patented XQRS (Extra Quick Release System) visor mechanism in metal for very fast tool-free removal
• The visor is fitted with a patented micro-opening system
• Visor GT2 (ML-L-XL-XXL sizes) and GT2-1 (XS-S-MS sizes)
• Integrated spoiler
• Rear air extractors can be opened and closed
• Central air vent for optimal air flow
• Pinlock included in the box

The best helmet for any use, made from technologies developed for MotoGP™.

AGV fulfill all of your motorcycle helmet needs by harvesting the best characteristics from sport and touring helmets and infusing them into the AGV K6 Helmet. Its shell is comprised of carbon and aramid fibres for excellent protection - the K6's protective capacity is 48% higher than that required by legislation. All this plus lightness like none other. The helmet's versatility comes from its aerodynamic shape that works well in any riding position. Four different shell sizes allow for a broad size range to better fit your particular head circumference and shape. Moisture wicking liners absorb sweat to keep you comfortable on extended rides. The AGV K6 Helmet is the culmination of all of AGV's road helmet technology to create a single helmet for all riders. 

Features:

• Carbon-aramid shell
• 4 shell sizes: XS-SM, MS, ML-LG, XL-2XL
• 5 density EPS in 4 sizes
• Collarbone safe profile
• 5 adjustable front vents
• 1 wide rear vent
• Shell shaped designed to reduce turbulence and optimized for all riding positions
• Ritmo and Shalimar fabric cheek pads
• Shalimar fabric head liner
• Abrasion and water resistance neck roll for extra durability
• 2Dry moisture wicking system
• Eyeglasses friendly fit
• Removable breath guard included
• K6 helmet specific 4mm thick, anti-scratch Pinlock-ready visor
• Pinlock lens insert included
• Innovative shield pivot reduces size and weight
• Double-D chinstrap
• DOT and ECE approved

The best helmet for any use, made from technologies developed for MotoGP™.

AGV fulfill all of your motorcycle helmet needs by harvesting the best characteristics from sport and touring helmets and infusing them into the AGV K6 Helmet. Its shell is comprised of carbon and aramid fibres for excellent protection - the K6's protective capacity is 48% higher than that required by legislation. All this plus lightness like none other. The helmet's versatility comes from its aerodynamic shape that works well in any riding position. Four different shell sizes allow for a broad size range to better fit your particular head circumference and shape. Moisture wicking liners absorb sweat to keep you comfortable on extended rides. The AGV K6 Helmet is the culmination of all of AGV's road helmet technology to create a single helmet for all riders. 

Features:

• Carbon-aramid shell
• 4 shell sizes: XS-SM, MS, ML-LG, XL-2XL
• 5 density EPS in 4 sizes
• Collarbone safe profile
• 5 adjustable front vents
• 1 wide rear vent
• Shell shaped designed to reduce turbulence and optimized for all riding positions
• Ritmo and Shalimar fabric cheek pads
• Shalimar fabric head liner
• Abrasion and water resistance neck roll for extra durability
• 2Dry moisture wicking system
• Eyeglasses friendly fit
• Removable breath guard included
• K6 helmet specific 4mm thick, anti-scratch Pinlock-ready visor
• Pinlock lens insert included
• Innovative shield pivot reduces size and weight
• Double-D chinstrap
• DOT and ECE approved

AGV’s latest version of this premium sport helmet now features a new construction for the inner liner, designed with high-performance fabrics and with no stitching in sensitive areas, making for an extremely comfortable fit.
The lightweight shell is made from a carbonfiberglass mix, while stability and aerodynamic performance are maximized thanks to an incorporated spoiler.
The Integrated Ventilation System (IVS) has vents that are hollowed into the shell, and there’s also an internal drop-down sun visor, a removable nose guard and a new wind protector that keeps noise to a minimum.

Features

• Shell in CAF (carbon-fiberglass)
• IVS (Integrated Ventilation System) with channels hollowed directly in the shell
• Double D retention system
• Sun visor
• Multi Density EPS
• The internal shape of the helmet was specifically designed to decrease the risk damage to the collar bones in the event of a fall
• Patented XQRS (Extra Quick Release System) visor mechanism in metal for very fast tool-free removal
• The visor is fitted with a patented micro-opening system
• Visor GT2 (ML-L-XL-XXL sizes) and GT2-1 (XS-S-MS sizes)
• Integrated spoiler
• Rear air extractors can be opened and closed
• Central air vent for optimal air flow
• Pinlock included in the box

The AGV K1 Helmet has an aerodynamic shape, ventilation scheme, and spoiler developed for the wind tunnel tested Corsa R and Pista GP R. The shell and spoiler provide aerodynamic stability at speed and the spoiler itself features a passive rear vent to extract warm air from the helmet as you ride. The K1 also incorporates the central air intake above the visor taken directly from MotoGP developed Pista GP R to provide best-in-class ventilation.

Features:

• HIR-TH (High Resistance Thermoplastic Resin) shell construction
• 2 shell sizes, 4 EPS sizes
• Integrated Ventilation System (IVS) was designed and optimized in a wind tunnel
• 5 front vents (3 at the forehead and 2 on the chin guard) and 2 rear extractors vents built into spoiler
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor is scratch-resistant and anti-fog polycarbonate with 100% UV protection and is offered in 2 sizes dependent on helmet size
  • GT 2-1 for helmet sizes XS, SM and MS and GT 2 for sizes ML, LG, XL and 2XL
• Micro-opening visor
• Fully removable and washable 3D inner liner and cheek pads are sanitized and made from Dry-Lex fabrics
• Helmet profile contoured around the base to reduce the risk of collar bone injuries
• Double-D ring chin strap
• DOT/ECE approved

Historic shapes and colours meet modern design. The Legends helmets immortalize riders and achievements that will never be forgotten. Comfort, protection and ventilation are key elements of these helmets that meet today's highest standards.

The AGV X3000 carries Agostini's signature and includes the contoured chin piece just as he liked it so that he could lean right up against the gas tank. It also features a dual button visor that can be opened with the left hand alone. While the exterior may look the same as it did in the 60's, the X3000 is packed with all the safety, ventilation and comfort you'd expect from a modern day AGV.

Features:

• ACF (Advanced Composite Fibre) fibreglass outer shell
• 3 shell sizes: XS-MS, ML-LG, XL-2XL
• Visor on/off air vent with channels hollowed in the shell
• Premium interior constructed of genuine leather and suede fabric with an embroidered logo
• Removable and washable interior (neck roll not removable)
• Double D-ring retention system

Historic shapes and colours meet modern design. The Legends helmets immortalize riders and achievements that will never be forgotten. Comfort, protection and ventilation are key elements of these helmets that meet today's highest standards.

Relive the 70's with the style that dominated adventure riding, the AGV X101 Helmet. A fiberglass constructed shell protects riders on the outside while the suede fabric interior keeps heads comfortable. The chin guard air vent was constructed to include a metal grill preventing dirt and debris from entering the helmet while cool air flows through. This goggle ready helmet also features a removable peak and fully removable cheek pads and helmet liner that are machine washable.

Features:

• Fiberglass construction
• 3 shell sizes
• Chin guard air vent
• Metal grill under the chin vent protects against dirt and debris
• Removable peak 
• Goggles ready
• Double D ring chinstrap
• Eco-leather and suede fabric interior
• Fully removable and washable liner and cheek pads

The AGV K1 Helmet has an aerodynamic shape, ventilation scheme, and spoiler developed for the wind tunnel tested Corsa R and Pista GP R. The shell and spoiler provide aerodynamic stability at speed and the spoiler itself features a passive rear vent to extract warm air from the helmet as you ride. The K1 also incorporates the central air intake above the visor taken directly from MotoGP developed Pista GP R to provide best-in-class ventilation.

Features:

• HIR-TH (High Resistance Thermoplastic Resin) shell construction
• 2 shell sizes, 4 EPS sizes
• Integrated Ventilation System (IVS) was designed and optimized in a wind tunnel
• 5 front vents (3 at the forehead and 2 on the chin guard) and 2 rear extractors vents built into spoiler
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor is scratch-resistant and anti-fog polycarbonate with 100% UV protection and is offered in 2 sizes dependent on helmet size
  • GT 2-1 for helmet sizes XS, SM and MS and GT 2 for sizes ML, LG, XL and 2XL
• Micro-opening visor
• Fully removable and washable 3D inner liner and cheek pads are sanitized and made from Dry-Lex fabrics
• Helmet profile contoured around the base to reduce the risk of collar bone injuries
• Double-D ring chin strap
• DOT/ECE approved

The AGV K1 Helmet has an aerodynamic shape, ventilation scheme, and spoiler developed for the wind tunnel tested Corsa R and Pista GP R. The shell and spoiler provide aerodynamic stability at speed and the spoiler itself features a passive rear vent to extract warm air from the helmet as you ride. The K1 also incorporates the central air intake above the visor taken directly from MotoGP developed Pista GP R to provide best-in-class ventilation.

Features:

• HIR-TH (High Resistance Thermoplastic Resin) shell construction
• 2 shell sizes, 4 EPS sizes
• Integrated Ventilation System (IVS) was designed and optimized in a wind tunnel
• 5 front vents (3 at the forehead and 2 on the chin guard) and 2 rear extractors vents built into spoiler
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor is scratch-resistant and anti-fog polycarbonate with 100% UV protection and is offered in 2 sizes dependent on helmet size
  • GT 2-1 for helmet sizes XS, SM and MS and GT 2 for sizes ML, LG, XL and 2XL
• Micro-opening visor
• Fully removable and washable 3D inner liner and cheek pads are sanitized and made from Dry-Lex fabrics
• Helmet profile contoured around the base to reduce the risk of collar bone injuries
• Double-D ring chin strap
• DOT/ECE approved

The best helmet for any use, made from technologies developed for MotoGP™.

AGV fulfill all of your motorcycle helmet needs by harvesting the best characteristics from sport and touring helmets and infusing them into the AGV K6 Helmet. Its shell is comprised of carbon and aramid fibres for excellent protection - the K6's protective capacity is 48% higher than that required by legislation. All this plus lightness like none other. The helmet's versatility comes from its aerodynamic shape that works well in any riding position. Four different shell sizes allow for a broad size range to better fit your particular head circumference and shape. Moisture wicking liners absorb sweat to keep you comfortable on extended rides. The AGV K6 Helmet is the culmination of all of AGV's road helmet technology to create a single helmet for all riders. 

Features:

• Carbon-aramid shell
• 4 shell sizes: XS-SM, MS, ML-LG, XL-2XL
• 5 density EPS in 4 sizes
• Collarbone safe profile
• 5 adjustable front vents
• 1 wide rear vent
• Shell shaped designed to reduce turbulence and optimized for all riding positions
• Ritmo and Shalimar fabric cheek pads
• Shalimar fabric head liner
• Abrasion and water resistance neck roll for extra durability
• 2Dry moisture wicking system
• Eyeglasses friendly fit
• Removable breath guard included
• K6 helmet specific 4mm thick, anti-scratch Pinlock-ready visor
• Pinlock lens insert included
• Innovative shield pivot reduces size and weight
• Double-D chinstrap
• DOT and ECE approved

The K3 SV was developed from the experience AGV gained during the design process of the Pista GP and Corsa helmets. Thanks to the use of Finite Element Analysis (FEM), the technical department developed a benchmark product in terms of comfort, aerodynamics and safety. This helmet has a wide appeal and is suitable for young riders with a passion for racing as well as for more mature riders looking for comfort and high performance characteristics.

Thanks to CFD Analysis (Computational fluid dynamics), the special ventilation system provides maximum airflow to the head through two front and side vents, one central vent and two extractors at the back of the helmet.

The sanitized Dry-Comfort internal components can be removed for washing. The mechanism for opening and closing the visor has three customisable settings according to helmet use (Touring, Race and City) and features the XQRS system for quick removal.

The K-3 SV has been designed to accept the new genreation bluetooth communication systems.


Features:

• 2 sizes of HIR-TH shell (High Resistance Thermoplastic Resin)
• Inner shell in EPS in 4 sizes; shell and EPS dimensions optimised using the FEM (Finite Elements Analysis) system
• Homologation: ECE 2205, DOT, JIS, NBR, AS/NZS
• Ventilation system designed and optimised in a wind tunnel, comprising 4 front vents (3 at the front and one on the chin guard) and 2 rear extractors
• XQRS (X-tra Quick Release System) visor mechanism for tool-free removal and replacement of the visor in seconds
• Visor mechanism with PVS system (Perimetrical Visor Seal) for improved seal and protection against draughts and noise thanks to the seat for the visor edge
• GT 2 scratch-resistant, anti-fog polycarbonate visor with 100% protection from UV rays
• Integrated removable Sun Visor (ISV) with scratch-resistant visor with tool-free replacement system
• Removable breath deflector
• Removable windproof chin strap protection
• Fully removable and washable 3D inner liners
• Sanitised Dry-Comfort fabrics
• Micrometrically adjustable strap retention system
• Anti-theft ring on strap

AGV’s latest version of this premium sport helmet now features a new construction for the inner liner, designed with high-performance fabrics and with no stitching in sensitive areas, making for an extremely comfortable fit.
The lightweight shell is made from a carbonfiberglass mix, while stability and aerodynamic performance are maximized thanks to an incorporated spoiler.
The Integrated Ventilation System (IVS) has vents that are hollowed into the shell, and there’s also an internal drop-down sun visor, a removable nose guard and a new wind protector that keeps noise to a minimum.

Features

• Shell in CAF (carbon-fiberglass)
• IVS (Integrated Ventilation System) with channels hollowed directly in the shell
• Double D retention system
• Sun visor
• Multi Density EPS
• The internal shape of the helmet was specifically designed to decrease the risk damage to the collar bones in the event of a fall
• Patented XQRS (Extra Quick Release System) visor mechanism in metal for very fast tool-free removal
• The visor is fitted with a patented micro-opening system
• Visor GT2 (ML-L-XL-XXL sizes) and GT2-1 (XS-S-MS sizes)
• Integrated spoiler
• Rear air extractors can be opened and closed
• Central air vent for optimal air flow
• Pinlock included in the box

AGV’s latest version of this premium sport helmet now features a new construction for the inner liner, designed with high-performance fabrics and with no stitching in sensitive areas, making for an extremely comfortable fit.
The lightweight shell is made from a carbonfiberglass mix, while stability and aerodynamic performance are maximized thanks to an incorporated spoiler.
The Integrated Ventilation System (IVS) has vents that are hollowed into the shell, and there’s also an internal drop-down sun visor, a removable nose guard and a new wind protector that keeps noise to a minimum.

Features

• Shell in CAF (carbon-fiberglass)
• IVS (Integrated Ventilation System) with channels hollowed directly in the shell
• Double D retention system
• Sun visor
• Multi Density EPS
• The internal shape of the helmet was specifically designed to decrease the risk damage to the collar bones in the event of a fall
• Patented XQRS (Extra Quick Release System) visor mechanism in metal for very fast tool-free removal
• The visor is fitted with a patented micro-opening system
• Visor GT2 (ML-L-XL-XXL sizes) and GT2-1 (XS-S-MS sizes)
• Integrated spoiler
• Rear air extractors can be opened and closed
• Central air vent for optimal air flow
• Pinlock included in the box

AGV’s latest version of this premium sport helmet now features a new construction for the inner liner, designed with high-performance fabrics and with no stitching in sensitive areas, making for an extremely comfortable fit.
The lightweight shell is made from a carbonfiberglass mix, while stability and aerodynamic performance are maximized thanks to an incorporated spoiler.
The Integrated Ventilation System (IVS) has vents that are hollowed into the shell, and there’s also an internal drop-down sun visor, a removable nose guard and a new wind protector that keeps noise to a minimum.

Features

• Shell in CAF (carbon-fiberglass)
• IVS (Integrated Ventilation System) with channels hollowed directly in the shell
• Double D retention system
• Sun visor
• Multi Density EPS
• The internal shape of the helmet was specifically designed to decrease the risk damage to the collar bones in the event of a fall
• Patented XQRS (Extra Quick Release System) visor mechanism in metal for very fast tool-free removal
• The visor is fitted with a patented micro-opening system
• Visor GT2 (ML-L-XL-XXL sizes) and GT2-1 (XS-S-MS sizes)
• Integrated spoiler
• Rear air extractors can be opened and closed
• Central air vent for optimal air flow
• Pinlock included in the box

The best helmet for any use, made from technologies developed for MotoGP™.

AGV fulfill all of your motorcycle helmet needs by harvesting the best characteristics from sport and touring helmets and infusing them into the AGV K6 Helmet. Its shell is comprised of carbon and aramid fibres for excellent protection - the K6's protective capacity is 48% higher than that required by legislation. All this plus lightness like none other. The helmet's versatility comes from its aerodynamic shape that works well in any riding position. Four different shell sizes allow for a broad size range to better fit your particular head circumference and shape. Moisture wicking liners absorb sweat to keep you comfortable on extended rides. The AGV K6 Helmet is the culmination of all of AGV's road helmet technology to create a single helmet for all riders. 

Features:

• Carbon-aramid shell
• 4 shell sizes: XS-SM, MS, ML-LG, XL-2XL
• 5 density EPS in 4 sizes
• Collarbone safe profile
• 5 adjustable front vents
• 1 wide rear vent
• Shell shaped designed to reduce turbulence and optimized for all riding positions
• Ritmo and Shalimar fabric cheek pads
• Shalimar fabric head liner
• Abrasion and water resistance neck roll for extra durability
• 2Dry moisture wicking system
• Eyeglasses friendly fit
• Removable breath guard included
• K6 helmet specific 4mm thick, anti-scratch Pinlock-ready visor
• Pinlock lens insert included
• Innovative shield pivot reduces size and weight
• Double-D chinstrap
• DOT and ECE approved

The best helmet for any use, made from technologies developed for MotoGP™.

AGV fulfill all of your motorcycle helmet needs by harvesting the best characteristics from sport and touring helmets and infusing them into the AGV K6 Helmet. Its shell is comprised of carbon and aramid fibres for excellent protection - the K6's protective capacity is 48% higher than that required by legislation. All this plus lightness like none other. The helmet's versatility comes from its aerodynamic shape that works well in any riding position. Four different shell sizes allow for a broad size range to better fit your particular head circumference and shape. Moisture wicking liners absorb sweat to keep you comfortable on extended rides. The AGV K6 Helmet is the culmination of all of AGV's road helmet technology to create a single helmet for all riders. 

Features:

• Carbon-aramid shell
• 4 shell sizes: XS-SM, MS, ML-LG, XL-2XL
• 5 density EPS in 4 sizes
• Collarbone safe profile
• 5 adjustable front vents
• 1 wide rear vent
• Shell shaped designed to reduce turbulence and optimized for all riding positions
• Ritmo and Shalimar fabric cheek pads
• Shalimar fabric head liner
• Abrasion and water resistance neck roll for extra durability
• 2Dry moisture wicking system
• Eyeglasses friendly fit
• Removable breath guard included
• K6 helmet specific 4mm thick, anti-scratch Pinlock-ready visor
• Pinlock lens insert included
• Innovative shield pivot reduces size and weight
• Double-D chinstrap
• DOT and ECE approved